Skip to contentSkip to conversation

Add SDM670 camera subsystem

PATCH Applied Richard Acayan 4 participants 15 messages Oct 1, 2024 – Oct 2, 2024

Subsystems (10)

v5 of 10 Applied Latest is v10 →

lore
Share & tools
lore
#0 lore raw

v5 cover Add SDM670 camera subsystem

This adds support for the camera subsystem on the Snapdragon 670.

As of next-20240930, the bugs with camss have been resolved. The dt-bindings were tested on v6.10 with:

make O=.output ARCH=arm64 dt_binding_check DT_SCHEMA_FILES=clock/qcom,sdm845-camcc.yaml make O=.output ARCH=arm64 dt_binding_check DT_SCHEMA_FILES=i2c/qcom,i2c-cci.yaml make O=.output ARCH=arm64 dt_binding_check DT_SCHEMA_FILES=media/qcom,sdm670-camss.yaml

Changes since v4 ([email protected]):
- change camss interrupts to rising edge in dts (7/7)
- change IRQs to rising edge in camss dt-bindings example (4/7)
- move gcc and ahb clocks in camss dt-bindings example (4/7)
- add reviewed-by for camcc dt-bindings patch (1/7)

Changes since v3 ([email protected]):
- add specific sdm670 compatible for camcc to dt schema and dts (1/7, 6/7)
- pick up patch from Bryan for CCI driver (3/7)
- stop assigning CCI frequency in dts (7/7)
- add maxItems for sdm670 cci clocks (2/7)
- remove empty line at top of camss dt schema (4/7)
- move regs and reg-names up in camss dt schema (4/7)
- move gcc and ahb clocks up in dts and dt schema (4/7, 7/7)
- add reviewed-by from Vladimir for CCI dt-bindings patch (2/7)
- add reviewed-by from Bryan for dts patch (7/7)
- add reviewed-by from Krzysztof for camss dt-bindings patch (4/7)
- add rewiew tags for camss driver patch (5/7)

Changes since v2 ([email protected]):
- drop unnecessary assigned AXI clock frequency (5/5)
- drop src clocks from cci (5/5)
- add unit name, remove mmio properties from port in example dts (2/5)
- correct the reg-names order (2/5)
- add parent_dev_ops to csid (3/5)
- remove CSID clocks from VFE (3/5)
- remove AXI clock from CSIPHY (3/5)
- change subsystem part of the commit message summary (3/5)
- add reviewed-by (4/5)

Changes since v1 ([email protected]):
- define dedicated resource structs/arrays for sdm670 (3/5)
- separate camcc device tree node into its own patch (4/5)
- specify correct dual license (2/5)
- add include directives in dt-bindings camss example (2/5)
- remove src clocks from dt-bindings (2/5)
- remove src clocks from dtsi (5/5)
- add power-domain-names to camss (5/5)
- specify power domain names (3/5)
- restrict cci-i2c clocks (1/5)
- populate a commit message with hw info (2/5)
- reword commit message (3/5)

Bryan O'Donoghue (1):
i2c: qcom-cci: Stop complaining about DT set clock rate

Richard Acayan (6):
dt-bindings: clock: qcom,sdm845-camcc: add sdm670 compatible
dt-bindings: i2c: qcom-cci: Document SDM670 compatible
dt-bindings: media: camss: Add qcom,sdm670-camss
media: qcom: camss: add support for SDM670 camss
arm64: dts: qcom: sdm670: add camcc
arm64: dts: qcom: sdm670: add camss and cci

 .../bindings/clock/qcom,sdm845-camcc.yaml     |   6 +-
 .../devicetree/bindings/i2c/qcom,i2c-cci.yaml |  19 ++
 .../bindings/media/qcom,sdm670-camss.yaml     | 318 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sdm670.dtsi          | 195 +++++++++++
 drivers/i2c/busses/i2c-qcom-cci.c             |   8 -
 drivers/media/platform/qcom/camss/camss.c     | 191 +++++++++++
 6 files changed, 728 insertions(+), 9 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
Signature · 1 line
2.46.2
#1 lore raw

PATCH v5 1/7 dt-bindings: clock: qcom,sdm845-camcc: add sdm670 compatible

The camera clocks on SDM670 and SDM845 have no significant differences that would require a change in the clock controller driver. The only difference is the clock frequency at each level of the power domains, which is not specified in the clock driver. There should still be a compatible specific to the SoC, so add the compatible for SDM670 with the SDM845 compatible as fallback.

