ARM: dts: Add DMA controller node info on Exynos5420.
Subsystems (2)
PATCH RESEND v3 1/1 ARM: dts: Add DMA controller node info on Exynos5420.
From: Padmavathi Venna <[email protected]>
This patch adds dma controller node info on Exynos5420. Exynos5420 has adma for audio IPs. As adma clk is dependent on audss clk provider that will be added later.
---
Change since V2:
- Removed adma node as adma clock is dependent audss clock provider.
Changes since V1:
- In V1, dma node common stuff was added in common exynos5.dtsi file. This was removed as per Kukjin comment and added in exynos5420.dtsi.
arch/arm/boot/dts/exynos5420.dtsi | 52 +++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+)
arch/arm/boot/dts/exynos5420.dtsi +52 -0
@@ -186,6 +186,58 @@ status = "okay"; }; + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@121A0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121A0000 0x1000>; + interrupts = <0 34 0>; + clocks = <&clock 362>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@121B0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121B0000 0x1000>; + interrupts = <0 35 0>; + clocks = <&clock 363>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + mdma0: mdma@10800000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10800000 0x1000>; + interrupts = <0 33 0>; + clocks = <&clock 473>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + + mdma1: mdma@11C10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11C10000 0x1000>; + interrupts = <0 124 0>; + clocks = <&clock 442>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + }; + serial@12C00000 { clocks = <&clock 257>, <&clock 128>; clock-names = "uart", "clk_uart_baud0";
Signature · 1 line
1.7.10.4
Kukjin Kim
AppliedPATCH RESEND v3 1/1 ARM: dts: Add DMA controller node info on Exynos5420.
Quoted 1 line · Leela Krishna Amudala
+ dt ml.
Quoted 6 lines
From: Padmavathi Venna <[email protected]>
This patch adds dma controller node info on Exynos5420. Exynos5420 has adma for audio IPs. As adma clk is dependent on audss clk provider that will be added later.
Quoted 8 lines
Signed-off-by Padmavathi Venna <[email protected]>Signed-off-by Leela Krishna Amudala <[email protected]>---
Change since V2:
- Removed adma node as adma clock is dependent audss clock provider.Changes since V1:
- In V1, dma node common stuff was added in commonexynos5.dtsi
file.
Quoted 72 lines
This was removed as per Kukjin comment and added in
exynos5420.dtsi.arch/arm/boot/dts/exynos5420.dtsi | 52 +++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+)arch/arm/boot/dts/exynos5420.dtsi +52
-1@@ -186,6 +186,58 @@ status = "okay"; }; + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma at 121A0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121A0000 0x1000>; + interrupts = <0 34 0>; + clocks = <&clock 362>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma at 121B0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121B0000 0x1000>; + interrupts = <0 35 0>; + clocks = <&clock 363>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + mdma0: mdma at 10800000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10800000 0x1000>; + interrupts = <0 33 0>; + clocks = <&clock 473>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + + mdma1: mdma at 11C10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11C10000 0x1000>; + interrupts = <0 124 0>; + clocks = <&clock 442>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + }; + serial at 12C00000 { clocks = <&clock 257>, <&clock 128>; clock-names = "uart", "clk_uart_baud0"; --
Quoted 1 line
1.7.10.4
Sorry for late response.
Looks OK to me, many properties for dma are same with 5250 though...
Applied, thanks.
- Kukjin
PATCH RESEND v3 1/1 ARM: dts: Add DMA controller node info on Exynos5420.
Hi Kukjin,
Even though you said it is applied, I didn't see this patch in any of your trees.
Can you kindly look into this patch and take necessary action..?
Best Wishes,
Leela Krishna.
Quoted 104 lines · Kukjin Kim
Quoted 1 line · Leela Krishna Amudala
+ dt ml.
Quoted 6 lines
From: Padmavathi Venna <[email protected]>
This patch adds dma controller node info on Exynos5420. Exynos5420 has adma for audio IPs. As adma clk is dependent on audss clk provider that will be added later.
Quoted 8 lines
Signed-off-by Padmavathi Venna <[email protected]>Signed-off-by Leela Krishna Amudala <[email protected]>---
Change since V2:
- Removed adma node as adma clock is dependent audss clock provider.Changes since V1:
- In V1, dma node common stuff was added in commonexynos5.dtsifile.
