xenbus/backend: Add memory pressure handler callback
Subsystems (3)
v13 cover xenbus/backend: Add memory pressure handler callback
Granting pages consumes backend system memory. In systems configured with insufficient spare memory for those pages, it can cause a memory pressure situation. However, finding the optimal amount of the spare memory is challenging for large systems having dynamic resource utilization patterns. Also, such a static configuration might lack flexibility.
To mitigate such problems, this patchset adds a memory reclaim callback to 'xenbus_driver' (patch 1) and then introduce a lock for race condition avoidance (patch 2). After that, patch 3 applies the callback mechanism to mitigate the problem in 'xen-blkback'. The fourth and fifth patches are trivial cleanups; those fix nits we found during the development of this patchset.
Note that patches 1, 4, and 5 are not changed since v9.
Base Version
------------
This patch is based on v5.4. A complete tree is also available at my public git repo:
https://github.com/sjp38/linux/tree/patches/blkback/buffer_squeeze/v13
Patch History
-------------
Changes from v12
(https://lore.kernel.org/xen-devel/[email protected]/)
- Do not unnecessarily disable interrupts (suggested by Juergen)
- Hold lock from xenbus side (suggested by Juergen)
Changes from v11
(https://lore.kernel.org/xen-devel/[email protected]/)
- Fix wrong trylock use (reported by Juergen)
- Merge patch 3 and 4 (suggested by Juergen)
- Update test result
Changes from v10
(https://lore.kernel.org/xen-devel/[email protected]/)
- Fix race condition (reported by SeongJae, suggested by Juergen)
Changes from v9
(https://lore.kernel.org/xen-devel/[email protected]/)
- Add 'Reviewed-by' and 'Acked-by' from Roger Pau Monné
- Update the commit message for overhead test of the 2nd path
Changes from v8
(https://lore.kernel.org/xen-devel/[email protected]/)
- Drop 'Reviewed-by: Juergen' from the second patch (suggested by Roger Pau Monné)
- Update contact of the new module param to SeongJae Park <[email protected]>
(suggested by Roger Pau Monné)
- Wordsmith the description of the parameter
(suggested by Roger Pau Monné)
- Fix dumb bugs
(suggested by Roger Pau Monné)
- Move module param definition to xenbus.c and reduce the number of lines for this change
(suggested by Roger Pau Monné)
- Add a comment for the new callback, reclaim_memory, as other callbacks also have
- Add another trivial cleanup of xenbus.c file (4th patch)
Changes from v7
(https://lore.kernel.org/xen-devel/[email protected]/)
- Update sysfs-driver-xen-blkback for new parameter (suggested by Roger Pau Monné)
- Use per-xen_blkif buffer_squeeze_end instead of global variable (suggested by Roger Pau Monné)
Changes from v6
(https://lore.kernel.org/linux-block/[email protected]/)
- Remove more unnecessary prefixes (suggested by Roger Pau Monné)
- Constify a variable (suggested by Roger Pau Monné)
- Rename 'reclaim' into 'reclaim_memory' (suggested by Roger Pau Monné)
- More wordsmith of the commit message (suggested by Roger Pau Monné)
Changes from v5
(https://lore.kernel.org/linux-block/[email protected]/)
- Wordsmith the commit messages (suggested by Roger Pau Monné)
- Change the reclaim callback return type (suggested by Roger Pau Monné)
- Change the type of the blkback squeeze duration variable (suggested by Roger Pau Monné)
- Add a patch for removal of unnecessary static variable name prefixes (suggested by Roger Pau Monné)
- Fix checkpatch.pl warnings
Changes from v4
(https://lore.kernel.org/xen-devel/[email protected]/)
- Remove domain id parameter from the callback (suggested by Juergen Gross)
- Rename xen-blkback module parameter (suggested by Stefan Nuernburger)
Changes from v3
(https://lore.kernel.org/xen-devel/[email protected]/)
- Add general callback in xen_driver and use it (suggested by Juergen Gross)
Changes from v2
(https://lore.kernel.org/linux-block/[email protected])
- Rename the module parameter and variables for brevity (aggressive shrinking -> squeezing)
Changes from v1
(https://lore.kernel.org/xen-devel/[email protected]/)
- Adjust the description to not use the term, arbitrarily (suggested by Paul Durrant)
- Specify time unit of the duration in the parameter description, (suggested by Maximilian Heyne)
- Change default aggressive shrinking duration from 1ms to 10ms
- Merge two patches into one single patch
SeongJae Park (5):
xenbus/backend: Add memory pressure handler callback xenbus/backend: Protect xenbus callback with lock xen/blkback: Squeeze page pools if a memory pressure is detected xen/blkback: Remove unnecessary static variable name prefixes xen/blkback: Consistently insert one empty line between functions
.../ABI/testing/sysfs-driver-xen-blkback | 10 +++++ drivers/block/xen-blkback/blkback.c | 42 +++++++++---------- drivers/block/xen-blkback/common.h | 1 + drivers/block/xen-blkback/xenbus.c | 28 ++++++++++--- drivers/xen/xenbus/xenbus_probe.c | 8 +++- drivers/xen/xenbus/xenbus_probe_backend.c | 38 +++++++++++++++++ include/xen/xenbus.h | 3 ++ 7 files changed, 103 insertions(+), 27 deletions(-)
Signature · 1 line
2.17.1
PATCH v13 1/5 xenbus/backend: Add memory pressure handler callback
From: SeongJae Park <[email protected]>
Granting pages consumes backend system memory. In systems configured with insufficient spare memory for those pages, it can cause a memory pressure situation. However, finding the optimal amount of the spare memory is challenging for large systems having dynamic resource utilization patterns. Also, such a static configuration might lack flexibility.
To mitigate such problems, this commit adds a memory reclaim callback to 'xenbus_driver'. If a memory pressure is detected, 'xenbus' requests every backend driver to volunarily release its memory.
Note that it would be able to improve the callback facility for more sophisticated handlings of general pressures. For example, it would be possible to monitor the memory consumption of each device and issue the release requests to only devices which causing the pressure. Also, the callback could be extended to handle not only memory, but general resources. Nevertheless, this version of the implementation defers such sophisticated goals as a future work.