---
 .../devicetree/bindings/clock/qcom,sdm845-camcc.yaml        | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml +5 -1
index 810b852ae371..fa95c3a1ba3a 100644
@@ -20,7 +20,11 @@ allOf:
 
 properties:
   compatible:
-    const: qcom,sdm845-camcc
+    oneOf:
+      - items:
+          - const: qcom,sdm670-camcc
+          - const: qcom,sdm845-camcc
+      - const: qcom,sdm845-camcc
 
   clocks:
     items:
Signature · 1 line
2.46.2
#2 lore raw

PATCH v5 2/7 dt-bindings: i2c: qcom-cci: Document SDM670 compatible

In reply to Richard Acayan

The CCI on the Snapdragon 670 is the interface for controlling camera hardware over I2C. Add the compatible so it can be added to the SDM670 device tree.

---
 .../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml +19 -0
index 7dab3852c7f8..ef26ba6eda28 100644
@@ -27,6 +27,7 @@ properties:
           - enum:
               - qcom,sc7280-cci
               - qcom,sc8280xp-cci
+              - qcom,sdm670-cci
               - qcom,sdm845-cci
               - qcom,sm6350-cci
               - qcom,sm8250-cci
@@ -139,6 +140,24 @@ allOf:
             - const: cci
             - const: camss_ahb
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm670-cci
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: soc_ahb
+            - const: cpas_ahb
+            - const: cci
+
   - if:
       properties:
         compatible:
Signature · 1 line
2.46.2
Reviewed-by on v5 2/7
#3 lore raw

Re: [PATCH v5 2/7] dt-bindings: i2c: qcom-cci: Document SDM670 compatible

Quoted 9 lines · Richard Acayan

The CCI on the Snapdragon 670 is the interface for controlling camera hardware over I2C. Add the compatible so it can be added to the SDM670 device tree.

---
 .../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

Best regards,
Krzysztof

#4 lore raw

PATCH v5 3/7 i2c: qcom-cci: Stop complaining about DT set clock rate

In reply to Richard Acayan

From: Bryan O'Donoghue <[email protected]>

It is common practice in the downstream and upstream CCI dt to set CCI clock rates to 19.2 MHz. It appears to be fairly common for initial code to set the CCI clock rate to 37.5 MHz.

Applying the widely used CCI clock rates from downstream ought not to cause warning messages in the upstream kernel where our general policy is to usually copy downstream hardware clock rates across the range of Qualcomm drivers.

Drop the warning it is pervasive across CAMSS users but doesn't add any information or warrant any changes to the DT to align the DT clock rate to the bootloader clock rate.

---
 drivers/i2c/busses/i2c-qcom-cci.c | 8 --------
 1 file changed, 8 deletions(-)
drivers/i2c/busses/i2c-qcom-cci.c +0 -8
index 414882c57d7f..99e4305a3373 100644
@@ -602,14 +602,6 @@ static int cci_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (cci_clk_rate != cci->data->cci_clk_rate) {
-		/* cci clock set by the bootloader or via assigned clock rate
-		 * in DT.
-		 */
-		dev_warn(dev, "Found %lu cci clk rate while %lu was expected\n",
-			 cci_clk_rate, cci->data->cci_clk_rate);
-	}
-
 	ret = cci_enable_clocks(cci);
 	if (ret < 0)
 		return ret;
Signature · 1 line
2.46.2
#5 lore raw

PATCH v5 4/7 dt-bindings: media: camss: Add qcom,sdm670-camss

In reply to Richard Acayan

As found in the Pixel 3a, the Snapdragon 670 has a camera subsystem with 3 CSIDs and 3 VFEs (including 1 VFE lite). Add this camera subsystem to the bindings.

