ath10k-firmware: QCA9888 hw1.0: Add Linksys MR8300 V1.0 specific BDFs
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH v2 1/1 ath10k-firmware: QCA9888 hw1.0: Add Linksys MR8300 V1.0 specific BDFs
Hi,
The support for this device is currently being added into OpenWrt. This AP requires two special BDFs to get the Wi-Fi PHYs working (correctly).
* description for what hardware this is:
- it is a QCA9888 based radio used for 5Ghz
* origin of the board file
- boarddata files were taken from OEM Linksys FW_MR8300_1.1.7.201281_prod.img
* ids to be used with the board file
- QCA9888 hw1.0
+ bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-mr8300-v0-fcc MD5: 1f263c52e7862bccab6fd6551092077c
* attach the actual board file
- The name of the files are equal to the id string in the board-2.bin (minus the ".bin")
Kind regards,
Hans
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 18 lines · Hans Geiblinger
The support for this device is currently being added into OpenWrt. This AP requires two special BDFs to get the Wi-Fi PHYs working (correctly).
* description for what hardware this is:
- it is a QCA9888 based radio used for 5Ghz* origin of the board file
- boarddata files were taken from OEM Linksys FW_MR8300_1.1.7.201281_prod.img* ids to be used with the board file
- QCA9888 hw1.0
+ bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-mr8300-v0-fcc MD5: 1f263c52e7862bccab6fd6551092077c
Quoted 3 lines
* attach the actual board file
- The name of the files are equal to the id string in the board-2.bin (minus the ".bin")
Thanks, added to QCA9984/hw1.0/board-2.bin:
New:
bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-mr8300-v0-fcc
Changed:
Deleted:
1 board image(s) added, 0 changed, 0 deleted, 19 in total
https://github.com/kvalo/ath10k-firmware/commit/c0b61963e3ed79cb3d95d915dbdde1fd21ef3cf9
Signature · 8 lines
https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Hi,
Quoted 20 lines · Kalle Valo
Quoted 18 lines · Hans Geiblinger
The support for this device is currently being added into OpenWrt. This AP requires two special BDFs to get the Wi-Fi PHYs working (correctly).
* description for what hardware this is:
- it is a QCA9888 based radio used for 5Ghz* origin of the board file
- boarddata files were taken from OEM Linksys FW_MR8300_1.1.7.201281_prod.img* ids to be used with the board file
- QCA9888 hw1.0
+ bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-mr8300-v0-fcc MD5: 1f263c52e7862bccab6fd6551092077c
Quoted 5 lines
Quoted 3 lines
* attach the actual board file
- The name of the files are equal to the id string in the
board-2.bin (minus the ".bin")Thanks, added to QCA9984/hw1.0/board-2.bin:
Oh... I just noticed. I think this got misplaced into QCA9984's board-2.bin. But this was for the QCA9888(v2). :(
Well, at least there shouldn't be any conflicts. Should I resend the Linksys MR8300's board files and add that as a note for your next round?
(BTW: hope linux-firmware.git syncs them up anyway.)
Cheers,
Christian
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 23 lines · Christian Lamparter
Hi,
Quoted 20 lines · Kalle Valo
Quoted 18 lines · Hans Geiblinger
The support for this device is currently being added into OpenWrt. This AP requires two special BDFs to get the Wi-Fi PHYs working (correctly).
* description for what hardware this is:
- it is a QCA9888 based radio used for 5Ghz* origin of the board file
- boarddata files were taken from OEM Linksys FW_MR8300_1.1.7.201281_prod.img* ids to be used with the board file
- QCA9888 hw1.0
+ bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-mr8300-v0-fcc MD5: 1f263c52e7862bccab6fd6551092077c
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
* attach the actual board file
- The name of the files are equal to the id string in the
board-2.bin (minus the ".bin")Thanks, added to QCA9984/hw1.0/board-2.bin:
Oh... I just noticed. I think this got misplaced into QCA9984's board-2.bin. But this was for the QCA9888(v2). :(
Oh, sorry about that. Very good that you noticed it! I still manually choose the directory so mistakes can happen.
BTW, the subject should have hw2.0 instead of hw1.0.
Quoted 3 lines
Well, at least there shouldn't be any conflicts. Should I resend the Linksys MR8300's board files and add that as a note for your next round?
No need to resend, I fixed it manually now. Please double check:
https://github.com/kvalo/ath10k-firmware/commit/b80f1c521e3c406f3018aa2b2b348b495b51f0f3
Signature · 8 lines
https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k