Quoted 72 lines
This was removed as per Kukjin comment and added in
exynos5420.dtsi.arch/arm/boot/dts/exynos5420.dtsi | 52 +++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+)arch/arm/boot/dts/exynos5420.dtsi +52
-1@@ -186,6 +186,58 @@ status = "okay"; }; + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma at 121A0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121A0000 0x1000>; + interrupts = <0 34 0>; + clocks = <&clock 362>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma at 121B0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121B0000 0x1000>; + interrupts = <0 35 0>; + clocks = <&clock 363>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + mdma0: mdma at 10800000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10800000 0x1000>; + interrupts = <0 33 0>; + clocks = <&clock 473>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + + mdma1: mdma at 11C10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11C10000 0x1000>; + interrupts = <0 124 0>; + clocks = <&clock 442>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + }; + serial at 12C00000 { clocks = <&clock 257>, <&clock 128>; clock-names = "uart", "clk_uart_baud0"; --Quoted 1 line
1.7.10.4
Sorry for late response.
Looks OK to me, many properties for dma are same with 5250 though...
Applied, thanks.
- Kukjin--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Kukjin Kim
AppliedPATCH RESEND v3 1/1 ARM: dts: Add DMA controller node info on Exynos5420.
Quoted 6 lines · Leela Krishna Amudala
Hi Kukjin,
Even though you said it is applied, I didn't see this patch in any of your trees.
Can you kindly look into this patch and take necessary action..?
Applied, thanks.
Kukjin
Quoted 96 lines
Best Wishes,
Leela Krishna.Quoted 92 lines · Kukjin Kim
Quoted 1 line · Leela Krishna Amudala
+ dt ml.
Quoted 6 lines
From: Padmavathi Venna<[email protected]>
This patch adds dma controller node info on Exynos5420. Exynos5420 has adma for audio IPs. As adma clk is dependent on audss clk provider that will be added later.
Quoted 8 lines
Signed-off-by Padmavathi Venna<[email protected]>Signed-off-by Leela Krishna Amudala<[email protected]>---
Change since V2:
- Removed adma node as adma clock is dependent audss clock provider.Changes since V1:
- In V1, dma node common stuff was added in commonexynos5.dtsifile.
Quoted 73 lines
This was removed as per Kukjin comment and added in
exynos5420.dtsi.arch/arm/boot/dts/exynos5420.dtsi | 52 +++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+)arch/arm/boot/dts/exynos5420.dtsi +52
-1@@ -186,6 +186,58 @@ status = "okay"; }; + amba { + #address-cells =<1>; + #size-cells =<1>; + compatible = "arm,amba-bus"; + interrupt-parent =<&gic>; + ranges; + + pdma0: pdma at 121A0000 { + compatible = "arm,pl330", "arm,primecell"; + reg =<0x121A0000 0x1000>; + interrupts =<0 34 0>; + clocks =<&clock 362>; + clock-names = "apb_pclk"; + #dma-cells =<1>; + #dma-channels =<8>; + #dma-requests =<32>; + }; + + pdma1: pdma at 121B0000 { + compatible = "arm,pl330", "arm,primecell"; + reg =<0x121B0000 0x1000>; + interrupts =<0 35 0>; + clocks =<&clock 363>; + clock-names = "apb_pclk"; + #dma-cells =<1>; + #dma-channels =<8>; + #dma-requests =<32>; + }; + + mdma0: mdma at 10800000 { + compatible = "arm,pl330", "arm,primecell"; + reg =<0x10800000 0x1000>; + interrupts =<0 33 0>; + clocks =<&clock 473>; + clock-names = "apb_pclk"; + #dma-cells =<1>; + #dma-channels =<8>; + #dma-requests =<1>; + }; + + mdma1: mdma at 11C10000 { + compatible = "arm,pl330", "arm,primecell"; + reg =<0x11C10000 0x1000>; + interrupts =<0 124 0>; + clocks =<&clock 442>; + clock-names = "apb_pclk"; + #dma-cells =<1>; + #dma-channels =<8>; + #dma-requests =<1>; + }; + }; + serial at 12C00000 { clocks =<&clock 257>,<&clock 128>; clock-names = "uart", "clk_uart_baud0"; --1.7.10.4