--- drivers/xen/xenbus/xenbus_probe_backend.c | 32 +++++++++++++++++++++++ include/xen/xenbus.h | 1 + 2 files changed, 33 insertions(+)
drivers/xen/xenbus/xenbus_probe_backend.c +32 -0
@@ -248,6 +248,35 @@ static int backend_probe_and_watch(struct notifier_block *notifier,return NOTIFY_DONE ; } +static int backend_reclaim_memory (struct device *dev,void *data) +{ +const struct xenbus_driver *drv; + +if (!dev->driver) +return 0 ; + drv =to_xenbus_driver (dev->driver); +if (drv && drv->reclaim_memory) + drv->reclaim_memory (to_xenbus_device (dev)); +return 0 ; +} + +/* +* Returns 0 always because we are using shrinker to only detect memory +* pressure. +*/ +static unsigned long backend_shrink_memory_count (struct shrinker *shrinker, +struct shrink_control *sc) +{ +bus_for_each_dev (&xenbus_backend.bus,NULL ,NULL , + backend_reclaim_memory); +return 0 ; +} + +static struct shrinker backend_memory_shrinker = { + .count_objects = backend_shrink_memory_count, + .seeks =DEFAULT_SEEKS , +}; +static int __init xenbus_probe_backend_init (void ) {static struct notifier_block xenstore_notifier = {
@@ -264,6 +293,9 @@ static int __init xenbus_probe_backend_init(void)register_xenstore_notifier (&xenstore_notifier); +if (register_shrinker (&backend_memory_shrinker)) +pr_warn ("shrinker registration failed\n" ); +return 0 ; }subsys_initcall (xenbus_probe_backend_init);
include/xen/xenbus.h +1 -0
@@ -104,6 +104,7 @@ struct xenbus_driver {struct device_driver driver;int (*read_otherend_details)(struct xenbus_device *dev);int (*is_ready)(struct xenbus_device *dev); +void (*reclaim_memory)(struct xenbus_device *dev); };static inline struct xenbus_driver *to_xenbus_driver (struct device_driver *drv)
Signature · 1 line
2.17.1
PATCH v13 2/5 xenbus/backend: Protect xenbus callback with lock
In reply to SeongJae ParkFrom: SeongJae Park <[email protected]>
A driver's 'reclaim_memory' callback can race with 'probe' or 'remove' because it will be called whenever memory pressure is detected. To avoid such race, this commit embeds a spinlock in each 'xenbus_device' and make 'xenbus' to hold the lock while the corresponded callbacks are running.
--- drivers/xen/xenbus/xenbus_probe.c | 8 +++++++- drivers/xen/xenbus/xenbus_probe_backend.c | 10 ++++++++-- include/xen/xenbus.h | 1 + 3 files changed, 16 insertions(+), 3 deletions(-)
drivers/xen/xenbus/xenbus_probe.c +7 -1
@@ -232,7 +232,9 @@ int xenbus_dev_probe(struct device *_dev)return err; } +spin_lock (&dev->reclaim_lock); err = drv->probe (dev, id); +spin_unlock (&dev->reclaim_lock);if (err) goto fail;
@@ -260,8 +262,11 @@ int xenbus_dev_remove(struct device *_dev)free_otherend_watch (dev); -if (drv->remove) +if (drv->remove) { +spin_lock (&dev->reclaim_lock); drv->remove (dev); +spin_unlock (&dev->reclaim_lock); + }free_otherend_details (dev);
@@ -472,6 +477,7 @@ int xenbus_probe_node(struct xen_bus_type *bus, goto fail;dev_set_name (&xendev->dev,"%s" , devname); +spin_lock_init (&xendev->reclaim_lock);/* Register with generic device framework. */ err =device_register (&xendev->dev);
drivers/xen/xenbus/xenbus_probe_backend.c +8 -2
@@ -251,12 +251,18 @@ static int backend_probe_and_watch(struct notifier_block *notifier,static int backend_reclaim_memory (struct device *dev,void *data) {const struct xenbus_driver *drv; +struct xenbus_device *xdev;if (!dev->driver)return 0 ; drv =to_xenbus_driver (dev->driver); -if (drv && drv->reclaim_memory) - drv->reclaim_memory (to_xenbus_device (dev)); +if (drv && drv->reclaim_memory) { + xdev =to_xenbus_device (dev); +if (!spin_trylock (&xdev->reclaim_lock)) +return 0 ; + drv->reclaim_memory (xdev); +spin_unlock (&xdev->reclaim_lock); + }return 0 ; }
include/xen/xenbus.h +1 -0
@@ -76,6 +76,7 @@ struct xenbus_device {enum xenbus_state state;struct completion down;struct work_struct work; +spinlock_t reclaim_lock; };static inline struct xenbus_device *to_xenbus_device (struct device *dev)
Signature · 1 line
2.17.1
Re: [PATCH v13 2/5] xenbus/backend: Protect xenbus callback with lock
Quoted 9 lines · SeongJae Park
From: SeongJae Park <[email protected]>
A driver's '
reclaim_memory' callback can race with 'probe' or 'remove' because it will be called whenever memory pressure is detected. To avoid such race, this commit embeds a spinlock in each 'xenbus_device' and make 'xenbus' to hold the lock while the corresponded callbacks are running.Signed-off-by SeongJae Park <[email protected]>
Juergen
PATCH v13 3/5 xen/blkback: Squeeze page pools if a memory pressure is detected
In reply to SeongJae ParkFrom: SeongJae Park <[email protected]>
Each blkif has a free pages pool for the grant mapping. The size of the pool starts from zero and is increased on demand while processing the I/O requests. If current I/O requests handling is finished or 100 milliseconds has passed since last I/O requests handling, it checks and shrinks the pool to not exceed the size limit, max_buffer_pages.
Therefore, host administrators can cause memory pressure in blkback by attaching a large number of block devices and inducing I/O. Such problematic situations can be avoided by limiting the maximum number of devices that can be attached, but finding the optimal limit is not so easy. Improper set of the limit can results in memory pressure or a resource underutilization. This commit avoids such problematic situations by squeezing the pools (returns every free page in the pool to the system) for a while (users can set this duration via a module parameter) if memory pressure is detected.
Discussions
===========
The blkback's original shrinking mechanism returns only pages in the pool which are not currently be used by blkback to the system. In other words, the pages that are not mapped with granted pages. Because this commit is changing only the shrink limit but still uses the same freeing mechanism it does not touch pages which are currently mapping grants.
Once memory pressure is detected, this commit keeps the squeezing limit for a user-specified time duration. The duration should be neither too long nor too short. If it is too long, the squeezing incurring overhead can reduce the I/O performance. If it is too short, blkback will not free enough pages to reduce the memory pressure. This commit sets the value as 10 milliseconds by default because it is a short time in terms of I/O while it is a long time in terms of memory operations. Also, as the original shrinking mechanism works for at least every 100 milliseconds, this could be a somewhat reasonable choice. I also tested other durations (refer to the below section for more details) and confirmed that 10 milliseconds is the one that works best with the test. That said, the proper duration depends on actual configurations and workloads. That's why this commit allows users to set the duration as a module parameter.