Adapted from SC8280XP camera subsystem.

---
 .../bindings/media/qcom,sdm670-camss.yaml     | 318 ++++++++++++++++++
 1 file changed, 318 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml new file +318 -0
new file mode 100644
index 000000000000..06662460a25c
@@ -0,0 +1,318 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM670 Camera Subsystem (CAMSS)
+
+maintainers:
+  - Richard Acayan <[email protected]>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,sdm670-camss
+
+  reg:
+    maxItems: 9
+
+  reg-names:
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: vfe0
+      - const: csid0
+      - const: vfe1
+      - const: csid1
+      - const: vfe_lite
+      - const: csid2
+
+  clocks:
+    maxItems: 22
+
+  clock-names:
+    items:
+      - const: gcc_camera_ahb
+      - const: gcc_camera_axi
+      - const: soc_ahb
+      - const: camnoc_axi
+      - const: cpas_ahb
+      - const: csi0
+      - const: csi1
+      - const: csi2
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: vfe0_axi
+      - const: vfe0
+      - const: vfe0_cphy_rx
+      - const: vfe1_axi
+      - const: vfe1
+      - const: vfe1_cphy_rx
+      - const: vfe_lite
+      - const: vfe_lite_cphy_rx
+
+  interrupts:
+    maxItems: 9
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite
+
+  iommus:
+    maxItems: 4
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  power-domain-names:
+    items:
+      - const: ife0
+      - const: ife1
+      - const: top
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data from CSIPHY0.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data from CSIPHY1.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data from CSIPHY2.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+required:
+  - reg
+  - reg-names
+  - clock-names
+  - clocks
+  - compatible
+  - interrupts
+  - interrupt-names
+  - iommus
+  - power-domains
+  - power-domain-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,camcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        camss@ac65000 {
+            compatible = "qcom,sdm670-camss";
+
+            reg = <0 0x0ac65000 0 0x1000>,
+                  <0 0x0ac66000 0 0x1000>,
+                  <0 0x0ac67000 0 0x1000>,
+                  <0 0x0acaf000 0 0x4000>,
+                  <0 0x0acb3000 0 0x1000>,
+                  <0 0x0acb6000 0 0x4000>,
+                  <0 0x0acba000 0 0x1000>,
+                  <0 0x0acc4000 0 0x4000>,
+                  <0 0x0acc8000 0 0x1000>;
+            reg-names = "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "vfe0",
+                        "csid0",
+                        "vfe1",
+                        "csid1",
+                        "vfe_lite",
+                        "csid2";
+
+            interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "csid0",
+                              "csid1",
+                              "csid2",
+                              "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "vfe0",
+                              "vfe1",
+                              "vfe_lite";
+
+            clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+                     <&gcc GCC_CAMERA_AXI_CLK>,
+                     <&camcc CAM_CC_SOC_AHB_CLK>,
+                     <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                     <&camcc CAM_CC_CPAS_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_0_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_1_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CSID_CLK>,
+                     <&camcc CAM_CC_CSIPHY0_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY1_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY2_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+                     <&camcc CAM_CC_IFE_0_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK>,
+                     <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_1_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK>,
+                     <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>;
+            clock-names = "gcc_camera_ahb",
+                          "gcc_camera_axi",
+                          "soc_ahb",
+                          "camnoc_axi",
+                          "cpas_ahb",
+                          "csi0",
+                          "csi1",
+                          "csi2",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "vfe0_axi",
+                          "vfe0",
+                          "vfe0_cphy_rx",
+                          "vfe1_axi",
+                          "vfe1",
+                          "vfe1_cphy_rx",
+                          "vfe_lite",
+                          "vfe_lite_cphy_rx";
+
+            iommus = <&apps_smmu 0x808 0x0>,
+                     <&apps_smmu 0x810 0x8>,
+                     <&apps_smmu 0xc08 0x0>,
+                     <&apps_smmu 0xc10 0x8>;
+
+            power-domains = <&camcc IFE_0_GDSC>,
+                            <&camcc IFE_1_GDSC>,
+                            <&camcc TITAN_TOP_GDSC>;
+            power-domain-names = "ife0",
+                                 "ife1",
+                                 "top";
+
+            vdda-phy-supply = <&vreg_l1a_1p225>;
+            vdda-pll-supply = <&vreg_l8a_1p8>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    csiphy_ep0: endpoint {
+                        clock-lanes = <7>;
+                        data-lanes = <0 1 2 3>;
+                        remote-endpoint = <&front_sensor_ep>;
+                    };
+                };
+            };
+        };
+    };
Signature · 1 line
2.46.2
#6 lore raw

