Skip to contentSkip to conversation

target/arm/cpu: Introduce sve_vq_supported bitmap

PATCH Superseded Andrew Jones 2 participants 10 messages Aug 19, 2021 – Aug 23, 2021

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

cover target/arm/cpu: Introduce sve_vq_supported bitmap

While reviewing the new A64FX CPU type it became clear that CPU types should be able to specify which SVE vector lengths are supported. This series adds a new bitmap member to ARMCPU and modifies arm_cpu_sve_finalize() to validate inputs against it. So far we only need to set the bitmap for the 'max' CPU type though and, since it supports all vector lengths, we just fill the whole thing.

This series was inspired by Richard Henderson's suggestion to replace arm_cpu_sve_finalize's kvm_supported bitmap with something that could be shared with TCG.

So far I've only lightly tested this. I'll do more testing and report back later. I'd also be happy to get test results from others.

Thanks,
drew

Andrew Jones (4):
target/arm/cpu: Introduce sve_vq_supported bitmap target/arm/kvm64: Ensure sve vls map is completely clear target/arm/cpu64: Replace kvm_supported with sve_vq_supported target/arm/cpu64: Validate sve vector lengths are supported

 target/arm/cpu.h   |   4 ++
 target/arm/cpu64.c | 118 +++++++++++++++++++++------------------------
 target/arm/kvm64.c |   2 +-
 3 files changed, 61 insertions(+), 63 deletions(-)
Signature · 1 line
2.31.1
#1 lore raw

PATCH 1/4 target/arm/cpu: Introduce sve_vq_supported bitmap

Allow CPUs that support SVE to specify which SVE vector lengths they support by setting them in this bitmap. Currently only the 'max' and 'host' CPU types supports SVE and 'host' requires KVM which obtains its supported bitmap from the host. So, we only need to initialize the bitmap for 'max' with TCG. And, since 'max' should support all SVE vector lengths we simply fill the bitmap. Future CPU types may have less trivial maps though.

---
 target/arm/cpu.h   | 4 ++++
 target/arm/cpu64.c | 2 ++
 2 files changed, 6 insertions(+)
target/arm/cpu.h +4 -0
index 9f0a5f84d503..cc645b57421f 100644
@@ -1019,9 +1019,13 @@ struct ARMCPU {
      * While processing properties during initialization, corresponding
      * sve_vq_init bits are set for bits in sve_vq_map that have been
      * set by properties.
+     *
+     * Bits set in sve_vq_supported represent valid vector lengths for
+     * the CPU type.
      */
     DECLARE_BITMAP(sve_vq_map, ARM_MAX_VQ);
     DECLARE_BITMAP(sve_vq_init, ARM_MAX_VQ);
+    DECLARE_BITMAP(sve_vq_supported, ARM_MAX_VQ);
 
     /* Generic timer counter frequency, in Hz */
     uint64_t gt_cntfrq_hz;
target/arm/cpu64.c +2 -0
index c690318a9b63..eb9318c83b74 100644
@@ -840,6 +840,8 @@ static void aarch64_max_initfn(Object *obj)
         /* Default to PAUTH on, with the architected algorithm. */
         qdev_property_add_static(DEVICE(obj), &arm_cpu_pauth_property);
         qdev_property_add_static(DEVICE(obj), &arm_cpu_pauth_impdef_property);
+
+        bitmap_fill(cpu->sve_vq_supported, ARM_MAX_VQ);
     }
 
     aarch64_add_sve_properties(obj);
Signature · 1 line
2.31.1
Reviewed-by on v1 1/4
#2 lore raw
Quoted 8 lines · Andrew Jones

Allow CPUs that support SVE to specify which SVE vector lengths they support by setting them in this bitmap. Currently only the 'max' and 'host' CPU types supports SVE and 'host' requires KVM which obtains its supported bitmap from the host. So, we only need to initialize the bitmap for 'max' with TCG. And, since 'max' should support all SVE vector lengths we simply fill the bitmap. Future CPU types may have less trivial maps though.

