update-rc.d: support enable/disable function
PATCH 1/1 update-rc.d: support enable/disable function
From: Changqing Li <[email protected]>
Add support of enable/disable function, so that user can keep previous config after upgrade package
--- update-rc.d | 70 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+)
update-rc.d +70 -0
@@ -27,6 +27,7 @@ usage() usage: update-rc.d [-n] [-f] [-r <root>] <basename> remove update-rc.d [-n] [-r <root>] [-s] <basename> defaults [NN | sNN kNN] update-rc.d [-n] [-r <root>] [-s] <basename> start|stop NN runlvl [runlvl] [...] . + update-rc.d [-n] [-r <root>] [-s] <basename> enable|disable [S|2|3|4|5] -n: not really -f: force -v: verbose
@@ -101,6 +102,43 @@ makelinks() done } +renamelink() +{ + local oldstartstop newstartstop lev oldnn newnn + if [ "x$1" = "xS" ]; then + oldstartstop="K" + newstartstop="S" + else + oldstartstop="S" + newstartstop="K" + fi + + lev=$2 + if ls ${etcd}${lev}.d/${oldstartstop}*${bn} >/dev/null 2>&1; then + oldnn=`basename ${etcd}${lev}.d/${oldstartstop}*${bn}|cut -c2-3` + newnn=$[100-$oldnn] + [ $verbose -eq 1 ] && echo "rename ${etcd}${lev}.d/${oldstartstop}${oldnn}${bn} -> ${etcd}${lev}.d/${newstartstop}${newnn}${bn}" + if [ $notreally -eq 0 ];then + mv ${etcd}${lev}.d/${oldstartstop}${oldnn}${bn} ${etcd}${lev}.d/${newstartstop}${newnn}${bn} + fi + if [ $dostart -eq 1 ] && [ $newstartstop = "S" ] && [ $lev = $RUNLEVEL ]; then + $fn start || true + fi + fi + +} + +renamelinks() +{ + if [ $# -eq 2 ]; then + renamelink $1 $2 + else + for i in 2 3 4 5 S; do + renamelink $1 $i + done + fi +} + while [ $# -gt 0 ]; do case $1 in -n) notreally=1
@@ -221,6 +259,13 @@ case $1 in ;; start | stop) + if [ $# -lt 4 ] + then + echo "Not enough arguments" + usage + exit 1 + fi + while [ $# -gt 0 ]; do if [ $1 = "start" ]; then letter=S
@@ -251,6 +296,31 @@ case $1 in makelinks ;; + enable | disable) + if [ $1 = "enable" ]; then + letter=S + elif [ $1 = "disable" ]; then + letter=K + else + usage + exit 1 + fi + shift + if [ $# -gt 0 ] + then + case $1 in + S|2|3|4|5) + renamelinks $letter $1 + ;; + *) + usage + exit 1 + ;; + esac + else + renamelinks $letter + fi + ;; *) usage exit 1
Signature · 1 line
2.7.4
PATCH 1/1 ref-variables.xml: update manual page for update-rc.d
From: Changqing Li <[email protected]>
Currently, yocto doc refer link http://www.tin.org/bin/man.cgi?
section=8&topic=update-rc.d. as man page of update-rc.d, but lastest debian udpate-rc.d have big difference with ours, they need insserv and all the initscripts support LSB comment header.
change to new link which is more similar to ours.