Re: [PATCH v5 4/7] dt-bindings: media: camss: Add qcom,sdm670-camss

Quoted 40 lines · Richard Acayan

As found in the Pixel 3a, the Snapdragon 670 has a camera subsystem with 3 CSIDs and 3 VFEs (including 1 VFE lite). Add this camera subsystem to the bindings.

Adapted from SC8280XP camera subsystem.

---
 .../bindings/media/qcom,sdm670-camss.yaml     | 318 ++++++++++++++++++
 1 file changed, 318 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml new file +22 -0
new file mode 100644
index 000000000000..06662460a25c
@@ -0,0 +1,318 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM670 Camera Subsystem (CAMSS)
+
+maintainers:
+  - Richard Acayan <[email protected]>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,sdm670-camss
+
+  reg:
+    maxItems: 9
+
+  reg-names:

Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml line 32

Quoted 10 lines
Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml new file +10 -0
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: vfe0
+      - const: csid0
+      - const: vfe1
+      - const: csid1
+      - const: vfe_lite
+      - const: csid2

Why this order is so different than all others? This is supposed to match other devices. Look at sdm845 for example.

Quoted 18 lines
Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml new file +18 -0
+
+  clocks:
+    maxItems: 22
+
+  clock-names:
+    items:
+      - const: gcc_camera_ahb
+      - const: gcc_camera_axi
+      - const: soc_ahb
+      - const: camnoc_axi
+      - const: cpas_ahb
+      - const: csi0
+      - const: csi1
+      - const: csi2
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer

Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml line 60

Quoted 10 lines
Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml new file +10 -0
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: vfe0_axi
+      - const: vfe0
+      - const: vfe0_cphy_rx
+      - const: vfe1_axi
+      - const: vfe1
+      - const: vfe1_cphy_rx
+      - const: vfe_lite
+      - const: vfe_lite_cphy_rx

Same comment.

Quoted 5 lines
Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml new file +5 -0
+
+  interrupts:
+    maxItems: 9
+
+  interrupt-names:

Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml line 75

Quoted 10 lines
Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml new file +10 -0
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite

This one is ok.

Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml line 77

Quoted 2 lines
Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml new file +2 -0
+
+  iommus:

Best regards,
Krzysztof

maintainer
#7 lore raw

Re: [PATCH v5 4/7] dt-bindings: media: camss: Add qcom,sdm670-camss

Quoted 11 lines · Krzysztof Kozlowski

Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml line 32

Quoted 11 lines
Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml new file +11 -0
+  reg-names:
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: vfe0
+      - const: csid0
+      - const: vfe1
+      - const: csid1
+      - const: vfe_lite
+      - const: csid2
Quoted 2 lines

Why this order is so different than all others? This is supposed to match other devices. Look at sdm845 for example.

These are appearing in address order, which is preferred over reg-name ordering AFAIU.

+ reg = <0 0x0ac65000 0 0x1000>,

+                  <0 0x0ac66000 0 0x1000>,
+                  <0 0x0ac67000 0 0x1000>,
+                  <0 0x0acaf000 0 0x4000>,
+                  <0 0x0acb3000 0 0x1000>,
+                  <0 0x0acb6000 0 0x4000>,
+                  <0 0x0acba000 0 0x1000>,
+                  <0 0x0acc4000 0 0x4000>,
+                  <0 0x0acc8000 0 0x1000>;
+            reg-names = "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "vfe0",
+                        "csid0",
+                        "vfe1",
+                        "csid1",
+                        "vfe_lite",
+                        "csid2";

---
bod

#8 lore raw

Re: [PATCH v5 4/7] dt-bindings: media: camss: Add qcom,sdm670-camss

Quoted 12 lines · Bryan O'Donoghue
Quoted 11 lines · Krzysztof Kozlowski
Quoted 11 lines
Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml new file +11 -0
+  reg-names:
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: vfe0
+      - const: csid0
+      - const: vfe1
+      - const: csid1
+      - const: vfe_lite
+      - const: csid2
Quoted 5 lines
Quoted 2 lines

Why this order is so different than all others? This is supposed to match other devices. Look at sdm845 for example.