Quoted 5 lines
---
 target/arm/cpu.h   | 4 ++++
 target/arm/cpu64.c | 2 ++
 2 files changed, 6 insertions(+)
#3 lore raw

PATCH 2/4 target/arm/kvm64: Ensure sve vls map is completely clear

In reply to Andrew Jones

bitmap_clear() only clears the given range. While the given range should be sufficient in this case we might as well be 100% sure all bits are zeroed by using bitmap_zero().

---
 target/arm/kvm64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
target/arm/kvm64.c +1 -1
index 59982d470d37..e790d6c9a573 100644
@@ -740,7 +740,7 @@ void kvm_arm_sve_get_vls(CPUState *cs, unsigned long *map)
     uint32_t vq = 0;
     int i, j;
 
-    bitmap_clear(map, 0, ARM_MAX_VQ);
+    bitmap_zero(map, ARM_MAX_VQ);
 
     /*
      * KVM ensures all host CPUs support the same set of vector lengths.
Signature · 1 line
2.31.1
Reviewed-by on v1 2/4
#4 lore raw

Re: [PATCH 2/4] target/arm/kvm64: Ensure sve vls map is completely clear

Quoted 8 lines · Andrew Jones

bitmap_clear() only clears the given range. While the given range should be sufficient in this case we might as well be 100% sure all bits are zeroed by using bitmap_zero().

---
 target/arm/kvm64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
#5 lore raw

PATCH 3/4 target/arm/cpu64: Replace kvm_supported with sve_vq_supported

In reply to Andrew Jones

Now that we have an ARMCPU member sve_vq_supported we no longer need the local kvm_supported bitmap for KVM's supported vector lengths.

---
 target/arm/cpu64.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)
target/arm/cpu64.c +11 -8
index eb9318c83b74..557fd4757740 100644
@@ -265,14 +265,17 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
      * any of the above.  Finally, if SVE is not disabled, then at least one
      * vector length must be enabled.
      */
-    DECLARE_BITMAP(kvm_supported, ARM_MAX_VQ);
     DECLARE_BITMAP(tmp, ARM_MAX_VQ);
     uint32_t vq, max_vq = 0;
 
-    /* Collect the set of vector lengths supported by KVM. */
-    bitmap_zero(kvm_supported, ARM_MAX_VQ);
+    /*
+     * CPU models specify a set of supported vector lengths which are
+     * enabled by default.  Attempting to enable any vector length not set
+     * in the supported bitmap results in an error.  When KVM is enabled we
+     * fetch the supported bitmap from the host.
+     */
     if (kvm_enabled() && kvm_arm_sve_supported()) {
-        kvm_arm_sve_get_vls(CPU(cpu), kvm_supported);
+        kvm_arm_sve_get_vls(CPU(cpu), cpu->sve_vq_supported);
     } else if (kvm_enabled()) {
         assert(!cpu_isar_feature(aa64_sve, cpu));
     }
@@ -299,7 +302,7 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
              * For KVM we have to automatically enable all supported unitialized
              * lengths, even when the smaller lengths are not all powers-of-two.
              */
-            bitmap_andnot(tmp, kvm_supported, cpu->sve_vq_init, max_vq);
+            bitmap_andnot(tmp, cpu->sve_vq_supported, cpu->sve_vq_init, max_vq);
             bitmap_or(cpu->sve_vq_map, cpu->sve_vq_map, tmp, max_vq);
         } else {
             /* Propagate enabled bits down through required powers-of-two. */
@@ -322,12 +325,12 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
             /* Disabling a supported length disables all larger lengths. */
             for (vq = 1; vq <= ARM_MAX_VQ; ++vq) {
                 if (test_bit(vq - 1, cpu->sve_vq_init) &&
-                    test_bit(vq - 1, kvm_supported)) {
+                    test_bit(vq - 1, cpu->sve_vq_supported)) {
                     break;
                 }
             }
             max_vq = vq <= ARM_MAX_VQ ? vq - 1 : ARM_MAX_VQ;
-            bitmap_andnot(cpu->sve_vq_map, kvm_supported,
+            bitmap_andnot(cpu->sve_vq_map, cpu->sve_vq_supported,
                           cpu->sve_vq_init, max_vq);
             if (max_vq == 0 || bitmap_empty(cpu->sve_vq_map, max_vq)) {
                 error_setg(errp, "cannot disable sve%d", vq * 128);
@@ -392,7 +395,7 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
 
