rockchip: theobroma: use HTTPS for git URLs and drop RK3368 Lion support
Subsystems (3)
cover rockchip: theobroma: use HTTPS for git URLs and drop RK3368 Lion support
Nobody at Theobroma has booted Lion since at least July 2021 and the last meaningful changes were made in February 2021.
The product isn't listed on our website anymore.
Therefore let's remove its support.
Additionally, migrate git URLs in MAINTAINERS to use https:// instead ofgit:// as it's more user-friendly (and also that git:// was only supported for Puma repo until yesterday).
---
Quentin Schulz (2):
rockchip: theobroma-systems: migrate git URLs to HTTPS
rockchip: remove support for Theobroma Systems RK3368 Lion
arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi | 119 -------- arch/arm/dts/rk3368-lion-haikou.dts | 144 ---------- arch/arm/dts/rk3368-lion.dtsi | 318 ---------------------- arch/arm/mach-rockchip/rk3368/Kconfig | 22 -- board/theobroma-systems/jaguar_rk3588/MAINTAINERS | 2 +- board/theobroma-systems/lion_rk3368/Kconfig | 18 -- board/theobroma-systems/lion_rk3368/MAINTAINERS | 10 - board/theobroma-systems/lion_rk3368/README | 78 ------ board/theobroma-systems/puma_rk3399/MAINTAINERS | 2 +- board/theobroma-systems/ringneck_px30/MAINTAINERS | 2 +- board/theobroma-systems/tiger_rk3588/MAINTAINERS | 2 +- configs/lion-rk3368_defconfig | 110 -------- doc/board/rockchip/rockchip.rst | 1 - include/configs/lion_rk3368.h | 16 -- 14 files changed, 4 insertions(+), 840 deletions(-)
---
base-commit: e124e630ad694327e33d6513e43951793e827d3a
change-id: 20240620-tsd-http-git-clone-53c0ea69adbe
Best regards,
Signature · 1 line
Quentin Schulz <[email protected]>
PATCH 1/2 rockchip: theobroma-systems: migrate git URLs to HTTPS
From: Quentin Schulz <[email protected]>
It turns out only Puma had a working git:// URL. Though that is now fixed, having HTTPS URLs make it easier to directly reach our cgit webserver to check what's up without having to change the URL manually.
Depending on your terminal settings, this also makes it possible to open the link from it.
--- board/theobroma-systems/jaguar_rk3588/MAINTAINERS | 2 +- board/theobroma-systems/puma_rk3399/MAINTAINERS | 2 +- board/theobroma-systems/ringneck_px30/MAINTAINERS | 2 +- board/theobroma-systems/tiger_rk3588/MAINTAINERS | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)
board/theobroma-systems/jaguar_rk3588/MAINTAINERS +1 -1
@@ -10,4 +10,4 @@ F: include/configs/jaguar_rk3588.h F: arch/arm/dts/rk3588-jaguar* F: configs/jaguar-rk3588_defconfig W: https://embedded.cherry.de/product/jaguar-sbc-rk3588/ -T: git git://git.embedded.cherry.de/jaguar-u-boot.git +T: git https://git.embedded.cherry.de/jaguar-u-boot.git
board/theobroma-systems/puma_rk3399/MAINTAINERS +1 -1
@@ -9,4 +9,4 @@ F: include/configs/puma_rk3399.h F: arch/arm/dts/rk3399-puma* F: configs/puma-rk3399_defconfig W: https://embedded.cherry.de/product/puma-som-rk3399-q7/ -T: git git://git.embedded.cherry.de/puma-u-boot.git +T: git https://git.embedded.cherry.de/puma-u-boot.git
board/theobroma-systems/ringneck_px30/MAINTAINERS +1 -1
@@ -9,4 +9,4 @@ F: include/configs/ringneck_px30.h F: arch/arm/dts/px30-ringneck* F: configs/ringneck-px30_defconfig W: https://embedded.cherry.de/product/ringneck-som-px30-uq7/ -T: git git://git.embedded.cherry.de/ringneck-u-boot.git +T: git https://git.embedded.cherry.de/ringneck-u-boot.git
board/theobroma-systems/tiger_rk3588/MAINTAINERS +1 -1
@@ -10,4 +10,4 @@ F: include/configs/tiger_rk3588.h F: arch/arm/dts/rk3588-tiger* F: configs/tiger-rk3588_defconfig W: https://embedded.cherry.de/product/tiger-som-rk3588-q7/ -T: git git://git.embedded.cherry.de/tiger-u-boot.git +T: git https://git.embedded.cherry.de/tiger-u-boot.git
Signature · 1 line
2.45.2
Re: [PATCH next 1/2] rockchip: theobroma-systems: migrate git URLs to HTTPS
Quoted 10 lines · Quentin Schulz
From: Quentin Schulz <[email protected]>
It turns out only Puma had a working
git://URL. Though that is now fixed, having HTTPS URLs make it easier to directly reach our cgit webserver to check what's up without having to change the URL manually.Depending on your terminal settings, this also makes it possible to open the link from it.
Signed-off-by Quentin Schulz <[email protected]>
Thanks,
- Kever
Quoted 48 lines
--- board/theobroma-systems/jaguar_rk3588/MAINTAINERS | 2 +- board/theobroma-systems/puma_rk3399/MAINTAINERS | 2 +- board/theobroma-systems/ringneck_px30/MAINTAINERS | 2 +- board/theobroma-systems/tiger_rk3588/MAINTAINERS | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)board/theobroma-systems/jaguar_rk3588/MAINTAINERS +1
-1@@ -10,4 +10,4 @@ F: include/configs/jaguar_rk3588.h F: arch/arm/dts/rk3588-jaguar* F: configs/jaguar-rk3588_defconfig W: https://embedded.cherry.de/product/jaguar-sbc-rk3588/ -T: git git://git.embedded.cherry.de/jaguar-u-boot.git +T: git https://git.embedded.cherry.de/jaguar-u-boot.gitboard/theobroma-systems/puma_rk3399/MAINTAINERS +1
-1@@ -9,4 +9,4 @@ F: include/configs/puma_rk3399.h F: arch/arm/dts/rk3399-puma* F: configs/puma-rk3399_defconfig W: https://embedded.cherry.de/product/puma-som-rk3399-q7/ -T: git git://git.embedded.cherry.de/puma-u-boot.git +T: git https://git.embedded.cherry.de/puma-u-boot.gitboard/theobroma-systems/ringneck_px30/MAINTAINERS +1
-1@@ -9,4 +9,4 @@ F: include/configs/ringneck_px30.h F: arch/arm/dts/px30-ringneck* F: configs/ringneck-px30_defconfig W: https://embedded.cherry.de/product/ringneck-som-px30-uq7/ -T: git git://git.embedded.cherry.de/ringneck-u-boot.git +T: git https://git.embedded.cherry.de/ringneck-u-boot.gitboard/theobroma-systems/tiger_rk3588/MAINTAINERS +1
-1@@ -10,4 +10,4 @@ F: include/configs/tiger_rk3588.h F: arch/arm/dts/rk3588-tiger* F: configs/tiger-rk3588_defconfig W: https://embedded.cherry.de/product/tiger-som-rk3588-q7/ -T: git git://git.embedded.cherry.de/tiger-u-boot.git +T: git https://git.embedded.cherry.de/tiger-u-boot.git
PATCH 2/2 rockchip: remove support for Theobroma Systems RK3368 Lion
In reply to Quentin SchulzFrom: Quentin Schulz <[email protected]>
No meaningful changes were made to this SoM since February 2021. Nobody from Theobroma has booted anything recent on that product since July 2021 at the latest. The product isn't available to buy anymore and disappeared from our website.