These are appearing in address order, which is preferred over reg-name ordering AFAIU.

First time I hear about such rule. Where is this ordering preference documented? We always ask to keep the same order in each file.

Best regards,
Krzysztof

maintainer
#9 lore raw

Re: [PATCH v5 4/7] dt-bindings: media: camss: Add qcom,sdm670-camss

Quoted 4 lines · Krzysztof Kozlowski
Quoted 2 lines

These are appearing in address order, which is preferred over reg-name ordering AFAIU.

First time I hear about such rule. Where is this ordering preference documented? We always ask to keep the same order in each file.

Eh evidently just my impression because we sort nodes by address.

Yes, definitely agree both the regs and interrupts should be sorted the same way, its inconsistent to have one set sorted by address but the other sorted by name.

---
bod

#10 lore raw

Re: [PATCH v5 4/7] dt-bindings: media: camss: Add qcom,sdm670-camss

Quoted 11 lines · Bryan O'Donoghue
Quoted 4 lines · Krzysztof Kozlowski
Quoted 2 lines

These are appearing in address order, which is preferred over reg-name ordering AFAIU.

First time I hear about such rule. Where is this ordering preference documented? We always ask to keep the same order in each file.

Eh evidently just my impression because we sort nodes by address.

Yes, definitely agree both the regs and interrupts should be sorted the same way, its inconsistent to have one set sorted by address but the other sorted by name.

I don't imply sorting by name is any better. The only rule is that all devices from same family type must have the same order. This is even explicitly expressed for several devices by sharing binding or sharing bindings.

Best regards,
Krzysztof

#11 lore raw

PATCH v5 5/7 media: qcom: camss: add support for SDM670 camss

In reply to Richard Acayan

The camera subsystem for the SDM670 the same as on SDM845 except with 3 CSIPHY ports instead of 4. Add support for the SDM670 camera subsystem.

---
 drivers/media/platform/qcom/camss/camss.c | 191 ++++++++++++++++++++++
 1 file changed, 191 insertions(+)
drivers/media/platform/qcom/camss/camss.c +191 -0
index d64985ca6e88..4694f5219654 100644
@@ -584,6 +584,185 @@ static const struct camss_subdev_resources vfe_res_660[] = {
 	}
 };
 
