arm64: dts: mediatek: mt8183: add pwm node
Subsystems (2)
PATCH v2 1/2 arm64: dts: mediatek: mt8183: add pwm node
MT8183 SoC has 4 PWMs. Add the pwm node in order to support them.
---
V2: rename pwm0 to pwm1 since disp-pwm has been merged in v5.11 as pwm0
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
arch/arm64/boot/dts/mediatek/mt8183.dtsi +14 -0
@@ -667,6 +667,20 @@ pwm0: pwm@1100e000 { clock-names = "main", "mm"; }; + pwm1: pwm@11006000 { + compatible = "mediatek,mt8183-pwm"; + reg = <0 0x11006000 0 0x1000>; + #pwm-cells = <2>; + clocks = <&infracfg CLK_INFRA_PWM>, + <&infracfg CLK_INFRA_PWM_HCLK>, + <&infracfg CLK_INFRA_PWM1>, + <&infracfg CLK_INFRA_PWM2>, + <&infracfg CLK_INFRA_PWM3>, + <&infracfg CLK_INFRA_PWM4>; + clock-names = "top", "main", "pwm1", "pwm2", "pwm3", + "pwm4"; + }; + i2c3: i2c@1100f000 { compatible = "mediatek,mt8183-i2c"; reg = <0 0x1100f000 0 0x1000>,
Signature · 7 lines
2.29.2 _______________________________________________ Linux-mediatek mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-mediatek
PATCH v2 2/2 arm64: dts: mediatek: mt8183-evb: add PWM support
Enable the pwm driver and set the pinctrl for PWM A line.
---
V2:
* rename pwm0 to pwm1 since disp-pwm has been merged in v5.11 as pwm0
* rename the pio node and labels to match the coding standard of this dts
arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)
arch/arm64/boot/dts/mediatek/mt8183-evb.dts +12 -0
@@ -344,6 +344,12 @@ pins_spi{ bias-disable; }; }; + + pwm_pins_1: pwm1 { + pins_pwm { + pinmux = <PINMUX_GPIO90__FUNC_PWM_A>; + }; + }; }; &spi0 {
@@ -392,3 +398,9 @@ &spi5 { &uart0 { status = "okay"; }; + +&pwm1 { + status = "okay"; + pinctrl-0 = <&pwm_pins_1>; + pinctrl-names = "default"; +};
Signature · 7 lines
2.29.2 _______________________________________________ Linux-mediatek mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-mediatek
Re: [PATCH v2 2/2] arm64: dts: mediatek: mt8183-evb: add PWM support
Quoted 3 lines · Fabien Parent
Enable the pwm driver and set the pinctrl for PWM A line.
Signed-off-by Fabien Parent <[email protected]>
Applied to v5.11-next/dts64
Thanks
Quoted 28 lines
---
V2:
* rename pwm0 to pwm1 since disp-pwm has been merged in v5.11 as pwm0
* rename the pio node and labels to match the coding standard of this dtsarch/arm64/boot/dts/mediatek/mt8183-evb.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)arch/arm64/boot/dts/mediatek/mt8183-evb.dts +6
-0@@ -344,6 +344,12 @@ pins_spi{ bias-disable; }; }; + + pwm_pins_1: pwm1 { + pins_pwm { + pinmux = <PINMUX_GPIO90__FUNC_PWM_A>; + }; + }; }; &spi0 {
arch/arm64/boot/dts/mediatek/mt8183-evb.dts &spi5 { · line 406
Quoted 9 lines
arch/arm64/boot/dts/mediatek/mt8183-evb.dts +6
-0@@ -392,3 +398,9 @@ &spi5 { &uart0 { status = "okay"; }; + +&pwm1 { + status = "okay"; + pinctrl-0 = <&pwm_pins_1>; + pinctrl-names = "default"; +};
_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek
Quoted 3 lines · Fabien Parent
MT8183 SoC has 4 PWMs. Add the pwm node in order to support them.
Signed-off-by Fabien Parent <[email protected]>
Applied to v5.11-next/dts64
Thanks
Quoted 23 lines
---
V2: rename pwm0 to pwm1 since disp-pwm has been merged in v5.11 as pwm0
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+)arch/arm64/boot/dts/mediatek/mt8183.dtsi +7
-0@@ -667,6 +667,20 @@ pwm0: pwm@1100e000 { clock-names = "main", "mm"; }; + pwm1: pwm@11006000 { + compatible = "mediatek,mt8183-pwm"; + reg = <0 0x11006000 0 0x1000>; + #pwm-cells = <2>; + clocks = <&infracfg CLK_INFRA_PWM>, + <&infracfg CLK_INFRA_PWM_HCLK>, + <&infracfg CLK_INFRA_PWM1>,
arch/arm64/boot/dts/mediatek/mt8183.dtsi pwm0: pwm@1100e000 { · line 686
Quoted 10 lines
arch/arm64/boot/dts/mediatek/mt8183.dtsi +7
-0+ <&infracfg CLK_INFRA_PWM2>, + <&infracfg CLK_INFRA_PWM3>, + <&infracfg CLK_INFRA_PWM4>; + clock-names = "top", "main", "pwm1", "pwm2", "pwm3", + "pwm4"; + }; + i2c3: i2c@1100f000 { compatible = "mediatek,mt8183-i2c"; reg = <0 0x1100f000 0 0x1000>,
_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek