thermal: Use trip pointers in thermal driver interface
Subsystems (8)
cover thermal: Use trip pointers in thermal driver interface
Hi Everyone,
This material has been sent already:
https://lore.kernel.org/linux-pm/8409966.T7Z3S40VBb@kreacher/
but it has not got any traction, so resending it and I will assume no concerns if there is still no response.
This series modifies a few drivers to stop using trip IDs in its interactions with the core, which requires making assumptions regarding trip ordering that may not be met in the future, and there are other ways to do so that are preferred.
Having done that, it removes a few core functions that have no more users.
Thanks!
PATCH RESEND 1/8 thermal: broadcom: Use thermal_zone_get_crit_temp() in bcm2835_thermal_probe()
From: Rafael J. Wysocki <[email protected]>
Modify the bcm2835 thermal driver to use thermal_zone_get_crit_temp() in bcm2835_thermal_probe() instead of relying on the assumption that the critical trip index will always be 0.
--- drivers/thermal/broadcom/bcm2835_thermal.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/thermal/broadcom/bcm2835_thermal.c +3 -4
@@ -208,8 +208,7 @@ static int bcm2835_thermal_probe(struct*/ val =readl (data->regs +BCM2835_TS_TSENSCTL );if (!(val &BCM2835_TS_TSENSCTL_RSTB )) { -struct thermal_trip trip; -int offset, slope; +int offset, slope, crit_temp; slope =thermal_zone_get_slope (tz); offset =thermal_zone_get_offset (tz);
@@ -217,7 +216,7 @@ static int bcm2835_thermal_probe(struct* For now we deal only with critical, otherwise * would need to iterate */ - err =thermal_zone_get_trip (tz,0 , &trip); + err =thermal_zone_get_crit_temp (tz, &crit_temp);if (err <0 ) {dev_err (dev,"Not able to read trip_temp: %d\n" , err);return err;
@@ -232,7 +231,7 @@ static int bcm2835_thermal_probe(struct val |= (0xFE <<BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT );/* trip_adc value from info */ - val |=bcm2835_thermal_temp2adc (trip.temperature, + val |=bcm2835_thermal_temp2adc (crit_temp, offset, slope) <<BCM2835_TS_TSENSCTL_THOLD_SHIFT ;
Re: [RESEND][PATCH v1 1/8] thermal: broadcom: Use thermal_zone_get_crit_temp() in bcm2835_thermal_probe()
Quoted 7 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Modify the bcm2835 thermal driver to use
thermal_zone_get_crit_temp()inbcm2835_thermal_probe()instead of relying on the assumption that the critical trip index will always be 0.Signed-off-by Rafael J. Wysocki <[email protected]>
Signature · 1 line
Florian
Re: [RESEND][PATCH v1 1/8] thermal: broadcom: Use thermal_zone_get_crit_temp() in bcm2835_thermal_probe()
In reply to Rafael J. WysockiQuoted 38 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Modify the bcm2835 thermal driver to use
thermal_zone_get_crit_temp()inbcm2835_thermal_probe()instead of relying on the assumption that the critical trip index will always be 0.Signed-off-by Rafael J. Wysocki <[email protected]>--- drivers/thermal/broadcom/bcm2835_thermal.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)Index:
linux-pm/drivers/thermal/broadcom/bcm2835_thermal.c
===================================================================drivers/thermal/broadcom/bcm2835_thermal.c +2
-3@@ -208,8 +208,7 @@ static int bcm2835_thermal_probe(struct*/ val =readl (data->regs +BCM2835_TS_TSENSCTL );if (!(val &BCM2835_TS_TSENSCTL_RSTB )) { -struct thermal_trip trip; -int offset, slope; +int offset, slope, crit_temp; slope =thermal_zone_get_slope (tz); offset =thermal_zone_get_offset (tz);@@ -217,7 +216,7 @@ static int bcm2835_thermal_probe(struct* For now we deal only with critical, otherwise * would need to iterate */ - err =thermal_zone_get_trip (tz,0 , &trip); + err =thermal_zone_get_crit_temp (tz, &crit_temp);if (err <0 ) {dev_err (dev,"Not able to read trip_temp: %d\n" , err);return err;
drivers/thermal/broadcom/bcm2835_thermal.c static int bcm2835_thermal_probe(struct · line 237
Quoted 8 lines
drivers/thermal/broadcom/bcm2835_thermal.c +1
-1@@ -232,7 +231,7 @@ static int bcm2835_thermal_probe(struct val |= (0xFE <<BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT );/* trip_adc value from info */ - val |=bcm2835_thermal_temp2adc (trip.temperature, + val |=bcm2835_thermal_temp2adc (crit_temp, offset, slope) <<BCM2835_TS_TSENSCTL_THOLD_SHIFT ;
PATCH RESEND 2/8 thermal: hisi: Use thermal_zone_for_each_trip() in hisi_thermal_register_sensor()
In reply to Rafael J. WysockiFrom: Rafael J. Wysocki <[email protected]>
Modify hisi_thermal_register_sensor() to use thermal_zone_for_each_trip() for walking trip points instead of iterating over trip indices and using thermal_zone_get_trip() to get a struct thermal_trip pointer from a trip index.
---
This patch does not depend on the previous patch(es) in the series.
--- drivers/thermal/hisi_thermal.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-)
drivers/thermal/hisi_thermal.c +13 -9
@@ -465,6 +465,18 @@ static irqreturn_t hisi_thermal_alarm_irreturn IRQ_HANDLED ; } +static int hisi_trip_walk_cb (struct thermal_trip *trip,void *arg) +{ +struct hisi_thermal_sensor *sensor = arg; + +if (trip->type !=THERMAL_TRIP_PASSIVE ) +return 0 ; + + sensor->thres_temp = trip->temperature; +/* Return nonzero to terminate the search. */ +return 1 ; +} +static int hisi_thermal_register_sensor (struct platform_device *pdev,struct hisi_thermal_sensor *sensor) {
@@ -482,15 +494,7 @@ static int hisi_thermal_register_sensor(return ret; } -for (i =0 ; i <thermal_zone_get_num_trips (sensor->tzd); i++) { - -thermal_zone_get_trip (sensor->tzd, i, &trip); - -if (trip.type ==THERMAL_TRIP_PASSIVE ) { - sensor->thres_temp = trip.temperature; -break ; - } - } +thermal_zone_for_each_trip (sensor->tzd, hisi_trip_walk_cb, sensor);return 0 ; }
Re: [RESEND][PATCH v1 2/8] thermal: hisi: Use thermal_zone_for_each_trip() in hisi_thermal_register_sensor()
Quoted 49 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Modify
hisi_thermal_register_sensor()to usethermal_zone_for_each_trip()for walking trip points instead of iterating over trip indices and usingthermal_zone_get_trip()to get a structthermal_trippointer from a trip index.Signed-off-by Rafael J. Wysocki <[email protected]>---
This patch does not depend on the previous patch(es) in the series.
--- drivers/thermal/hisi_thermal.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-)Index:
linux-pm/drivers/thermal/hisi_thermal.c
===================================================================drivers/thermal/hisi_thermal.c +12
-3@@ -465,6 +465,18 @@ static irqreturn_t hisi_thermal_alarm_irreturn IRQ_HANDLED ; } +static int hisi_trip_walk_cb (struct thermal_trip *trip,void *arg) +{ +struct hisi_thermal_sensor *sensor = arg; + +if (trip->type !=THERMAL_TRIP_PASSIVE ) +return 0 ; + + sensor->thres_temp = trip->temperature; +/* Return nonzero to terminate the search. */ +return 1 ; +} +static int hisi_thermal_register_sensor (struct platform_device *pdev,struct hisi_thermal_sensor *sensor) {@@ -482,15 +494,7 @@ static int hisi_thermal_register_sensor(return ret; } -for (i =0 ; i <thermal_zone_get_num_trips (sensor->tzd); i++) { - -thermal_zone_get_trip (sensor->tzd, i, &trip);
drivers/thermal/hisi_thermal.c static int hisi_thermal_register_sensor( · line 500
Quoted 10 lines
drivers/thermal/hisi_thermal.c +1
-6- -if (trip.type ==THERMAL_TRIP_PASSIVE ) { - sensor->thres_temp = trip.temperature; -break ; - } - } +thermal_zone_for_each_trip (sensor->tzd, hisi_trip_walk_cb, sensor);return 0 ; }
PATCH v2 7/8 thermal: trip: Get rid of thermal_zone_get_num_trips()
In reply to Rafael J. WysockiFrom: Rafael J. Wysocki <[email protected]>
The only existing caller of thermal_zone_get_num_trips(), which is rcar_gen3_thermal_probe(), uses this function to put the number of trip points into a kernel log message, but this information is also available from the thermal sysfs interface.
For this reason, remove the thermal_zone_get_num_trips() call from rcar_gen3_thermal_probe() and drop the former altogether.
---
A new version, based on the discussion following the v1:
https://lore.kernel.org/linux-pm/[email protected]/
The Renesas driver change does not depend on the previous patches in the series.
--- drivers/thermal/renesas/rcar_gen3_thermal.c | 6 +----- drivers/thermal/thermal_trip.c | 6 ------ include/linux/thermal.h | 1 - 3 files changed, 1 insertion(+), 12 deletions(-)
drivers/thermal/renesas/rcar_gen3_thermal.c +1 -5
@@ -563,11 +563,7 @@ static int rcar_gen3_thermal_probe(strucif (ret) goto error_unregister; - ret =thermal_zone_get_num_trips (tsc->zone); -if (ret <0 ) - goto error_unregister; - -dev_info (dev,"Sensor %u: Loaded %d trip points\n" , i, ret); +dev_info (dev,"Sensor %u: Loaded\n" , i); }if (!priv->num_tscs) {
drivers/thermal/thermal_trip.c +0 -6
@@ -55,12 +55,6 @@ int thermal_zone_for_each_trip(struct th }EXPORT_SYMBOL_GPL (thermal_zone_for_each_trip); -int thermal_zone_get_num_trips (struct thermal_zone_device *tz) -{ -return tz->num_trips; -} -EXPORT_SYMBOL_GPL (thermal_zone_get_num_trips); -/** * thermal_zone_set_trips - Computes the next trip points for the driver * @tz: a pointer to a thermal zone device structure
include/linux/thermal.h +0 -1
@@ -210,7 +210,6 @@ int for_each_thermal_trip(struct thermalint thermal_zone_for_each_trip (struct thermal_zone_device *tz,int (*cb)(struct thermal_trip *,void *),void *data); -int thermal_zone_get_num_trips (struct thermal_zone_device *tz);void thermal_zone_set_trip_temp (struct thermal_zone_device *tz,struct thermal_trip *trip,int temp);
Re: [PATCH v2 7/8] thermal: trip: Get rid of thermal_zone_get_num_trips()
Hi Rafael,
Thanks for your work.
Quoted 11 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
The only existing caller of
thermal_zone_get_num_trips(), which isrcar_gen3_thermal_probe(), uses this function to put the number of trip points into a kernel log message, but this information is also available from the thermal sysfs interface.For this reason, remove the
thermal_zone_get_num_trips()call fromrcar_gen3_thermal_probe()and drop the former altogether.Signed-off-by Rafael J. Wysocki <[email protected]>
Quoted 64 lines
---
A new version, based on the discussion following the v1:
https://lore.kernel.org/linux-pm/[email protected]/
The Renesas driver change does not depend on the previous patches in the series.
--- drivers/thermal/renesas/rcar_gen3_thermal.c | 6 +----- drivers/thermal/thermal_trip.c | 6 ------ include/linux/thermal.h | 1 - 3 files changed, 1 insertion(+), 12 deletions(-)Index:
linux-pm/drivers/thermal/renesas/rcar_gen3_thermal.c
===================================================================drivers/thermal/renesas/rcar_gen3_thermal.c +1
-5@@ -563,11 +563,7 @@ static int rcar_gen3_thermal_probe(strucif (ret) goto error_unregister; - ret =thermal_zone_get_num_trips (tsc->zone); -if (ret <0 ) - goto error_unregister; - -dev_info (dev,"Sensor %u: Loaded %d trip points\n" , i, ret); +dev_info (dev,"Sensor %u: Loaded\n" , i); }if (!priv->num_tscs) {Index:
linux-pm/drivers/thermal/thermal_trip.c
===================================================================drivers/thermal/thermal_trip.c +0
-6@@ -55,12 +55,6 @@ int thermal_zone_for_each_trip(struct th }EXPORT_SYMBOL_GPL (thermal_zone_for_each_trip); -int thermal_zone_get_num_trips (struct thermal_zone_device *tz) -{ -return tz->num_trips; -} -EXPORT_SYMBOL_GPL (thermal_zone_get_num_trips); -/** * thermal_zone_set_trips - Computes the next trip points for the driver * @tz: a pointer to a thermal zone device structure Index:
linux-pm/include/linux/thermal.h
===================================================================include/linux/thermal.h +0
-1@@ -210,7 +210,6 @@ int for_each_thermal_trip(struct thermalint thermal_zone_for_each_trip (struct thermal_zone_device *tz,int (*cb)(struct thermal_trip *,void *),void *data); -int thermal_zone_get_num_trips (struct thermal_zone_device *tz);void thermal_zone_set_trip_temp (struct thermal_zone_device *tz,struct thermal_trip *trip,int temp);
Signature · 2 lines
Kind Regards, Niklas Söderlund
Re: [PATCH v2 7/8] thermal: trip: Get rid of thermal_zone_get_num_trips()
In reply to Rafael J. WysockiQuoted 68 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
The only existing caller of
thermal_zone_get_num_trips(), which isrcar_gen3_thermal_probe(), uses this function to put the number of trip points into a kernel log message, but this information is also available from the thermal sysfs interface.For this reason, remove the
thermal_zone_get_num_trips()call fromrcar_gen3_thermal_probe()and drop the former altogether.Signed-off-by Rafael J. Wysocki <[email protected]>---
A new version, based on the discussion following the v1:
https://lore.kernel.org/linux-pm/[email protected]/
The Renesas driver change does not depend on the previous patches in the series.
--- drivers/thermal/renesas/rcar_gen3_thermal.c | 6 +----- drivers/thermal/thermal_trip.c | 6 ------ include/linux/thermal.h | 1 - 3 files changed, 1 insertion(+), 12 deletions(-)Index:
linux-pm/drivers/thermal/renesas/rcar_gen3_thermal.c
===================================================================drivers/thermal/renesas/rcar_gen3_thermal.c +1
-5@@ -563,11 +563,7 @@ static int rcar_gen3_thermal_probe(strucif (ret) goto error_unregister; - ret =thermal_zone_get_num_trips (tsc->zone); -if (ret <0 ) - goto error_unregister; - -dev_info (dev,"Sensor %u: Loaded %d trip points\n" , i, ret); +dev_info (dev,"Sensor %u: Loaded\n" , i); }if (!priv->num_tscs) {Index:
linux-pm/drivers/thermal/thermal_trip.c
===================================================================drivers/thermal/thermal_trip.c +0
-6@@ -55,12 +55,6 @@ int thermal_zone_for_each_trip(struct th }EXPORT_SYMBOL_GPL (thermal_zone_for_each_trip); -int thermal_zone_get_num_trips (struct thermal_zone_device *tz) -{ -return tz->num_trips; -} -EXPORT_SYMBOL_GPL (thermal_zone_get_num_trips); -/** * thermal_zone_set_trips - Computes the next trip points for the driver * @tz: a pointer to a thermal zone device structure Index:
linux-pm/include/linux/thermal.h
===================================================================
include/linux/thermal.h int for_each_thermal_trip(struct thermal · line 215
Quoted 7 lines
include/linux/thermal.h +0
-1@@ -210,7 +210,6 @@ int for_each_thermal_trip(struct thermalint thermal_zone_for_each_trip (struct thermal_zone_device *tz,int (*cb)(struct thermal_trip *,void *),void *data); -int thermal_zone_get_num_trips (struct thermal_zone_device *tz);void thermal_zone_set_trip_temp (struct thermal_zone_device *tz,struct thermal_trip *trip,int temp);
PATCH RESEND 3/8 thermal: qcom: Use thermal_zone_get_crit_temp() in qpnp_tm_init()
In reply to Rafael J. WysockiFrom: Rafael J. Wysocki <[email protected]>
Modify qpnp_tm_init() to use thermal_zone_get_crit_temp() to get the critical trip temperature instead of iterating over trip indices and using thermal_zone_get_trip() to get a struct thermal_trip pointer from a trip index until it finds the critical one.
---
This patch does not depend on the previous patch(es) in the series.
--- drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 22 +++------------------- 1 file changed, 3 insertions(+), 19 deletions(-)
drivers/thermal/qcom/qcom-spmi-temp-alarm.c +3 -19
@@ -291,24 +291,6 @@ static irqreturn_t qpnp_tm_isr(int irq,return IRQ_HANDLED ; } -static int qpnp_tm_get_critical_trip_temp (struct qpnp_tm_chip *chip) -{ -struct thermal_trip trip; -int i, ret; - -for (i =0 ; i <thermal_zone_get_num_trips (chip->tz_dev); i++) { - - ret =thermal_zone_get_trip (chip->tz_dev, i, &trip); -if (ret) -continue ; - -if (trip.type ==THERMAL_TRIP_CRITICAL ) -return trip.temperature; - } - -return THERMAL_TEMP_INVALID ; -} -/* * This function initializes the internal temp value based on only the * current thermal stage and threshold. Setup threshold control and
@@ -343,7 +325,9 @@ static int qpnp_tm_init(struct qpnp_tm_cmutex_unlock (&chip->lock); - crit_temp =qpnp_tm_get_critical_trip_temp (chip); + ret =thermal_zone_get_crit_temp (chip->tz_dev, &crit_temp); +if (ret) + crit_temp =THERMAL_TEMP_INVALID ;mutex_lock (&chip->lock);
Re: [RESEND][PATCH v1 3/8] thermal: qcom: Use thermal_zone_get_crit_temp() in qpnp_tm_init()
Quoted 49 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Modify
qpnp_tm_init()to usethermal_zone_get_crit_temp()to get the critical trip temperature instead of iterating over trip indices and usingthermal_zone_get_trip()to get a structthermal_trippointer from a trip index until it finds the critical one.Signed-off-by Rafael J. Wysocki <[email protected]>---
This patch does not depend on the previous patch(es) in the series.
--- drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 22 +++------------------- 1 file changed, 3 insertions(+), 19 deletions(-)Index:
linux-pm/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
===================================================================drivers/thermal/qcom/qcom-spmi-temp-alarm.c +0
-18@@ -291,24 +291,6 @@ static irqreturn_t qpnp_tm_isr(int irq,return IRQ_HANDLED ; } -static int qpnp_tm_get_critical_trip_temp (struct qpnp_tm_chip *chip) -{ -struct thermal_trip trip; -int i, ret; - -for (i =0 ; i <thermal_zone_get_num_trips (chip->tz_dev); i++) { - - ret =thermal_zone_get_trip (chip->tz_dev, i, &trip); -if (ret) -continue ; - -if (trip.type ==THERMAL_TRIP_CRITICAL ) -return trip.temperature; - } - -return THERMAL_TEMP_INVALID ; -} -/* * This function initializes the internal temp value based on only the * current thermal stage and threshold. Setup threshold control and
drivers/thermal/qcom/qcom-spmi-temp-alarm.c static int qpnp_tm_init(struct qpnp_tm_c · line 333
Quoted 10 lines
drivers/thermal/qcom/qcom-spmi-temp-alarm.c +3
-1@@ -343,7 +325,9 @@ static int qpnp_tm_init(struct qpnp_tm_cmutex_unlock (&chip->lock); - crit_temp =qpnp_tm_get_critical_trip_temp (chip); + ret =thermal_zone_get_crit_temp (chip->tz_dev, &crit_temp); +if (ret) + crit_temp =THERMAL_TEMP_INVALID ;mutex_lock (&chip->lock);
Re: [RESEND][PATCH v1 3/8] thermal: qcom: Use thermal_zone_get_crit_temp() in qpnp_tm_init()
In reply to Rafael J. WysockiQuoted 9 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Modify
qpnp_tm_init()to usethermal_zone_get_crit_temp()to get the critical trip temperature instead of iterating over trip indices and usingthermal_zone_get_trip()to get a structthermal_trippointer from a trip index until it finds the critical one.Signed-off-by Rafael J. Wysocki <[email protected]>
Makes sense.
Quoted 51 lines
---
This patch does not depend on the previous patch(es) in the series.
--- drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 22 +++------------------- 1 file changed, 3 insertions(+), 19 deletions(-)Index:
linux-pm/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
===================================================================drivers/thermal/qcom/qcom-spmi-temp-alarm.c +3
-19@@ -291,24 +291,6 @@ static irqreturn_t qpnp_tm_isr(int irq,return IRQ_HANDLED ; } -static int qpnp_tm_get_critical_trip_temp (struct qpnp_tm_chip *chip) -{ -struct thermal_trip trip; -int i, ret; - -for (i =0 ; i <thermal_zone_get_num_trips (chip->tz_dev); i++) { - - ret =thermal_zone_get_trip (chip->tz_dev, i, &trip); -if (ret) -continue ; - -if (trip.type ==THERMAL_TRIP_CRITICAL ) -return trip.temperature; - } - -return THERMAL_TEMP_INVALID ; -} -/* * This function initializes the internal temp value based on only the * current thermal stage and threshold. Setup threshold control and @@ -343,7 +325,9 @@ static int qpnp_tm_init(struct qpnp_tm_cmutex_unlock (&chip->lock); - crit_temp =qpnp_tm_get_critical_trip_temp (chip); + ret =thermal_zone_get_crit_temp (chip->tz_dev, &crit_temp); +if (ret) + crit_temp =THERMAL_TEMP_INVALID ;mutex_lock (&chip->lock);
PATCH RESEND 4/8 thermal: tegra: Introduce struct trip_temps for critical and hot trips
In reply to Rafael J. WysockiFrom: Rafael J. Wysocki <[email protected]>
Introduce a helper structure, struct trip_temps, for storing the temperatures of the critical and hot trip points.
This helps to make the code in tegra_tsensor_get_hw_channel_trips() somewhat cleaner and will be useful subsequently in eliminating iteration over trip indices from the driver.
No intentional functional impact.
---
This patch does not depend on the previous patch(es) in the series.
--- drivers/thermal/tegra/tegra30-tsensor.c | 34 ++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-)
drivers/thermal/tegra/tegra30-tsensor.c +20 -14
@@ -303,8 +303,13 @@ stop_channel:return 0 ; } +struct trip_temps { +int hot_trip; +int crit_trip; +}; +static void tegra_tsensor_get_hw_channel_trips (struct thermal_zone_device *tzd, -int *hot_trip,int *crit_trip) +struct trip_temps *temps) {unsigned int i;
@@ -312,8 +317,8 @@ static void tegra_tsensor_get_hw_channel* 90C is the maximal critical temperature of all Tegra30 SoC variants, * use it for the default trip if unspecified in a device-tree. */ - *hot_trip =85000 ; - *crit_trip =90000 ; + temps->hot_trip =85000 ; + temps->crit_trip =90000 ;for (i =0 ; i <thermal_zone_get_num_trips (tzd); i++) {
@@ -322,14 +327,14 @@ static void tegra_tsensor_get_hw_channelthermal_zone_get_trip (tzd, i, &trip);if (trip.type ==THERMAL_TRIP_HOT ) - *hot_trip = trip.temperature; + temps->hot_trip = trip.temperature;if (trip.type ==THERMAL_TRIP_CRITICAL ) - *crit_trip = trip.temperature; + temps->crit_trip = trip.temperature; }/* clamp hardware trips to the calibration limits */ - *hot_trip =clamp (*hot_trip,25000 ,90000 ); + temps->hot_trip =clamp (temps->hot_trip,25000 ,90000 );/* * Kernel will perform a normal system shut down if it will
@@ -338,7 +343,7 @@ static void tegra_tsensor_get_hw_channel* shut down gracefully before sending signal to the Power * Management controller. */ - *crit_trip =clamp (*crit_trip +5000 ,25000 ,90000 ); + temps->crit_trip =clamp (temps->crit_trip +5000 ,25000 ,90000 ); } static int tegra_tsensor_enable_hw_channel(const struct tegra_tsensor *ts,
@@ -346,7 +351,8 @@ static int tegra_tsensor_enable_hw_chann {const struct tegra_tsensor_channel *tsc = &ts->ch[id];struct thermal_zone_device *tzd = tsc->tzd; -int err, hot_trip =0 , crit_trip =0 ; +struct trip_temps temps = {0 }; +int err;u32 val;if (!tzd) {
@@ -357,24 +363,24 @@ static int tegra_tsensor_enable_hw_channreturn 0 ; } -tegra_tsensor_get_hw_channel_trips (tzd, &hot_trip, &crit_trip); +tegra_tsensor_get_hw_channel_trips (tzd, &temps);dev_info_once (ts->dev,"ch%u: PMC emergency shutdown trip set to %dC\n" , - id,DIV_ROUND_CLOSEST (crit_trip,1000 )); + id,DIV_ROUND_CLOSEST (temps.crit_trip,1000 )); - hot_trip =tegra_tsensor_temp_to_counter (ts, hot_trip); - crit_trip =tegra_tsensor_temp_to_counter (ts, crit_trip); + temps.hot_trip =tegra_tsensor_temp_to_counter (ts, temps.hot_trip); + temps.crit_trip =tegra_tsensor_temp_to_counter (ts, temps.crit_trip);/* program LEVEL2 counter threshold */ val =readl_relaxed (tsc->regs +TSENSOR_SENSOR0_CONFIG1 ); val &= ~TSENSOR_SENSOR0_CONFIG1_TH2 ; - val |=FIELD_PREP (TSENSOR_SENSOR0_CONFIG1_TH2 , hot_trip); + val |=FIELD_PREP (TSENSOR_SENSOR0_CONFIG1_TH2 , temps.hot_trip);writel_relaxed (val, tsc->regs +TSENSOR_SENSOR0_CONFIG1 );/* program LEVEL3 counter threshold */ val =readl_relaxed (tsc->regs +TSENSOR_SENSOR0_CONFIG2 ); val &= ~TSENSOR_SENSOR0_CONFIG2_TH3 ; - val |=FIELD_PREP (TSENSOR_SENSOR0_CONFIG2_TH3 , crit_trip); + val |=FIELD_PREP (TSENSOR_SENSOR0_CONFIG2_TH3 , temps.crit_trip);writel_relaxed (val, tsc->regs +TSENSOR_SENSOR0_CONFIG2 );/*
Re: [RESEND][PATCH v1 4/8] thermal: tegra: Introduce struct trip_temps for critical and hot trips
Quoted 111 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
Introduce a helper structure, struct
trip_temps, for storing the temperatures of the critical and hot trip points.This helps to make the code in
tegra_tsensor_get_hw_channel_trips()somewhat cleaner and will be useful subsequently in eliminating iteration over trip indices from the driver.No intentional functional impact.
Signed-off-by Rafael J. Wysocki <[email protected]>---
This patch does not depend on the previous patch(es) in the series.
--- drivers/thermal/tegra/tegra30-tsensor.c | 34 ++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-)Index:
linux-pm/drivers/thermal/tegra/tegra30-tsensor.c
===================================================================drivers/thermal/tegra/tegra30-tsensor.c +19
-13@@ -303,8 +303,13 @@ stop_channel:return 0 ; } +struct trip_temps { +int hot_trip; +int crit_trip; +}; +static void tegra_tsensor_get_hw_channel_trips (struct thermal_zone_device *tzd, -int *hot_trip,int *crit_trip) +struct trip_temps *temps) {unsigned int i;@@ -312,8 +317,8 @@ static void tegra_tsensor_get_hw_channel* 90C is the maximal critical temperature of all Tegra30 SoC variants, * use it for the default trip if unspecified in a device-tree. */ - *hot_trip =85000 ; - *crit_trip =90000 ; + temps->hot_trip =85000 ; + temps->crit_trip =90000 ;for (i =0 ; i <thermal_zone_get_num_trips (tzd); i++) {@@ -322,14 +327,14 @@ static void tegra_tsensor_get_hw_channelthermal_zone_get_trip (tzd, i, &trip);if (trip.type ==THERMAL_TRIP_HOT ) - *hot_trip = trip.temperature; + temps->hot_trip = trip.temperature;if (trip.type ==THERMAL_TRIP_CRITICAL ) - *crit_trip = trip.temperature; + temps->crit_trip = trip.temperature; }/* clamp hardware trips to the calibration limits */ - *hot_trip =clamp (*hot_trip,25000 ,90000 ); + temps->hot_trip =clamp (temps->hot_trip,25000 ,90000 );/* * Kernel will perform a normal system shut down if it will @@ -338,7 +343,7 @@ static void tegra_tsensor_get_hw_channel* shut down gracefully before sending signal to the Power * Management controller. */ - *crit_trip =clamp (*crit_trip +5000 ,25000 ,90000 ); + temps->crit_trip =clamp (temps->crit_trip +5000 ,25000 ,90000 ); } static int tegra_tsensor_enable_hw_channel(const struct tegra_tsensor *ts,@@ -346,7 +351,8 @@ static int tegra_tsensor_enable_hw_chann {const struct tegra_tsensor_channel *tsc = &ts->ch[id];struct thermal_zone_device *tzd = tsc->tzd; -int err, hot_trip =0 , crit_trip =0 ; +struct trip_temps temps = {0 }; +int err;u32 val;if (!tzd) {@@ -357,24 +363,24 @@ static int tegra_tsensor_enable_hw_channreturn 0 ; } -tegra_tsensor_get_hw_channel_trips (tzd, &hot_trip, &crit_trip); +tegra_tsensor_get_hw_channel_trips (tzd, &temps);dev_info_once (ts->dev,"ch%u: PMC emergency shutdown trip set to %dC\n" , - id,DIV_ROUND_CLOSEST (crit_trip,1000 )); + id,DIV_ROUND_CLOSEST (temps.crit_trip,1000 )); - hot_trip =tegra_tsensor_temp_to_counter (ts, hot_trip); - crit_trip =tegra_tsensor_temp_to_counter (ts, crit_trip); + temps.hot_trip =tegra_tsensor_temp_to_counter (ts, temps.hot_trip); + temps.crit_trip =tegra_tsensor_temp_to_counter (ts, temps.crit_trip);/* program LEVEL2 counter threshold */ val =readl_relaxed (tsc->regs +TSENSOR_SENSOR0_CONFIG1 ); val &= ~TSENSOR_SENSOR0_CONFIG1_TH2 ; - val |=FIELD_PREP (TSENSOR_SENSOR0_CONFIG1_TH2 , hot_trip); + val |=FIELD_PREP (TSENSOR_SENSOR0_CONFIG1_TH2 , temps.hot_trip);
drivers/thermal/tegra/tegra30-tsensor.c static int tegra_tsensor_enable_hw_chann · line 386
Quoted 10 lines
drivers/thermal/tegra/tegra30-tsensor.c +1
-1writel_relaxed (val, tsc->regs +TSENSOR_SENSOR0_CONFIG1 );/* program LEVEL3 counter threshold */ val =readl_relaxed (tsc->regs +TSENSOR_SENSOR0_CONFIG2 ); val &= ~TSENSOR_SENSOR0_CONFIG2_TH3 ; - val |=FIELD_PREP (TSENSOR_SENSOR0_CONFIG2_TH3 , crit_trip); + val |=FIELD_PREP (TSENSOR_SENSOR0_CONFIG2_TH3 , temps.crit_trip);writel_relaxed (val, tsc->regs +TSENSOR_SENSOR0_CONFIG2 );/*
PATCH RESEND 5/8 thermal: tegra: Use thermal_zone_for_each_trip() for walking trip points
In reply to Rafael J. WysockiFrom: Rafael J. Wysocki <[email protected]>
It is generally inefficient to iterate over trip indices and call thermal_zone_get_trip() every time to get the struct thermal_trip corresponding to the given trip index, so modify the Tegra thermal drivers to use thermal_zone_for_each_trip() for walking trips.
---
This patch does not depend on patches [1-3/8].
--- drivers/thermal/tegra/soctherm.c | 38 ++++++++++++++++---------------- drivers/thermal/tegra/tegra30-tsensor.c | 25 ++++++++++----------- 2 files changed, 33 insertions(+), 30 deletions(-)
drivers/thermal/tegra/soctherm.c +20 -18
@@ -682,24 +682,25 @@ static const struct thermal_zone_device_ .set_trips = tegra_thermctl_set_trips, }; -static int get_hot_temp (struct thermal_zone_device *tz,int *trip_id,int *temp) +static int get_hot_trip_cb (struct thermal_trip *trip,void *arg) { -int i, ret; -struct thermal_trip trip; +const struct thermal_trip **trip_ret = arg; -for (i =0 ; i <thermal_zone_get_num_trips (tz); i++) { +if (trip->type !=THERMAL_TRIP_HOT ) +return 0 ; - ret =thermal_zone_get_trip (tz, i, &trip); -if (ret) -return -EINVAL ; - -if (trip.type ==THERMAL_TRIP_HOT ) { - *trip_id = i; -return 0 ; - } - } + *trip_ret = trip; +/* Return nonzero to terminate the search. */ +return 1 ; +} -return -EINVAL ; +static const struct thermal_trip *get_hot_trip (struct thermal_zone_device *tz) +{ +const struct thermal_trip *trip =NULL ; + +thermal_zone_for_each_trip (tz, get_hot_trip_cb, &trip); + +return trip; }/**
@@ -731,8 +732,9 @@ static int tegra_soctherm_set_hwtrips(st struct thermal_zone_device *tz) {struct tegra_soctherm *ts =dev_get_drvdata (dev); +const struct thermal_trip *hot_trip;struct soctherm_throt_cfg *stc; -int i, trip, temperature, ret; +int i, temperature, ret;/* Get thermtrips. If missing, try to get critical trips. */ temperature =tsensor_group_thermtrip_get (ts, sg->id);
@@ -749,8 +751,8 @@ static int tegra_soctherm_set_hwtrips(stdev_info (dev,"thermtrip: will shut down when %s reaches %d mC\n" , sg->name, temperature); - ret =get_hot_temp (tz, &trip, &temperature); -if (ret) { + hot_trip =get_hot_trip (tz); +if (!hot_trip) {dev_info (dev,"throttrip: %s: missing hot temperature\n" , sg->name);return 0 ;
@@ -763,7 +765,7 @@ static int tegra_soctherm_set_hwtrips(stcontinue ; cdev = ts->throt_cfgs[i].cdev; -if (get_thermal_instance (tz, cdev, trip)) +if (thermal_trip_is_bound_to_cdev (tz, hot_trip, cdev)) stc =find_throttle_cfg_by_name (ts, cdev->type);else continue ;
drivers/thermal/tegra/tegra30-tsensor.c +13 -12
@@ -308,6 +308,18 @@ struct trip_temps {int crit_trip; }; +static int tegra_tsensor_get_trips_cb (struct thermal_trip *trip,void *arg) +{ +struct trip_temps *temps = arg; + +if (trip->type ==THERMAL_TRIP_HOT ) + temps->hot_trip = trip->temperature; +else if (trip->type ==THERMAL_TRIP_CRITICAL ) + temps->crit_trip = trip->temperature; + +return 0 ; +} +static void tegra_tsensor_get_hw_channel_trips (struct thermal_zone_device *tzd,struct trip_temps *temps) {
@@ -320,18 +332,7 @@ static void tegra_tsensor_get_hw_channel temps->hot_trip =85000 ; temps->crit_trip =90000 ; -for (i =0 ; i <thermal_zone_get_num_trips (tzd); i++) { - -struct thermal_trip trip; - -thermal_zone_get_trip (tzd, i, &trip); - -if (trip.type ==THERMAL_TRIP_HOT ) - temps->hot_trip = trip.temperature; - -if (trip.type ==THERMAL_TRIP_CRITICAL ) - temps->crit_trip = trip.temperature; - } +thermal_zone_for_each_trip (tzd, tegra_tsensor_get_trips_cb, temps);/* clamp hardware trips to the calibration limits */ temps->hot_trip =clamp (temps->hot_trip,25000 ,90000 );
Re: [RESEND][PATCH v1 5/8] thermal: tegra: Use thermal_zone_for_each_trip() for walking trip points
Quoted 128 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
It is generally inefficient to iterate over trip indices and call
thermal_zone_get_trip()every time to get the structthermal_tripcorresponding to the given trip index, so modify the Tegra thermal drivers to usethermal_zone_for_each_trip()for walking trips.Signed-off-by Rafael J. Wysocki <[email protected]>---
This patch does not depend on patches [1-3/8].