+static const struct camss_subdev_resources csiphy_res_670[] = {
+	/* CSIPHY0 */
+	{
+		.regulators = {},
+		.clock = { "soc_ahb", "cpas_ahb",
+				"csiphy0", "csiphy0_timer" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 0 },
+				{ 19200000, 240000000, 269333333 } },
+		.reg = { "csiphy0" },
+		.interrupt = { "csiphy0" },
+		.csiphy = {
+			.hw_ops = &csiphy_ops_3ph_1_0,
+			.formats = &csiphy_formats_sdm845
+		}
+	},
+
+	/* CSIPHY1 */
+	{
+		.regulators = {},
+		.clock = { "soc_ahb", "cpas_ahb",
+				"csiphy1", "csiphy1_timer" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 0 },
+				{ 19200000, 240000000, 269333333 } },
+		.reg = { "csiphy1" },
+		.interrupt = { "csiphy1" },
+		.csiphy = {
+			.hw_ops = &csiphy_ops_3ph_1_0,
+			.formats = &csiphy_formats_sdm845
+		}
+	},
+
+	/* CSIPHY2 */
+	{
+		.regulators = {},
+		.clock = { "soc_ahb", "cpas_ahb",
+				"csiphy2", "csiphy2_timer" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 0 },
+				{ 19200000, 240000000, 269333333 } },
+		.reg = { "csiphy2" },
+		.interrupt = { "csiphy2" },
+		.csiphy = {
+			.hw_ops = &csiphy_ops_3ph_1_0,
+			.formats = &csiphy_formats_sdm845
+		}
+	}
+};
+
+static const struct camss_subdev_resources csid_res_670[] = {
+	/* CSID0 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "cpas_ahb", "soc_ahb", "vfe0",
+				"vfe0_cphy_rx", "csi0" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 100000000, 320000000, 404000000, 480000000, 600000000 },
+				{ 384000000 },
+				{ 19200000, 75000000, 384000000, 538666667 } },
+		.reg = { "csid0" },
+		.interrupt = { "csid0" },
+		.csid = {
+			.hw_ops = &csid_ops_gen2,
+			.parent_dev_ops = &vfe_parent_dev_ops,
+			.formats = &csid_formats_gen2
+		}
+	},
+
+	/* CSID1 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "cpas_ahb", "soc_ahb", "vfe1",
+				"vfe1_cphy_rx", "csi1" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 100000000, 320000000, 404000000, 480000000, 600000000 },
+				{ 384000000 },
+				{ 19200000, 75000000, 384000000, 538666667 } },
+		.reg = { "csid1" },
+		.interrupt = { "csid1" },
+		.csid = {
+			.hw_ops = &csid_ops_gen2,
+			.parent_dev_ops = &vfe_parent_dev_ops,
+			.formats = &csid_formats_gen2
+		}
+	},
+
+	/* CSID2 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "cpas_ahb", "soc_ahb", "vfe_lite",
+				"vfe_lite_cphy_rx", "csi2" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 100000000, 320000000, 404000000, 480000000, 600000000 },
+				{ 384000000 },
+				{ 19200000, 75000000, 384000000, 538666667 } },
+		.reg = { "csid2" },
+		.interrupt = { "csid2" },
+		.csid = {
+			.is_lite = true,
+			.hw_ops = &csid_ops_gen2,
+			.parent_dev_ops = &vfe_parent_dev_ops,
+			.formats = &csid_formats_gen2
+		}
+	}
+};
+
+static const struct camss_subdev_resources vfe_res_670[] = {
+	/* VFE0 */
+	{
+		.regulators = {},
+		.clock = { "camnoc_axi", "cpas_ahb", "soc_ahb",
+				"vfe0", "vfe0_axi" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 0 },
+				{ 100000000, 320000000, 404000000, 480000000, 600000000 },
+				{ 0 } },
+		.reg = { "vfe0" },
+		.interrupt = { "vfe0" },
+		.vfe = {
+			.line_num = 4,
+			.has_pd = true,
+			.pd_name = "ife0",
+			.hw_ops = &vfe_ops_170,
+			.formats_rdi = &vfe_formats_rdi_845,
+			.formats_pix = &vfe_formats_pix_845
+		}
+	},
+
+	/* VFE1 */
+	{
+		.regulators = {},
+		.clock = { "camnoc_axi", "cpas_ahb", "soc_ahb",
+				"vfe1", "vfe1_axi" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 0 },
+				{ 100000000, 320000000, 404000000, 480000000, 600000000 },
+				{ 0 } },
+		.reg = { "vfe1" },
+		.interrupt = { "vfe1" },
+		.vfe = {
+			.line_num = 4,
+			.has_pd = true,
+			.pd_name = "ife1",
+			.hw_ops = &vfe_ops_170,
+			.formats_rdi = &vfe_formats_rdi_845,
+			.formats_pix = &vfe_formats_pix_845
+		}
+	},
+
+	/* VFE-lite */
+	{
+		.regulators = {},
+		.clock = { "camnoc_axi", "cpas_ahb", "soc_ahb",
+				"vfe_lite" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 0 },
+				{ 100000000, 320000000, 404000000, 480000000, 600000000 } },
+		.reg = { "vfe_lite" },
+		.interrupt = { "vfe_lite" },
+		.vfe = {
+			.is_lite = true,
+			.line_num = 4,
+			.hw_ops = &vfe_ops_170,
+			.formats_rdi = &vfe_formats_rdi_845,
+			.formats_pix = &vfe_formats_pix_845
+		}
+	}
+};
+
 static const struct camss_subdev_resources csiphy_res_845[] = {
 	/* CSIPHY0 */
 	{
@@ -2404,6 +2583,17 @@ static const struct camss_resources sdm660_resources = {
 	.link_entities = camss_link_entities
 };
 