Memory Pressure Test
====================
To show how this commit fixes the memory pressure situation well, I configured a test environment on a xen-running virtualization system. On the blkfront running guest instances, I attach a large number of network-backed volume devices and induce I/O to those. Meanwhile, I measure the number of pages that swapped in (pswpin) and out (pswpout) on the blkback running guest. The test ran twice, once for the blkback before this commit and once for that after this commit. As shown below, this commit has dramatically reduced the memory pressure:
pswpin pswpout
before 76,672 185,799
after 867 3,967Optimal Aggressive Shrinking Duration
-------------------------------------
To find a best squeezing duration, I repeated the test with three different durations (1ms, 10ms, and 100ms). The results are as below:
duration pswpin pswpout
1 707 5,095
10 867 3,967
100 362 3,348As expected, the memory pressure decreases as the duration increases, but the reduction become slow from the 10ms. Based on this results, I chose the default duration as 10ms.
Performance Overhead Test
=========================
This commit could incur I/O performance degradation under severe memory pressure because the squeezing will require more page allocations per I/O. To show the overhead, I artificially made a worst-case squeezing situation and measured the I/O performance of a blkfront running guest.
For the artificial squeezing, I set the blkback.max_buffer_pages using the /sys/module/xen_blkback/parameters/max_buffer_pages file. In this test, I set the value to 1024 and 0. The 1024 is the default value. Setting the value as 0 is same to a situation doing the squeezing always (worst-case).
If the underlying block device is slow enough, the squeezing overhead could be hidden. For the reason, I use a fast block device, namely the rbd[1]:
# xl block-attach guest phy:/dev/ram0 xvdb w
For the I/O performance measurement, I run a simple dd command 5 times directly to the device as below and collect the 'MB/s' results.
$ for i in {1..5}; do dd if=/dev/zero of=/dev/xvdb \
bs=4k count=$((256*512)); sync; doneThe results are as below. 'max_pgs' represents the value of the blkback.max_buffer_pages parameter.
max_pgs Min Max Median Avg Stddev
0 417 423 420 419.4 2.5099801
1024 414 425 416 417.8 4.4384682No difference proven at 95.0% confidence
In short, even worst case squeezing on ramdisk based fast block device makes no visible performance degradation. Please note that this is just a very simple and minimal test. On systems using super-fast block devices and a special I/O workload, the results might be different. If you have any doubt, test on your machine with your workload to find the optimal squeezing duration for you.
[1] https://www.kernel.org/doc/html/latest/admin-guide/blockdev/ramdisk.html
--- .../ABI/testing/sysfs-driver-xen-blkback | 10 ++++++++ drivers/block/xen-blkback/blkback.c | 7 ++++-- drivers/block/xen-blkback/common.h | 1 + drivers/block/xen-blkback/xenbus.c | 23 ++++++++++++++++++- 4 files changed, 38 insertions(+), 3 deletions(-)
Documentation/ABI/testing/sysfs-driver-xen-blkback +10 -0
@@ -25,3 +25,13 @@ Description: allocated without being in use. The time is in seconds, 0 means indefinitely long. The default is 60 seconds. + +What: /sys/module/xen_blkback/parameters/buffer_squeeze_duration_ms +Date: December 2019 +KernelVersion: 5.5 +Contact: SeongJae Park <[email protected]> +Description: + When memory pressure is reported to blkback this option + controls the duration in milliseconds that blkback will not + cache any page not backed by a grant mapping. + The default is 10ms.
drivers/block/xen-blkback/blkback.c +5 -2
@@ -656,8 +656,11 @@ int xen_blkif_schedule(void *arg) ring->next_lru = jiffies +msecs_to_jiffies (LRU_INTERVAL ); } -/* Shrink if we have more than xen_blkif_max_buffer_pages */ -shrink_free_pagepool (ring, xen_blkif_max_buffer_pages); +/* Shrink the free pages pool if it is too large. */ +if (time_before (jiffies, blkif->buffer_squeeze_end)) +shrink_free_pagepool (ring,0 ); +else +shrink_free_pagepool (ring, xen_blkif_max_buffer_pages);if (log_stats &&time_after (jiffies, ring->st_print))print_stats (ring);
drivers/block/xen-blkback/common.h +1 -0
@@ -319,6 +319,7 @@ struct xen_blkif {/* All rings for this device. */ struct xen_blkif_ring *rings;unsigned int nr_rings; +unsigned long buffer_squeeze_end; };struct seg_buf {
drivers/block/xen-blkback/xenbus.c +22 -1
@@ -824,6 +824,26 @@ static void frontend_changed(struct xenbus_device *dev, } +/* Once a memory pressure is detected, squeeze free page pools for a while. */ +static unsigned int buffer_squeeze_duration_ms =10 ; +module_param_named (buffer_squeeze_duration_ms, + buffer_squeeze_duration_ms, int,0644 ); +MODULE_PARM_DESC (buffer_squeeze_duration_ms, +"Duration in ms to squeeze pages buffer when a memory pressure is detected" ); + +/* +* Callback received when the memory pressure is detected. +*/ +static void reclaim_memory (struct xenbus_device *dev) +{ +struct backend_info *be =dev_get_drvdata (&dev->dev); + +if (!be) +return ; + be->blkif->buffer_squeeze_end = jiffies + +msecs_to_jiffies (buffer_squeeze_duration_ms); +} +/* ** Connection ** */
@@ -1115,7 +1135,8 @@ static struct xenbus_driver xen_blkbk_driver = { .ids = xen_blkbk_ids, .probe = xen_blkbk_probe, .remove = xen_blkbk_remove, - .otherend_changed = frontend_changed + .otherend_changed = frontend_changed, + .reclaim_memory = reclaim_memory, };int xen_blkif_xenbus_init (void )
Signature · 1 line
2.17.1
Re: [Xen-devel] [PATCH v13 3/5] xen/blkback: Squeeze page pools if a memory pressure is detected
Hello Roger,
Sorry if I'm disturbing your vacation. If you are already came back to work, may I ask your opinion about this patch?