--- drivers/thermal/tegra/soctherm.c | 38 ++++++++++++++++---------------- drivers/thermal/tegra/tegra30-tsensor.c | 25 ++++++++++----------- 2 files changed, 33 insertions(+), 30 deletions(-)Index:
linux-pm/drivers/thermal/tegra/soctherm.c
===================================================================drivers/thermal/tegra/soctherm.c +20
-18@@ -682,24 +682,25 @@ static const struct thermal_zone_device_ .set_trips = tegra_thermctl_set_trips, }; -static int get_hot_temp (struct thermal_zone_device *tz,int *trip_id,int *temp) +static int get_hot_trip_cb (struct thermal_trip *trip,void *arg) { -int i, ret; -struct thermal_trip trip; +const struct thermal_trip **trip_ret = arg; -for (i =0 ; i <thermal_zone_get_num_trips (tz); i++) { +if (trip->type !=THERMAL_TRIP_HOT ) +return 0 ; - ret =thermal_zone_get_trip (tz, i, &trip); -if (ret) -return -EINVAL ; - -if (trip.type ==THERMAL_TRIP_HOT ) { - *trip_id = i; -return 0 ; - } - } + *trip_ret = trip; +/* Return nonzero to terminate the search. */ +return 1 ; +} -return -EINVAL ; +static const struct thermal_trip *get_hot_trip (struct thermal_zone_device *tz) +{ +const struct thermal_trip *trip =NULL ; + +thermal_zone_for_each_trip (tz, get_hot_trip_cb, &trip); + +return trip; }/** @@ -731,8 +732,9 @@ static int tegra_soctherm_set_hwtrips(st struct thermal_zone_device *tz) {struct tegra_soctherm *ts =dev_get_drvdata (dev); +const struct thermal_trip *hot_trip;struct soctherm_throt_cfg *stc; -int i, trip, temperature, ret; +int i, temperature, ret;/* Get thermtrips. If missing, try to get critical trips. */ temperature =tsensor_group_thermtrip_get (ts, sg->id);@@ -749,8 +751,8 @@ static int tegra_soctherm_set_hwtrips(stdev_info (dev,"thermtrip: will shut down when %s reaches %d mC\n" , sg->name, temperature); - ret =get_hot_temp (tz, &trip, &temperature); -if (ret) { + hot_trip =get_hot_trip (tz); +if (!hot_trip) {dev_info (dev,"throttrip: %s: missing hot temperature\n" , sg->name);return 0 ;@@ -763,7 +765,7 @@ static int tegra_soctherm_set_hwtrips(stcontinue ; cdev = ts->throt_cfgs[i].cdev; -if (get_thermal_instance (tz, cdev, trip)) +if (thermal_trip_is_bound_to_cdev (tz, hot_trip, cdev)) stc =find_throttle_cfg_by_name (ts, cdev->type);else continue ;Index:
linux-pm/drivers/thermal/tegra/tegra30-tsensor.c
===================================================================drivers/thermal/tegra/tegra30-tsensor.c +12
-6@@ -308,6 +308,18 @@ struct trip_temps {int crit_trip; }; +static int tegra_tsensor_get_trips_cb (struct thermal_trip *trip,void *arg) +{ +struct trip_temps *temps = arg; + +if (trip->type ==THERMAL_TRIP_HOT ) + temps->hot_trip = trip->temperature; +else if (trip->type ==THERMAL_TRIP_CRITICAL ) + temps->crit_trip = trip->temperature; + +return 0 ; +} +static void tegra_tsensor_get_hw_channel_trips (struct thermal_zone_device *tzd,struct trip_temps *temps) {@@ -320,18 +332,7 @@ static void tegra_tsensor_get_hw_channel temps->hot_trip =85000 ; temps->crit_trip =90000 ; -for (i =0 ; i <thermal_zone_get_num_trips (tzd); i++) { - -struct thermal_trip trip; - -thermal_zone_get_trip (tzd, i, &trip); -
drivers/thermal/tegra/tegra30-tsensor.c static void tegra_tsensor_get_hw_channel · line 338
Quoted 10 lines
drivers/thermal/tegra/tegra30-tsensor.c +1
-6-if (trip.type ==THERMAL_TRIP_HOT ) - temps->hot_trip = trip.temperature; - -if (trip.type ==THERMAL_TRIP_CRITICAL ) - temps->crit_trip = trip.temperature; - } +thermal_zone_for_each_trip (tzd, tegra_tsensor_get_trips_cb, temps);/* clamp hardware trips to the calibration limits */ temps->hot_trip =clamp (temps->hot_trip,25000 ,90000 );
PATCH RESEND 6/8 thermal: helpers: Drop get_thermal_instance()
In reply to Rafael J. WysockiFrom: Rafael J. Wysocki <[email protected]>
There are no more users of get_thermal_instance(), so drop it.
While at it, replace get_instance() returning a pointer to struct thermal_instance with thermal_instance_present() returning a bool which is more straightforward.
No functional impact.
--- drivers/thermal/thermal_core.h | 5 ----- drivers/thermal/thermal_helpers.c | 30 ++++++------------------------ 2 files changed, 6 insertions(+), 29 deletions(-)
drivers/thermal/thermal_core.h +0 -5
@@ -204,11 +204,6 @@ void __thermal_cdev_update(struct thermaint get_tz_trend (struct thermal_zone_device *tz,const struct thermal_trip *trip); -struct thermal_instance * -get_thermal_instance (struct thermal_zone_device *tz, -struct thermal_cooling_device *cdev, -int trip); -/* * This structure is used to describe the behavior of * a certain cooling device on a certain trip point
drivers/thermal/thermal_helpers.c +6 -24
@@ -39,18 +39,18 @@ int get_tz_trend(struct thermal_zone_devreturn trend; } -static struct thermal_instance *get_instance (struct thermal_zone_device *tz, -struct thermal_cooling_device *cdev, -const struct thermal_trip *trip) +static bool thermal_instance_present (struct thermal_zone_device *tz, +struct thermal_cooling_device *cdev, +const struct thermal_trip *trip) {struct thermal_instance *ti;list_for_each_entry (ti, &tz->thermal_instances, tz_node) {if (ti->trip == trip && ti->cdev == cdev) -return ti; +return true; } -return NULL ; +return false; } bool thermal_trip_is_bound_to_cdev(struct thermal_zone_device *tz,
@@ -62,7 +62,7 @@ bool thermal_trip_is_bound_to_cdev(strucmutex_lock (&tz->lock);mutex_lock (&cdev->lock); - ret = !!get_instance (tz, cdev, trip); + ret =thermal_instance_present (tz, cdev, trip);mutex_unlock (&cdev->lock);mutex_unlock (&tz->lock);
@@ -71,24 +71,6 @@ bool thermal_trip_is_bound_to_cdev(struc }EXPORT_SYMBOL_GPL (thermal_trip_is_bound_to_cdev); -struct thermal_instance * -get_thermal_instance (struct thermal_zone_device *tz, -struct thermal_cooling_device *cdev,int trip_index) -{ -struct thermal_instance *ti; - -mutex_lock (&tz->lock); -mutex_lock (&cdev->lock); - - ti =get_instance (tz, cdev, &tz->trips[trip_index].trip); - -mutex_unlock (&cdev->lock); -mutex_unlock (&tz->lock); - -return ti; -} -EXPORT_SYMBOL (get_thermal_instance); -/** * __thermal_zone_get_temp() - returns the temperature of a thermal zone * @tz: a valid pointer to a struct thermal_zone_device
Re: [RESEND][PATCH v1 6/8] thermal: helpers: Drop get_thermal_instance()
Quoted 87 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
There are no more users of
get_thermal_instance(), so drop it.While at it, replace
get_instance()returning a pointer to structthermal_instancewiththermal_instance_present()returning a bool which is more straightforward.No functional impact.