This product is therefore unmaintained and it would be disingenuous to say the opposite, so drop support for RK3368 Lion.
If you're a user of Lion, feel free to revert this patch or contact our sales/support department.
--- arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi | 119 --------- arch/arm/dts/rk3368-lion-haikou.dts | 144 ----------- arch/arm/dts/rk3368-lion.dtsi | 318 ------------------------ arch/arm/mach-rockchip/rk3368/Kconfig | 22 -- board/theobroma-systems/lion_rk3368/Kconfig | 18 -- board/theobroma-systems/lion_rk3368/MAINTAINERS | 10 - board/theobroma-systems/lion_rk3368/README | 78 ------ configs/lion-rk3368_defconfig | 110 -------- doc/board/rockchip/rockchip.rst | 1 - include/configs/lion_rk3368.h | 16 -- 10 files changed, 836 deletions(-)
arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi deleted +0 -119
@@ -1,119 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 -/* - * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH - */ - -#include "rk3368-u-boot.dtsi" - -/ { - config { - u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */ - u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - u-boot,spl-boot-order = &emmc, &sdmmc; - }; - - smbios { - compatible = "u-boot,sysinfo-smbios"; - - smbios { - system { - manufacturer = "rockchip"; - product = "sheep_rk3368"; - }; - - baseboard { - manufacturer = "rockchip"; - product = "sheep_rk3368"; - }; - - chassis { - manufacturer = "rockchip"; - product = "sheep_rk3368"; - }; - }; - }; -}; - -&gpio2 { - bootph-all; -}; - -&pinctrl { - bootph-all; -}; - -&service_msch { - bootph-all; -}; - -&dmc { - bootph-all; - - /* - * Validation of throughput using SPEC2000 shows the following - * relative performance for the different memory schedules: - * - CBDR: 30.1 - * - CBRD: 29.8 - * - CRBD: 29.9 - * Note that the best performance for any given application workload - * may vary from the default configured here (e.g. 164.gzip is fastest - * with CBRD, whereas 252.eon and 186.crafty are fastest with CRBD). - * - * See doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt for - * details on the 'rockchip,memory-schedule' property and how it - * affects the physical-address to device-address mapping. - */ - rockchip,memory-schedule = <DMC_MSCH_CBDR>; - rockchip,ddr-frequency = <800000000>; - rockchip,ddr-speed-bin = <DDR3_1600K>; - - status = "okay"; -}; - -&pmugrf { - bootph-all; -}; - -&sgrf { - bootph-all; -}; - -&cru { - bootph-all; -}; - -&grf { - bootph-all; -}; - -&uart0 { - bootph-all; -}; - -&emmc { - bootph-pre-ram; -}; - -&sdmmc { - bootph-pre-ram; -}; - -&spi1 { - bootph-pre-ram; - - spiflash: w25q32dw@0 { - bootph-pre-ram; - }; -}; - -&timer0 { - bootph-all; - clock-frequency = <24000000>; - status = "okay"; -}; - -
arch/arm/dts/rk3368-lion-haikou.dts deleted +0 -144
144 lines not on this page · raw message
arch/arm/dts/rk3368-lion.dtsi deleted +0 -318
318 lines not on this page · raw message
arch/arm/mach-rockchip/rk3368/Kconfig +0 -22
@@ -3,27 +3,6 @@ if ROCKCHIP_RK3368 choice prompt "RK3368 board" -config TARGET_LION_RK3368 - bool "Theobroma Systems RK3368-uQ7 (Lion) module" - select ARCH_EARLY_INIT_R - help - The RK3368-uQ7 is a micro-Qseven form-factor (40mm x 70mm, - MXM-230 connector) system-on-module designed by Theobroma - Systems for industrial applications. - - It provides the following features: - - 8x Cortex-A53 (in 2 clusters of 4 cores each) - - (on-module) up to 4GB of DDR3 memory - - (on-module) SPI-NOR flash - - (on-module) eMMC - - Gigabit Ethernet (with an on-module KSZ9031 PHY) - - USB - - HDMI - - MIPI-DSI/single-channel LVDS (muxed on the 'LVDS-A' pin-group) - - various 'slow' interfaces (e.g. UART, SPI, I2C, I2S, ...) - - on-module STM32 providing CAN, RTC and fan-control - - (optional on-module) EAL4+-certified security module - config TARGET_SHEEP bool "Sheep board" help
@@ -62,7 +41,6 @@ config SPL_LIBCOMMON_SUPPORT config SPL_LIBGENERIC_SUPPORT default y -source "board/theobroma-systems/lion_rk3368/Kconfig" source "board/rockchip/sheep_rk3368/Kconfig" source "board/geekbuying/geekbox/Kconfig" source "board/rockchip/evb_px5/Kconfig"
board/theobroma-systems/lion_rk3368/Kconfig deleted +0 -18
@@ -1,18 +0,0 @@ -if TARGET_LION_RK3368 - -config SYS_BOARD - default "lion_rk3368" - -config SYS_VENDOR - default "theobroma-systems" - -config SYS_CONFIG_NAME - default "lion_rk3368" - -config ENV_SIZE - default 0x2000 - -config ENV_OFFSET - default 0x3c000 if ENV_IS_IN_SPI_FLASH - -endif
board/theobroma-systems/lion_rk3368/MAINTAINERS deleted +0 -10
@@ -1,10 +0,0 @@ -LION-RK3368 (RK3368-uQ7 system-on-module) -M: Quentin Schulz <[email protected]> -M: Klaus Goger <[email protected]> -S: Maintained -F: board/theobroma-systems/lion_rk3368 -F: include/configs/lion_rk3368.h -F: arch/arm/dts/rk3368-lion.dts -F: configs/lion-rk3368_defconfig -W: https://www.theobroma-systems.com/rk3368-uq7/tech-specs -T: git git://git.theobroma-systems.com/lion-u-boot.git
board/theobroma-systems/lion_rk3368/README deleted +0 -78
78 lines not on this page · raw message
configs/lion-rk3368_defconfig deleted +0 -110
110 lines not on this page · raw message
doc/board/rockchip/rockchip.rst +0 -1
@@ -72,7 +72,6 @@ List of mainline supported Rockchip boards: - GeekBox (geekbox) - PX5 EVB (evb-px5) - Rockchip Sheep (sheep-rk3368) - - Theobroma Systems RK3368-uQ7 SoM - Lion (lion-rk3368) * rk3399 - 96boards RK3399 Ficus (ficus-rk3399) - 96boards Rock960 (rock960-rk3399)
include/configs/lion_rk3368.h deleted +0 -16
@@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH -*/ - -#ifndef __CONFIGS_LION_RK3368_H -#define __CONFIGS_LION_RK3368_H - -#include <configs/rk3368_common.h> - -#define KERNEL_LOAD_ADDR 0x280000 -#define DTB_LOAD_ADDR 0x5600000 -#define INITRD_LOAD_ADDR 0x5bf0000 -/* PHY needs longer aneg time at 1G */ - -#endif
Signature · 1 line
2.45.2
Re: [PATCH next 2/2] rockchip: remove support for Theobroma Systems RK3368 Lion
Am Donnerstag, 20. Juni 2024, 12:24:51 CEST schrieb Quentin Schulz:
Quoted 7 lines
From: Quentin Schulz <[email protected]>
No meaningful changes were made to this SoM since February 2021. Nobody from Theobroma has booted anything recent on that product since July 2021 at the latest. The product isn't available to buy anymore and disappeared from our website.