--- documentation/ref-manual/ref-variables.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
documentation/ref-manual/ref-variables.xml +1 -1
@@ -7116,7 +7116,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3" to the <filename>update-rc.d</filename> command. For more information on valid parameters, please see the <filename>update-rc.d</filename> manual page at - <ulink url='http://www.tin.org/bin/man.cgi?section=8&topic=update-rc.d'></ulink>. + <ulink url='https://manpages.debian.org/wheezy/sysv-rc/update-rc.d.8.en.html'></ulink>. </para> </glossdef> </glossentry>
Signature · 1 line
2.7.4
Ping
Quoted 112 lines · On 11/9/18 5:44 PM, [email protected] wrote:
From: Changqing Li <[email protected]>
Add support of enable/disable function, so that user can keep previous config after upgrade package
Signed-off-by Changqing Li <[email protected]>--- update-rc.d | 70 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+)update-rc.d +70
-0@@ -27,6 +27,7 @@ usage() usage: update-rc.d [-n] [-f] [-r <root>] <basename> remove update-rc.d [-n] [-r <root>] [-s] <basename> defaults [NN | sNN kNN] update-rc.d [-n] [-r <root>] [-s] <basename> start|stop NN runlvl [runlvl] [...] . + update-rc.d [-n] [-r <root>] [-s] <basename> enable|disable [S|2|3|4|5] -n: not really -f: force -v: verbose@@ -101,6 +102,43 @@ makelinks() done } +renamelink() +{ + local oldstartstop newstartstop lev oldnn newnn + if [ "x$1" = "xS" ]; then + oldstartstop="K" + newstartstop="S" + else + oldstartstop="S" + newstartstop="K" + fi + + lev=$2 + if ls ${etcd}${lev}.d/${oldstartstop}*${bn} >/dev/null 2>&1; then + oldnn=`basename ${etcd}${lev}.d/${oldstartstop}*${bn}|cut -c2-3` + newnn=$[100-$oldnn] + [ $verbose -eq 1 ] && echo "rename ${etcd}${lev}.d/${oldstartstop}${oldnn}${bn} -> ${etcd}${lev}.d/${newstartstop}${newnn}${bn}" + if [ $notreally -eq 0 ];then + mv ${etcd}${lev}.d/${oldstartstop}${oldnn}${bn} ${etcd}${lev}.d/${newstartstop}${newnn}${bn} + fi + if [ $dostart -eq 1 ] && [ $newstartstop = "S" ] && [ $lev = $RUNLEVEL ]; then + $fn start || true + fi + fi + +} + +renamelinks() +{ + if [ $# -eq 2 ]; then + renamelink $1 $2 + else + for i in 2 3 4 5 S; do + renamelink $1 $i + done + fi +} + while [ $# -gt 0 ]; do case $1 in -n) notreally=1@@ -221,6 +259,13 @@ case $1 in ;; start | stop) + if [ $# -lt 4 ] + then + echo "Not enough arguments" + usage + exit 1 + fi + while [ $# -gt 0 ]; do if [ $1 = "start" ]; then letter=S@@ -251,6 +296,31 @@ case $1 in makelinks ;; + enable | disable) + if [ $1 = "enable" ]; then + letter=S + elif [ $1 = "disable" ]; then + letter=K + else + usage + exit 1 + fi + shift + if [ $# -gt 0 ] + then + case $1 in + S|2|3|4|5) + renamelinks $letter $1 + ;; + *) + usage + exit 1 + ;; + esac + else + renamelinks $letter + fi + ;; *) usage exit 1
Signature · 3 lines
BRs Sandy(Li Changqing)
ping
Quoted 119 lines · Changqing Li
Ping
Quoted 115 lines · On 11/9/18 5:44 PM, [email protected] wrote:
From: Changqing Li <[email protected]>
Add support of enable/disable function, so that user can keep previous config after upgrade package
Signed-off-by Changqing Li <[email protected]>---
update-rc.d | 70
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++1 file changed, 70 insertions(+)update-rc.d +0
-0@@ -27,6 +27,7 @@ usage()usage: update-rc.d [-n] [-f] [-r <root>] <basename> remove
update-rc.d [-n] [-r <root>] [-s] <basename> defaults [NN | sNN kNN] update-rc.d [-n] [-r <root>] [-s] <basename> start|stop NN runlvl [runlvl] [...] . + update-rc.d [-n] [-r <root>] [-s] <basename> enable|disable [S|2|3|4|5]
-n: not really
-f: force
-v: verboseupdate-rc.d +0
-0@@ -101,6 +102,43 @@ makelinks()done
}
+renamelink()update-rc.d +15
