Skip to contentSkip to conversation

Allow inlining of --auth-user-pass

PATCH Superseded Davide Brini 2 participants 5 messages Oct 2, 2013 – Oct 5, 2013

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Allow inlining of --auth-user-pass

This patch allows inlining of the --auth-user-pass directive, so it is now possible to do

<auth-user-pass>
myusername
mypassword
</auth-user-pass>

or supply just the username, eg

<auth-user-pass>
myusername
</auth-user-pass>

(in this case the user is prompted for the password only).
The most changed files are options.c (sanity check of inlined credentials) and ssl.c (actual parsing of the inlined credentials).

Udates to the documentation will be provided in a separate patch if and when the present patch is accepted.

As discussed on IRC, for the time being the non-inlined syntax

auth-user-pass [up]

is still supported and [up] is expected to contain username and password on two lines.

---
 src/openvpn/init.c    |    9 +++--
 src/openvpn/misc.c    |    2 +-
 src/openvpn/options.c |   56 ++++++++++++++++++++++++----
 src/openvpn/options.h |    2 +
 src/openvpn/ssl.c     |   98 +++++++++++++++++++++++++++++++++++++------------
 src/openvpn/ssl.h     |    2 +-
 6 files changed, 134 insertions(+), 35 deletions(-)
src/openvpn/init.c +6 -3
index 031fb20..1ec2d6e 100644
@@ -400,12 +400,15 @@ init_query_passwords (struct context *c)
   
 #if P2MP
   /* Auth user/pass input */
-  if (c->options.auth_user_pass_file)
+  if (c->options.auth_user_pass_file || c->options.auth_user_pass_file_inline)
     {
+
+     printf("---------- init_query_passwords\n");
+
 #ifdef ENABLE_CLIENT_CR
-      auth_user_pass_setup (c->options.auth_user_pass_file, &c->options.sc_info);
+      auth_user_pass_setup (c->options.auth_user_pass_file, c->options.auth_user_pass_file_inline, &c->options.sc_info);
 #else
-      auth_user_pass_setup (c->options.auth_user_pass_file, NULL);
+      auth_user_pass_setup (c->options.auth_user_pass_file, c->options.auth_user_pass_file_inline, NULL);
 #endif
     }
 #endif
src/openvpn/misc.c +1 -1
index 4688444..05bc2f0 100644
@@ -1036,7 +1036,7 @@ get_user_pass_cr (struct user_pass *up,
 
   if (!up->defined)
     {
-      const bool from_stdin = (!auth_file || !strcmp (auth_file, "stdin"));
+      const bool from_stdin = (!auth_file || streq (auth_file, "stdin"));
 
       if (flags & GET_USER_PASS_PREVIOUS_CREDS_FAILED)
 	msg (M_WARN, "Note: previous '%s' credentials failed", prefix);
src/openvpn/options.c +49 -7

99 lines not on this page · raw message

src/openvpn/options.h +2 -0
index 8e0e367..5ae733a 100644
@@ -292,6 +292,7 @@ struct options
   bool up_delay;
   bool up_restart;
   bool daemon;
+  bool auth_nocache;
 
   int remap_sigusr1;
 
@@ -460,6 +461,7 @@ struct options
   bool pull; /* client pull of config options from server */
   int push_continuation;
   const char *auth_user_pass_file;
+  const char *auth_user_pass_file_inline;
   struct options_pre_pull *pre_pull;
 
   int server_poll_timeout;
src/openvpn/ssl.c +75 -23

120 lines not on this page · raw message

src/openvpn/ssl.h +1 -1
index cd7cae2..c7554aa 100644
@@ -388,7 +388,7 @@ void pem_password_setup (const char *auth_file);
  * Setup authentication username and password. If auth_file is given, use the
  * credentials stored in the file.
  */
-void auth_user_pass_setup (const char *auth_file, const struct static_challenge_info *sc_info);
+void auth_user_pass_setup (const char *auth_file, const char *auth_file_inline, const struct static_challenge_info *sc_info);
 
 /*
  * Ensure that no caching is performed on authentication information

--
1.7.10.4

 src/openvpn/init.c    |    9 +++--
 src/openvpn/misc.c    |    2 +-
 src/openvpn/options.c |   56 ++++++++++++++++++++++++----
 src/openvpn/options.h |    2 +
 src/openvpn/ssl.c     |   98 +++++++++++++++++++++++++++++++++++++------------
 src/openvpn/ssl.h     |    2 +-
 6 files changed, 134 insertions(+), 35 deletions(-)
src/openvpn/init.c +6 -3
index 031fb20..1ec2d6e 100644
@@ -400,12 +400,15 @@ init_query_passwords (struct context *c)
   
 #if P2MP
   /* Auth user/pass input */
-  if (c->options.auth_user_pass_file)
+  if (c->options.auth_user_pass_file || c->options.auth_user_pass_file_inline)
     {
+
+     printf("---------- init_query_passwords\n");
+
 #ifdef ENABLE_CLIENT_CR
-      auth_user_pass_setup (c->options.auth_user_pass_file, &c->options.sc_info);
+      auth_user_pass_setup (c->options.auth_user_pass_file, c->options.auth_user_pass_file_inline, &c->options.sc_info);
 #else
-      auth_user_pass_setup (c->options.auth_user_pass_file, NULL);
+      auth_user_pass_setup (c->options.auth_user_pass_file, c->options.auth_user_pass_file_inline, NULL);
 #endif
     }
 #endif
src/openvpn/misc.c +1 -1
index 4688444..05bc2f0 100644
@@ -1036,7 +1036,7 @@ get_user_pass_cr (struct user_pass *up,
 
   if (!up->defined)
     {
-      const bool from_stdin = (!auth_file || !strcmp (auth_file, "stdin"));
+      const bool from_stdin = (!auth_file || streq (auth_file, "stdin"));
 
       if (flags & GET_USER_PASS_PREVIOUS_CREDS_FAILED)
 	msg (M_WARN, "Note: previous '%s' credentials failed", prefix);
src/openvpn/options.c +49 -7

99 lines not on this page · raw message

src/openvpn/options.h +2 -0
index 8e0e367..5ae733a 100644
@@ -292,6 +292,7 @@ struct options
   bool up_delay;
   bool up_restart;
   bool daemon;
+  bool auth_nocache;
 
   int remap_sigusr1;
 
@@ -460,6 +461,7 @@ struct options
   bool pull; /* client pull of config options from server */
   int push_continuation;
   const char *auth_user_pass_file;
+  const char *auth_user_pass_file_inline;
   struct options_pre_pull *pre_pull;
 
   int server_poll_timeout;
src/openvpn/ssl.c +75 -23

120 lines not on this page · raw message

src/openvpn/ssl.h +1 -1
index cd7cae2..c7554aa 100644
@@ -388,7 +388,7 @@ void pem_password_setup (const char *auth_file);
  * Setup authentication username and password. If auth_file is given, use the
  * credentials stored in the file.
  */
-void auth_user_pass_setup (const char *auth_file, const struct static_challenge_info *sc_info);
+void auth_user_pass_setup (const char *auth_file, const char *auth_file_inline, const struct static_challenge_info *sc_info);
 
 /*
  * Ensure that no caching is performed on authentication information
#1 lore raw

(previous version contained a leftover debug line left by mistake, sorry)

This patch allows inlining of the --auth-user-pass directive, so it is now possible to do

<auth-user-pass>
myusername
mypassword
</auth-user-pass>

or supply just the username, eg

<auth-user-pass>
myusername
</auth-user-pass>

(in this case the user is prompted for the password only).
The most changed files are options.c (sanity check of inlined credentials) and ssl.c (actual parsing of the inlined credentials).

Udates to the documentation will be provided in a separate patch if and when the present patch is accepted.

As discussed on IRC, for the time being the non-inlined syntax

auth-user-pass [up]

is still supported and [up] is expected to contain username and password on two lines.