Quoted 7 lines
This product is therefore unmaintained and it would be disingenuous to say the opposite, so drop support for RK3368 Lion.
If you're a user of Lion, feel free to revert this patch or contact our sales/support department.
Signed-off-by Quentin Schulz <[email protected]>
I think any meaningful work on rk3368 in general has pretty much stalled at this point.
Re: [PATCH next 2/2] rockchip: remove support for Theobroma Systems RK3368 Lion
In reply to Quentin SchulzAm 20.06.24 um 12:24 schrieb Quentin Schulz:
Quoted 7 lines
From: Quentin Schulz <[email protected]>
No meaningful changes were made to this SoM since February 2021. Nobody from Theobroma has booted anything recent on that product since July 2021 at the latest. The product isn't available to buy anymore and disappeared from our website.
Quoted 5 lines
This product is therefore unmaintained and it would be disingenuous to say the opposite, so drop support for RK3368 Lion.
If you're a user of Lion, feel free to revert this patch or contact our sales/support department.
That's a pretty interesting support-strategy. While I really don't care for this board, please don't go ahead and remove the whole TPL-/SPL-part for RK3368 in yet another pointless "cleanup" only because lion was one the of last/only user. Even if EOL RK3368 is getting finally interesting in regards of display pipeline as we are finally getting a OSS gpu driver [0]. I'm planning to add a board which uses TPL/SPL soonish (when my rare spare time allows).
Alex
[0] https://gitlab.freedesktop.org/frankbinns/linux-firmware/-/issues/1
Re: [PATCH next 2/2] rockchip: remove support for Theobroma Systems RK3368 Lion
Quoted 13 lines · Alex Bee
Am 20.06.24 um 12:24 schrieb Quentin Schulz:
Quoted 7 lines
From: Quentin Schulz <[email protected]>
No meaningful changes were made to this SoM since February 2021. Nobody from Theobroma has booted anything recent on that product since July 2021 at the latest. The product isn't available to buy anymore and disappeared from our website.
Quoted 5 lines
This product is therefore unmaintained and it would be disingenuous to say the opposite, so drop support for RK3368 Lion.
If you're a user of Lion, feel free to revert this patch or contact our sales/support department.
Quoted 7 lines
That's a pretty interesting support-strategy. While I really don't care for this board, please don't go ahead and remove the whole TPL-/SPL-part for RK3368 in yet another pointless "cleanup" only because lion was one the of last/only user. Even if EOL RK3368 is getting finally interesting in regards of display pipeline as we are finally getting a OSS gpu driver [0]. I'm planning to add a board which uses TPL/SPL soonish (when my rare spare time allows).
Please update the MAINTAINERS file for the relevant to your future platform, or even better possibly get a skeleton of this platform posted. Thanks.
Signature · 1 line
Tom
Re: [PATCH next 2/2] rockchip: remove support for Theobroma Systems RK3368 Lion
Am 20.06.24 um 19:08 schrieb Tom Rini:
Quoted 21 lines · Alex Bee
Quoted 13 lines
Am 20.06.24 um 12:24 schrieb Quentin Schulz:
Quoted 7 lines
From: Quentin Schulz <[email protected]>
No meaningful changes were made to this SoM since February 2021. Nobody from Theobroma has booted anything recent on that product since July 2021 at the latest. The product isn't available to buy anymore and disappeared from our website.
Quoted 5 lines
This product is therefore unmaintained and it would be disingenuous to say the opposite, so drop support for RK3368 Lion.
If you're a user of Lion, feel free to revert this patch or contact our sales/support department.
Quoted 7 lines
That's a pretty interesting support-strategy. While I really don't care for this board, please don't go ahead and remove the whole TPL-/SPL-part for RK3368 in yet another pointless "cleanup" only because lion was one the of last/only user. Even if EOL RK3368 is getting finally interesting in regards of display pipeline as we are finally getting a OSS gpu driver [0]. I'm planning to add a board which uses TPL/SPL soonish (when my rare spare time allows).
Quoted 4 lines
Please update the
MAINTAINERSfile for the relevant to your future platform, or even better possibly get a skeleton of this platform posted. Thanks.
I don't think the whole platform would get removed as it has several users (and is maintained) - I just was a bit worried that TPL/SPL support could get removed, but now noticed there is one more user: evb-px5. So: sorry for noise.
So I will go the usual way via upstream DT (linux tree) addition and so forth.
Re: [PATCH next 2/2] rockchip: remove support for Theobroma Systems RK3368 Lion
Quoted 28 lines · Alex Bee
Am 20.06.24 um 19:08 schrieb Tom Rini:
Quoted 21 lines · Alex Bee
Quoted 13 lines
Am 20.06.24 um 12:24 schrieb Quentin Schulz:
Quoted 7 lines
From: Quentin Schulz <[email protected]>
No meaningful changes were made to this SoM since February 2021. Nobody from Theobroma has booted anything recent on that product since July 2021 at the latest. The product isn't available to buy anymore and disappeared from our website.
Quoted 5 lines
This product is therefore unmaintained and it would be disingenuous to say the opposite, so drop support for RK3368 Lion.
If you're a user of Lion, feel free to revert this patch or contact our sales/support department.
Quoted 7 lines
That's a pretty interesting support-strategy. While I really don't care for this board, please don't go ahead and remove the whole TPL-/SPL-part for RK3368 in yet another pointless "cleanup" only because lion was one the of last/only user. Even if EOL RK3368 is getting finally interesting in regards of display pipeline as we are finally getting a OSS gpu driver [0]. I'm planning to add a board which uses TPL/SPL soonish (when my rare spare time allows).
Quoted 4 lines
Please update the
MAINTAINERSfile for the relevant to your future platform, or even better possibly get a skeleton of this platform posted. Thanks.
Quoted 6 lines
I don't think the whole platform would get removed as it has several users (and is maintained) - I just was a bit worried that TPL/SPL support could get removed, but now noticed there is one more user: evb-px5. So: sorry for noise.
So I will go the usual way via upstream DT (linux tree) addition and so forth.
It's easy enough to bring back the pieces from git, I have a geekbox somewhere I've always meant to take a closer look at.
Re: [PATCH next 2/2] rockchip: remove support for Theobroma Systems RK3368 Lion
In reply to Quentin SchulzQuoted 7 lines · Quentin Schulz
From: Quentin Schulz <[email protected]>
No meaningful changes were made to this SoM since February 2021. Nobody from Theobroma has booted anything recent on that product since July 2021 at the latest. The product isn't available to buy anymore and disappeared from our website.
Quoted 7 lines
This product is therefore unmaintained and it would be disingenuous to say the opposite, so drop support for RK3368 Lion.
If you're a user of Lion, feel free to revert this patch or contact our sales/support department.