     if (kvm_enabled()) {
         /* Ensure the set of lengths matches what KVM supports. */
-        bitmap_xor(tmp, cpu->sve_vq_map, kvm_supported, max_vq);
+        bitmap_xor(tmp, cpu->sve_vq_map, cpu->sve_vq_supported, max_vq);
         if (!bitmap_empty(tmp, max_vq)) {
             vq = find_last_bit(tmp, max_vq) + 1;
             if (test_bit(vq - 1, cpu->sve_vq_map)) {
Signature · 1 line
2.31.1
Reviewed-by on v1 3/4
#6 lore raw

Re: [PATCH 3/4] target/arm/cpu64: Replace kvm_supported with sve_vq_supported

Quoted 8 lines · Andrew Jones

Now that we have an ARMCPU member sve_vq_supported we no longer need the local kvm_supported bitmap for KVM's supported vector lengths.

---
 target/arm/cpu64.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)
#7 lore raw

PATCH 4/4 target/arm/cpu64: Validate sve vector lengths are supported

In reply to Andrew Jones

Future CPU types may specify which vector lengths are supported. We can apply nearly the same logic to validate those lengths as we do for KVM's supported vector lengths. We merge the code where we can, but unfortunately can't completely merge it because KVM requires all vector lengths, power-of-two or not, smaller than the maximum enabled length to also be enabled. The architecture only requires all the power-of-two lengths, though, so TCG will only enforce that.

---
 target/arm/cpu64.c | 101 ++++++++++++++++++++-------------------------
 1 file changed, 45 insertions(+), 56 deletions(-)
target/arm/cpu64.c +45 -56
index 557fd4757740..9cb41c442600 100644
@@ -329,35 +329,26 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
                     break;
                 }
             }
-            max_vq = vq <= ARM_MAX_VQ ? vq - 1 : ARM_MAX_VQ;
-            bitmap_andnot(cpu->sve_vq_map, cpu->sve_vq_supported,
-                          cpu->sve_vq_init, max_vq);
-            if (max_vq == 0 || bitmap_empty(cpu->sve_vq_map, max_vq)) {
-                error_setg(errp, "cannot disable sve%d", vq * 128);
-                error_append_hint(errp, "Disabling sve%d results in all "
-                                  "vector lengths being disabled.\n",
-                                  vq * 128);
-                error_append_hint(errp, "With SVE enabled, at least one "
-                                  "vector length must be enabled.\n");
-                return;
-            }
         } else {
             /* Disabling a power-of-two disables all larger lengths. */
-            if (test_bit(0, cpu->sve_vq_init)) {
-                error_setg(errp, "cannot disable sve128");
-                error_append_hint(errp, "Disabling sve128 results in all "
-                                  "vector lengths being disabled.\n");
-                error_append_hint(errp, "With SVE enabled, at least one "
-                                  "vector length must be enabled.\n");
-                return;
-            }
-            for (vq = 2; vq <= ARM_MAX_VQ; vq <<= 1) {
+            for (vq = 1; vq <= ARM_MAX_VQ; vq <<= 1) {
                 if (test_bit(vq - 1, cpu->sve_vq_init)) {
                     break;
                 }
             }
-            max_vq = vq <= ARM_MAX_VQ ? vq - 1 : ARM_MAX_VQ;
-            bitmap_complement(cpu->sve_vq_map, cpu->sve_vq_init, max_vq);
+        }
+
+        max_vq = vq <= ARM_MAX_VQ ? vq - 1 : ARM_MAX_VQ;
+        bitmap_andnot(cpu->sve_vq_map, cpu->sve_vq_supported,
+                      cpu->sve_vq_init, max_vq);
+        if (max_vq == 0 || bitmap_empty(cpu->sve_vq_map, max_vq)) {
+            error_setg(errp, "cannot disable sve%d", vq * 128);
+            error_append_hint(errp, "Disabling sve%d results in all "
+                              "vector lengths being disabled.\n",
+                              vq * 128);
+            error_append_hint(errp, "With SVE enabled, at least one "
+                              "vector length must be enabled.\n");
+            return;
         }
 