---
 src/openvpn/init.c    |    6 +--
 src/openvpn/misc.c    |    2 +-
 src/openvpn/options.c |   56 ++++++++++++++++++++++++----
 src/openvpn/options.h |    2 +
 src/openvpn/ssl.c     |   98 +++++++++++++++++++++++++++++++++++++------------
 src/openvpn/ssl.h     |    2 +-
 6 files changed, 131 insertions(+), 35 deletions(-)
src/openvpn/init.c +3 -3
index 031fb20..b11ae8a 100644
@@ -400,12 +400,12 @@ init_query_passwords (struct context *c)
   
 #if P2MP
   /* Auth user/pass input */
-  if (c->options.auth_user_pass_file)
+  if (c->options.auth_user_pass_file || c->options.auth_user_pass_file_inline)
     {
 #ifdef ENABLE_CLIENT_CR
-      auth_user_pass_setup (c->options.auth_user_pass_file, &c->options.sc_info);
+      auth_user_pass_setup (c->options.auth_user_pass_file, c->options.auth_user_pass_file_inline, &c->options.sc_info);
 #else
-      auth_user_pass_setup (c->options.auth_user_pass_file, NULL);
+      auth_user_pass_setup (c->options.auth_user_pass_file, c->options.auth_user_pass_file_inline, NULL);
 #endif
     }
 #endif
src/openvpn/misc.c +1 -1
index 4688444..05bc2f0 100644
@@ -1036,7 +1036,7 @@ get_user_pass_cr (struct user_pass *up,
 
   if (!up->defined)
     {
-      const bool from_stdin = (!auth_file || !strcmp (auth_file, "stdin"));
+      const bool from_stdin = (!auth_file || streq (auth_file, "stdin"));
 
       if (flags & GET_USER_PASS_PREVIOUS_CREDS_FAILED)
 	msg (M_WARN, "Note: previous '%s' credentials failed", prefix);
src/openvpn/options.c +49 -7

99 lines not on this page · raw message

src/openvpn/options.h +2 -0
index 8e0e367..5ae733a 100644
@@ -292,6 +292,7 @@ struct options
   bool up_delay;
   bool up_restart;
   bool daemon;
+  bool auth_nocache;
 
   int remap_sigusr1;
 
@@ -460,6 +461,7 @@ struct options
   bool pull; /* client pull of config options from server */
   int push_continuation;
   const char *auth_user_pass_file;
+  const char *auth_user_pass_file_inline;
   struct options_pre_pull *pre_pull;
 
   int server_poll_timeout;
src/openvpn/ssl.c +75 -23

120 lines not on this page · raw message

src/openvpn/ssl.h +1 -1
index cd7cae2..c7554aa 100644
@@ -388,7 +388,7 @@ void pem_password_setup (const char *auth_file);
  * Setup authentication username and password. If auth_file is given, use the
  * credentials stored in the file.
  */
-void auth_user_pass_setup (const char *auth_file, const struct static_challenge_info *sc_info);
+void auth_user_pass_setup (const char *auth_file, const char *auth_file_inline, const struct static_challenge_info *sc_info);
 
 /*
  * Ensure that no caching is performed on authentication information
Signature · 1 line
1.7.10.4
 src/openvpn/init.c    |    6 +--
 src/openvpn/misc.c    |    2 +-
 src/openvpn/options.c |   56 ++++++++++++++++++++++++----
 src/openvpn/options.h |    2 +
 src/openvpn/ssl.c     |   98 +++++++++++++++++++++++++++++++++++++------------
 src/openvpn/ssl.h     |    2 +-
 6 files changed, 131 insertions(+), 35 deletions(-)
src/openvpn/init.c +3 -3
index 031fb20..b11ae8a 100644
@@ -400,12 +400,12 @@ init_query_passwords (struct context *c)
   
 #if P2MP
   /* Auth user/pass input */
-  if (c->options.auth_user_pass_file)
+  if (c->options.auth_user_pass_file || c->options.auth_user_pass_file_inline)
     {
 #ifdef ENABLE_CLIENT_CR
-      auth_user_pass_setup (c->options.auth_user_pass_file, &c->options.sc_info);
+      auth_user_pass_setup (c->options.auth_user_pass_file, c->options.auth_user_pass_file_inline, &c->options.sc_info);
 #else
-      auth_user_pass_setup (c->options.auth_user_pass_file, NULL);
+      auth_user_pass_setup (c->options.auth_user_pass_file, c->options.auth_user_pass_file_inline, NULL);
 #endif
     }
 #endif
src/openvpn/misc.c +1 -1
index 4688444..05bc2f0 100644
@@ -1036,7 +1036,7 @@ get_user_pass_cr (struct user_pass *up,
 
   if (!up->defined)
     {
-      const bool from_stdin = (!auth_file || !strcmp (auth_file, "stdin"));
+      const bool from_stdin = (!auth_file || streq (auth_file, "stdin"));
 
       if (flags & GET_USER_PASS_PREVIOUS_CREDS_FAILED)
 	msg (M_WARN, "Note: previous '%s' credentials failed", prefix);
src/openvpn/options.c +49 -7

99 lines not on this page · raw message

src/openvpn/options.h +2 -0
index 8e0e367..5ae733a 100644
@@ -292,6 +292,7 @@ struct options
   bool up_delay;
   bool up_restart;
   bool daemon;
+  bool auth_nocache;
 
   int remap_sigusr1;
 
@@ -460,6 +461,7 @@ struct options
   bool pull; /* client pull of config options from server */
   int push_continuation;
   const char *auth_user_pass_file;
+  const char *auth_user_pass_file_inline;
   struct options_pre_pull *pre_pull;
 
   int server_poll_timeout;
src/openvpn/ssl.c +75 -23

120 lines not on this page · raw message

src/openvpn/ssl.h +1 -1
index cd7cae2..c7554aa 100644
@@ -388,7 +388,7 @@ void pem_password_setup (const char *auth_file);
  * Setup authentication username and password. If auth_file is given, use the
  * credentials stored in the file.
  */
-void auth_user_pass_setup (const char *auth_file, const struct static_challenge_info *sc_info);
+void auth_user_pass_setup (const char *auth_file, const char *auth_file_inline, const struct static_challenge_info *sc_info);
 
 /*
  * Ensure that no caching is performed on authentication information
#2 lore raw

Hi Davide,   nice idea. But I think I found two small bugs: First, it won't compile in a config w/o ENABLE_CLIENT_CR defined (there is no "sc_info").
Second, if I'm not mistaken, name and password are not copied correctly:
If # of charachters is (pos - prev), the last charakter is at [pos - prev -1] and to terminate the string you should set [pos - prev] to '\0'.   My suggestion (not sure, if the first one works with management enabled, only tested w/o).     Fix in src/openvpn/misc.c (add #ifdef):
[...]
+
+  if ( ( !streq(options->auth_user_pass_file, "stdin") || options->auth_user_pass_file_inline) && options->auth_nocache)
+    msg (M_USAGE, "Cannot use --auth-nocache with credentials from file");
+
+#ifdef ENABLE_CLIENT_CR
+  if ( ( !streq(options->auth_user_pass_file, "stdin") || options->auth_user_pass_file_inline) && options->sc_info.challenge_text)
+    msg (M_USAGE, "Credentials cannot be in a file if using --static-challenge");
+#endif
+
+  if (options->auth_user_pass_file_inline)
+    {
+      int n_inlined = 0;
[...]    in src/openvpn/ssl.c yo should use [pos - prev] instead of [pos - prev +1]
[...]
+                {
+                  strncpy(inlined_username, prev, pos - prev);
+                  inlined_username[pos - prev] = '\0';
+                  msg (M_INFO, "Using inlined username: %s (POS=%d PREV=%d)", inlined_username, pos, prev);
+                }
+              else
+                {
+                  strncpy(inlined_password, prev, pos - prev);
+                  inlined_password[pos - prev] = '\0';
+                  msg (M_INFO, "Using inlined password: ...**%s**",inlined_password);
+                }
[...]
I hope it's o.k. just to give the idea but not post full patches again.
Regards  Joerg
      Gesendet: Donnerstag, 03. Oktober 2013 um 10:30 Uhr
Von: "Davide Brini" <[email protected]...>
An: [email protected]
Betreff: Re: [Openvpn-devel] [PATCH] Allow inlining of --auth-user-pass (previous version contained a leftover debug line left by mistake, sorry)

This patch allows inlining of the --auth-user-pass directive, so it is now possible to do

<auth-user-pass>
myusername
mypassword
</auth-user-pass>

or supply just the username, eg

<auth-user-pass>
myusername
</auth-user-pass>

(in this case the user is prompted for the password only).
The most changed files are options.c (sanity check of inlined credentials) and ssl.c (actual parsing of the inlined credentials).