Signed-off-by Quentin Schulz <[email protected]>
Thanks,
- Kever
Quoted 927 lines
--- arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi | 119 --------- arch/arm/dts/rk3368-lion-haikou.dts | 144 ----------- arch/arm/dts/rk3368-lion.dtsi | 318 ------------------------ arch/arm/mach-rockchip/rk3368/Kconfig | 22 -- board/theobroma-systems/lion_rk3368/Kconfig | 18 -- board/theobroma-systems/lion_rk3368/MAINTAINERS | 10 - board/theobroma-systems/lion_rk3368/README | 78 ------ configs/lion-rk3368_defconfig | 110 -------- doc/board/rockchip/rockchip.rst | 1 - include/configs/lion_rk3368.h | 16 -- 10 files changed, 836 deletions(-)arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi deleted +0
-119@@ -1,119 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 -/* - * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH - */ - -#include "rk3368-u-boot.dtsi" - -/ { - config { - u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */ - u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - u-boot,spl-boot-order = &emmc, &sdmmc; - }; - - smbios { - compatible = "u-boot,sysinfo-smbios"; - - smbios { - system { - manufacturer = "rockchip"; - product = "sheep_rk3368"; - }; - - baseboard { - manufacturer = "rockchip"; - product = "sheep_rk3368"; - }; - - chassis { - manufacturer = "rockchip"; - product = "sheep_rk3368"; - }; - }; - }; -}; - -&gpio2 { - bootph-all; -}; - -&pinctrl { - bootph-all; -}; - -&service_msch { - bootph-all; -}; - -&dmc { - bootph-all; - - /* - * Validation of throughput using SPEC2000 shows the following - * relative performance for the different memory schedules: - * - CBDR: 30.1 - * - CBRD: 29.8 - * - CRBD: 29.9 - * Note that the best performance for any given application workload - * may vary from the default configured here (e.g. 164.gzip is fastest - * with CBRD, whereas 252.eon and 186.crafty are fastest with CRBD). - * - * See doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt for - * details on the 'rockchip,memory-schedule' property and how it - * affects the physical-address to device-address mapping. - */ - rockchip,memory-schedule = <DMC_MSCH_CBDR>; - rockchip,ddr-frequency = <800000000>; - rockchip,ddr-speed-bin = <DDR3_1600K>; - - status = "okay"; -}; - -&pmugrf { - bootph-all; -}; - -&sgrf { - bootph-all; -}; - -&cru { - bootph-all; -}; - -&grf { - bootph-all; -}; - -&uart0 { - bootph-all; -}; - -&emmc { - bootph-pre-ram; -}; - -&sdmmc { - bootph-pre-ram; -}; - -&spi1 { - bootph-pre-ram; - - spiflash: w25q32dw@0 { - bootph-pre-ram; - }; -}; - -&timer0 { - bootph-all; - clock-frequency = <24000000>; - status = "okay"; -}; - -arch/arm/dts/rk3368-lion-haikou.dts deleted +0
-144@@ -1,144 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH - */ - -/dts-v1/; -#include "rk3368-lion.dtsi" - -/ { - model = "Theobroma Systems RK3368-uQ7 Baseboard"; - compatible = "tsd,rk3368-lion-haikou", "rockchip,rk3368"; - - aliases { - mmc1 = &sdmmc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - i2cmux2 { - i2c@0 { - eeprom: eeprom@50 { - compatible = "atmel,24c01"; - pagesize = <8>; - reg = <0x50>; - }; - }; - }; - - leds { - pinctrl-0 = <&module_led_pins>, <&sd_card_led_pin>; - - sd_card_led: led-3 { - label = "sd_card_led"; - gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - }; - }; - - dc_12v: dc-12v { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - vcc3v3_baseboard: vcc3v3-baseboard { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_baseboard"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; - }; - - vcc5v0_otg: vcc5v0-otg-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&otg_vbus_drv>; - regulator-name = "vcc5v0_otg"; - regulator-always-on; - }; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <25000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; - rockchip,default-sample-phase = <90>; - vmmc-supply = <&vcc3v3_baseboard>; - status = "okay"; -}; - -&spi2 { - cs-gpios = <0>, <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - status = "okay"; -}; - -&uart1 { - /* alternate function of GPIO5/6 */ - status = "disabled"; -}; - -&pinctrl { - pinctrl-names = "default"; - pinctrl-0 = <&haikou_pin_hog>; - - hog { - haikou_pin_hog: haikou-pin-hog { - rockchip,pins = - /* LID_BTN */ - <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, - /* BATLOW# */ - <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>, - /* SLP_BTN# */ - <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, - /* BIOS_DISABLE# */ - <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - leds { - sd_card_led_pin: sd-card-led-pin { - rockchip,pins = - <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdmmc { - sdmmc_cd_pin: sdmmc-cd-pin { - rockchip,pins = - <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb_otg { - otg_vbus_drv: otg-vbus-drv { - rockchip,pins = - <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -};arch/arm/dts/rk3368-lion.dtsi deleted +0
-318@@ -1,318 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH - */ - -/dts-v1/; -#include "rk3368.dtsi" - -/ { - aliases { - mmc0 = &emmc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - ext_gmac: gmac-clk { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - #clock-cells = <0>; - }; - - i2cmux1 { - compatible = "i2c-mux-gpio"; - #address-cells = <1>; - #size-cells = <0>; - i2c-parent = <&i2c1>; - mux-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>; - - /* Q7_GPO_I2C */ - i2c@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - /* Q7_SMB */ - i2c@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - i2cmux2 { - compatible = "i2c-mux-gpio"; - #address-cells = <1>; - #size-cells = <0>; - i2c-parent = <&i2c2>; - mux-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>; - - /* Q7_LVDS_BLC_I2C */ - i2c@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - fan: fan@18 { - compatible = "ti,amc6821"; - reg = <0x18>; - #cooling-cells = <2>; - }; - - rtc_twi: rtc@6f { - compatible = "isil,isl1208"; - reg = <0x6f>; - }; - }; - - /* Q7_GP2_I2C */ - i2c@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&module_led_pins>; - - module_led1: led-1 { - label = "module_led1"; - gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - panic-indicator; - }; - - module_led2: led-2 { - label = "module_led2"; - gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - - vcc_sys: vcc-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_b2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_b3 { - cpu-supply = <&vdd_cpu>; -}; - -&emmc { - bus-width = <8>; - clock-frequency = <150000000>; - mmc-hs200-1_8v; - non-removable; - vmmc-supply = <&vcc33_io>; - vqmmc-supply = <&vcc18_io>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc33_io>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; - tx_delay = <0x10>; - rx_delay = <0x10>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; - clock-output-names = "xin32k", "rk808-clkout2"; - #clock-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>, <&pmic_sleep>; - rockchip,system-power-controller; - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; - vcc8-supply = <&vcc_sys>; - vcc9-supply = <&vcc_sys>; - vcc10-supply = <&vcc_sys>; - vcc11-supply = <&vcc_sys>; - vcc12-supply = <&vcc_sys>; - - regulators { - vdd_cpu: DCDC_REG1 { - regulator-name = "vdd_cpu"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_log: DCDC_REG2 { - regulator-name = "vdd_log"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - }; - - vcc33_io: DCDC_REG4 { - regulator-name = "vcc33_io"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc33_video: LDO_REG2 { - regulator-name = "vcc33_video"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd10_pll: LDO_REG3 { - regulator-name = "vdd10_pll"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc18_io: LDO_REG4 { - regulator-name = "vcc18_io"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - }; - - vdd10_video: LDO_REG6 { - regulator-name = "vdd10_video"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc18_video: LDO_REG8 { - regulator-name = "vcc18_video"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - }; - }; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; -}; - -&pinctrl { - leds { - module_led_pins: module-led-pins { - rockchip,pins = - <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>, - <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - pmic_sleep: pmic-sleep { - rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; - }; - }; -}; - -&spi1 { - status = "okay"; - - norflash: flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - }; -}; - -&uart1 { - status = "okay"; -}; - -&uart3 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&wdt { - status = "okay"; -};arch/arm/mach-rockchip/rk3368/Kconfig +0
-22@@ -3,27 +3,6 @@ if ROCKCHIP_RK3368 choice prompt "RK3368 board" -config TARGET_LION_RK3368 - bool "Theobroma Systems RK3368-uQ7 (Lion) module" - select ARCH_EARLY_INIT_R - help - The RK3368-uQ7 is a micro-Qseven form-factor (40mm x 70mm, - MXM-230 connector) system-on-module designed by Theobroma - Systems for industrial applications. - - It provides the following features: - - 8x Cortex-A53 (in 2 clusters of 4 cores each) - - (on-module) up to 4GB of DDR3 memory - - (on-module) SPI-NOR flash - - (on-module) eMMC - - Gigabit Ethernet (with an on-module KSZ9031 PHY) - - USB - - HDMI - - MIPI-DSI/single-channel LVDS (muxed on the 'LVDS-A' pin-group) - - various 'slow' interfaces (e.g. UART, SPI, I2C, I2S, ...) - - on-module STM32 providing CAN, RTC and fan-control - - (optional on-module) EAL4+-certified security module - config TARGET_SHEEP bool "Sheep board" help@@ -62,7 +41,6 @@ config SPL_LIBCOMMON_SUPPORT config SPL_LIBGENERIC_SUPPORT default y -source "board/theobroma-systems/lion_rk3368/Kconfig" source "board/rockchip/sheep_rk3368/Kconfig" source "board/geekbuying/geekbox/Kconfig" source "board/rockchip/evb_px5/Kconfig"board/theobroma-systems/lion_rk3368/Kconfig deleted +0
-18@@ -1,18 +0,0 @@ -if TARGET_LION_RK3368 - -config SYS_BOARD - default "lion_rk3368" - -config SYS_VENDOR - default "theobroma-systems" - -config SYS_CONFIG_NAME - default "lion_rk3368" - -config ENV_SIZE - default 0x2000 - -config ENV_OFFSET - default 0x3c000 if ENV_IS_IN_SPI_FLASH - -endifboard/theobroma-systems/lion_rk3368/MAINTAINERS deleted +0
-10@@ -1,10 +0,0 @@ -LION-RK3368 (RK3368-uQ7 system-on-module) -M: Quentin Schulz <[email protected]> -M: Klaus Goger <[email protected]> -S: Maintained -F: board/theobroma-systems/lion_rk3368 -F: include/configs/lion_rk3368.h -F: arch/arm/dts/rk3368-lion.dts -F: configs/lion-rk3368_defconfig -W: https://www.theobroma-systems.com/rk3368-uq7/tech-specs -T: git git://git.theobroma-systems.com/lion-u-boot.gitboard/theobroma-systems/lion_rk3368/README deleted +0
-78@@ -1,78 +0,0 @@ -Here is the step-by-step to boot to U-Boot on RK3368-uQ7 - -Get the Source and build ATF -============================ - - > git clone git://git.theobroma-systems.com/arm-trusted-firmware.git - > cd arm-trusted-firmware - > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3368 bl31 - > cp build/rk3368/release/bl31.bin ../u-boot/bl31-rk3368.bin - -Configure U-Boot -================ - - > cd ../u-boot - > make lion-rk3368_defconfig - -Build the TPL/SPL stage -======================= - - > make CROSS_COMPILE=aarch64-unknown-elf- - -Build the full U-Boot and a FIT image including the ATF -======================================================= - - > make CROSS_COMPILE=aarch64-unknown-elf- u-boot.itb - -Flash the image -=============== - -Copy the SPL to offset 32k and the FIT image containing the payloads -(U-Boot proper, ATF, devicetree) to offset 256k card. - -SD-Card -------- - - > dd if=idbloader.img of=/dev/sdb seek=64 - > dd if=u-boot.itb of=/dev/sdb seek=512 - -eMMC ----- - -rkdeveloptool allows to flash the on-board eMMC via the USB OTG interface with -help of the Rockchip loader binary. - - > git clone https://github.com/rockchip-linux/rkdeveloptool - > cd rkdeveloptool - > autoreconf -i && && ./configure && make - > git clone https://github.com/rockchip-linux/rkbin.git - > ./rkdeveloptool db rkbin/rk33/rk3368_loader_v2.00.256.bin - > ./rkdeveloptool wl 64 ../spl.img - > ./rkdeveloptool wl 512 ../u-boot.itb - - -If everything went according to plan, you should see the following -output on UART0: - -<debug_uart> U-Boot TPL board init -Trying to boot from BOOTROM -Returning to boot ROM... -Trying to boot from MMC1 -NOTICE: BL31: v1.3(release):v1.2-1320-gbf43a443 -NOTICE: BL31: Built : 18:04:47, Jul 5 2017 - - -U-Boot 2017.07-00158-g2395e99858 (Jul 18 2017 - 21:03:31 +0200) - -Model: Theobroma Systems RK3368-uQ7 SoM -DRAM: 2 GiB -MMC: dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0 -Using default environment - -In: serial@ff180000 -Out: serial@ff180000 -Err: serial@ff180000 -Net: -Warning: ethernet@ff290000 (eth0) using random MAC address - d2:69:35:7e:d0:1e -eth0: ethernet@ff290000 -Hit any key to stop autoboot: 2configs/lion-rk3368_defconfig deleted +0
