Skip to contentSkip to conversation

ARM: Exynos5 : Add Power domain device tree support for MFC and GSC

PATCH New Prasanna Kumar 3 participants 12 messages Jan 9, 2013 – Feb 8, 2013

Subsystems (4)
Device tree bindings Arm (32-bit) Arm sub-architectures Arm Samsung Exynos
lore
Share & tools
lore

Prasanna Kumar

author
#0 lore raw

cover ARM: Exynos5 : Add Power domain device tree support for MFC and GSC

Hello all,

This patch set adds device tree support for power domains (Gscaler and MFC) of exynos5

Prasanna Kumar (2):
arm: exynos5: Enable PM generic domain support in Kconfig
ARM: dts: exynos5: Set up power domain for MFC and G-scaler

 arch/arm/boot/dts/exynos5250.dtsi |   15 +++++++++++++++
 arch/arm/mach-exynos/Kconfig      |    1 +
 2 files changed, 16 insertions(+), 0 deletions(-)
Signature · 1 line
1.7.5.4
author
#1 lore raw

PATCH 1/2 arm: exynos5: Enable PM generic domain support in Kconfig

This patch adds support to enable PM generic domains under Exynos5 family

Signed-off-by Prasanna Kumar <[email protected]>
---
 arch/arm/mach-exynos/Kconfig |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
arch/arm/mach-exynos/Kconfig +1 -0
index e103c29..871be97 100644
@@ -63,6 +63,7 @@ config SOC_EXYNOS5250
 	depends on ARCH_EXYNOS5
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
+	select PM_GENERIC_DOMAINS if PM
 	select S5P_DEV_MFC
 	select SAMSUNG_DMADEV
 	help
Signature · 1 line
1.7.5.4
#2 lore raw

PATCH 1/2 arm: exynos5: Enable PM generic domain support in Kconfig

Quoted 23 lines · Prasanna Kumar

This patch adds support to enable PM generic domains under Exynos5 family

Signed-off-by Prasanna Kumar <[email protected]>
---
 arch/arm/mach-exynos/Kconfig |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
arch/arm/mach- renamed from arch/arm/mach-exynos/Kconfig +0 -0

exynos/Kconfig
index e103c29..871be97 100644

arch/arm/mach-exynos/Kconfig +1 -1
@@ -63,6 +63,7 @@ config SOC_EXYNOS5250
 	depends on ARCH_EXYNOS5
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
+	select PM_GENERIC_DOMAINS if PM
 	select S5P_DEV_MFC
 	select SAMSUNG_DMADEV
 	help
--
Quoted 1 line

1.7.5.4

Firstly, this patch can be squashed into 2nd one. Secondly, please put the statements alphanumerically. Finally, please use the same format for subject like following:
"ARM: EXYNOS: ..."

Thanks.

- Kukjin

author
#3 lore raw

PATCH RESEND 1/1 ARM: EXYNOS: dts: Set up power domain for MFC and G-scaler

This patch adds device tree nodes for MFC and G-scaler power domains of exynos5250.It binds these power-domain nodes to repsective device tree nodes

It also adds support to enable PM generic domains for exynos5250.

Signed-off-by Prasanna Kumar <[email protected]>
---
 arch/arm/boot/dts/exynos5250.dtsi |   15 +++++++++++++++
 arch/arm/mach-exynos/Kconfig      |    1 +
 2 files changed, 16 insertions(+), 0 deletions(-)
arch/arm/boot/dts/exynos5250.dtsi +15 -0
index 30485de..6d0e87c 100644
@@ -85,6 +85,7 @@
 		compatible = "samsung,mfc-v6";
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
+		samsung,power-domain = <&pd_mfc>;
 	};
 
 	rtc {

@@ -554,28 +555,42 @@
 		};
 	};
 