Udates to the documentation will be provided in a separate patch if and when the present patch is accepted.

As discussed on IRC, for the time being the non-inlined syntax

auth-user-pass [up]

is still supported and [up] is expected to contain username and password on two lines.

---
src/openvpn/init.c | 6 +--
src/openvpn/misc.c | 2 +-
src/openvpn/options.c | 56 ++++++++++++++++++++++++---- src/openvpn/options.h | 2 +
src/openvpn/ssl.c | 98 +++++++++++++++++++++++++++++++++++++------------ src/openvpn/ssl.h | 2 +-

6 files changed, 131 insertions(+), 35 deletions(-)
src/openvpn/init.c +0 -0
index 031fb20..b11ae8a 100644
@@ -400,12 +400,12 @@ init_query_passwords (struct context *c)
 

#if P2MP
/* Auth user/pass input */
- if (c->options.auth_user_pass_file)
+ if (c->options.auth_user_pass_file || c->options.auth_user_pass_file_inline)
{
#ifdef ENABLE_CLIENT_CR
- auth_user_pass_setup (c->options.auth_user_pass_file, &c->options.sc_info);
+ auth_user_pass_setup (c->options.auth_user_pass_file, c->options.auth_user_pass_file_inline, &c->options.sc_info); #else
- auth_user_pass_setup (c->options.auth_user_pass_file, NULL);
+ auth_user_pass_setup (c->options.auth_user_pass_file, c->options.auth_user_pass_file_inline, NULL); #endif
}
#endif

src/openvpn/misc.c +0 -0
index 4688444..05bc2f0 100644
@@ -1036,7 +1036,7 @@ get_user_pass_cr (struct user_pass *up,
 

if (!up->defined)
{

- const bool from_stdin = (!auth_file || !strcmp (auth_file, "stdin"));
+ const bool from_stdin = (!auth_file || streq (auth_file, "stdin"));

if (flags & GET_USER_PASS_PREVIOUS_CREDS_FAILED)
msg (M_WARN, "Note: previous '%s' credentials failed", prefix);

src/openvpn/options.c +0 -0
index 4d0271f..6f2ea66 100644
@@ -1233,6 +1233,7 @@ show_p2mp_parms (const struct options *o)

SHOW_BOOL (client);
SHOW_BOOL (pull);
SHOW_STR (auth_user_pass_file);
+ SHOW_STR (auth_user_pass_file_inline);

gc_free (&gc);
}
@@ -2080,7 +2081,7 @@ options_postprocess_verify_ce (const struct options *options, const struct conne if (options->ifconfig_ipv6_local && !options->tun_ipv6 )
msg (M_INFO, "Warning: --ifconfig-ipv6 without --tun-ipv6 will not do IPv6");

- if (options->auth_user_pass_file)
+ if ( options->auth_user_pass_file || options->auth_user_pass_file_inline )
msg (M_USAGE, "--auth-user-pass cannot be used with --mode server (it should be used on the client side only)"); if (options->ccd_exclusive && !options->client_config_dir)
msg (M_USAGE, "--ccd-exclusive must be used with --client-config-dir");
@@ -2274,7 +2275,7 @@ options_postprocess_verify_ce (const struct options *options, const struct conne
if (sum == 0)
{
#if P2MP
- if (!options->auth_user_pass_file)
+ if (!options->auth_user_pass_file && !options->auth_user_pass_file_inline)
#endif
msg (M_USAGE, "No client-side authentication method is specified. You must use either --cert/--key, --pkcs12, or --auth-user-pass");
}
@@ -2350,8 +2351,42 @@ options_postprocess_verify_ce (const struct options *options, const struct conne
#endif /* ENABLE_SSL */

#if P2MP
- if (options->auth_user_pass_file && !options->pull)
+ if ( ( options->auth_user_pass_file || options->auth_user_pass_file_inline) && !options->pull)
msg (M_USAGE, "--auth-user-pass requires --pull");
+
+ if ( ( !streq(options->auth_user_pass_file, "stdin") || options->auth_user_pass_file_inline) && options->auth_nocache)
+ msg (M_USAGE, "Cannot use --auth-nocache with credentials from file");
+
+ if ( ( !streq(options->auth_user_pass_file, "stdin") || options->auth_user_pass_file_inline) && options->sc_info.challenge_text)
+ msg (M_USAGE, "Credentials cannot be in a file if using --static-challenge");
+
+ if (options->auth_user_pass_file_inline)
+ {
+ int n_inlined = 0;
+ const char *pos = options->auth_user_pass_file_inline;
+ const char *prev = pos;
+
+ if ( strlen(pos) == 0 )
+ msg (M_USAGE, "Invalid format for inlined --auth-user-pass");
+
+ while( (pos = strchr(pos, '\n')) != NULL )
+ {
+ n_inlined++;
+
+ if (n_inlined > 2)
+ msg (M_USAGE, "Too many lines in inlined --auth-user-pass");
+
+ if ( pos - prev > USER_PASS_LEN - 1 )
+ msg (M_USAGE, "Line too long in inlined --auth-user-pass");
+
+ pos++;
+ prev = pos;
+ }
+
+ if ( (n_inlined == 0) || (*prev != '\0') )
+ msg (M_USAGE, "Invalid format for inlined --auth-user-pass");
+
+ }
#endif

uninit_options (&defaults);
@@ -2719,9 +2754,10 @@ options_postprocess_filechecks (struct options *options) "--management user/password file");
#endif /* ENABLE_MANAGEMENT */
#if P2MP
- errs |= check_file_access (CHKACC_FILE|CHKACC_ACPTSTDIN,
- options->auth_user_pass_file, R_OK,
- "--auth-user-pass");
+ if (!streq(options->auth_user_pass_file, INLINE_FILE_TAG))
+ errs |= check_file_access (CHKACC_FILE|CHKACC_ACPTSTDIN,
+ options->auth_user_pass_file, R_OK,
+ "--auth-user-pass");
#endif /* P2MP */

/* ** System related ** */
@@ -5894,7 +5930,12 @@ add_option (struct options *options, VERIFY_PERMISSION (OPT_P_GENERAL);
if (p[1])
{
- options->auth_user_pass_file = p[1];
+ options->auth_user_pass_file = p[1];
+ if (streq (p[1], INLINE_FILE_TAG) && p[2])
+ {
+ options->auth_user_pass_file = "stdin";
+ options->auth_user_pass_file_inline = p[2];
+ }
}
else
options->auth_user_pass_file = "stdin";
@@ -6591,6 +6632,7 @@ add_option (struct options *options, else if (streq (p[0], "auth-nocache"))
{
VERIFY_PERMISSION (OPT_P_GENERAL);
+ options->auth_nocache = true; ssl_set_auth_nocache ();
}
else if (streq (p[0], "auth-token") && p[1])

src/openvpn/options.h +0 -0
index 8e0e367..5ae733a 100644
@@ -292,6 +292,7 @@ struct options

bool up_delay;
bool up_restart;
bool daemon;
+ bool auth_nocache;

int remap_sigusr1;