Quoted 188 lines · On Wed, 18 Dec 2019 19:37:16 +0100 SeongJae Park <[email protected]> wrote:
From: SeongJae Park <[email protected]>
Each
blkifhas a free pages pool for the grant mapping. The size of the pool starts from zero and is increased on demand while processing the I/O requests. If current I/O requests handling is finished or 100 milliseconds has passed since last I/O requests handling, it checks and shrinks the pool to not exceed the size limit,max_buffer_pages.Therefore, host administrators can cause memory pressure in blkback by attaching a large number of block devices and inducing I/O. Such problematic situations can be avoided by limiting the maximum number of devices that can be attached, but finding the optimal limit is not so easy. Improper set of the limit can results in memory pressure or a resource underutilization. This commit avoids such problematic situations by squeezing the pools (returns every free page in the pool to the system) for a while (users can set this duration via a module parameter) if memory pressure is detected.
Discussions
===========The
blkback's original shrinking mechanism returns only pages in the pool which are not currently be used byblkbackto the system. In other words, the pages that are not mapped with granted pages. Because this commit is changing only the shrink limit but still uses the same freeing mechanism it does not touch pages which are currently mapping grants.Once memory pressure is detected, this commit keeps the squeezing limit for a user-specified time duration. The duration should be neither too long nor too short. If it is too long, the squeezing incurring overhead can reduce the I/O performance. If it is too short,
blkbackwill not free enough pages to reduce the memory pressure. This commit sets the value as10 millisecondsby default because it is a short time in terms of I/O while it is a long time in terms of memory operations. Also, as the original shrinking mechanism works for at least every 100 milliseconds, this could be a somewhat reasonable choice. I also tested other durations (refer to the below section for more details) and confirmed that 10 milliseconds is the one that works best with the test. That said, the proper duration depends on actual configurations and workloads. That's why this commit allows users to set the duration as a module parameter.Memory Pressure Test
====================To show how this commit fixes the memory pressure situation well, I configured a test environment on a xen-running virtualization system. On the
blkfrontrunning guest instances, I attach a large number of network-backed volume devices and induce I/O to those. Meanwhile, I measure the number of pages that swapped in (pswpin) and out (pswpout) on theblkbackrunning guest. The test ran twice, once for theblkbackbefore this commit and once for that after this commit. As shown below, this commit has dramatically reduced the memory pressure:pswpin pswpout before 76,672 185,799 after 867 3,967Optimal Aggressive Shrinking Duration
-------------------------------------To find a best squeezing duration, I repeated the test with three different durations (1ms, 10ms, and 100ms). The results are as below:
duration pswpin pswpout 1 707 5,095 10 867 3,967 100 362 3,348As expected, the memory pressure decreases as the duration increases, but the reduction become slow from the
10ms. Based on this results, I chose the default duration as 10ms.Performance Overhead Test
=========================This commit could incur I/O performance degradation under severe memory pressure because the squeezing will require more page allocations per I/O. To show the overhead, I artificially made a worst-case squeezing situation and measured the I/O performance of a
blkfrontrunning guest.For the artificial squeezing, I set the
blkback.max_buffer_pagesusing the/sys/module/xen_blkback/parameters/max_buffer_pagesfile. In this test, I set the value to1024and0. The1024is the default value. Setting the value as0is same to a situation doing the squeezing always (worst-case).If the underlying block device is slow enough, the squeezing overhead could be hidden. For the reason, I use a fast block device, namely the rbd[1]:
# xl block-attach guest phy:/dev/ram0 xvdb wFor the I/O performance measurement, I run a simple
ddcommand 5 times directly to the device as below and collect the 'MB/s' results.$ for i in {1..5}; do dd if=/dev/zero of=/dev/xvdb \ bs=4k count=$((256*512)); sync; doneThe results are as below. '
max_pgs' represents the value of theblkback.max_buffer_pagesparameter.max_pgs Min Max Median Avg Stddev 0 417 423 420 419.4 2.5099801 1024 414 425 416 417.8 4.4384682No difference proven at 95.0% confidence
In short, even worst case squeezing on ramdisk based fast block device makes no visible performance degradation. Please note that this is just a very simple and minimal test. On systems using super-fast block devices and a special I/O workload, the results might be different. If you have any doubt, test on your machine with your workload to find the optimal squeezing duration for you.
[1] https://www.kernel.org/doc/html/latest/admin-guide/blockdev/ramdisk.html
Signed-off-by SeongJae Park <[email protected]>--- .../ABI/testing/sysfs-driver-xen-blkback | 10 ++++++++ drivers/block/xen-blkback/blkback.c | 7 ++++-- drivers/block/xen-blkback/common.h | 1 + drivers/block/xen-blkback/xenbus.c | 23 ++++++++++++++++++- 4 files changed, 38 insertions(+), 3 deletions(-)Documentation/ABI/testing/sysfs-driver-xen-blkback +10
-0@@ -25,3 +25,13 @@ Description: allocated without being in use. The time is in seconds, 0 means indefinitely long. The default is 60 seconds. + +What: /sys/module/xen_blkback/parameters/buffer_squeeze_duration_ms +Date: December 2019 +KernelVersion: 5.5 +Contact: SeongJae Park <[email protected]> +Description: + When memory pressure is reported to blkback this option + controls the duration in milliseconds that blkback will not + cache any page not backed by a grant mapping. + The default is 10ms.drivers/block/xen-blkback/blkback.c +5
-2@@ -656,8 +656,11 @@ int xen_blkif_schedule(void *arg) ring->next_lru = jiffies +msecs_to_jiffies (LRU_INTERVAL ); } -/* Shrink if we have more than xen_blkif_max_buffer_pages */ -shrink_free_pagepool (ring, xen_blkif_max_buffer_pages); +/* Shrink the free pages pool if it is too large. */ +if (time_before (jiffies, blkif->buffer_squeeze_end)) +shrink_free_pagepool (ring,0 ); +else +shrink_free_pagepool (ring, xen_blkif_max_buffer_pages);if (log_stats &&time_after (jiffies, ring->st_print))print_stats (ring);drivers/block/xen-blkback/common.h +1
-0@@ -319,6 +319,7 @@ struct xen_blkif {/* All rings for this device. */ struct xen_blkif_ring *rings;unsigned int nr_rings; +unsigned long buffer_squeeze_end; };struct seg_buf {drivers/block/xen-blkback/xenbus.c +6
-0@@ -824,6 +824,26 @@ static void frontend_changed(struct xenbus_device *dev, } +/* Once a memory pressure is detected, squeeze free page pools for a while. */ +static unsigned int buffer_squeeze_duration_ms =10 ; +module_param_named (buffer_squeeze_duration_ms, + buffer_squeeze_duration_ms, int,0644 ); +MODULE_PARM_DESC (buffer_squeeze_duration_ms, +"Duration in ms to squeeze pages buffer when a memory pressure is detected" );
drivers/block/xen-blkback/xenbus.c static void frontend_changed(struct xenbus_device *dev, · line 842
Quoted 10 lines
drivers/block/xen-blkback/xenbus.c +10
-0+ +/* +* Callback received when the memory pressure is detected. +*/ +static void reclaim_memory (struct xenbus_device *dev) +{ +struct backend_info *be =dev_get_drvdata (&dev->dev); + +if (!be) +return ;
This null check is the only one change from the version
(https://lore.kernel.org/xen-devel/20191216093755.GJ11756@Air-de-Roger/)
you gave me the 'Reviewed-by' before. This check is necessary because 'reclaim_memory()' can be called before 'probe' or after 'remove' callback.