+	pd_gsc: gsc-power-domain@0x10044000 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044000 0x20>;
+	};
+
+	pd_mfc: mfc-power-domain@0x10044040 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044040 0x20>;
+	};
+
 	gsc_0:  gsc@0x13e00000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
+		samsung,power-domain = <&pd_gsc>;
 	};
 
 	gsc_1:  gsc@0x13e10000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e10000 0x1000>;
 		interrupts = <0 86 0>;
+		samsung,power-domain = <&pd_gsc>;
 	};
 
 	gsc_2:  gsc@0x13e20000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e20000 0x1000>;
 		interrupts = <0 87 0>;
+		samsung,power-domain = <&pd_gsc>;
 	};
 
 	gsc_3:  gsc@0x13e30000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e30000 0x1000>;
 		interrupts = <0 88 0>;
+		samsung,power-domain = <&pd_gsc>;
 	};
 
 	hdmi {
arch/arm/mach-exynos/Kconfig +1 -0
index e103c29..96f4a9f 100644
@@ -61,6 +61,7 @@ config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
 	depends on ARCH_EXYNOS5
+	select PM_GENERIC_DOMAINS if PM
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
 	select S5P_DEV_MFC
Signature · 1 line
1.7.5.4
#4 lore raw

PATCH RESEND 1/1 ARM: EXYNOS: dts: Set up power domain for MFC and G-scaler

Quoted 30 lines · Prasanna Kumar

This patch adds device tree nodes for MFC and G-scaler power domains of exynos5250.It binds these power-domain nodes to repsective device tree nodes

It also adds support to enable PM generic domains for exynos5250.

Signed-off-by Prasanna Kumar <[email protected]>
---
 arch/arm/boot/dts/exynos5250.dtsi |   15 +++++++++++++++
 arch/arm/mach-exynos/Kconfig      |    1 +
 2 files changed, 16 insertions(+), 0 deletions(-)
arch/arm/boot/dts/exynos5250.dtsi +1 -0
index 30485de..6d0e87c 100644
@@ -85,6 +85,7 @@
 		compatible = "samsung,mfc-v6";
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
+		samsung,power-domain = <&pd_mfc>;
 	};
 
 	rtc {

@@ -554,28 +555,42 @@
 		};
 	};

arch/arm/boot/dts/exynos5250.dtsi line 567

Quoted 10 lines
arch/arm/boot/dts/exynos5250.dtsi +10 -0
+	pd_gsc: gsc-power-domain at 0x10044000 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044000 0x20>;
+	};
+
+	pd_mfc: mfc-power-domain at 0x10044040 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044040 0x20>;
+	};
+

Please put the above nodes by order of address.

Quoted 44 lines
arch/arm/boot/dts/exynos5250.dtsi +4 -0
 	gsc_0:  gsc at 0x13e00000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
+		samsung,power-domain = <&pd_gsc>;
 	};
 
 	gsc_1:  gsc at 0x13e10000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e10000 0x1000>;
 		interrupts = <0 86 0>;
+		samsung,power-domain = <&pd_gsc>;
 	};
 
 	gsc_2:  gsc at 0x13e20000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e20000 0x1000>;
 		interrupts = <0 87 0>;
+		samsung,power-domain = <&pd_gsc>;
 	};
 
 	gsc_3:  gsc at 0x13e30000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e30000 0x1000>;
 		interrupts = <0 88 0>;
+		samsung,power-domain = <&pd_gsc>;
 	};
 
 	hdmi {
arch/arm/mach- renamed from arch/arm/mach-exynos/Kconfig +0 -0

exynos/Kconfig
index e103c29..96f4a9f 100644

arch/arm/mach-exynos/Kconfig +1 -1
@@ -61,6 +61,7 @@ config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
 	depends on ARCH_EXYNOS5
+	select PM_GENERIC_DOMAINS if PM
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
 	select S5P_DEV_MFC
--

1.7.5.4

author
#5 lore raw

PATCH RESEND v2 1/1 ARM: EXYNOS: dts: Set up power domain for MFC and G-scaler

This patch adds device tree nodes for MFC and G-scaler power domains of exynos5250.It binds these power-domain nodes to repsective device tree nodes

It also adds support to enable PM generic domains for exynos5250.

Signed-off-by Prasanna Kumar <[email protected]>
---
 arch/arm/boot/dts/exynos5250.dtsi |   16 ++++++++++++++++
 arch/arm/mach-exynos/Kconfig      |    1 +
 2 files changed, 17 insertions(+), 0 deletions(-)
arch/arm/boot/dts/exynos5250.dtsi +16 -0
index 30485de..e282fde 100644
@@ -46,6 +46,16 @@
 		i2c8 = &i2c_8;
 	};
 
+	pd_gsc: gsc-power-domain@0x10044000 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044000 0x20>;
+	};
+
+	pd_mfc: mfc-power-domain@0x10044040 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044040 0x20>;
+	};
+
 	gic:interrupt-controller@10481000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;