@@ -460,6 +461,7 @@ struct options
bool pull; /* client pull of config options from server */ int push_continuation;
const char *auth_user_pass_file;
+ const char *auth_user_pass_file_inline;
struct options_pre_pull *pre_pull;

int server_poll_timeout;

src/openvpn/ssl.c +5 -1
index 69f77f3..aa249f1 100644
@@ -354,36 +354,88 @@ static char *auth_challenge; /* GLOBAL */
 #endif
 
 void
-auth_user_pass_setup (const char *auth_file, const struct static_challenge_info *sci)
+auth_user_pass_setup (const char *auth_file, const char *auth_file_inline, const struct static_challenge_info *sci)
 {
 +
+ int extra_flags = 0;
+ int n_inlined = 0;
+ char inlined_username[USER_PASS_LEN];
+ char inlined_password[USER_PASS_LEN];
 +

auth_user_pass_enabled = true;
+
if (!auth_user_pass.defined)
{
+ if (auth_file && streq (auth_file, "stdin") && auth_file_inline)
+ {
+ /* check how much is inlined. */
+ const char *pos = auth_file_inline;
+ const char *prev = pos;
+
+ while( (pos = strchr(pos, '\n')) != NULL)
+ {
+ n_inlined++;
+
+ if (n_inlined == 1)
+ {
+ strncpy(inlined_username, prev, pos - prev);
+ inlined_username[pos - prev + 1] = '\0';
+ msg (M_INFO, "Using inlined username: %s", inlined_username);
+ }
+ else
+ {
+ strncpy(inlined_password, prev, pos - prev);
+ inlined_password[pos - prev + 1] = '\0';
+ msg (M_INFO, "Using inlined password: ...");
+ }
+
+ pos++;
+ prev = pos;
+ }
+
+ if (n_inlined == 1)
+ extra_flags = GET_USER_PASS_PASSWORD_ONLY;
+ }
+
+ if (n_inlined == 2)
+ {
+ strcpy(auth_user_pass.username, inlined_username);
+ strcpy(auth_user_pass.password, inlined_password);
+ auth_user_pass.defined = true;
+ }
+ else
+ {
#if AUTO_USERID
- get_user_pass_auto_userid (&auth_user_pass, auth_file);
+ get_user_pass_auto_userid (&auth_user_pass, auth_file); #else

# ifdef ENABLE_CLIENT_CR
- if (auth_challenge) /* dynamic challenge/response */
- get_user_pass_cr (&auth_user_pass,
- auth_file,
- UP_TYPE_AUTH,
- GET_USER_PASS_MANAGEMENT|GET_USER_PASS_SENSITIVE|GET_USER_PASS_DYNAMIC_CHALLENGE,
- auth_challenge);
- else if (sci) /* static challenge response */
- {
- int flags = GET_USER_PASS_MANAGEMENT|GET_USER_PASS_SENSITIVE|GET_USER_PASS_STATIC_CHALLENGE;
- if (sci->flags & SC_ECHO)
- flags |= GET_USER_PASS_STATIC_CHALLENGE_ECHO;
- get_user_pass_cr (&auth_user_pass,
- auth_file,
- UP_TYPE_AUTH,
- flags,
- sci->challenge_text);
- }
- else
+ if (auth_challenge) /* dynamic challenge/response */
+ get_user_pass_cr (&auth_user_pass,
+ auth_file,
+ UP_TYPE_AUTH,
+ GET_USER_PASS_MANAGEMENT|GET_USER_PASS_SENSITIVE|GET_USER_PASS_DYNAMIC_CHALLENGE|extra_flags,
+ auth_challenge);
+ else if (sci) /* static challenge response */
+ {
+ int flags = GET_USER_PASS_MANAGEMENT|GET_USER_PASS_SENSITIVE|GET_USER_PASS_STATIC_CHALLENGE|extra_flags;
+ if (sci->flags & SC_ECHO)
+ flags |= GET_USER_PASS_STATIC_CHALLENGE_ECHO;
 +
+ get_user_pass_cr (&auth_user_pass,
+ auth_file,
+ UP_TYPE_AUTH,
+ flags,
+ sci->challenge_text);
+ }
+ else
# endif
- get_user_pass (&auth_user_pass, auth_file, UP_TYPE_AUTH, GET_USER_PASS_MANAGEMENT|GET_USER_PASS_SENSITIVE);
+ get_user_pass (&auth_user_pass, auth_file, UP_TYPE_AUTH, GET_USER_PASS_MANAGEMENT|GET_USER_PASS_SENSITIVE|extra_flags);
 #endif
+ }
 +
+ if (n_inlined == 1)
+ strcpy(auth_user_pass.username, inlined_username);
 +
 }
 }

@@ -1892,9 +1944,9 @@ key_method_2_write (struct buffer *buf, struct tls_session *session) if (auth_user_pass_enabled)
{
#ifdef ENABLE_CLIENT_CR
- auth_user_pass_setup (NULL, session->opt->sci);
+ auth_user_pass_setup (NULL, NULL, session->opt->sci);
#else
- auth_user_pass_setup (NULL, NULL);
+ auth_user_pass_setup (NULL, NULL, NULL);
#endif
if (!write_string (buf, auth_user_pass.username, -1))
goto error;

src/openvpn/ssl.h +0 -0
index cd7cae2..c7554aa 100644
@@ -388,7 +388,7 @@ void pem_password_setup (const char *auth_file);

* Setup authentication username and password. If auth_file is given, use the
* credentials stored in the file.
*/
-void auth_user_pass_setup (const char *auth_file, const struct static_challenge_info *sc_info);
+void auth_user_pass_setup (const char *auth_file, const char *auth_file_inline, const struct static_challenge_info *sc_info);

/*
* Ensure that no caching is performed on authentication information
-- 1.7.10.4------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk_______________________________________________
Openvpn-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openvpn-devel

#3 lore raw

oops, just took my "debug" version of src/openvpn/ssl.c ...

Of course output of string length and especially password in log file is not intended ;-)

Joerg

-------- Original-Nachricht --------
Betreff: Re: [Openvpn-devel] [PATCH] Allow inlining of --auth-user-pass
Von: [email protected]...
An: Davide Brini <[email protected]...>
Kopie (CC): [email protected]
Datum: Sa 05 Okt 2013 15:48:42 CEST

Quoted 440 lines

Hi Davide,
nice idea. But I think I found two small bugs:
First, it won't compile in a config w/o ENABLE_CLIENT_CR defined (there is no "sc_info").
Second, if I'm not mistaken, name and password are not copied correctly:
If # of charachters is (pos - prev), the last charakter is at [pos - prev -1] and to terminate the string you should set [pos - prev] to '\0'. My suggestion (not sure, if the first one works with management enabled, only tested w/o).
Fix in src/openvpn/misc.c (add #ifdef):
[...]

(quoted diff) +2 -0
+
+  if ( ( !streq(options->auth_user_pass_file, "stdin") || 

options->auth_user_pass_file_inline) && options->auth_nocache)

(quoted diff) +4 -0
+    msg (M_USAGE, "Cannot use --auth-nocache with credentials from file");
+
+#ifdef ENABLE_CLIENT_CR
+  if ( ( !streq(options->auth_user_pass_file, "stdin") || 

options->auth_user_pass_file_inline) && options->sc_info.challenge_text)

(quoted diff) +6 -0
+    msg (M_USAGE, "Credentials cannot be in a file if using --static-challenge");
+#endif
+
+  if (options->auth_user_pass_file_inline)
+    {
+      int n_inlined = 0;
[...]

in src/openvpn/ssl.c yo should use [pos - prev] instead of [pos - prev +1] [...]

(quoted diff) +4 -0
+                {
+                  strncpy(inlined_username, prev, pos - prev);
+                  inlined_username[pos - prev] = '\0';
+                  msg (M_INFO, "Using inlined username: %s (POS=%d PREV=%d)", 

inlined_username, pos, prev);

(quoted diff) +6 -0
+                }
+              else
+                {
+                  strncpy(inlined_password, prev, pos - prev);
+                  inlined_password[pos - prev] = '\0';
+                  msg (M_INFO, "Using inlined password: 

...**%s**",inlined_password);
+ }
[...]

I hope it's o.k. just to give the idea but not post full patches again.

Regards
Joerg
*Gesendet:* Donnerstag, 03. Oktober 2013 um 10:30 Uhr
*Von:* "Davide Brini" <[email protected]...>
*An:* [email protected]
*Betreff:* Re: [Openvpn-devel] [PATCH] Allow inlining of --auth-user-pass (previous version contained a leftover debug line left by mistake, sorry)

This patch allows inlining of the --auth-user-pass directive, so it is now possible to do

<auth-user-pass>
myusername
mypassword
</auth-user-pass>

or supply just the username, eg

<auth-user-pass>
myusername
</auth-user-pass>

(in this case the user is prompted for the password only).
The most changed files are options.c (sanity check of inlined credentials) and ssl.c (actual parsing of the inlined credentials).