-1+{ + local oldstartstop newstartstop lev oldnn newnn + if [ "x$1" = "xS" ]; then + oldstartstop="K" + newstartstop="S" + else + oldstartstop="S" + newstartstop="K" + fi + + lev=$2 + if ls ${etcd}${lev}.d/${oldstartstop}*${bn} >/dev/null 2>&1; then + oldnn=`basename ${etcd}${lev}.d/${oldstartstop}*${bn}|cut -c2-3` + newnn=$[100-$oldnn] + [ $verbose -eq 1 ] && echo "rename${etcd}${lev}.d/${oldstartstop}${oldnn}${bn} -> ${etcd}${lev}.d/${newstartstop}${newnn}${bn}" + if [ $notreally -eq 0 ];then
+ mv ${etcd}${lev}.d/${oldstartstop}${oldnn}${bn} ${etcd}${lev}.d/${newstartstop}${newnn}${bn}
+ fi
+ if [ $dostart -eq 1 ] && [ $newstartstop = "S" ] && [ $lev = $RUNLEVEL ]; then
+ $fn start || true
+ fi
+ fiupdate-rc.d +14
-0+ +} + +renamelinks() +{ + if [ $# -eq 2 ]; then + renamelink $1 $2 + else + for i in 2 3 4 5 S; do + renamelink $1 $i + done + fi +} +while [ $# -gt 0 ]; do
case $1 in
-n) notreally=1update-rc.d +7
-0@@ -221,6 +259,13 @@ case $1 in ;; start | stop) + if [ $# -lt 4 ] + then + echo "Not enough arguments" + usage + exit 1 + fi +while [ $# -gt 0 ]; do
if [ $1 = "start" ]; then
letter=Supdate-rc.d +0
-0@@ -251,6 +296,31 @@ case $1 inmakelinks
;;
+ enable | disable)
+ if [ $1 = "enable" ]; then
+ letter=S
+ elif [ $1 = "disable" ]; then
+ letter=K
+ else
+ usage
+ exit 1
+ fi
+ shift
+ if [ $# -gt 0 ]
+ then
+ case $1 in
+ S|2|3|4|5)
+ renamelinks $letter $1
+ ;;
+ *)
+ usage
+ exit 1
+ ;;
+ esac
+ else
+ renamelinks $letter
+ fi
+ ;;
*)
usage
exit 1
Signature · 3 lines
BRs Sandy(Li Changqing)
Ping
Quoted 122 lines · Changqing Li
ping
Quoted 119 lines · Changqing Li
Ping
Quoted 115 lines · On 11/9/18 5:44 PM, [email protected] wrote:
From: Changqing Li <[email protected]>
Add support of enable/disable function, so that user can keep previous config after upgrade package
Signed-off-by Changqing Li <[email protected]>---
update-rc.d | 70
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++1 file changed, 70 insertions(+)update-rc.d +0
-0@@ -27,6 +27,7 @@ usage()usage: update-rc.d [-n] [-f] [-r <root>] <basename> remove
update-rc.d [-n] [-r <root>] [-s] <basename> defaults [NN | sNN kNN] update-rc.d [-n] [-r <root>] [-s] <basename> start|stop NN runlvl [runlvl] [...] . + update-rc.d [-n] [-r <root>] [-s] <basename> enable|disable [S|2|3|4|5]
-n: not really
-f: force
-v: verboseupdate-rc.d +0
-0@@ -101,6 +102,43 @@ makelinks()done
}
+renamelink()update-rc.d +15
-1+{ + local oldstartstop newstartstop lev oldnn newnn + if [ "x$1" = "xS" ]; then + oldstartstop="K" + newstartstop="S" + else + oldstartstop="S" + newstartstop="K" + fi + + lev=$2 + if ls ${etcd}${lev}.d/${oldstartstop}*${bn} >/dev/null 2>&1; then + oldnn=`basename ${etcd}${lev}.d/${oldstartstop}*${bn}|cut -c2-3` + newnn=$[100-$oldnn] + [ $verbose -eq 1 ] && echo "rename${etcd}${lev}.d/${oldstartstop}${oldnn}${bn} -> ${etcd}${lev}.d/${newstartstop}${newnn}${bn}" + if [ $notreally -eq 0 ];then
+ mv ${etcd}${lev}.d/${oldstartstop}${oldnn}${bn} ${etcd}${lev}.d/${newstartstop}${newnn}${bn}
+ fi
+ if [ $dostart -eq 1 ] && [ $newstartstop = "S" ] && [ $lev
= $RUNLEVEL ]; then
+ $fn start || true
+ fi
+ fiupdate-rc.d +14
-0+ +} + +renamelinks() +{ + if [ $# -eq 2 ]; then + renamelink $1 $2 + else + for i in 2 3 4 5 S; do + renamelink $1 $i + done + fi +} +while [ $# -gt 0 ]; do
case $1 in
-n) notreally=1update-rc.d +7
-0@@ -221,6 +259,13 @@ case $1 in ;; start | stop) + if [ $# -lt 4 ] + then + echo "Not enough arguments" + usage + exit 1 + fi +while [ $# -gt 0 ]; do
if [ $1 = "start" ]; then
letter=Supdate-rc.d +0
-0@@ -251,6 +296,31 @@ case $1 inmakelinks
;;
+ enable | disable)
+ if [ $1 = "enable" ]; then
+ letter=S
+ elif [ $1 = "disable" ]; then
+ letter=K
+ else
+ usage
+ exit 1
+ fi
+ shift
+ if [ $# -gt 0 ]
+ then
+ case $1 in
+ S|2|3|4|5)
+ renamelinks $letter $1
+ ;;
+ *)
+ usage
+ exit 1
+ ;;
+ esac
+ else
+ renamelinks $letter
+ fi
+ ;;
*)
usage
exit 1
Signature · 3 lines
BRs Sandy(Li Changqing)