         max_vq = find_last_bit(cpu->sve_vq_map, max_vq) + 1;
@@ -393,46 +384,44 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
     assert(max_vq != 0);
     bitmap_clear(cpu->sve_vq_map, max_vq, ARM_MAX_VQ - max_vq);
 
-    if (kvm_enabled()) {
-        /* Ensure the set of lengths matches what KVM supports. */
-        bitmap_xor(tmp, cpu->sve_vq_map, cpu->sve_vq_supported, max_vq);
-        if (!bitmap_empty(tmp, max_vq)) {
-            vq = find_last_bit(tmp, max_vq) + 1;
-            if (test_bit(vq - 1, cpu->sve_vq_map)) {
-                if (cpu->sve_max_vq) {
-                    error_setg(errp, "cannot set sve-max-vq=%d",
-                               cpu->sve_max_vq);
-                    error_append_hint(errp, "This KVM host does not support "
-                                      "the vector length %d-bits.\n",
-                                      vq * 128);
-                    error_append_hint(errp, "It may not be possible to use "
-                                      "sve-max-vq with this KVM host. Try "
-                                      "using only sve<N> properties.\n");
-                } else {
-                    error_setg(errp, "cannot enable sve%d", vq * 128);
-                    error_append_hint(errp, "This KVM host does not support "
-                                      "the vector length %d-bits.\n",
-                                      vq * 128);
-                }
+    /* Ensure the set of lengths matches what is supported. */
+    bitmap_xor(tmp, cpu->sve_vq_map, cpu->sve_vq_supported, max_vq);
+    if (!bitmap_empty(tmp, max_vq)) {
+        vq = find_last_bit(tmp, max_vq) + 1;
+        if (test_bit(vq - 1, cpu->sve_vq_map)) {
+            if (cpu->sve_max_vq) {
+                error_setg(errp, "cannot set sve-max-vq=%d", cpu->sve_max_vq);
+                error_append_hint(errp, "This CPU does not support "
+                                  "the vector length %d-bits.\n", vq * 128);
+                error_append_hint(errp, "It may not be possible to use "
+                                  "sve-max-vq with this CPU. Try "
+                                  "using only sve<N> properties.\n");
             } else {
+                error_setg(errp, "cannot enable sve%d", vq * 128);
+                error_append_hint(errp, "This CPU does not support "
+                                  "the vector length %d-bits.\n", vq * 128);
+            }
+            return;
+        } else {
+            if (kvm_enabled()) {
                 error_setg(errp, "cannot disable sve%d", vq * 128);
                 error_append_hint(errp, "The KVM host requires all "
                                   "supported vector lengths smaller "
                                   "than %d bits to also be enabled.\n",
                                   max_vq * 128);
-            }
-            return;
-        }
-    } else {
-        /* Ensure all required powers-of-two are enabled. */
-        for (vq = pow2floor(max_vq); vq >= 1; vq >>= 1) {
-            if (!test_bit(vq - 1, cpu->sve_vq_map)) {
-                error_setg(errp, "cannot disable sve%d", vq * 128);
-                error_append_hint(errp, "sve%d is required as it "
-                                  "is a power-of-two length smaller than "
-                                  "the maximum, sve%d\n",
-                                  vq * 128, max_vq * 128);
                 return;
+            } else {
+                /* Ensure all required powers-of-two are enabled. */
+                for (vq = pow2floor(max_vq); vq >= 1; vq >>= 1) {
+                    if (!test_bit(vq - 1, cpu->sve_vq_map)) {
+                        error_setg(errp, "cannot disable sve%d", vq * 128);
+                        error_append_hint(errp, "sve%d is required as it "
+                                          "is a power-of-two length smaller "
+                                          " than the maximum, sve%d\n",
+                                          vq * 128, max_vq * 128);
+                        return;
+                    }
+                }
             }
         }
     }
Signature · 1 line
2.31.1
#8 lore raw