Udates to the documentation will be provided in a separate patch if and when the present patch is accepted.

As discussed on IRC, for the time being the non-inlined syntax

auth-user-pass [up]

is still supported and [up] is expected to contain username and password on two lines.

---
src/openvpn/init.c | 6 +--
src/openvpn/misc.c | 2 +-
src/openvpn/options.c | 56 ++++++++++++++++++++++++---- src/openvpn/options.h | 2 +
src/openvpn/ssl.c | 98 +++++++++++++++++++++++++++++++++++++------------ src/openvpn/ssl.h | 2 +-

6 files changed, 131 insertions(+), 35 deletions(-)
src/openvpn/init.c +3 -3
index 031fb20..b11ae8a 100644
@@ -400,12 +400,12 @@ init_query_passwords (struct context *c)
 
 #if P2MP
 /* Auth user/pass input */
- if (c->options.auth_user_pass_file)
+ if (c->options.auth_user_pass_file || c->options.auth_user_pass_file_inline)
 {
 #ifdef ENABLE_CLIENT_CR
- auth_user_pass_setup (c->options.auth_user_pass_file, &c->options.sc_info);
+ auth_user_pass_setup (c->options.auth_user_pass_file, 
 c->options.auth_user_pass_file_inline, &c->options.sc_info);
 #else
- auth_user_pass_setup (c->options.auth_user_pass_file, NULL);
+ auth_user_pass_setup (c->options.auth_user_pass_file, 
 c->options.auth_user_pass_file_inline, NULL);
 #endif

}
#endif

src/openvpn/misc.c +1 -1
index 4688444..05bc2f0 100644
@@ -1036,7 +1036,7 @@ get_user_pass_cr (struct user_pass *up,
 
 if (!up->defined)
 {
- const bool from_stdin = (!auth_file || !strcmp (auth_file, "stdin"));
+ const bool from_stdin = (!auth_file || streq (auth_file, "stdin"));
 
 if (flags & GET_USER_PASS_PREVIOUS_CREDS_FAILED)
 msg (M_WARN, "Note: previous '%s' credentials failed", prefix);
src/openvpn/options.c +2 -1
index 4d0271f..6f2ea66 100644
@@ -1233,6 +1233,7 @@ show_p2mp_parms (const struct options *o)
 SHOW_BOOL (client);
 SHOW_BOOL (pull);
 SHOW_STR (auth_user_pass_file);
+ SHOW_STR (auth_user_pass_file_inline);
 
 gc_free (&gc);
 }
@@ -2080,7 +2081,7 @@ options_postprocess_verify_ce (const struct options 
 *options, const struct conne
 if (options->ifconfig_ipv6_local && !options->tun_ipv6 )
 msg (M_INFO, "Warning: --ifconfig-ipv6 without --tun-ipv6 will not do IPv6");
 
- if (options->auth_user_pass_file)
+ if ( options->auth_user_pass_file || options->auth_user_pass_file_inline )

msg (M_USAGE, "--auth-user-pass cannot be used with --mode server (it should be used on the client side only)");
if (options->ccd_exclusive && !options->client_config_dir)
msg (M_USAGE, "--ccd-exclusive must be used with --client-config-dir");

src/openvpn/options.c +1 -1
@@ -2274,7 +2275,7 @@ options_postprocess_verify_ce (const struct options 
 *options, const struct conne
 if (sum == 0)
 {
 #if P2MP
- if (!options->auth_user_pass_file)
+ if (!options->auth_user_pass_file && !options->auth_user_pass_file_inline)
 #endif

msg (M_USAGE, "No client-side authentication method is specified. You must use either --cert/--key, --pkcs12, or --auth-user-pass");
}

src/openvpn/options.c +6 -1
@@ -2350,8 +2351,42 @@ options_postprocess_verify_ce (const struct options 
 *options, const struct conne
 #endif /* ENABLE_SSL */
 
 #if P2MP
- if (options->auth_user_pass_file && !options->pull)
+ if ( ( options->auth_user_pass_file || options->auth_user_pass_file_inline) && 
 !options->pull)
 msg (M_USAGE, "--auth-user-pass requires --pull");
+
+ if ( ( !streq(options->auth_user_pass_file, "stdin") || 
 options->auth_user_pass_file_inline) && options->auth_nocache)
+ msg (M_USAGE, "Cannot use --auth-nocache with credentials from file");
+
+ if ( ( !streq(options->auth_user_pass_file, "stdin") || 

options->auth_user_pass_file_inline) && options->sc_info.challenge_text)
+ msg (M_USAGE, "Credentials cannot be in a file if using --static-challenge");

src/openvpn/options.c +28 -0
+
+ if (options->auth_user_pass_file_inline)
+ {
+ int n_inlined = 0;
+ const char *pos = options->auth_user_pass_file_inline;
+ const char *prev = pos;
+
+ if ( strlen(pos) == 0 )
+ msg (M_USAGE, "Invalid format for inlined --auth-user-pass");
+
+ while( (pos = strchr(pos, '\n')) != NULL )
+ {
+ n_inlined++;
+
+ if (n_inlined > 2)
+ msg (M_USAGE, "Too many lines in inlined --auth-user-pass");
+
+ if ( pos - prev > USER_PASS_LEN - 1 )
+ msg (M_USAGE, "Line too long in inlined --auth-user-pass");
+
+ pos++;
+ prev = pos;
+ }
+
+ if ( (n_inlined == 0) || (*prev != '\0') )
+ msg (M_USAGE, "Invalid format for inlined --auth-user-pass");
+
+ }

#endif

uninit_options (&defaults);

src/openvpn/options.c +10 -4
@@ -2719,9 +2754,10 @@ options_postprocess_filechecks (struct options *options)
 "--management user/password file");
 #endif /* ENABLE_MANAGEMENT */
 #if P2MP
- errs |= check_file_access (CHKACC_FILE|CHKACC_ACPTSTDIN,
- options->auth_user_pass_file, R_OK,
- "--auth-user-pass");
+ if (!streq(options->auth_user_pass_file, INLINE_FILE_TAG))
+ errs |= check_file_access (CHKACC_FILE|CHKACC_ACPTSTDIN,
+ options->auth_user_pass_file, R_OK,
+ "--auth-user-pass");
 #endif /* P2MP */
 
 /* ** System related ** */
@@ -5894,7 +5930,12 @@ add_option (struct options *options,
 VERIFY_PERMISSION (OPT_P_GENERAL);
 if (p[1])
 {
- options->auth_user_pass_file = p[1];
+ options->auth_user_pass_file = p[1];
+ if (streq (p[1], INLINE_FILE_TAG) && p[2])
+ {
+ options->auth_user_pass_file = "stdin";
+ options->auth_user_pass_file_inline = p[2];
+ }
 }

else
options->auth_user_pass_file = "stdin";

src/openvpn/options.c +1 -0
@@ -6591,6 +6632,7 @@ add_option (struct options *options,
 else if (streq (p[0], "auth-nocache"))
 {
 VERIFY_PERMISSION (OPT_P_GENERAL);
+ options->auth_nocache = true;
 ssl_set_auth_nocache ();
 }
 else if (streq (p[0], "auth-token") && p[1])
src/openvpn/options.h +1 -0
index 8e0e367..5ae733a 100644
@@ -292,6 +292,7 @@ struct options
 bool up_delay;
 bool up_restart;
 bool daemon;
+ bool auth_nocache;
 
 int remap_sigusr1;
 