@@ -85,6 +95,7 @@
 		compatible = "samsung,mfc-v6";
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
+		samsung,power-domain = <&pd_mfc>;
 	};
 
 	rtc {

@@ -554,28 +565,33 @@
 		};
 	};
 
+
 	gsc_0:  gsc@0x13e00000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
+		samsung,power-domain = <&pd_gsc>;
 	};
 
 	gsc_1:  gsc@0x13e10000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e10000 0x1000>;
 		interrupts = <0 86 0>;
+		samsung,power-domain = <&pd_gsc>;
 	};
 
 	gsc_2:  gsc@0x13e20000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e20000 0x1000>;
 		interrupts = <0 87 0>;
+		samsung,power-domain = <&pd_gsc>;
 	};
 
 	gsc_3:  gsc@0x13e30000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e30000 0x1000>;
 		interrupts = <0 88 0>;
+		samsung,power-domain = <&pd_gsc>;
 	};
 
 	hdmi {
arch/arm/mach-exynos/Kconfig +1 -0
index e103c29..96f4a9f 100644
@@ -61,6 +61,7 @@ config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
 	depends on ARCH_EXYNOS5
+	select PM_GENERIC_DOMAINS if PM
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
 	select S5P_DEV_MFC
Signature · 1 line
1.7.5.4
#6 lore raw

PATCH RESEND v2 1/1 ARM: EXYNOS: dts: Set up power domain for MFC and G-scaler

Hi kukjin,
I have put the above nodes by order of address.
Kindly review and ack the patch.

Quoted 94 lines · Prasanna Kumar

This patch adds device tree nodes for MFC and G-scaler power domains of exynos5250.It binds these power-domain nodes to repsective device tree nodes

It also adds support to enable PM generic domains for exynos5250.

Signed-off-by Prasanna Kumar <[email protected]>
---
 arch/arm/boot/dts/exynos5250.dtsi |   16 ++++++++++++++++
 arch/arm/mach-exynos/Kconfig      |    1 +
 2 files changed, 17 insertions(+), 0 deletions(-)
arch/arm/boot/dts/exynos5250.dtsi +16 -0
index 30485de..e282fde 100644
@@ -46,6 +46,16 @@
                i2c8 = &i2c_8;
        };
 
+       pd_gsc: gsc-power-domain at 0x10044000 {
+               compatible = "samsung,exynos4210-pd";
+               reg = <0x10044000 0x20>;
+       };
+
+       pd_mfc: mfc-power-domain at 0x10044040 {
+               compatible = "samsung,exynos4210-pd";
+               reg = <0x10044040 0x20>;
+       };
+
        gic:interrupt-controller at 10481000 {
                compatible = "arm,cortex-a9-gic";
                #interrupt-cells = <3>;

@@ -85,6 +95,7 @@
                compatible = "samsung,mfc-v6";
                reg = <0x11000000 0x10000>;
                interrupts = <0 96 0>;
+               samsung,power-domain = <&pd_mfc>;
        };
 
        rtc {

@@ -554,28 +565,33 @@
                };
        };
 
+
        gsc_0:  gsc at 0x13e00000 {
                compatible = "samsung,exynos5-gsc";
                reg = <0x13e00000 0x1000>;
                interrupts = <0 85 0>;
+               samsung,power-domain = <&pd_gsc>;
        };
 
        gsc_1:  gsc at 0x13e10000 {
                compatible = "samsung,exynos5-gsc";
                reg = <0x13e10000 0x1000>;
                interrupts = <0 86 0>;
+               samsung,power-domain = <&pd_gsc>;
        };
 
        gsc_2:  gsc at 0x13e20000 {
                compatible = "samsung,exynos5-gsc";
                reg = <0x13e20000 0x1000>;
                interrupts = <0 87 0>;
+               samsung,power-domain = <&pd_gsc>;
        };
 
        gsc_3:  gsc at 0x13e30000 {
                compatible = "samsung,exynos5-gsc";
                reg = <0x13e30000 0x1000>;
                interrupts = <0 88 0>;
+               samsung,power-domain = <&pd_gsc>;
        };
 
        hdmi {
arch/arm/mach-exynos/Kconfig +1 -1
index e103c29..96f4a9f 100644
@@ -61,6 +61,7 @@ config SOC_EXYNOS5250
        bool "SAMSUNG EXYNOS5250"
        default y
        depends on ARCH_EXYNOS5
+       select PM_GENERIC_DOMAINS if PM
        select S5P_PM if PM
        select S5P_SLEEP if PM
        select S5P_DEV_MFC
--