Thanks,
SeongJae Park
Quoted 19 lines
drivers/block/xen-blkback/xenbus.c +6
-1+ be->blkif->buffer_squeeze_end = jiffies + +msecs_to_jiffies (buffer_squeeze_duration_ms); +} +/* ** Connection ** */ @@ -1115,7 +1135,8 @@ static struct xenbus_driver xen_blkbk_driver = { .ids = xen_blkbk_ids, .probe = xen_blkbk_probe, .remove = xen_blkbk_remove, - .otherend_changed = frontend_changed + .otherend_changed = frontend_changed, + .reclaim_memory = reclaim_memory, };int xen_blkif_xenbus_init (void )Signature · 1 line
2.17.1
Re: [PATCH v13 3/5] xen/blkback: Squeeze page pools if a memory pressure is detected
In reply to SeongJae ParkQuoted 116 lines · SeongJae Park
From: SeongJae Park <[email protected]>
Each
blkifhas a free pages pool for the grant mapping. The size of the pool starts from zero and is increased on demand while processing the I/O requests. If current I/O requests handling is finished or 100 milliseconds has passed since last I/O requests handling, it checks and shrinks the pool to not exceed the size limit,max_buffer_pages.Therefore, host administrators can cause memory pressure in blkback by attaching a large number of block devices and inducing I/O. Such problematic situations can be avoided by limiting the maximum number of devices that can be attached, but finding the optimal limit is not so easy. Improper set of the limit can results in memory pressure or a resource underutilization. This commit avoids such problematic situations by squeezing the pools (returns every free page in the pool to the system) for a while (users can set this duration via a module parameter) if memory pressure is detected.
Discussions
===========The
blkback's original shrinking mechanism returns only pages in the pool which are not currently be used byblkbackto the system. In other words, the pages that are not mapped with granted pages. Because this commit is changing only the shrink limit but still uses the same freeing mechanism it does not touch pages which are currently mapping grants.Once memory pressure is detected, this commit keeps the squeezing limit for a user-specified time duration. The duration should be neither too long nor too short. If it is too long, the squeezing incurring overhead can reduce the I/O performance. If it is too short,
blkbackwill not free enough pages to reduce the memory pressure. This commit sets the value as10 millisecondsby default because it is a short time in terms of I/O while it is a long time in terms of memory operations. Also, as the original shrinking mechanism works for at least every 100 milliseconds, this could be a somewhat reasonable choice. I also tested other durations (refer to the below section for more details) and confirmed that 10 milliseconds is the one that works best with the test. That said, the proper duration depends on actual configurations and workloads. That's why this commit allows users to set the duration as a module parameter.Memory Pressure Test
====================To show how this commit fixes the memory pressure situation well, I configured a test environment on a xen-running virtualization system. On the
blkfrontrunning guest instances, I attach a large number of network-backed volume devices and induce I/O to those. Meanwhile, I measure the number of pages that swapped in (pswpin) and out (pswpout) on theblkbackrunning guest. The test ran twice, once for theblkbackbefore this commit and once for that after this commit. As shown below, this commit has dramatically reduced the memory pressure:pswpin pswpout before 76,672 185,799 after 867 3,967Optimal Aggressive Shrinking Duration
-------------------------------------To find a best squeezing duration, I repeated the test with three different durations (1ms, 10ms, and 100ms). The results are as below:
duration pswpin pswpout 1 707 5,095 10 867 3,967 100 362 3,348As expected, the memory pressure decreases as the duration increases, but the reduction become slow from the
10ms. Based on this results, I chose the default duration as 10ms.Performance Overhead Test
=========================This commit could incur I/O performance degradation under severe memory pressure because the squeezing will require more page allocations per I/O. To show the overhead, I artificially made a worst-case squeezing situation and measured the I/O performance of a
blkfrontrunning guest.For the artificial squeezing, I set the
blkback.max_buffer_pagesusing the/sys/module/xen_blkback/parameters/max_buffer_pagesfile. In this test, I set the value to1024and0. The1024is the default value. Setting the value as0is same to a situation doing the squeezing always (worst-case).If the underlying block device is slow enough, the squeezing overhead could be hidden. For the reason, I use a fast block device, namely the rbd[1]:
# xl block-attach guest phy:/dev/ram0 xvdb wFor the I/O performance measurement, I run a simple
ddcommand 5 times directly to the device as below and collect the 'MB/s' results.$ for i in {1..5}; do dd if=/dev/zero of=/dev/xvdb \ bs=4k count=$((256*512)); sync; doneThe results are as below. '
max_pgs' represents the value of theblkback.max_buffer_pagesparameter.max_pgs Min Max Median Avg Stddev 0 417 423 420 419.4 2.5099801 1024 414 425 416 417.8 4.4384682No difference proven at 95.0% confidence
In short, even worst case squeezing on ramdisk based fast block device makes no visible performance degradation. Please note that this is just a very simple and minimal test. On systems using super-fast block devices and a special I/O workload, the results might be different. If you have any doubt, test on your machine with your workload to find the optimal squeezing duration for you.
Quoted 3 lines
[1] https://www.kernel.org/doc/html/latest/admin-guide/blockdev/ramdisk.html
Signed-off-by SeongJae Park <[email protected]>
Thanks, and sorry for the delay!
Roger.
PATCH v13 4/5 xen/blkback: Remove unnecessary static variable name prefixes
In reply to SeongJae ParkFrom: SeongJae Park <[email protected]>
A few of static variables in blkback have 'xen_blkif_' prefix, though it is unnecessary for static variables. This commit removes such prefixes.