@@ -460,6 +461,7 @@ struct options

bool pull; /* client pull of config options from server */ int push_continuation;
const char *auth_user_pass_file;
+ const char *auth_user_pass_file_inline;
struct options_pre_pull *pre_pull;

int server_poll_timeout;

src/openvpn/ssl.c +0 -0
index 69f77f3..aa249f1 100644
@@ -354,36 +354,88 @@ static char *auth_challenge; /* GLOBAL */
 #endif
 

void
-auth_user_pass_setup (const char *auth_file, const struct static_challenge_info *sci)
+auth_user_pass_setup (const char *auth_file, const char *auth_file_inline, const struct static_challenge_info *sci)
{

src/openvpn/ssl.c +6 -0
+
+ int extra_flags = 0;
+ int n_inlined = 0;
+ char inlined_username[USER_PASS_LEN];
+ char inlined_password[USER_PASS_LEN];
+

auth_user_pass_enabled = true;
+
if (!auth_user_pass.defined)
{
+ if (auth_file && streq (auth_file, "stdin") && auth_file_inline)
+ {
+ /* check how much is inlined. */
+ const char *pos = auth_file_inline;
+ const char *prev = pos;

src/openvpn/ssl.c +34 -0
+
+ while( (pos = strchr(pos, '\n')) != NULL)
+ {
+ n_inlined++;
+
+ if (n_inlined == 1)
+ {
+ strncpy(inlined_username, prev, pos - prev);
+ inlined_username[pos - prev + 1] = '\0';
+ msg (M_INFO, "Using inlined username: %s", inlined_username);
+ }
+ else
+ {
+ strncpy(inlined_password, prev, pos - prev);
+ inlined_password[pos - prev + 1] = '\0';
+ msg (M_INFO, "Using inlined password: ...");
+ }
+
+ pos++;
+ prev = pos;
+ }
+
+ if (n_inlined == 1)
+ extra_flags = GET_USER_PASS_PASSWORD_ONLY;
+ }
+
+ if (n_inlined == 2)
+ {
+ strcpy(auth_user_pass.username, inlined_username);
+ strcpy(auth_user_pass.password, inlined_password);
+ auth_user_pass.defined = true;
+ }
+ else
+ {

#if AUTO_USERID
- get_user_pass_auto_userid (&auth_user_pass, auth_file);
+ get_user_pass_auto_userid (&auth_user_pass, auth_file); #else

# ifdef ENABLE_CLIENT_CR
- if (auth_challenge) /* dynamic challenge/response */
- get_user_pass_cr (&auth_user_pass,
- auth_file,
- UP_TYPE_AUTH,
- GET_USER_PASS_MANAGEMENT|GET_USER_PASS_SENSITIVE|GET_USER_PASS_DYNAMIC_CHALLENGE,
- auth_challenge);
- else if (sci) /* static challenge response */
- {
- int flags = 
GET_USER_PASS_MANAGEMENT|GET_USER_PASS_SENSITIVE|GET_USER_PASS_STATIC_CHALLENGE;
- if (sci->flags & SC_ECHO)
- flags |= GET_USER_PASS_STATIC_CHALLENGE_ECHO;
- get_user_pass_cr (&auth_user_pass,
- auth_file,
- UP_TYPE_AUTH,
- flags,
- sci->challenge_text);
- }
- else
+ if (auth_challenge) /* dynamic challenge/response */
+ get_user_pass_cr (&auth_user_pass,
+ auth_file,
+ UP_TYPE_AUTH,
+ 
GET_USER_PASS_MANAGEMENT|GET_USER_PASS_SENSITIVE|GET_USER_PASS_DYNAMIC_CHALLENGE|extra_flags,
+ auth_challenge);
+ else if (sci) /* static challenge response */
+ {
+ int flags = 
GET_USER_PASS_MANAGEMENT|GET_USER_PASS_SENSITIVE|GET_USER_PASS_STATIC_CHALLENGE|extra_flags;
+ if (sci->flags & SC_ECHO)
+ flags |= GET_USER_PASS_STATIC_CHALLENGE_ECHO;
+
+ get_user_pass_cr (&auth_user_pass,
+ auth_file,
+ UP_TYPE_AUTH,
+ flags,
+ sci->challenge_text);
+ }
+ else
# endif
- get_user_pass (&auth_user_pass, auth_file, UP_TYPE_AUTH, 
GET_USER_PASS_MANAGEMENT|GET_USER_PASS_SENSITIVE);
+ get_user_pass (&auth_user_pass, auth_file, UP_TYPE_AUTH, 
GET_USER_PASS_MANAGEMENT|GET_USER_PASS_SENSITIVE|extra_flags);
#endif
+ }
src/openvpn/ssl.c +4 -0
+
+ if (n_inlined == 1)
+ strcpy(auth_user_pass.username, inlined_username);
+

}
}

src/openvpn/ssl.c +2 -2
@@ -1892,9 +1944,9 @@ key_method_2_write (struct buffer *buf, struct tls_session 
 *session)
 if (auth_user_pass_enabled)
 {
 #ifdef ENABLE_CLIENT_CR
- auth_user_pass_setup (NULL, session->opt->sci);
+ auth_user_pass_setup (NULL, NULL, session->opt->sci);
 #else
- auth_user_pass_setup (NULL, NULL);
+ auth_user_pass_setup (NULL, NULL, NULL);
 #endif
 if (!write_string (buf, auth_user_pass.username, -1))

goto error;

src/openvpn/ssl.h +1 -1
index cd7cae2..c7554aa 100644
@@ -388,7 +388,7 @@ void pem_password_setup (const char *auth_file);
 * Setup authentication username and password. If auth_file is given, use the
 * credentials stored in the file.
 */
-void auth_user_pass_setup (const char *auth_file, const struct 
 static_challenge_info *sc_info);
+void auth_user_pass_setup (const char *auth_file, const char *auth_file_inline, 
 const struct static_challenge_info *sc_info);
 

/*
* Ensure that no caching is performed on authentication information
-- 1.7.10.4------------------------------------------------------------------------------ October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk_______________________________________________
Openvpn-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openvpn-devel

------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk

_______________________________________________
Openvpn-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openvpn-devel

#4 lore raw

and another problem:

Configs without "auth-user-pass" will segfault, for in options_postprocess_verify_ce you do a

streq(options->auth_user_pass_file, "stdin")

without checking first, if options->auth_user_pass_file is not NULL.

so here is fix number three for src/openvpn/misc.c (in fact, it is "old" number one and three) ;-)

[...]
#if P2MP
- if (options->auth_user_pass_file && !options->pull)
+ if ( ( options->auth_user_pass_file || options->auth_user_pass_file_inline) && !options->pull)

     msg (M_USAGE, "--auth-user-pass requires --pull");

+
+ if ( ( (options->auth_user_pass_file && !streq(options->auth_user_pass_file, "stdin")) || options->auth_user_pass_file_inline) && options->auth_nocache)
+ msg (M_USAGE, "Cannot use --auth-nocache with credentials from file");
+
+#ifdef ENABLE_CLIENT_CR
+ if ( ( (options->auth_user_pass_file && !streq(options->auth_user_pass_file, "stdin")) || options->auth_user_pass_file_inline) && options->sc_info.challenge_text)
+ msg (M_USAGE, "Credentials cannot be in a file if using --static-challenge");
+#endif
[...]

A quick test did work with and without user authentication (only tested inline settzing, not with a file).
Joerg

-------- Original-Nachricht --------
Gesendet: Samstag, 05. Oktober 2013 um 15:57 Uhr
Von: "Max Muster" <[email protected]...>
An: "Davide Brini" <[email protected]...>
Cc: [email protected]
Betreff: Re: [Openvpn-devel] [PATCH] Allow inlining of --auth-user-pass oops, just took my "debug" version of src/openvpn/ssl.c ...