+static const struct camss_resources sdm670_resources = {
+	.version = CAMSS_845,
+	.csiphy_res = csiphy_res_670,
+	.csid_res = csid_res_670,
+	.vfe_res = vfe_res_670,
+	.csiphy_num = ARRAY_SIZE(csiphy_res_670),
+	.csid_num = ARRAY_SIZE(csid_res_670),
+	.vfe_num = ARRAY_SIZE(vfe_res_670),
+	.link_entities = camss_link_entities
+};
+
 static const struct camss_resources sdm845_resources = {
 	.version = CAMSS_845,
 	.csiphy_res = csiphy_res_845,
@@ -2448,6 +2638,7 @@ static const struct of_device_id camss_dt_match[] = {
 	{ .compatible = "qcom,msm8916-camss", .data = &msm8916_resources },
 	{ .compatible = "qcom,msm8996-camss", .data = &msm8996_resources },
 	{ .compatible = "qcom,sdm660-camss", .data = &sdm660_resources },
+	{ .compatible = "qcom,sdm670-camss", .data = &sdm670_resources },
 	{ .compatible = "qcom,sdm845-camss", .data = &sdm845_resources },
 	{ .compatible = "qcom,sm8250-camss", .data = &sm8250_resources },
 	{ .compatible = "qcom,sc8280xp-camss", .data = &sc8280xp_resources },
Signature · 1 line
2.46.2
#12 lore raw

PATCH v5 6/7 arm64: dts: qcom: sdm670: add camcc

In reply to Richard Acayan

The camera clock controller on SDM670 controls the clocks that drive the camera subsystem. The clocks are the same as on SDM845. Add the camera clock controller for SDM670.

---
 arch/arm64/boot/dts/qcom/sdm670.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)
arch/arm64/boot/dts/qcom/sdm670.dtsi +10 -0
index 187c6698835d..02f87200690a 100644
@@ -1400,6 +1400,16 @@ spmi_bus: spmi@c440000 {
 			#interrupt-cells = <4>;
 		};
 
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sdm670-camcc", "qcom,sdm845-camcc";
+			reg = <0 0x0ad00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		mdss: display-subsystem@ae00000 {
 			compatible = "qcom,sdm670-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
Signature · 1 line
2.46.2
#13 lore raw

PATCH v5 7/7 arm64: dts: qcom: sdm670: add camss and cci

In reply to Richard Acayan

Add the camera subsystem and CCI used to interface with cameras on the Snapdragon 670.

---
 arch/arm64/boot/dts/qcom/sdm670.dtsi | 185 +++++++++++++++++++++++++++
 1 file changed, 185 insertions(+)
arch/arm64/boot/dts/qcom/sdm670.dtsi +185 -0
index 02f87200690a..d1b84c9f7481 100644
@@ -6,6 +6,7 @@
  * Copyright (c) 2022, Richard Acayan. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,camcc-sdm845.h>
 #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
@@ -1168,6 +1169,34 @@ tlmm: pinctrl@3400000 {
 			gpio-ranges = <&tlmm 0 0 151>;
 			wakeup-parent = <&pdc>;
 
+			cci0_default: cci0-default-state {
+				pins = "gpio17", "gpio18";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				pins = "gpio17", "gpio18";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio19", "gpio20";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				pins = "gpio19", "gpio20";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			qup_i2c0_default: qup-i2c0-default-state {
 				pins = "gpio0", "gpio1";
 				function = "qup0";
@@ -1400,6 +1429,162 @@ spmi_bus: spmi@c440000 {
 			#interrupt-cells = <4>;
 		};
 