-110@@ -1,110 +0,0 @@ -CONFIG_ARM=y -CONFIG_SKIP_LOWLEVEL_INIT=y -CONFIG_COUNTER_FREQUENCY=24000000 -CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00200000 -CONFIG_NR_DRAM_BANKS=1 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 -CONFIG_ENV_OFFSET=0x3F8000 -CONFIG_DEFAULT_DEVICE_TREE="rk3368-lion-haikou" -CONFIG_SPL_TEXT_BASE=0x00000000 -CONFIG_ROCKCHIP_RK3368=y -CONFIG_TPL_LIBCOMMON_SUPPORT=y -CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x188000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x400000 -CONFIG_SPL_BSS_MAX_SIZE=0x20000 -CONFIG_SPL_STACK_R=y -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xFF180000 -CONFIG_DEBUG_UART_CLOCK=24000000 -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI=y -CONFIG_SYS_LOAD_ADDR=0x800800 -CONFIG_DEBUG_UART=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -CONFIG_BOOTSTAGE=y -CONFIG_SPL_BOOTSTAGE=y -CONFIG_BOOTSTAGE_REPORT=y -CONFIG_BOOTSTAGE_FDT=y -CONFIG_DEFAULT_FDT_FILE="rockchip/rk3368-lion-haikou.dtb" -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_MAX_SIZE=0x40000 -CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_BOOTROM_SUPPORT=y -# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 -CONFIG_SPL_ATF=y -CONFIG_TPL=y -CONFIG_TPL_SYS_MALLOC_SIMPLE=y -CONFIG_TPL_DRIVERS_MISC=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -CONFIG_CMD_BOOTSTAGE=y -CONFIG_CMD_REGULATOR=y -CONFIG_CMD_MTDPARTS=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_TPL_OF_CONTROL=y -CONFIG_OF_LIVE=y -CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent" -CONFIG_TPL_OF_PLATDATA=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_TPL_DM=y -CONFIG_REGMAP=y -CONFIG_SPL_REGMAP=y -CONFIG_TPL_REGMAP=y -CONFIG_SYSCON=y -CONFIG_SPL_SYSCON=y -CONFIG_TPL_SYSCON=y -CONFIG_CLK=y -CONFIG_SPL_CLK=y -CONFIG_TPL_CLK=y -CONFIG_ROCKCHIP_GPIO=y -CONFIG_SYS_I2C_ROCKCHIP=y -CONFIG_MMC_DW=y -CONFIG_MMC_DW_ROCKCHIP=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_PHY_ANEG_TIMEOUT=8000 -CONFIG_PHY_MSCC=y -CONFIG_DM_ETH_PHY=y -CONFIG_ETH_DESIGNWARE=y -CONFIG_RGMII=y -CONFIG_GMAC_ROCKCHIP=y -CONFIG_PINCTRL=y -CONFIG_SPL_PINCTRL=y -CONFIG_DM_PMIC=y -CONFIG_PMIC_RK8XX=y -CONFIG_DM_REGULATOR_FIXED=y -CONFIG_REGULATOR_RK8XX=y -CONFIG_RAM=y -CONFIG_SPL_RAM=y -CONFIG_TPL_RAM=y -CONFIG_DEBUG_UART_SHIFT=2 -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_SYS_NS16550_MEM32=y -CONFIG_ROCKCHIP_SPI=y -CONFIG_SYSINFO=y -CONFIG_SYSINFO_SMBIOS=y -CONFIG_SYSRESET=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_GENERIC=y -CONFIG_USB_DWC2=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DWC2_OTG=y -CONFIG_SPL_TINY_MEMSET=y -CONFIG_LZO=y -CONFIG_ERRNO_STR=ydoc/board/rockchip/rockchip.rst +0
-1@@ -72,7 +72,6 @@ List of mainline supported Rockchip boards: - GeekBox (geekbox) - PX5 EVB (evb-px5) - Rockchip Sheep (sheep-rk3368) - - Theobroma Systems RK3368-uQ7 SoM - Lion (lion-rk3368) * rk3399 - 96boards RK3399 Ficus (ficus-rk3399) - 96boards Rock960 (rock960-rk3399)include/configs/lion_rk3368.h deleted +0
-16@@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH -*/ - -#ifndef __CONFIGS_LION_RK3368_H -#define __CONFIGS_LION_RK3368_H - -#include <configs/rk3368_common.h> - -#define KERNEL_LOAD_ADDR 0x280000 -#define DTB_LOAD_ADDR 0x5600000 -#define INITRD_LOAD_ADDR 0x5bf0000 -/* PHY needs longer aneg time at 1G */ - -#endif
Re: [PATCH next 2/2] rockchip: remove support for Theobroma Systems RK3368 Lion
Hi Quentin,
Quoted 12 lines · Kever Yang
Quoted 10 lines · Quentin Schulz
From: Quentin Schulz <[email protected]>
No meaningful changes were made to this SoM since February 2021. Nobody from Theobroma has booted anything recent on that product since July 2021 at the latest. The product isn't available to buy anymore and disappeared from our website.
This product is therefore unmaintained and it would be disingenuous to say the opposite, so drop support for RK3368 Lion.
Quoted 13 lines
Quoted 4 lines
If you're a user of Lion, feel free to revert this patch or contact our sales/support department.
Signed-off-by Quentin Schulz <[email protected]>Reviewed-by Kever Yang <[email protected]>Thanks,
- KeverQuoted 5 lines
---
arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi | 119 --------- arch/arm/dts/rk3368-lion-haikou.dts | 144 ----------- arch/arm/dts/rk3368-lion.dtsi | 318
------------------------
I think you forgot to remove rk3368-lion-haikou.dtb in Makefile.
Thanks,
- Kever
Quoted 926 lines
Quoted 926 lines
arch/arm/mach-rockchip/rk3368/Kconfig | 22 -- board/theobroma-systems/lion_rk3368/Kconfig | 18 -- board/theobroma-systems/lion_rk3368/MAINTAINERS | 10 - board/theobroma-systems/lion_rk3368/README | 78 ------ configs/lion-rk3368_defconfig | 110 -------- doc/board/rockchip/rockchip.rst | 1 - include/configs/lion_rk3368.h | 16 --
10 files changed, 836 deletions(-)arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi deleted +0
-62@@ -1,119 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 -/* - * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH - */ - -#include "rk3368-u-boot.dtsi" - -/ { - config { - u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */ - u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - u-boot,spl-boot-order = &emmc, &sdmmc; - }; - - smbios { - compatible = "u-boot,sysinfo-smbios"; - - smbios { - system { - manufacturer = "rockchip"; - product = "sheep_rk3368"; - }; - - baseboard { - manufacturer = "rockchip"; - product = "sheep_rk3368"; - }; - - chassis { - manufacturer = "rockchip"; - product = "sheep_rk3368"; - }; - }; - }; -}; - -&gpio2 { - bootph-all; -}; - -&pinctrl { - bootph-all; -}; - -&service_msch { - bootph-all; -}; - -&dmc { - bootph-all; - - /* - * Validation of throughput using SPEC2000 shows the following - * relative performance for the different memory schedules: - * - CBDR: 30.1 - * - CBRD: 29.8 - * - CRBD: 29.9 - * Note that the best performance for any given applicationworkload
- * may vary from the default configured here (e.g. 164.gzip is fastest
- * with CBRD, whereas 252.eon and 186.crafty are fastest with CRBD).