Signed-off-by Rafael J. Wysocki <[email protected]>--- drivers/thermal/thermal_core.h | 5 ----- drivers/thermal/thermal_helpers.c | 30 ++++++------------------------ 2 files changed, 6 insertions(+), 29 deletions(-)Index:
linux-pm/drivers/thermal/thermal_core.h
===================================================================drivers/thermal/thermal_core.h +0
-5@@ -204,11 +204,6 @@ void __thermal_cdev_update(struct thermaint get_tz_trend (struct thermal_zone_device *tz,const struct thermal_trip *trip); -struct thermal_instance * -get_thermal_instance (struct thermal_zone_device *tz, -struct thermal_cooling_device *cdev, -int trip); -/* * This structure is used to describe the behavior of * a certain cooling device on a certain trip point Index:
linux-pm/drivers/thermal/thermal_helpers.c
===================================================================drivers/thermal/thermal_helpers.c +6
-17@@ -39,18 +39,18 @@ int get_tz_trend(struct thermal_zone_devreturn trend; } -static struct thermal_instance *get_instance (struct thermal_zone_device *tz, -struct thermal_cooling_device *cdev, -const struct thermal_trip *trip) +static bool thermal_instance_present (struct thermal_zone_device *tz, +struct thermal_cooling_device *cdev, +const struct thermal_trip *trip) {struct thermal_instance *ti;list_for_each_entry (ti, &tz->thermal_instances, tz_node) {if (ti->trip == trip && ti->cdev == cdev) -return ti; +return true; } -return NULL ; +return false; } bool thermal_trip_is_bound_to_cdev(struct thermal_zone_device *tz,@@ -62,7 +62,7 @@ bool thermal_trip_is_bound_to_cdev(strucmutex_lock (&tz->lock);mutex_lock (&cdev->lock); - ret = !!get_instance (tz, cdev, trip); + ret =thermal_instance_present (tz, cdev, trip);mutex_unlock (&cdev->lock);mutex_unlock (&tz->lock);@@ -71,24 +71,6 @@ bool thermal_trip_is_bound_to_cdev(struc }EXPORT_SYMBOL_GPL (thermal_trip_is_bound_to_cdev); -struct thermal_instance * -get_thermal_instance (struct thermal_zone_device *tz, -struct thermal_cooling_device *cdev,int trip_index) -{ -struct thermal_instance *ti; - -mutex_lock (&tz->lock); -mutex_lock (&cdev->lock); - - ti =get_instance (tz, cdev, &tz->trips[trip_index].trip); -
drivers/thermal/thermal_helpers.c bool thermal_trip_is_bound_to_cdev(struc · line 76
Quoted 10 lines
drivers/thermal/thermal_helpers.c +0
-7-mutex_unlock (&cdev->lock); -mutex_unlock (&tz->lock); - -return ti; -} -EXPORT_SYMBOL (get_thermal_instance); -/** * __thermal_zone_get_temp() - returns the temperature of a thermal zone * @tz: a valid pointer to a struct thermal_zone_device
LGTM, small nit: you can also remove the description of that get_thermal_instance() from Documentation/driver-api/thermal/sysfs-api.rst
It sneaked in somehow...
PATCH RESEND 8/8 thermal: trip: Drop thermal_zone_get_trip()
In reply to Rafael J. WysockiFrom: Rafael J. Wysocki <[email protected]>
There are no more callers of thermal_zone_get_trip() in the tree, so drop it.
No functional impact.
--- drivers/thermal/thermal_trip.c | 14 -------------- include/linux/thermal.h | 2 -- 2 files changed, 16 deletions(-)
drivers/thermal/thermal_trip.c +0 -14
@@ -108,20 +108,6 @@ void thermal_zone_set_trips(struct thermdev_err (&tz->device,"Failed to set trips: %d\n" , ret); } -int thermal_zone_get_trip (struct thermal_zone_device *tz,int trip_id, -struct thermal_trip *trip) -{ -if (!tz || !trip || trip_id <0 || trip_id >= tz->num_trips) -return -EINVAL ; - -mutex_lock (&tz->lock); - *trip = tz->trips[trip_id].trip; -mutex_unlock (&tz->lock); - -return 0 ; -} -EXPORT_SYMBOL_GPL (thermal_zone_get_trip); -int thermal_zone_trip_id (const struct thermal_zone_device *tz,const struct thermal_trip *trip) {
include/linux/thermal.h +0 -2
@@ -202,8 +202,6 @@ static inline void devm_thermal_of_zone_ }#endif -int thermal_zone_get_trip (struct thermal_zone_device *tz,int trip_id, -struct thermal_trip *trip);int for_each_thermal_trip (struct thermal_zone_device *tz,int (*cb)(struct thermal_trip *,void *),void *data);
Re: [RESEND][PATCH v1 8/8] thermal: trip: Drop thermal_zone_get_trip()
Quoted 46 lines · Rafael J. Wysocki
From: Rafael J. Wysocki <[email protected]>
There are no more callers of
thermal_zone_get_trip()in the tree, so drop it.No functional impact.
Signed-off-by Rafael J. Wysocki <[email protected]>--- drivers/thermal/thermal_trip.c | 14 -------------- include/linux/thermal.h | 2 -- 2 files changed, 16 deletions(-)Index:
linux-pm/drivers/thermal/thermal_trip.c
===================================================================drivers/thermal/thermal_trip.c +0
-14@@ -108,20 +108,6 @@ void thermal_zone_set_trips(struct thermdev_err (&tz->device,"Failed to set trips: %d\n" , ret); } -int thermal_zone_get_trip (struct thermal_zone_device *tz,int trip_id, -struct thermal_trip *trip) -{ -if (!tz || !trip || trip_id <0 || trip_id >= tz->num_trips) -return -EINVAL ; - -mutex_lock (&tz->lock); - *trip = tz->trips[trip_id].trip; -mutex_unlock (&tz->lock); - -return 0 ; -} -EXPORT_SYMBOL_GPL (thermal_zone_get_trip); -int thermal_zone_trip_id (const struct thermal_zone_device *tz,const struct thermal_trip *trip) {Index:
linux-pm/include/linux/thermal.h
===================================================================
include/linux/thermal.h static inline void devm_thermal_of_zone_ · line 207
Quoted 8 lines
include/linux/thermal.h +0
-2@@ -202,8 +202,6 @@ static inline void devm_thermal_of_zone_ }#endif -int thermal_zone_get_trip (struct thermal_zone_device *tz,int trip_id, -struct thermal_trip *trip);int for_each_thermal_trip (struct thermal_zone_device *tz,int (*cb)(struct thermal_trip *,void *),void *data);