Of course output of string length and especially password in log file is not intended ;-)

Joerg

-------- Original-Nachricht --------
Betreff: Re: [Openvpn-devel] [PATCH] Allow inlining of --auth-user-pass
Von: [email protected]...
An: Davide Brini <[email protected]...>
Kopie (CC): [email protected]
Datum: Sa 05 Okt 2013 15:48:42 CEST

Quoted 435 lines

Hi Davide,
nice idea. But I think I found two small bugs:
First, it won't compile in a config w/o ENABLE_CLIENT_CR defined (there is no "sc_info").
Second, if I'm not mistaken, name and password are not copied correctly:
If # of charachters is (pos - prev), the last charakter is at [pos - prev -1] and to terminate the string you should set [pos - prev] to '\0'. My suggestion (not sure, if the first one works with management enabled, only tested w/o).
Fix in src/openvpn/misc.c (add #ifdef):
[...]
+
+ if ( ( !streq(options->auth_user_pass_file, "stdin") || options->auth_user_pass_file_inline) && options->auth_nocache)
+ msg (M_USAGE, "Cannot use --auth-nocache with credentials from file");

(quoted diff) +3 -0
+
+#ifdef ENABLE_CLIENT_CR
+ if ( ( !streq(options->auth_user_pass_file, "stdin") ||

options->auth_user_pass_file_inline) && options->sc_info.challenge_text)
+ msg (M_USAGE, "Credentials cannot be in a file if using --static-challenge");

(quoted diff) +5 -0
+#endif
+
+ if (options->auth_user_pass_file_inline)
+ {
+ int n_inlined = 0;
[...]

in src/openvpn/ssl.c yo should use [pos - prev] instead of [pos - prev +1] [...]
+ {
+ strncpy(inlined_username, prev, pos - prev);
+ inlined_username[pos - prev] = '\0';
+ msg (M_INFO, "Using inlined username: %s (POS=%d PREV=%d)", inlined_username, pos, prev);
+ }
+ else
+ {
+ strncpy(inlined_password, prev, pos - prev);
+ inlined_password[pos - prev] = '\0';
+ msg (M_INFO, "Using inlined password:
...**%s**",inlined_password);
+ }
[...]

I hope it's o.k. just to give the idea but not post full patches again.

Regards
Joerg
*Gesendet:* Donnerstag, 03. Oktober 2013 um 10:30 Uhr
*Von:* "Davide Brini" <[email protected]...>
*An:* [email protected]
*Betreff:* Re: [Openvpn-devel] [PATCH] Allow inlining of --auth-user-pass (previous version contained a leftover debug line left by mistake, sorry)

This patch allows inlining of the --auth-user-pass directive, so it is now possible to do

<auth-user-pass>
myusername
mypassword
</auth-user-pass>

or supply just the username, eg

<auth-user-pass>
myusername
</auth-user-pass>

(in this case the user is prompted for the password only).
The most changed files are options.c (sanity check of inlined credentials) and ssl.c (actual parsing of the inlined credentials).

Udates to the documentation will be provided in a separate patch if and when the present patch is accepted.

As discussed on IRC, for the time being the non-inlined syntax

auth-user-pass [up]

is still supported and [up] is expected to contain username and password on two lines.

---
src/openvpn/init.c | 6 +--
src/openvpn/misc.c | 2 +-
src/openvpn/options.c | 56 ++++++++++++++++++++++++---- src/openvpn/options.h | 2 +
src/openvpn/ssl.c | 98 +++++++++++++++++++++++++++++++++++++------------ src/openvpn/ssl.h | 2 +-

6 files changed, 131 insertions(+), 35 deletions(-)
src/openvpn/init.c +3 -3
index 031fb20..b11ae8a 100644
@@ -400,12 +400,12 @@ init_query_passwords (struct context *c)
 
 #if P2MP
 /* Auth user/pass input */
- if (c->options.auth_user_pass_file)
+ if (c->options.auth_user_pass_file || c->options.auth_user_pass_file_inline)
 {
 #ifdef ENABLE_CLIENT_CR
- auth_user_pass_setup (c->options.auth_user_pass_file, &c->options.sc_info);
+ auth_user_pass_setup (c->options.auth_user_pass_file,
 c->options.auth_user_pass_file_inline, &c->options.sc_info);
 #else
- auth_user_pass_setup (c->options.auth_user_pass_file, NULL);
+ auth_user_pass_setup (c->options.auth_user_pass_file,
 c->options.auth_user_pass_file_inline, NULL);
 #endif

}
#endif

src/openvpn/misc.c +1 -1
index 4688444..05bc2f0 100644
@@ -1036,7 +1036,7 @@ get_user_pass_cr (struct user_pass *up,
 
 if (!up->defined)
 {
- const bool from_stdin = (!auth_file || !strcmp (auth_file, "stdin"));
+ const bool from_stdin = (!auth_file || streq (auth_file, "stdin"));
 
 if (flags & GET_USER_PASS_PREVIOUS_CREDS_FAILED)
 msg (M_WARN, "Note: previous '%s' credentials failed", prefix);
src/openvpn/options.c +2 -1
index 4d0271f..6f2ea66 100644
@@ -1233,6 +1233,7 @@ show_p2mp_parms (const struct options *o)
 SHOW_BOOL (client);
 SHOW_BOOL (pull);
 SHOW_STR (auth_user_pass_file);
+ SHOW_STR (auth_user_pass_file_inline);
 
 gc_free (&gc);
 }
@@ -2080,7 +2081,7 @@ options_postprocess_verify_ce (const struct options
 *options, const struct conne
 if (options->ifconfig_ipv6_local && !options->tun_ipv6 )
 msg (M_INFO, "Warning: --ifconfig-ipv6 without --tun-ipv6 will not do IPv6");
 
- if (options->auth_user_pass_file)
+ if ( options->auth_user_pass_file || options->auth_user_pass_file_inline )

msg (M_USAGE, "--auth-user-pass cannot be used with --mode server (it should be used on the client side only)");
if (options->ccd_exclusive && !options->client_config_dir)
msg (M_USAGE, "--ccd-exclusive must be used with --client-config-dir");

src/openvpn/options.c +1 -1
@@ -2274,7 +2275,7 @@ options_postprocess_verify_ce (const struct options
 *options, const struct conne
 if (sum == 0)
 {
 #if P2MP
- if (!options->auth_user_pass_file)
+ if (!options->auth_user_pass_file && !options->auth_user_pass_file_inline)
 #endif

msg (M_USAGE, "No client-side authentication method is specified. You must use either --cert/--key, --pkcs12, or --auth-user-pass");
}

src/openvpn/options.c +6 -1
@@ -2350,8 +2351,42 @@ options_postprocess_verify_ce (const struct options
 *options, const struct conne
 #endif /* ENABLE_SSL */
 
 #if P2MP
- if (options->auth_user_pass_file && !options->pull)
+ if ( ( options->auth_user_pass_file || options->auth_user_pass_file_inline) &&
 !options->pull)
 msg (M_USAGE, "--auth-user-pass requires --pull");
+
+ if ( ( !streq(options->auth_user_pass_file, "stdin") ||
 options->auth_user_pass_file_inline) && options->auth_nocache)
+ msg (M_USAGE, "Cannot use --auth-nocache with credentials from file");
+
+ if ( ( !streq(options->auth_user_pass_file, "stdin") ||

options->auth_user_pass_file_inline) && options->sc_info.challenge_text)
+ msg (M_USAGE, "Credentials cannot be in a file if using --static-challenge");

src/openvpn/options.c +28 -0
+
+ if (options->auth_user_pass_file_inline)
+ {
+ int n_inlined = 0;
+ const char *pos = options->auth_user_pass_file_inline;
+ const char *prev = pos;
+
+ if ( strlen(pos) == 0 )
+ msg (M_USAGE, "Invalid format for inlined --auth-user-pass");
+
+ while( (pos = strchr(pos, '\n')) != NULL )
+ {
+ n_inlined++;
+
+ if (n_inlined > 2)
+ msg (M_USAGE, "Too many lines in inlined --auth-user-pass");
+
+ if ( pos - prev > USER_PASS_LEN - 1 )
+ msg (M_USAGE, "Line too long in inlined --auth-user-pass");
+
+ pos++;
+ prev = pos;
+ }
+
+ if ( (n_inlined == 0) || (*prev != '\0') )
+ msg (M_USAGE, "Invalid format for inlined --auth-user-pass");
+
+ }