- *
- * Seedoc/device-tree-bindings/clock/rockchip,rk3368-dmc.txtfor - * details on the 'rockchip,memory-schedule' property and how it - * affects the physical-address to device-address mapping. - */
- rockchip,memory-schedule = <DMC_MSCH_CBDR>;
- rockchip,ddr-frequency = <800000000>;
- rockchip,ddr-speed-bin = <DDR3_1600K>;arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi deleted +0
-47- - status = "okay"; -}; - -&pmugrf { - bootph-all; -}; - -&sgrf { - bootph-all; -}; - -&cru { - bootph-all; -}; - -&grf { - bootph-all; -}; - -&uart0 { - bootph-all; -}; - -&emmc { - bootph-pre-ram; -}; - -&sdmmc { - bootph-pre-ram; -}; - -&spi1 { - bootph-pre-ram; - - spiflash: w25q32dw@0 { - bootph-pre-ram; - }; -}; - -&timer0 { - bootph-all; - clock-frequency = <24000000>; - status = "okay"; -}; - -arch/arm/dts/rk3368-lion-haikou.dts deleted +0
-144@@ -1,144 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH - */ - -/dts-v1/; -#include "rk3368-lion.dtsi" - -/ { - model = "Theobroma Systems RK3368-uQ7 Baseboard"; - compatible = "tsd,rk3368-lion-haikou", "rockchip,rk3368"; - - aliases { - mmc1 = &sdmmc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - i2cmux2 { - i2c@0 { - eeprom: eeprom@50 { - compatible = "atmel,24c01"; - pagesize = <8>; - reg = <0x50>; - }; - }; - }; - - leds { - pinctrl-0 = <&module_led_pins>, <&sd_card_led_pin>; - - sd_card_led: led-3 { - label = "sd_card_led"; - gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - }; - }; - - dc_12v: dc-12v { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - vcc3v3_baseboard: vcc3v3-baseboard { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_baseboard"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; - }; - - vcc5v0_otg: vcc5v0-otg-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&otg_vbus_drv>; - regulator-name = "vcc5v0_otg"; - regulator-always-on; - }; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <25000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; - rockchip,default-sample-phase = <90>; - vmmc-supply = <&vcc3v3_baseboard>; - status = "okay"; -}; - -&spi2 { - cs-gpios = <0>, <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - status = "okay"; -}; - -&uart1 { - /* alternate function of GPIO5/6 */ - status = "disabled"; -}; - -&pinctrl { - pinctrl-names = "default"; - pinctrl-0 = <&haikou_pin_hog>; - - hog { - haikou_pin_hog: haikou-pin-hog { - rockchip,pins = - /* LID_BTN */ - <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, - /* BATLOW# */ - <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>, - /* SLP_BTN# */ - <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, - /* BIOS_DISABLE# */ - <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - leds { - sd_card_led_pin: sd-card-led-pin { - rockchip,pins = - <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdmmc { - sdmmc_cd_pin: sdmmc-cd-pin { - rockchip,pins = - <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb_otg { - otg_vbus_drv: otg-vbus-drv { - rockchip,pins = - <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -};arch/arm/dts/rk3368-lion.dtsi deleted +0
-318@@ -1,318 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH - */ - -/dts-v1/; -#include "rk3368.dtsi" - -/ { - aliases { - mmc0 = &emmc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - ext_gmac: gmac-clk { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - #clock-cells = <0>; - }; - - i2cmux1 { - compatible = "i2c-mux-gpio"; - #address-cells = <1>; - #size-cells = <0>; - i2c-parent = <&i2c1>; - mux-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>; - - /* Q7_GPO_I2C */ - i2c@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - /* Q7_SMB */ - i2c@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - i2cmux2 { - compatible = "i2c-mux-gpio"; - #address-cells = <1>; - #size-cells = <0>; - i2c-parent = <&i2c2>; - mux-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>; - - /* Q7_LVDS_BLC_I2C */ - i2c@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - fan: fan@18 { - compatible = "ti,amc6821"; - reg = <0x18>; - #cooling-cells = <2>; - }; - - rtc_twi: rtc@6f { - compatible = "isil,isl1208"; - reg = <0x6f>; - }; - }; - - /* Q7_GP2_I2C */ - i2c@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&module_led_pins>; - - module_led1: led-1 { - label = "module_led1"; - gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - panic-indicator; - }; - - module_led2: led-2 { - label = "module_led2"; - gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - - vcc_sys: vcc-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_b2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_b3 { - cpu-supply = <&vdd_cpu>; -}; - -&emmc { - bus-width = <8>; - clock-frequency = <150000000>; - mmc-hs200-1_8v; - non-removable; - vmmc-supply = <&vcc33_io>; - vqmmc-supply = <&vcc18_io>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc33_io>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; - tx_delay = <0x10>; - rx_delay = <0x10>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; - clock-output-names = "xin32k", "rk808-clkout2"; - #clock-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>, <&pmic_sleep>; - rockchip,system-power-controller; - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; - vcc8-supply = <&vcc_sys>; - vcc9-supply = <&vcc_sys>; - vcc10-supply = <&vcc_sys>; - vcc11-supply = <&vcc_sys>; - vcc12-supply = <&vcc_sys>; - - regulators { - vdd_cpu: DCDC_REG1 { - regulator-name = "vdd_cpu"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_log: DCDC_REG2 { - regulator-name = "vdd_log"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - }; - - vcc33_io: DCDC_REG4 { - regulator-name = "vcc33_io"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc33_video: LDO_REG2 { - regulator-name = "vcc33_video"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd10_pll: LDO_REG3 { - regulator-name = "vdd10_pll"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc18_io: LDO_REG4 { - regulator-name = "vcc18_io"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - }; - - vdd10_video: LDO_REG6 { - regulator-name = "vdd10_video"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc18_video: LDO_REG8 { - regulator-name = "vcc18_video"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - }; - }; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; -}; - -&pinctrl { - leds { - module_led_pins: module-led-pins { - rockchip,pins = - <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>, - <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - pmic_sleep: pmic-sleep { - rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; - }; - }; -}; - -&spi1 { - status = "okay"; - - norflash: flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - }; -}; - -&uart1 { - status = "okay"; -}; - -&uart3 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&wdt { - status = "okay"; -};arch/arm/mach-rockchip/rk3368/Kconfig +0
-0@@ -3,27 +3,6 @@ if ROCKCHIP_RK3368choice
prompt "RK3368 board"
-configTARGET_LION_RK3368
- bool "Theobroma Systems RK3368-uQ7 (Lion) module" - selectARCH_EARLY_INIT_R
- help
- The RK3368-uQ7 is a micro-Qseven form-factor (40mm x 70mm, - MXM-230 connector) system-on-module designed by Theobroma - Systems for industrial applications.arch/arm/mach-rockchip/rk3368/Kconfig +0