--- drivers/block/xen-blkback/blkback.c | 37 +++++++++++++---------------- 1 file changed, 17 insertions(+), 20 deletions(-)
drivers/block/xen-blkback/blkback.c +17 -20
@@ -62,8 +62,8 @@* IO workloads. */ -static int xen_blkif_max_buffer_pages =1024 ; -module_param_named (max_buffer_pages, xen_blkif_max_buffer_pages, int,0644 ); +static int max_buffer_pages =1024 ; +module_param_named (max_buffer_pages, max_buffer_pages, int,0644 );MODULE_PARM_DESC (max_buffer_pages,"Maximum number of free pages to keep in each block backend buffer" );
@@ -78,8 +78,8 @@ MODULE_PARM_DESC(max_buffer_pages,* algorithm. */ -static int xen_blkif_max_pgrants =1056 ; -module_param_named (max_persistent_grants, xen_blkif_max_pgrants, int,0644 ); +static int max_pgrants =1056 ; +module_param_named (max_persistent_grants, max_pgrants, int,0644 );MODULE_PARM_DESC (max_persistent_grants,"Maximum number of grants to map persistently" );
@@ -88,8 +88,8 @@ MODULE_PARM_DESC(max_persistent_grants,* use. The time is in seconds, 0 means indefinitely long. */ -static unsigned int xen_blkif_pgrant_timeout =60 ; -module_param_named (persistent_grant_unused_seconds, xen_blkif_pgrant_timeout, +static unsigned int pgrant_timeout =60 ; +module_param_named (persistent_grant_unused_seconds, pgrant_timeout, uint,0644 );MODULE_PARM_DESC (persistent_grant_unused_seconds, "Time in seconds an unused persistent grant is allowed to "
@@ -137,9 +137,8 @@ module_param(log_stats, int, 0644);static inline bool persistent_gnt_timeout (struct persistent_gnt *persistent_gnt) { -return xen_blkif_pgrant_timeout && - (jiffies - persistent_gnt->last_used >= -HZ * xen_blkif_pgrant_timeout); +return pgrant_timeout && (jiffies - persistent_gnt->last_used >= +HZ * pgrant_timeout); }static inline int get_free_page (struct xen_blkif_ring *ring,struct page **page)
@@ -234,7 +233,7 @@ static int add_persistent_gnt(struct xen_blkif_ring *ring,struct persistent_gnt *this;struct xen_blkif *blkif = ring->blkif; -if (ring->persistent_gnt_c >= xen_blkif_max_pgrants) { +if (ring->persistent_gnt_c >= max_pgrants) {if (!blkif->vbd.overflow_max_grants) blkif->vbd.overflow_max_grants =1 ;return -EBUSY ;
@@ -397,14 +396,13 @@ static void purge_persistent_gnt(struct xen_blkif_ring *ring) goto out; } -if (ring->persistent_gnt_c < xen_blkif_max_pgrants || - (ring->persistent_gnt_c == xen_blkif_max_pgrants && +if (ring->persistent_gnt_c < max_pgrants || + (ring->persistent_gnt_c == max_pgrants && !ring->blkif->vbd.overflow_max_grants)) { num_clean =0 ; }else { - num_clean = (xen_blkif_max_pgrants /100 ) *LRU_PERCENT_CLEAN ; - num_clean = ring->persistent_gnt_c - xen_blkif_max_pgrants + - num_clean; + num_clean = (max_pgrants /100 ) *LRU_PERCENT_CLEAN ; + num_clean = ring->persistent_gnt_c - max_pgrants + num_clean; num_clean =min (ring->persistent_gnt_c, num_clean);pr_debug ("Going to purge at least %u persistent grants\n" , num_clean);
@@ -599,8 +597,7 @@ static void print_stats(struct xen_blkif_ring *ring) current->comm, ring->st_oo_req, ring->st_rd_req, ring->st_wr_req, ring->st_f_req, ring->st_ds_req, - ring->persistent_gnt_c, - xen_blkif_max_pgrants); + ring->persistent_gnt_c, max_pgrants); ring->st_print = jiffies +msecs_to_jiffies (10 *1000 ); ring->st_rd_req =0 ; ring->st_wr_req =0 ;
@@ -660,7 +657,7 @@ int xen_blkif_schedule(void *arg)if (time_before (jiffies, blkif->buffer_squeeze_end))shrink_free_pagepool (ring,0 );else -shrink_free_pagepool (ring, xen_blkif_max_buffer_pages); +shrink_free_pagepool (ring, max_buffer_pages);if (log_stats &&time_after (jiffies, ring->st_print))print_stats (ring);
@@ -887,7 +884,7 @@ static int xen_blkbk_map(struct xen_blkif_ring *ring,continue ; }if (use_persistent_gnts && - ring->persistent_gnt_c < xen_blkif_max_pgrants) { + ring->persistent_gnt_c < max_pgrants) {/* * We are using persistent grants, the grant is * not mapped but we might have room for it.
@@ -914,7 +911,7 @@ static int xen_blkbk_map(struct xen_blkif_ring *ring, pages[seg_idx]->persistent_gnt = persistent_gnt;pr_debug ("grant %u added to the tree of persistent grants, using %u/%u\n" , persistent_gnt->gnt, ring->persistent_gnt_c, - xen_blkif_max_pgrants); + max_pgrants); goto next; }if (use_persistent_gnts && !blkif->vbd.overflow_max_grants) {
Signature · 1 line
2.17.1
PATCH v13 4/5 xen/blkback: Remove unnecessary static variable name prefixes
In reply to SeongJae ParkFrom: SeongJae Park <[email protected]>
A few of static variables in blkback have 'xen_blkif_' prefix, though it is unnecessary for static variables. This commit removes such prefixes.
