Skip to contentSkip to conversation

APFS and BTRFS

DISCUSSION Forrest Aldrich 3 participants 5 messages Mar 20, 2021 – Mar 27, 2021 1 message not in the archive Btrfs file system

lore
Share & tools
lore
#0 lore raw

I have a really large (3+ TB) volume I am copying to a BTRFS volume (both over USB) which is painfully slow.  In fact, it will probably take days to complete.   My goal is to use BTRFS on that larger USB volume (it's an 18TB drive)....

I don't suppose there is a way to convert APFS to BTRFS :)   I know, but I thought I would ask as it seems like others may have a similar query.

Thx...

#1 lore raw
Quoted 7 lines · Forrest Aldrich

I have a really large (3+ TB) volume I am copying to a BTRFS volume (both over USB) which is painfully slow.  In fact, it will probably take days to complete.   My goal is to use BTRFS on that larger USB volume (it's an 18TB drive)....

I don't suppose there is a way to convert APFS to BTRFS :)   I know, but I thought I would ask as it seems like others may have a similar query.

Convert relies on libraries providing the API to access the source filesystems, I don't see anything like that for APFS so it would have to be written from scratch. The linux-apfs project does not seem to be active, last update 2 years ago. If it's just days of copying, I think it's the better and safer option.

A message that is not in the archive (sent off-list or not yet received): CAA+gEba91br_M6qERcwL5no=DdMSw3QA7iNwf8OGwskX=9Z6_g@mail.gmail.com

#3 lore raw

I have apfs-fuse running, but it is read-only.

I wanted to avoid the pain of replicating a large disk from USB3 to USB3 by converting the filesystem, which I expected wouldn't be possible.  So now I am just replicating it, which will take days to accomplish.

Thanks.

Quoted 8 lines · acc

Read-only;
- linux-apfs read-only version, linux-apfs-oot
https://github.com/linux-apfs/linux-apfs-oot <https://github.com/linux-apfs/linux-apfs-oot>
- apfs-fuse https://github.com/sgan81/apfs-fuse
<https://github.com/sgan81/apfs-fuse>
- Linux-Reader, from DiskInternals, a Windows(!) freeware

ACC

#4 lore raw
Quoted 4 lines · Forrest Aldrich

I have apfs-fuse running, but it is read-only.

I wanted to avoid the pain of replicating a large disk from USB3 to USB3 by converting the filesystem, which I expected wouldn't be possible.  So now I am just replicating it, which will take days to accomplish.

Have you considered taking the disks out of the USB enclosure and putting them directly on the SATA controller? It could be faster.

~Forza

#5 lore raw

I'm taking data from the 18TB drive and placing it onto the USB-drive array I built (slower) -- it's on a USB 3.0 bus, off a raspberry pi, so very limited in terms of what I can do for that. It's a hackup job I'm building for longer term storage.  The real bottleneck is the USB3.x bus and the USB-based disks I have striped together -- yes, i know it's a hack :)

Quoted 10 lines · Forza
Quoted 4 lines · Forrest Aldrich

I have apfs-fuse running, but it is read-only.

I wanted to avoid the pain of replicating a large disk from USB3 to USB3 by converting the filesystem, which I expected wouldn't be possible.  So now I am just replicating it, which will take days to accomplish.

Have you considered taking the disks out of the USB enclosure and putting them directly on the SATA controller? It could be faster.

~Forza