#endif

uninit_options (&defaults);

src/openvpn/options.c +10 -4
@@ -2719,9 +2754,10 @@ options_postprocess_filechecks (struct options *options)
 "--management user/password file");
 #endif /* ENABLE_MANAGEMENT */
 #if P2MP
- errs |= check_file_access (CHKACC_FILE|CHKACC_ACPTSTDIN,
- options->auth_user_pass_file, R_OK,
- "--auth-user-pass");
+ if (!streq(options->auth_user_pass_file, INLINE_FILE_TAG))
+ errs |= check_file_access (CHKACC_FILE|CHKACC_ACPTSTDIN,
+ options->auth_user_pass_file, R_OK,
+ "--auth-user-pass");
 #endif /* P2MP */
 
 /* ** System related ** */
@@ -5894,7 +5930,12 @@ add_option (struct options *options,
 VERIFY_PERMISSION (OPT_P_GENERAL);
 if (p[1])
 {
- options->auth_user_pass_file = p[1];
+ options->auth_user_pass_file = p[1];
+ if (streq (p[1], INLINE_FILE_TAG) && p[2])
+ {
+ options->auth_user_pass_file = "stdin";
+ options->auth_user_pass_file_inline = p[2];
+ }
 }

else
options->auth_user_pass_file = "stdin";

src/openvpn/options.c +1 -0
@@ -6591,6 +6632,7 @@ add_option (struct options *options,
 else if (streq (p[0], "auth-nocache"))
 {
 VERIFY_PERMISSION (OPT_P_GENERAL);
+ options->auth_nocache = true;
 ssl_set_auth_nocache ();
 }
 else if (streq (p[0], "auth-token") && p[1])
src/openvpn/options.h +1 -0
index 8e0e367..5ae733a 100644
@@ -292,6 +292,7 @@ struct options
 bool up_delay;
 bool up_restart;
 bool daemon;
+ bool auth_nocache;
 
 int remap_sigusr1;
 
@@ -460,6 +461,7 @@ struct options

bool pull; /* client pull of config options from server */ int push_continuation;
const char *auth_user_pass_file;
+ const char *auth_user_pass_file_inline;
struct options_pre_pull *pre_pull;

int server_poll_timeout;

src/openvpn/ssl.c +0 -0
index 69f77f3..aa249f1 100644
@@ -354,36 +354,88 @@ static char *auth_challenge; /* GLOBAL */
 #endif
 

void
-auth_user_pass_setup (const char *auth_file, const struct static_challenge_info *sci)
+auth_user_pass_setup (const char *auth_file, const char *auth_file_inline, const struct static_challenge_info *sci)
{

src/openvpn/ssl.c +6 -0
+
+ int extra_flags = 0;
+ int n_inlined = 0;
+ char inlined_username[USER_PASS_LEN];
+ char inlined_password[USER_PASS_LEN];
+

auth_user_pass_enabled = true;
+
if (!auth_user_pass.defined)
{
+ if (auth_file && streq (auth_file, "stdin") && auth_file_inline)
+ {
+ /* check how much is inlined. */
+ const char *pos = auth_file_inline;
+ const char *prev = pos;

src/openvpn/ssl.c +34 -0
+
+ while( (pos = strchr(pos, '\n')) != NULL)
+ {
+ n_inlined++;
+
+ if (n_inlined == 1)
+ {
+ strncpy(inlined_username, prev, pos - prev);
+ inlined_username[pos - prev + 1] = '\0';
+ msg (M_INFO, "Using inlined username: %s", inlined_username);
+ }
+ else
+ {
+ strncpy(inlined_password, prev, pos - prev);
+ inlined_password[pos - prev + 1] = '\0';
+ msg (M_INFO, "Using inlined password: ...");
+ }
+
+ pos++;
+ prev = pos;
+ }
+
+ if (n_inlined == 1)
+ extra_flags = GET_USER_PASS_PASSWORD_ONLY;
+ }
+
+ if (n_inlined == 2)
+ {
+ strcpy(auth_user_pass.username, inlined_username);
+ strcpy(auth_user_pass.password, inlined_password);
+ auth_user_pass.defined = true;
+ }
+ else
+ {

#if AUTO_USERID
- get_user_pass_auto_userid (&auth_user_pass, auth_file);
+ get_user_pass_auto_userid (&auth_user_pass, auth_file); #else

# ifdef ENABLE_CLIENT_CR
- if (auth_challenge) /* dynamic challenge/response */
- get_user_pass_cr (&auth_user_pass,
- auth_file,
- UP_TYPE_AUTH,
- GET_USER_PASS_MANAGEMENT|GET_USER_PASS_SENSITIVE|GET_USER_PASS_DYNAMIC_CHALLENGE,
- auth_challenge);
- else if (sci) /* static challenge response */
- {
- int flags =
GET_USER_PASS_MANAGEMENT|GET_USER_PASS_SENSITIVE|GET_USER_PASS_STATIC_CHALLENGE;
- if (sci->flags & SC_ECHO)
- flags |= GET_USER_PASS_STATIC_CHALLENGE_ECHO;
- get_user_pass_cr (&auth_user_pass,
- auth_file,
- UP_TYPE_AUTH,
- flags,
- sci->challenge_text);
- }
- else
+ if (auth_challenge) /* dynamic challenge/response */
+ get_user_pass_cr (&auth_user_pass,
+ auth_file,
+ UP_TYPE_AUTH,
+
GET_USER_PASS_MANAGEMENT|GET_USER_PASS_SENSITIVE|GET_USER_PASS_DYNAMIC_CHALLENGE|extra_flags,
+ auth_challenge);
+ else if (sci) /* static challenge response */
+ {
+ int flags =
GET_USER_PASS_MANAGEMENT|GET_USER_PASS_SENSITIVE|GET_USER_PASS_STATIC_CHALLENGE|extra_flags;
+ if (sci->flags & SC_ECHO)
+ flags |= GET_USER_PASS_STATIC_CHALLENGE_ECHO;
+
+ get_user_pass_cr (&auth_user_pass,
+ auth_file,
+ UP_TYPE_AUTH,
+ flags,
+ sci->challenge_text);
+ }
+ else
# endif
- get_user_pass (&auth_user_pass, auth_file, UP_TYPE_AUTH,
GET_USER_PASS_MANAGEMENT|GET_USER_PASS_SENSITIVE);
+ get_user_pass (&auth_user_pass, auth_file, UP_TYPE_AUTH,
GET_USER_PASS_MANAGEMENT|GET_USER_PASS_SENSITIVE|extra_flags);
#endif
+ }
src/openvpn/ssl.c +4 -0
+
+ if (n_inlined == 1)
+ strcpy(auth_user_pass.username, inlined_username);
+

}
}

src/openvpn/ssl.c +2 -2
@@ -1892,9 +1944,9 @@ key_method_2_write (struct buffer *buf, struct tls_session
 *session)
 if (auth_user_pass_enabled)
 {
 #ifdef ENABLE_CLIENT_CR
- auth_user_pass_setup (NULL, session->opt->sci);
+ auth_user_pass_setup (NULL, NULL, session->opt->sci);
 #else
- auth_user_pass_setup (NULL, NULL);
+ auth_user_pass_setup (NULL, NULL, NULL);
 #endif
 if (!write_string (buf, auth_user_pass.username, -1))

goto error;

src/openvpn/ssl.h +1 -1
index cd7cae2..c7554aa 100644
@@ -388,7 +388,7 @@ void pem_password_setup (const char *auth_file);
 * Setup authentication username and password. If auth_file is given, use the
 * credentials stored in the file.
 */
-void auth_user_pass_setup (const char *auth_file, const struct
 static_challenge_info *sc_info);
+void auth_user_pass_setup (const char *auth_file, const char *auth_file_inline,
 const struct static_challenge_info *sc_info);
 

/*
* Ensure that no caching is performed on authentication information
-- 1.7.10.4------------------------------------------------------------------------------ October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk_______________________________________________
Openvpn-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openvpn-devel[https://lists.sourceforge.net/lists/listinfo/openvpn-devel]

------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk[http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk]

Quoted 5 lines

_______________________________________________
Openvpn-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openvpn-devel[https://lists.sourceforge.net/lists/listinfo/openvpn-devel]

------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk[http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk]
_______________________________________________
Openvpn-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openvpn-devel[https://lists.sourceforge.net/lists/listinfo/openvpn-devel]