1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

Signature · 2 lines
Thanks
Prasanna Kumar
#7 lore raw

PATCH RESEND v2 1/1 ARM: EXYNOS: dts: Set up power domain for MFC and G-scaler

In reply to Prasanna Kumar
Quoted 91 lines · Prasanna Kumar

This patch adds device tree nodes for MFC and G-scaler power domains of exynos5250.It binds these power-domain nodes to repsective device tree nodes

It also adds support to enable PM generic domains for exynos5250.

Signed-off-by Prasanna Kumar <[email protected]>
---
 arch/arm/boot/dts/exynos5250.dtsi |   16 ++++++++++++++++
 arch/arm/mach-exynos/Kconfig      |    1 +
 2 files changed, 17 insertions(+), 0 deletions(-)
arch/arm/boot/dts/exynos5250.dtsi +16 -0
index 30485de..e282fde 100644
@@ -46,6 +46,16 @@
 		i2c8 = &i2c_8;
 	};
 
+	pd_gsc: gsc-power-domain at 0x10044000 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044000 0x20>;
+	};
+
+	pd_mfc: mfc-power-domain at 0x10044040 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044040 0x20>;
+	};
+
 	gic:interrupt-controller at 10481000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;

@@ -85,6 +95,7 @@
 		compatible = "samsung,mfc-v6";
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
+		samsung,power-domain = <&pd_mfc>;
 	};
 
 	rtc {

@@ -554,28 +565,33 @@
 		};
 	};
 
+
 	gsc_0:  gsc at 0x13e00000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
+		samsung,power-domain = <&pd_gsc>;
 	};
 
 	gsc_1:  gsc at 0x13e10000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e10000 0x1000>;
 		interrupts = <0 86 0>;
+		samsung,power-domain = <&pd_gsc>;
 	};
 
 	gsc_2:  gsc at 0x13e20000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e20000 0x1000>;
 		interrupts = <0 87 0>;
+		samsung,power-domain = <&pd_gsc>;
 	};
 
 	gsc_3:  gsc at 0x13e30000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e30000 0x1000>;
 		interrupts = <0 88 0>;
+		samsung,power-domain = <&pd_gsc>;
 	};
 
 	hdmi {
arch/arm/mach- renamed from arch/arm/mach-exynos/Kconfig +0 -0

exynos/Kconfig
index e103c29..96f4a9f 100644

arch/arm/mach-exynos/Kconfig +1 -1
@@ -61,6 +61,7 @@ config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
 	depends on ARCH_EXYNOS5
+	select PM_GENERIC_DOMAINS if PM
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
 	select S5P_DEV_MFC
--
Quoted 1 line

1.7.5.4

Looks OK to me, applied.

Thanks.

- Kukjin

author
#8 lore raw

PATCH 2/2 ARM: dts: exynos5: Set up power domain for MFC and G-scaler

In reply to Prasanna Kumar

This patch adds device tree nodes for MFC and G-scaler power domains of exynos5.It binds these power-domain nodes to repsective device tree nodes.

Signed-off-by Prasanna Kumar <[email protected]>
---
 arch/arm/boot/dts/exynos5250.dtsi |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)
arch/arm/boot/dts/exynos5250.dtsi +15 -0
index 30485de..6d0e87c 100644
@@ -85,6 +85,7 @@
 		compatible = "samsung,mfc-v6";
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
+		samsung,power-domain = <&pd_mfc>;
 	};
 
 	rtc {

@@ -554,28 +555,42 @@
 		};
 	};
 
+	pd_gsc: gsc-power-domain@0x10044000 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044000 0x20>;
+	};
+
+	pd_mfc: mfc-power-domain@0x10044040 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044040 0x20>;
+	};
+
 	gsc_0:  gsc@0x13e00000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
+		samsung,power-domain = <&pd_gsc>;
 	};
 
 	gsc_1:  gsc@0x13e10000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e10000 0x1000>;
 		interrupts = <0 86 0>;
+		samsung,power-domain = <&pd_gsc>;
 	};
 
 	gsc_2:  gsc@0x13e20000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e20000 0x1000>;
 		interrupts = <0 87 0>;
+		samsung,power-domain = <&pd_gsc>;
 	};
 
 	gsc_3:  gsc@0x13e30000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e30000 0x1000>;
 		interrupts = <0 88 0>;
+		samsung,power-domain = <&pd_gsc>;
 	};
 
 	hdmi {
Signature · 1 line
1.7.5.4
#9 lore raw

PATCH 2/2 ARM: dts: exynos5: Set up power domain for MFC and G-scaler

Hi Kukjin,

Kindly review this patch.