+		cci: cci@ac4a000 {
+			compatible = "qcom,sdm670-cci", "qcom,msm8996-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg = <0 0x0ac4a000 0 0x4000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SOC_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_CLK>;
+			clock-names = "camnoc_axi",
+				      "soc_ahb",
+				      "cpas_ahb",
+				      "cci";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		camss: camera-controller@ac65000 {
+			compatible = "qcom,sdm670-camss";
+			reg = <0 0x0ac65000 0 0x1000>,
+			      <0 0x0ac66000 0 0x1000>,
+			      <0 0x0ac67000 0 0x1000>,
+			      <0 0x0acaf000 0 0x4000>,
+			      <0 0x0acb3000 0 0x1000>,
+			      <0 0x0acb6000 0 0x4000>,
+			      <0 0x0acba000 0 0x1000>,
+			      <0 0x0acc4000 0 0x4000>,
+			      <0 0x0acc8000 0 0x1000>;
+			reg-names = "csiphy0",
+				    "csiphy1",
+				    "csiphy2",
+				    "vfe0",
+				    "csid0",
+				    "vfe1",
+				    "csid1",
+				    "vfe_lite",
+				    "csid2";
+
+			interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csid2",
+					  "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "vfe0",
+					  "vfe1",
+					  "vfe_lite";
+
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&gcc GCC_CAMERA_AXI_CLK>,
+				 <&camcc CAM_CC_SOC_AHB_CLK>,
+				 <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_0_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_1_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CSID_CLK>,
+				 <&camcc CAM_CC_CSIPHY0_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY1_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY2_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				 <&camcc CAM_CC_IFE_0_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_0_CLK>,
+				 <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_1_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_1_CLK>,
+				 <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>;
+			clock-names = "gcc_camera_ahb",
+				      "gcc_camera_axi",
+				      "soc_ahb",
+				      "camnoc_axi",
+				      "cpas_ahb",
+				      "csi0",
+				      "csi1",
+				      "csi2",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "csiphy2",
+				      "csiphy2_timer",
+				      "vfe0_axi",
+				      "vfe0",
+				      "vfe0_cphy_rx",
+				      "vfe1_axi",
+				      "vfe1",
+				      "vfe1_cphy_rx",
+				      "vfe_lite",
+				      "vfe_lite_cphy_rx";
+
+			iommus = <&apps_smmu 0x808 0x0>,
+				 <&apps_smmu 0x810 0x8>,
+				 <&apps_smmu 0xc08 0x0>,
+				 <&apps_smmu 0xc10 0x8>;
+
+			power-domains = <&camcc IFE_0_GDSC>,
+					<&camcc IFE_1_GDSC>,
+					<&camcc TITAN_TOP_GDSC>;
+			power-domain-names = "ife0",
+					     "ife1",
+					     "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				camss_port0: port@0 {
+					reg = <0>;
+				};
+
+				camss_port1: port@1 {
+					reg = <1>;
+				};
+
+				camss_port2: port@2 {
+					reg = <2>;
+				};
+			};
+		};
+
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sdm670-camcc", "qcom,sdm845-camcc";
 			reg = <0 0x0ad00000 0 0x10000>;
Signature · 1 line
2.46.2
maintainer Applied
#14 lore raw
In reply to Richard Acayan

Hi Richard,

Quoted 7 lines

Richard Acayan (6):
dt-bindings: clock: qcom,sdm845-camcc: add sdm670 compatible
dt-bindings: i2c: qcom-cci: Document SDM670 compatible
dt-bindings: media: camss: Add qcom,sdm670-camss
media: qcom: camss: add support for SDM670 camss
arm64: dts: qcom: sdm670: add camcc
arm64: dts: qcom: sdm670: add camss and cci

I think this list is taken from a different cover letter. In any case, I applied these two patches as they looked independent from the rest of the series:

[PATCH v5 2/7] dt-bindings: i2c: qcom-cci: Document SDM670 compatible [PATCH v5 3/7] i2c: qcom-cci: Stop complaining about DT set clock rate

I applied them to i2c/i2c-host.

Please let me know if I missed some dependency.

Thanks,
Andi