--- drivers/block/xen-blkback/blkback.c | 37 +++++++++++++---------------- 1 file changed, 17 insertions(+), 20 deletions(-)
drivers/block/xen-blkback/blkback.c +17 -20
@@ -62,8 +62,8 @@* IO workloads. */ -static int xen_blkif_max_buffer_pages =1024 ; -module_param_named (max_buffer_pages, xen_blkif_max_buffer_pages, int,0644 ); +static int max_buffer_pages =1024 ; +module_param_named (max_buffer_pages, max_buffer_pages, int,0644 );MODULE_PARM_DESC (max_buffer_pages,"Maximum number of free pages to keep in each block backend buffer" );
@@ -78,8 +78,8 @@ MODULE_PARM_DESC(max_buffer_pages,* algorithm. */ -static int xen_blkif_max_pgrants =1056 ; -module_param_named (max_persistent_grants, xen_blkif_max_pgrants, int,0644 ); +static int max_pgrants =1056 ; +module_param_named (max_persistent_grants, max_pgrants, int,0644 );MODULE_PARM_DESC (max_persistent_grants,"Maximum number of grants to map persistently" );
@@ -88,8 +88,8 @@ MODULE_PARM_DESC(max_persistent_grants,* use. The time is in seconds, 0 means indefinitely long. */ -static unsigned int xen_blkif_pgrant_timeout =60 ; -module_param_named (persistent_grant_unused_seconds, xen_blkif_pgrant_timeout, +static unsigned int pgrant_timeout =60 ; +module_param_named (persistent_grant_unused_seconds, pgrant_timeout, uint,0644 );MODULE_PARM_DESC (persistent_grant_unused_seconds, "Time in seconds an unused persistent grant is allowed to "
@@ -137,9 +137,8 @@ module_param(log_stats, int, 0644);static inline bool persistent_gnt_timeout (struct persistent_gnt *persistent_gnt) { -return xen_blkif_pgrant_timeout && - (jiffies - persistent_gnt->last_used >= -HZ * xen_blkif_pgrant_timeout); +return pgrant_timeout && (jiffies - persistent_gnt->last_used >= +HZ * pgrant_timeout); }static inline int get_free_page (struct xen_blkif_ring *ring,struct page **page)
@@ -234,7 +233,7 @@ static int add_persistent_gnt(struct xen_blkif_ring *ring,struct persistent_gnt *this;struct xen_blkif *blkif = ring->blkif; -if (ring->persistent_gnt_c >= xen_blkif_max_pgrants) { +if (ring->persistent_gnt_c >= max_pgrants) {if (!blkif->vbd.overflow_max_grants) blkif->vbd.overflow_max_grants =1 ;return -EBUSY ;
@@ -397,14 +396,13 @@ static void purge_persistent_gnt(struct xen_blkif_ring *ring) goto out; } -if (ring->persistent_gnt_c < xen_blkif_max_pgrants || - (ring->persistent_gnt_c == xen_blkif_max_pgrants && +if (ring->persistent_gnt_c < max_pgrants || + (ring->persistent_gnt_c == max_pgrants && !ring->blkif->vbd.overflow_max_grants)) { num_clean =0 ; }else { - num_clean = (xen_blkif_max_pgrants /100 ) *LRU_PERCENT_CLEAN ; - num_clean = ring->persistent_gnt_c - xen_blkif_max_pgrants + - num_clean; + num_clean = (max_pgrants /100 ) *LRU_PERCENT_CLEAN ; + num_clean = ring->persistent_gnt_c - max_pgrants + num_clean; num_clean =min (ring->persistent_gnt_c, num_clean);pr_debug ("Going to purge at least %u persistent grants\n" , num_clean);
@@ -599,8 +597,7 @@ static void print_stats(struct xen_blkif_ring *ring) current->comm, ring->st_oo_req, ring->st_rd_req, ring->st_wr_req, ring->st_f_req, ring->st_ds_req, - ring->persistent_gnt_c, - xen_blkif_max_pgrants); + ring->persistent_gnt_c, max_pgrants); ring->st_print = jiffies +msecs_to_jiffies (10 *1000 ); ring->st_rd_req =0 ; ring->st_wr_req =0 ;
@@ -660,7 +657,7 @@ int xen_blkif_schedule(void *arg)if (time_before (jiffies, blkif->buffer_squeeze_end))shrink_free_pagepool (ring,0 );else -shrink_free_pagepool (ring, xen_blkif_max_buffer_pages); +shrink_free_pagepool (ring, max_buffer_pages);if (log_stats &&time_after (jiffies, ring->st_print))print_stats (ring);
@@ -887,7 +884,7 @@ static int xen_blkbk_map(struct xen_blkif_ring *ring,continue ; }if (use_persistent_gnts && - ring->persistent_gnt_c < xen_blkif_max_pgrants) { + ring->persistent_gnt_c < max_pgrants) {/* * We are using persistent grants, the grant is * not mapped but we might have room for it.
@@ -914,7 +911,7 @@ static int xen_blkbk_map(struct xen_blkif_ring *ring, pages[seg_idx]->persistent_gnt = persistent_gnt;pr_debug ("grant %u added to the tree of persistent grants, using %u/%u\n" , persistent_gnt->gnt, ring->persistent_gnt_c, - xen_blkif_max_pgrants); + max_pgrants); goto next; }if (use_persistent_gnts && !blkif->vbd.overflow_max_grants) {
Signature · 1 line
2.17.1
PATCH v13 5/5 xen/blkback: Consistently insert one empty line between functions
In reply to SeongJae ParkFrom: SeongJae Park <[email protected]>
The number of empty lines between functions in the xenbus.c is inconsistent. This trivial style cleanup commit fixes the file to consistently place only one empty line.
--- drivers/block/xen-blkback/xenbus.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
drivers/block/xen-blkback/xenbus.c +2 -5
@@ -432,7 +432,6 @@ static void xenvbd_sysfs_delif(struct xenbus_device *dev)device_remove_file (&dev->dev, &dev_attr_physical_device); } -static void xen_vbd_free (struct xen_vbd *vbd) {if (vbd->bdev)
@@ -489,6 +488,7 @@ static int xen_vbd_create(struct xen_blkif *blkif, blkif_vdev_t handle, handle, blkif->domid);return 0 ; } +static int xen_blkbk_remove (struct xenbus_device *dev) {struct backend_info *be =dev_get_drvdata (&dev->dev);
@@ -572,6 +572,7 @@ static void xen_blkbk_discard(struct xenbus_transaction xbt, struct backend_infoif (err)dev_warn (&dev->dev,"writing feature-discard (%d)" , err); } +int xen_blkbk_barrier (struct xenbus_transaction xbt,struct backend_info *be,int state) {
@@ -656,7 +657,6 @@ static int xen_blkbk_probe(struct xenbus_device *dev,return err; } -/* * Callback received when the hotplug scripts have placed the physical-device * node. Read it and the mode node, and create a vbd. If the frontend is
@@ -748,7 +748,6 @@ static void backend_changed(struct xenbus_watch *watch, } } -/* * Callback received when the frontend's state changes. */
@@ -823,7 +822,6 @@ static void frontend_changed(struct xenbus_device *dev, } } -/* Once a memory pressure is detected, squeeze free page pools for a while. */ static unsigned int buffer_squeeze_duration_ms =10 ; module_param_named(buffer_squeeze_duration_ms,
@@ -846,7 +844,6 @@ static void reclaim_memory(struct xenbus_device *dev)/* ** Connection ** */ -/* * Write the physical details regarding the block device to the store, and * switch to Connected state.
Signature · 1 line
2.17.1
Every patch of this patchset got at least one 'Reviewed-by' or 'Acked-by' from appropriate maintainers by last Wednesday, and after that, got no comment yet. May I ask some more comments?
