Skip to contentSkip to conversation

rpi: updates for v2020.07

GIT PULL Matthias Brugger 2 participants 2 messages May 14, 2020

lore
Share & tools
lore
#0 lore raw

Hi Tom,

Please have a look at the updates for RPi below.
I know I'm a bit late in the cycle. I'll try to send my pull requests earlier next time, sorry for that.

I just pushed the tag, so the CI is not green yet:
https://travis-ci.org/github/mbgg/u-boot/builds/686914330
https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi/pipelines/3241

But the tag actually refers to the same commit as my rpi-next branch, which is all green here:
https://travis-ci.org/github/mbgg/u-boot/builds/686541087
https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi/pipelines/3227

Regards and stay safe and healthy,
Matthias

---

The following changes since commit 2a38d2239d0bb4d128b00886bf097ab247a0b1a7:

Prepare v2020.07-rc2 (2020-05-11 18:28:19 -0400)

are available in the Git repository at:

https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi.git
tags/rpi-next-2020.07

for you to fetch changes up to 82aef6c6f8a74a0595501bfbb2f6f763c786324f:

rpi: use the newly-added RPI_EFI_NR_SPIN_PAGES (2020-05-13 14:04:50 +0200)

----------------------------------------------------------------
- fix phy configuration for RPi4's bcmgenet
- sync RPi4's env size with other RPi configs
- add kconfig option to reserver more pages in the EFI mem map
- add support for SDMA which is used by RPi4
- fix corner case boot bug for RPi3 32-bit

----------------------------------------------------------------
Jaehoon Chung (3):
mmc: sdhci: use phys2bus macro when dma address is accessed
mmc: sdhci: not return error when SDMA is not supported
configs: rpi_4 : enable SDHCI_SDMA config

Kyle Evans (2):
rpi: Kconfig option for initial page reservation
rpi: use the newly-added RPI_EFI_NR_SPIN_PAGES

Marek Szyprowski (1):
configs: rpi_arm64: sync env size with rpi_{3,4}_defconfig

Matthias Brugger (2):
mmc: sdhci: Use debug for not supported SDMA info message
configs: rpi_arm64: enable SDHCI SDMA support

Nicolas Saenz Julienne (1):
net: bcmgenet: Don't set ID_MODE_DIS when not using RGMII

Simon Glass (2):
arm: dts: bcm283x: Allow UARTs to work before relocation
arm: bcm283x: serial: Move ofdata reading to probe() method

 arch/arm/dts/bcm283x-u-boot.dtsi      |  8 ++++++++
 arch/arm/mach-bcm283x/Kconfig         |  2 ++
 board/raspberrypi/rpi/Kconfig         | 10 ++++++++++
 board/raspberrypi/rpi/rpi.c           |  3 ++-
 configs/rpi_4_32b_defconfig           |  1 +
 configs/rpi_4_defconfig               |  1 +
 configs/rpi_arm64_defconfig           |  2 ++
 drivers/mmc/sdhci.c                   | 17 +++++++++--------
 drivers/net/bcmgenet.c                |  5 ++++-
 drivers/serial/serial_bcm283x_mu.c    | 21 +++++++++------------
 drivers/serial/serial_bcm283x_pl011.c | 12 ++++++++----
 11 files changed, 56 insertions(+), 26 deletions(-)
 create mode 100644 board/raspberrypi/rpi/Kconfig
#1 lore raw
Quoted 10 lines · Matthias Brugger

Hi Tom,

Please have a look at the updates for RPi below.
I know I'm a bit late in the cycle. I'll try to send my pull requests earlier next time, sorry for that.

I just pushed the tag, so the CI is not green yet:
https://travis-ci.org/github/mbgg/u-boot/builds/686914330
https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi/pipelines/3241

Quoted 8 lines

But the tag actually refers to the same commit as my rpi-next branch, which is all green here:
https://travis-ci.org/github/mbgg/u-boot/builds/686541087
https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi/pipelines/3227

Regards and stay safe and healthy,
Matthias

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200514/d3b54c72/attachment.sig>