-14- - It provides the following features: - - 8x Cortex-A53 (in 2 clusters of 4 cores each) - - (on-module) up to 4GB of DDR3 memory - - (on-module) SPI-NOR flash - - (on-module) eMMC - - Gigabit Ethernet (with an on-module KSZ9031 PHY) - - USB - - HDMI - - MIPI-DSI/single-channel LVDS (muxed on the 'LVDS-A' pin-group) - - various 'slow' interfaces (e.g. UART, SPI, I2C, I2S, ...) - - on-module STM32 providing CAN, RTC and fan-control - - (optional on-module) EAL4+-certified security module -config
TARGET_SHEEP
bool "Sheep board"
helparch/arm/mach-rockchip/rk3368/Kconfig +0
-0@@ -62,7 +41,6 @@ config SPL_LIBCOMMON_SUPPORTconfig
SPL_LIBGENERIC_SUPPORT
default y
-source "board/theobroma-systems/lion_rk3368/Kconfig" source "board/rockchip/sheep_rk3368/Kconfig" source "board/geekbuying/geekbox/Kconfig" source "board/rockchip/evb_px5/Kconfig"board/theobroma-systems/lion_rk3368/Kconfig deleted +0
-18@@ -1,18 +0,0 @@ -if TARGET_LION_RK3368 - -config SYS_BOARD - default "lion_rk3368" - -config SYS_VENDOR - default "theobroma-systems" - -config SYS_CONFIG_NAME - default "lion_rk3368" - -config ENV_SIZE - default 0x2000 - -config ENV_OFFSET - default 0x3c000 if ENV_IS_IN_SPI_FLASH - -endifboard/theobroma-systems/lion_rk3368/MAINTAINERS deleted +0
-10@@ -1,10 +0,0 @@ -LION-RK3368 (RK3368-uQ7 system-on-module) -M: Quentin Schulz <[email protected]> -M: Klaus Goger <[email protected]> -S: Maintained -F: board/theobroma-systems/lion_rk3368 -F: include/configs/lion_rk3368.h -F: arch/arm/dts/rk3368-lion.dts -F: configs/lion-rk3368_defconfig -W: https://www.theobroma-systems.com/rk3368-uq7/tech-specs -T: git git://git.theobroma-systems.com/lion-u-boot.gitboard/theobroma-systems/lion_rk3368/README deleted +0
-42@@ -1,78 +0,0 @@ -Here is the step-by-step to boot to U-Boot on RK3368-uQ7 - -Get the Source and build ATF -============================ - - > git clone git://git.theobroma-systems.com/arm-trusted-firmware.git - > cd arm-trusted-firmware - > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3368 bl31 - > cp build/rk3368/release/bl31.bin ../u-boot/bl31-rk3368.bin - -Configure U-Boot -================ - - > cd ../u-boot - > make lion-rk3368_defconfig - -Build the TPL/SPL stage -======================= - - > make CROSS_COMPILE=aarch64-unknown-elf- - -Build the full U-Boot and a FIT image including the ATF -======================================================= - - > make CROSS_COMPILE=aarch64-unknown-elf- u-boot.itb - -Flash the image -=============== - -Copy the SPL to offset 32k and the FIT image containing the payloads -(U-Boot proper, ATF, devicetree) to offset 256k card. - -SD-Card -------- - - > dd if=idbloader.img of=/dev/sdb seek=64 - > dd if=u-boot.itb of=/dev/sdb seek=512 - -eMMC ----- - -rkdeveloptool allows to flash the on-board eMMC via the USB OTGinterface with
board/theobroma-systems/lion_rk3368/README deleted +0
-34-help of the Rockchip loader binary. - - > git clone https://github.com/rockchip-linux/rkdeveloptool - > cd rkdeveloptool - > autoreconf -i && && ./configure && make - > git clone https://github.com/rockchip-linux/rkbin.git - > ./rkdeveloptool db rkbin/rk33/rk3368_loader_v2.00.256.bin - > ./rkdeveloptool wl 64 ../spl.img - > ./rkdeveloptool wl 512 ../u-boot.itb - - -If everything went according to plan, you should see the following -output on UART0: - -<debug_uart> U-Boot TPL board init -Trying to boot from BOOTROM -Returning to boot ROM... -Trying to boot from MMC1 -NOTICE: BL31: v1.3(release):v1.2-1320-gbf43a443 -NOTICE: BL31: Built : 18:04:47, Jul 5 2017 - - -U-Boot 2017.07-00158-g2395e99858 (Jul 18 2017 - 21:03:31 +0200) - -Model: Theobroma Systems RK3368-uQ7 SoM -DRAM: 2 GiB -MMC: dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0 -Using default environment - -In: serial@ff180000 -Out: serial@ff180000 -Err: serial@ff180000 -Net: -Warning: ethernet@ff290000 (eth0) using random MAC address -d2:69:35:7e:d0:1e
board/theobroma-systems/lion_rk3368/README deleted +0
-2-eth0: ethernet@ff290000 -Hit any key to stop autoboot: 2configs/lion-rk3368_defconfig deleted +0
-110@@ -1,110 +0,0 @@ -CONFIG_ARM=y -CONFIG_SKIP_LOWLEVEL_INIT=y -CONFIG_COUNTER_FREQUENCY=24000000 -CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00200000 -CONFIG_NR_DRAM_BANKS=1 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 -CONFIG_ENV_OFFSET=0x3F8000 -CONFIG_DEFAULT_DEVICE_TREE="rk3368-lion-haikou" -CONFIG_SPL_TEXT_BASE=0x00000000 -CONFIG_ROCKCHIP_RK3368=y -CONFIG_TPL_LIBCOMMON_SUPPORT=y -CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x188000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x400000 -CONFIG_SPL_BSS_MAX_SIZE=0x20000 -CONFIG_SPL_STACK_R=y -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xFF180000 -CONFIG_DEBUG_UART_CLOCK=24000000 -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI=y -CONFIG_SYS_LOAD_ADDR=0x800800 -CONFIG_DEBUG_UART=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -CONFIG_BOOTSTAGE=y -CONFIG_SPL_BOOTSTAGE=y -CONFIG_BOOTSTAGE_REPORT=y -CONFIG_BOOTSTAGE_FDT=y -CONFIG_DEFAULT_FDT_FILE="rockchip/rk3368-lion-haikou.dtb" -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_MAX_SIZE=0x40000 -CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_BOOTROM_SUPPORT=y -# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 -CONFIG_SPL_ATF=y -CONFIG_TPL=y -CONFIG_TPL_SYS_MALLOC_SIMPLE=y -CONFIG_TPL_DRIVERS_MISC=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -CONFIG_CMD_BOOTSTAGE=y -CONFIG_CMD_REGULATOR=y -CONFIG_CMD_MTDPARTS=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_TPL_OF_CONTROL=y -CONFIG_OF_LIVE=y -CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent" -CONFIG_TPL_OF_PLATDATA=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_TPL_DM=y -CONFIG_REGMAP=y -CONFIG_SPL_REGMAP=y -CONFIG_TPL_REGMAP=y -CONFIG_SYSCON=y -CONFIG_SPL_SYSCON=y -CONFIG_TPL_SYSCON=y -CONFIG_CLK=y -CONFIG_SPL_CLK=y -CONFIG_TPL_CLK=y -CONFIG_ROCKCHIP_GPIO=y -CONFIG_SYS_I2C_ROCKCHIP=y -CONFIG_MMC_DW=y -CONFIG_MMC_DW_ROCKCHIP=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_PHY_ANEG_TIMEOUT=8000 -CONFIG_PHY_MSCC=y -CONFIG_DM_ETH_PHY=y -CONFIG_ETH_DESIGNWARE=y -CONFIG_RGMII=y -CONFIG_GMAC_ROCKCHIP=y -CONFIG_PINCTRL=y -CONFIG_SPL_PINCTRL=y -CONFIG_DM_PMIC=y -CONFIG_PMIC_RK8XX=y -CONFIG_DM_REGULATOR_FIXED=y -CONFIG_REGULATOR_RK8XX=y -CONFIG_RAM=y -CONFIG_SPL_RAM=y -CONFIG_TPL_RAM=y -CONFIG_DEBUG_UART_SHIFT=2 -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_SYS_NS16550_MEM32=y -CONFIG_ROCKCHIP_SPI=y -CONFIG_SYSINFO=y -CONFIG_SYSINFO_SMBIOS=y -CONFIG_SYSRESET=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_GENERIC=y -CONFIG_USB_DWC2=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DWC2_OTG=y -CONFIG_SPL_TINY_MEMSET=y -CONFIG_LZO=y -CONFIG_ERRNO_STR=ydoc/board/rockchip/rockchip.rst +0
-1@@ -72,7 +72,6 @@ List of mainline supported Rockchip boards: - GeekBox (geekbox) - PX5 EVB (evb-px5) - Rockchip Sheep (sheep-rk3368) - - Theobroma Systems RK3368-uQ7 SoM - Lion (lion-rk3368) * rk3399 - 96boards RK3399 Ficus (ficus-rk3399) - 96boards Rock960 (rock960-rk3399)include/configs/lion_rk3368.h deleted +0
-16@@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH -*/ - -#ifndef __CONFIGS_LION_RK3368_H -#define __CONFIGS_LION_RK3368_H - -#include <configs/rk3368_common.h> - -#define KERNEL_LOAD_ADDR 0x280000 -#define DTB_LOAD_ADDR 0x5600000 -#define INITRD_LOAD_ADDR 0x5bf0000 -/* PHY needs longer aneg time at 1G */ - -#endif