Thanks,
SeongJae Park
Quoted 136 lines · On Wed, 18 Dec 2019 19:37:13 +0100 SeongJae Park <[email protected]> wrote:
Granting pages consumes backend system memory. In systems configured with insufficient spare memory for those pages, it can cause a memory pressure situation. However, finding the optimal amount of the spare memory is challenging for large systems having dynamic resource utilization patterns. Also, such a static configuration might lack flexibility.
To mitigate such problems, this patchset adds a memory reclaim callback to '
xenbus_driver' (patch 1) and then introduce a lock for race condition avoidance (patch 2). After that, patch 3 applies the callback mechanism to mitigate the problem in 'xen-blkback'. The fourth and fifth patches are trivial cleanups; those fix nits we found during the development of this patchset.Note that patches 1, 4, and 5 are not changed since v9.
Base Version
------------This patch is based on v5.4. A complete tree is also available at my public git repo:
https://github.com/sjp38/linux/tree/patches/blkback/buffer_squeeze/v13Patch History
-------------Changes from v12
(https://lore.kernel.org/xen-devel/[email protected]/)
- Do not unnecessarily disable interrupts (suggested by Juergen)
- Hold lock from xenbus side (suggested by Juergen)Changes from v11
(https://lore.kernel.org/xen-devel/[email protected]/)
- Fix wrong trylock use (reported by Juergen)
- Merge patch 3 and 4 (suggested by Juergen)
- Update test resultChanges from v10
(https://lore.kernel.org/xen-devel/[email protected]/)
- Fix race condition (reported by SeongJae, suggested by Juergen)Changes from v9
(https://lore.kernel.org/xen-devel/[email protected]/)
- Add 'Reviewed-by' and 'Acked-by' from Roger Pau Monné
- Update the commit message for overhead test of the 2nd pathChanges from v8
(https://lore.kernel.org/xen-devel/[email protected]/)
- Drop 'Reviewed-by: Juergen' from the second patch (suggested by Roger Pau Monné)
- Update contact of the new module param to SeongJae Park <[email protected]>
(suggested by Roger Pau Monné)
- Wordsmith the description of the parameter
(suggested by Roger Pau Monné)
- Fix dumb bugs
(suggested by Roger Pau Monné)
- Move module param definition toxenbus.cand reduce the number of lines for this change
(suggested by Roger Pau Monné)
- Add a comment for the new callback,reclaim_memory, as other callbacks also have
- Add another trivial cleanup ofxenbus.cfile (4th patch)Changes from v7
(https://lore.kernel.org/xen-devel/[email protected]/)
- Update sysfs-driver-xen-blkback for new parameter (suggested by Roger Pau Monné)
- Use per-xen_blkifbuffer_squeeze_endinstead of global variable (suggested by Roger Pau Monné)Changes from v6
(https://lore.kernel.org/linux-block/[email protected]/)
- Remove more unnecessary prefixes (suggested by Roger Pau Monné)
- Constify a variable (suggested by Roger Pau Monné)
- Rename 'reclaim' into 'reclaim_memory' (suggested by Roger Pau Monné)
- More wordsmith of the commit message (suggested by Roger Pau Monné)Changes from v5
(https://lore.kernel.org/linux-block/[email protected]/)
- Wordsmith the commit messages (suggested by Roger Pau Monné)
- Change the reclaim callback return type (suggested by Roger Pau Monné)
- Change the type of the blkback squeeze duration variable (suggested by Roger Pau Monné)
- Add a patch for removal of unnecessary static variable name prefixes (suggested by Roger Pau Monné)
- Fix checkpatch.pl warningsChanges from v4
(https://lore.kernel.org/xen-devel/[email protected]/)
- Remove domain id parameter from the callback (suggested by Juergen Gross)
- Rename xen-blkback module parameter (suggested by Stefan Nuernburger)Changes from v3
(https://lore.kernel.org/xen-devel/[email protected]/)
- Add general callback inxen_driverand use it (suggested by Juergen Gross)Changes from v2
(https://lore.kernel.org/linux-block/[email protected])
- Rename the module parameter and variables for brevity (aggressive shrinking -> squeezing)Changes from v1
(https://lore.kernel.org/xen-devel/[email protected]/)
- Adjust the description to not use the term,arbitrarily(suggested by Paul Durrant)
- Specify time unit of the duration in the parameter description, (suggested by Maximilian Heyne)
- Change default aggressive shrinking duration from 1ms to 10ms
- Merge two patches into one single patchSeongJae Park (5):
xenbus/backend: Add memory pressure handler callback xenbus/backend: Protect xenbus callback with lock xen/blkback: Squeeze page pools if a memory pressure is detected xen/blkback: Remove unnecessary static variable name prefixes xen/blkback: Consistently insert one empty line between functions.../ABI/testing/sysfs-driver-xen-blkback | 10 +++++ drivers/block/xen-blkback/blkback.c | 42 +++++++++---------- drivers/block/xen-blkback/common.h | 1 + drivers/block/xen-blkback/xenbus.c | 28 ++++++++++--- drivers/xen/xenbus/xenbus_probe.c | 8 +++- drivers/xen/xenbus/xenbus_probe_backend.c | 38 +++++++++++++++++ include/xen/xenbus.h | 3 ++ 7 files changed, 103 insertions(+), 27 deletions(-)Signature · 1 line
2.17.1
Quoted 3 lines · SeongJae Park
Every patch of this patchset got at least one 'Reviewed-by' or 'Acked-by' from appropriate maintainers by last Wednesday, and after that, got no comment yet. May I ask some more comments?
I'm not sure why more comments are needed, patches have all the relevant Acks and will be pushed in due time unless someone has objections.
Please be patient and wait at least until the next merge window, this patches are not bug fixes so pushing them now would be wrong.
Roger.
Quoted 11 lines · On Mon, 13 Jan 2020 10:55:07 +0100 "Roger Pau Monné" <[email protected]>…
Quoted 3 lines · SeongJae Park
Every patch of this patchset got at least one 'Reviewed-by' or 'Acked-by' from appropriate maintainers by last Wednesday, and after that, got no comment yet. May I ask some more comments?
I'm not sure why more comments are needed, patches have all the relevant Acks and will be pushed in due time unless someone has objections.
Please be patient and wait at least until the next merge window, this patches are not bug fixes so pushing them now would be wrong.
Ok, I will. Thank you for your quick and nice reply.
Thanks,
SeongJae Park
Quoted 3 lines
Roger.