Quoted 70 lines · Prasanna Kumar

This patch adds device tree nodes for MFC and G-scaler power domains of exynos5.It binds these power-domain nodes to repsective device tree nodes.

Signed-off-by Prasanna Kumar <[email protected]>
---
 arch/arm/boot/dts/exynos5250.dtsi |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)
arch/arm/boot/dts/exynos5250.dtsi +15 -1
index 30485de..6d0e87c 100644
@@ -85,6 +85,7 @@
                compatible = "samsung,mfc-v6";
                reg = <0x11000000 0x10000>;
                interrupts = <0 96 0>;
+               samsung,power-domain = <&pd_mfc>;
        };
 
        rtc {

@@ -554,28 +555,42 @@
                };
        };
 
+       pd_gsc: gsc-power-domain at 0x10044000 {
+               compatible = "samsung,exynos4210-pd";
+               reg = <0x10044000 0x20>;
+       };
+
+       pd_mfc: mfc-power-domain at 0x10044040 {
+               compatible = "samsung,exynos4210-pd";
+               reg = <0x10044040 0x20>;
+       };
+
        gsc_0:  gsc at 0x13e00000 {
                compatible = "samsung,exynos5-gsc";
                reg = <0x13e00000 0x1000>;
                interrupts = <0 85 0>;
+               samsung,power-domain = <&pd_gsc>;
        };
 
        gsc_1:  gsc at 0x13e10000 {
                compatible = "samsung,exynos5-gsc";
                reg = <0x13e10000 0x1000>;
                interrupts = <0 86 0>;
+               samsung,power-domain = <&pd_gsc>;
        };
 
        gsc_2:  gsc at 0x13e20000 {
                compatible = "samsung,exynos5-gsc";
                reg = <0x13e20000 0x1000>;
                interrupts = <0 87 0>;
+               samsung,power-domain = <&pd_gsc>;
        };
 
        gsc_3:  gsc at 0x13e30000 {
                compatible = "samsung,exynos5-gsc";
                reg = <0x13e30000 0x1000>;
                interrupts = <0 88 0>;
+               samsung,power-domain = <&pd_gsc>;
        };
 
        hdmi {
--

1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

Signature · 2 lines
Thanks
Prasanna Kumar
#10 lore raw

cover ARM: Exynos5 : Add Power domain device tree support for MFC and GSC

In reply to Prasanna Kumar

Hello all,

Any comments for this patch set ?

Quoted 22 lines · Prasanna Kumar

Hello all,

This patch set adds device tree support for power domains (Gscaler and MFC) of exynos5

Prasanna Kumar (2):
arm: exynos5: Enable PM generic domain support in Kconfig
ARM: dts: exynos5: Set up power domain for MFC and G-scaler

 arch/arm/boot/dts/exynos5250.dtsi |   15 +++++++++++++++
 arch/arm/mach-exynos/Kconfig      |    1 +
 2 files changed, 16 insertions(+), 0 deletions(-)

--
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Signature · 2 lines
Thanks
Prasanna Kumar

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#11 lore raw

cover ARM: Exynos5 : Add Power domain device tree support for MFC and GSC

Hello ,

Any comments for this patch set ?

Quoted 26 lines · Prasanna Kumar
Quoted 14 lines

Hello all,

This patch set adds device tree support for power domains (Gscaler and MFC) of exynos5

Prasanna Kumar (2):
arm: exynos5: Enable PM generic domain support in Kconfig
ARM: dts: exynos5: Set up power domain for MFC and G-scaler

 arch/arm/boot/dts/exynos5250.dtsi |   15 +++++++++++++++
 arch/arm/mach-exynos/Kconfig      |    1 +
 2 files changed, 16 insertions(+), 0 deletions(-)
Quoted 7 lines

--
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

Quoted 3 lines

--
Thanks
Prasanna Kumar

--
Thanks
Prasanna Kumar