remoteproc: qcom_q6v5_mss: Don't require PAS for memory protection
PATCH 1/1 remoteproc: qcom_q6v5_mss: Don't require PAS for memory protection
Commit f3b1357673dd ("remoteproc: qcom_q6v5_mss: Switch to generic PAS TZ APIs") changed the probe-time gate for need_mem_protection platforms from qcom_scm_is_available() to qcom_pas_is_available(). Memory protection in this driver is implemented with qcom_scm_assign_mem(), which is a TZ service distinct from PAS. The only PAS call in the driver is qcom_pas_mem_setup(), and it is already guarded by need_pas_mem_setup.
No descriptor sets both flags: sc7180, sc7280, sdm660, sdm845, msm8996 and msm8998 set need_mem_protection only, while msm8937, msm8940 and msm8953 set need_pas_mem_setup only. On TrustZone firmware that does not implement PAS - for example SC7180 Chromebooks, where call-availability queries report every QCOM_SCM_SVC_PIL command as unavailable - the modem consequently never probes:
platform 4080000.remoteproc: deferred probe pending: (reason unknown)
On those machines the modem is also what loads the WLAN firmware, so ath10k never receives QMI and wifi does not come up either.
Gate memory protection on SCM availability as it was before, and require PAS only where a PAS call is actually issued. Keeping the SCM check
matters: qcom_scm_assign_mem() passes __scm->mempool to qcom_tzmem_alloc() without testing __scm, so dropping the gate entirely would allow a NULL dereference when qcom_scm has not yet probed.
---
Reported and analysed in:
https://lore.kernel.org/linux-arm-msm/[email protected]/
Konrad agreed with this shape in
https://lore.kernel.org/linux-arm-msm/[email protected]/
f3b1357673dd is not in mainline yet, so this is based on remoteproc/rproc-next; it would be good to get it in before that branch is sent on.
Tested on a Lenovo IdeaPad Duet 3 (sc7180-trogdor-wormdingler) on next-20260805, which carries the same code: with this applied the modem probes, mba/mpss load, and ath10k_snoc gets its QMI handshake so wifi comes up.
drivers/remoteproc/qcom_q6v5_mss.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
drivers/remoteproc/qcom_q6v5_mss.c +10 -1
@@ -2079,7 +2079,16 @@ static int q6v5_probe(struct platform_device *pdev)if (!desc)return -EINVAL ; -if (desc->need_mem_protection && !qcom_pas_is_available ()) +/* +* Memory protection is done through qcom_scm_assign_mem(), which needs +* SCM but not PAS. Only the memory setup path issues PAS calls, so +* requiring PAS for every need_mem_protection platform prevents the +* modem from probing at all on TZ firmware that offers no PAS. +*/ +if (desc->need_mem_protection && !qcom_scm_is_available ()) +return -EPROBE_DEFER ; + +if (desc->need_pas_mem_setup && !qcom_pas_is_available ())return -EPROBE_DEFER ; mba_image = desc->hexagon_mba_image;
base-commit: bb840ea69347aff7bde5a208e7b5b180669a7656
Signature · 1 line
2.55.0
Quoted 25 lines · Paul Hollinsky
Commit
f3b1357673dd("remoteproc:qcom_q6v5_mss: Switch to generic PAS TZ APIs") changed the probe-time gate forneed_mem_protectionplatforms fromqcom_scm_is_available()toqcom_pas_is_available(). Memory protection in this driver is implemented withqcom_scm_assign_mem(), which is a TZ service distinct from PAS. The only PAS call in the driver isqcom_pas_mem_setup(), and it is already guarded byneed_pas_mem_setup.No descriptor sets both flags: sc7180, sc7280, sdm660, sdm845, msm8996 and msm8998 set
need_mem_protectiononly, while msm8937, msm8940 and msm8953 setneed_pas_mem_setuponly. On TrustZone firmware that does not implement PAS - for example SC7180 Chromebooks, where call-availability queries report everyQCOM_SCM_SVC_PILcommand as unavailable - the modem consequently never probes:platform 4080000.remoteproc: deferred probe pending: (reason unknown)
On those machines the modem is also what loads the WLAN firmware, so ath10k never receives QMI and wifi does not come up either.
Gate memory protection on SCM availability as it was before, and require PAS only where a PAS call is actually issued. Keeping the SCM check
matters:qcom_scm_assign_mem()passes__scm->mempooltoqcom_tzmem_alloc()without testing__scm, so dropping the gate entirely would allow a NULL dereference whenqcom_scmhas not yet probed.
Quoted 4 lines
Fixes f3b1357673dd ("remoteproc: qcom_q6v5_mss: Switch to generic PAS TZ APIs")Signed-off-by Paul Hollinsky <[email protected]>---
Konrad
Quoted 25 lines · Paul Hollinsky
Commit
f3b1357673dd("remoteproc:qcom_q6v5_mss: Switch to generic PAS TZ APIs") changed the probe-time gate forneed_mem_protectionplatforms fromqcom_scm_is_available()toqcom_pas_is_available(). Memory protection in this driver is implemented withqcom_scm_assign_mem(), which is a TZ service distinct from PAS. The only PAS call in the driver isqcom_pas_mem_setup(), and it is already guarded byneed_pas_mem_setup.No descriptor sets both flags: sc7180, sc7280, sdm660, sdm845, msm8996 and msm8998 set
need_mem_protectiononly, while msm8937, msm8940 and msm8953 setneed_pas_mem_setuponly. On TrustZone firmware that does not implement PAS - for example SC7180 Chromebooks, where call-availability queries report everyQCOM_SCM_SVC_PILcommand as unavailable - the modem consequently never probes:platform 4080000.remoteproc: deferred probe pending: (reason unknown)
On those machines the modem is also what loads the WLAN firmware, so ath10k never receives QMI and wifi does not come up either.
