questions about io scheduler
1. Is anticipatory io scheduler + echo 0 > /sys/block/hd*/queue/iosched/antic_expire = deadline scheduler?
2. Does io scheduler works with md RAID? Correct me if I'm wrong, io-schedular <--> md driver <--> harddisks.
Regards,
Kyle
Quoted 2 lines · Kyle Wong
1. Is anticipatory io scheduler + echo 0 >
/sys/block/hd*/queue/iosched/antic_expire= deadline scheduler?
It isn't 100% the same, but very very close.
Quoted 2 lines
2. Does io scheduler works with md RAID? Correct me if I'm wrong, io-schedular <--> md driver <--> harddisks.
No, it's md -> io scheduler -> hard drive.
Signature · 1 line
Jens Axboe
Quoted 4 lines · Kyle Wong
1. Is anticipatory io scheduler + echo 0 >
/sys/block/hd*/queue/iosched/antic_expire= deadline scheduler?
It is very similar but not quite the same.
Quoted 4 lines
2. Does io scheduler works with md RAID? Correct me if I'm wrong, io-schedular <--> md driver <--> harddisks.
It goes md driver -> io schedulers -> hard disks.
Quoted 9 lines · Nick Piggin
Quoted 4 lines · Kyle Wong
2. Does io scheduler works with md RAID? Correct me if I'm wrong, io-schedular <--> md driver <--> harddisks.
It goes md driver -> io schedulers -> hard disks.
There is an IO scheduler per disk.
So MD submits the data to each disk through the IO scheduler.
This allows you to have the heads on each disk in the array at different locations, and helps keep response times lower for seeky loads.
Quoted 11 lines · Mike Fedyk
Quoted 9 lines · Nick Piggin
Quoted 4 lines · Kyle Wong
2. Does io scheduler works with md RAID? Correct me if I'm wrong, io-schedular <--> md driver <--> harddisks.
Quoted 8 lines
Quoted 1 line
It goes md driver -> io schedulers -> hard disks.
There is an IO scheduler per disk.
So MD submits the data to each disk through the IO scheduler.
This allows you to have the heads on each disk in the array at different locations, and helps keep response times lower for seeky loads.
Say you've got a RAID1. In this case, MD could send the read request to either device. How does it decide which one to use?
Quoted 19 lines · Timothy Miller
Quoted 15 lines · Mike Fedyk
Quoted 10 lines · Nick Piggin
Quoted 4 lines · Kyle Wong
2. Does io scheduler works with md RAID? Correct me if I'm wrong, io-schedular <--> md driver <--> harddisks.
It goes md driver -> io schedulers -> hard disks.
Quoted 8 lines
Quoted 5 lines
There is an IO scheduler per disk.
So MD submits the data to each disk through the IO scheduler.
This allows you to have the heads on each disk in the array at different locations, and helps keep response times lower for seeky loads.
Say you've got a RAID1. In this case, MD could send the read request to either device. How does it decide which one to use?
The one with the drive head closest to the data.