Gate memory protection on SCM availability as it was before, and require PAS only where a PAS call is actually issued. Keeping the SCM check
matters:qcom_scm_assign_mem()passes__scm->mempooltoqcom_tzmem_alloc()without testing__scm, so dropping the gate entirely would allow a NULL dereference whenqcom_scmhas not yet probed.
Quoted 3 lines
Fixes f3b1357673dd ("remoteproc: qcom_q6v5_mss: Switch to generic PAS TZ APIs")Signed-off-by Paul Hollinsky <[email protected]>
Quoted 8 lines · Paul Hollinsky
Commit
f3b1357673dd("remoteproc:qcom_q6v5_mss: Switch to generic PAS TZ APIs") changed the probe-time gate forneed_mem_protectionplatforms fromqcom_scm_is_available()toqcom_pas_is_available(). Memory protection in this driver is implemented withqcom_scm_assign_mem(), which is a TZ service distinct from PAS. The only PAS call in the driver isqcom_pas_mem_setup(), and it is already guarded byneed_pas_mem_setup.[...]
Applied, thanks!
[1/1] remoteproc: qcom_q6v5_mss: Don't require PAS for memory protection
commit: b853857293584dd1f52183f70a2bdeca692a1e71
Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>
Quoted 6 lines · Paul Hollinsky
Commit
f3b1357673dd("remoteproc:qcom_q6v5_mss: Switch to generic PAS TZ APIs") changed the probe-time gate forneed_mem_protectionplatforms fromqcom_scm_is_available()toqcom_pas_is_available(). Memory protection in this driver is implemented withqcom_scm_assign_mem(), which is a TZ service distinct from PAS. The only PAS call in the driver isqcom_pas_mem_setup(), and it is already guarded byneed_pas_mem_setup.
Bjorn, will you send this fix for a 7.3 regression to Linus any time soon? It's in -next for two weeks now as b853857293584d ("remoteproc:qcom_q6v5_mss: Don't require PAS for memory protection") afaics, but from the branch name it sounds like it might be queued for merging in the next merge window.
Ciao, Thorsten
Quoted 63 lines
No descriptor sets both flags: sc7180, sc7280, sdm660, sdm845, msm8996 and msm8998 set
need_mem_protectiononly, while msm8937, msm8940 and msm8953 setneed_pas_mem_setuponly. On TrustZone firmware that does not implement PAS - for example SC7180 Chromebooks, where call-availability queries report everyQCOM_SCM_SVC_PILcommand as unavailable - the modem consequently never probes:platform 4080000.remoteproc: deferred probe pending: (reason unknown)
On those machines the modem is also what loads the WLAN firmware, so ath10k never receives QMI and wifi does not come up either.
Gate memory protection on SCM availability as it was before, and require PAS only where a PAS call is actually issued. Keeping the SCM check
matters:qcom_scm_assign_mem()passes__scm->mempooltoqcom_tzmem_alloc()without testing__scm, so dropping the gate entirely would allow a NULL dereference whenqcom_scmhas not yet probed.Fixes f3b1357673dd ("remoteproc: qcom_q6v5_mss: Switch to generic PAS TZ APIs")Signed-off-by Paul Hollinsky <[email protected]>---
Reported and analysed in:
https://lore.kernel.org/linux-arm-msm/[email protected]/
Konrad agreed with this shape in
https://lore.kernel.org/linux-arm-msm/[email protected]/
f3b1357673ddis not in mainline yet, so this is based on remoteproc/rproc-next; it would be good to get it in before that branch is sent on.Tested on a Lenovo IdeaPad Duet 3 (sc7180-trogdor-wormdingler) on next-20260805, which carries the same code: with this applied the modem probes, mba/mpss load, and
ath10k_snocgets its QMI handshake so wifi comes up.drivers/remoteproc/qcom_q6v5_mss.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)drivers/remoteproc/qcom_q6v5_mss.c +10
-1@@ -2079,7 +2079,16 @@ static int q6v5_probe(struct platform_device *pdev)if (!desc)return -EINVAL ; -if (desc->need_mem_protection && !qcom_pas_is_available ()) +/* +* Memory protection is done through qcom_scm_assign_mem(), which needs +* SCM but not PAS. Only the memory setup path issues PAS calls, so +* requiring PAS for every need_mem_protection platform prevents the +* modem from probing at all on TZ firmware that offers no PAS. +*/ +if (desc->need_mem_protection && !qcom_scm_is_available ()) +return -EPROBE_DEFER ; + +if (desc->need_pas_mem_setup && !qcom_pas_is_available ())return -EPROBE_DEFER ; mba_image = desc->hexagon_mba_image;base-commit:
bb840ea69347aff7bde5a208e7b5b180669a7656