Re: [PATCH 4/4] target/arm/cpu64: Validate sve vector lengths are supported

Quoted 129 lines · Andrew Jones

Future CPU types may specify which vector lengths are supported. We can apply nearly the same logic to validate those lengths as we do for KVM's supported vector lengths. We merge the code where we can, but unfortunately can't completely merge it because KVM requires all vector lengths, power-of-two or not, smaller than the maximum enabled length to also be enabled. The architecture only requires all the power-of-two lengths, though, so TCG will only enforce that.

---
 target/arm/cpu64.c | 101 ++++++++++++++++++++-------------------------
 1 file changed, 45 insertions(+), 56 deletions(-)
target/arm/cpu64.c +33 -55
index 557fd4757740..9cb41c442600 100644
@@ -329,35 +329,26 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
                     break;
                 }
             }
-            max_vq = vq <= ARM_MAX_VQ ? vq - 1 : ARM_MAX_VQ;
-            bitmap_andnot(cpu->sve_vq_map, cpu->sve_vq_supported,
-                          cpu->sve_vq_init, max_vq);
-            if (max_vq == 0 || bitmap_empty(cpu->sve_vq_map, max_vq)) {
-                error_setg(errp, "cannot disable sve%d", vq * 128);
-                error_append_hint(errp, "Disabling sve%d results in all "
-                                  "vector lengths being disabled.\n",
-                                  vq * 128);
-                error_append_hint(errp, "With SVE enabled, at least one "
-                                  "vector length must be enabled.\n");
-                return;
-            }
         } else {
             /* Disabling a power-of-two disables all larger lengths. */
-            if (test_bit(0, cpu->sve_vq_init)) {
-                error_setg(errp, "cannot disable sve128");
-                error_append_hint(errp, "Disabling sve128 results in all "
-                                  "vector lengths being disabled.\n");
-                error_append_hint(errp, "With SVE enabled, at least one "
-                                  "vector length must be enabled.\n");
-                return;
-            }
-            for (vq = 2; vq <= ARM_MAX_VQ; vq <<= 1) {
+            for (vq = 1; vq <= ARM_MAX_VQ; vq <<= 1) {
                 if (test_bit(vq - 1, cpu->sve_vq_init)) {
                     break;
                 }
             }
-            max_vq = vq <= ARM_MAX_VQ ? vq - 1 : ARM_MAX_VQ;
-            bitmap_complement(cpu->sve_vq_map, cpu->sve_vq_init, max_vq);
+        }
+
+        max_vq = vq <= ARM_MAX_VQ ? vq - 1 : ARM_MAX_VQ;
+        bitmap_andnot(cpu->sve_vq_map, cpu->sve_vq_supported,
+                      cpu->sve_vq_init, max_vq);
+        if (max_vq == 0 || bitmap_empty(cpu->sve_vq_map, max_vq)) {
+            error_setg(errp, "cannot disable sve%d", vq * 128);
+            error_append_hint(errp, "Disabling sve%d results in all "
+                              "vector lengths being disabled.\n",
+                              vq * 128);
+            error_append_hint(errp, "With SVE enabled, at least one "
+                              "vector length must be enabled.\n");
+            return;
         }
 
         max_vq = find_last_bit(cpu->sve_vq_map, max_vq) + 1;
@@ -393,46 +384,44 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
     assert(max_vq != 0);
     bitmap_clear(cpu->sve_vq_map, max_vq, ARM_MAX_VQ - max_vq);
 
-    if (kvm_enabled()) {
-        /* Ensure the set of lengths matches what KVM supports. */
-        bitmap_xor(tmp, cpu->sve_vq_map, cpu->sve_vq_supported, max_vq);
-        if (!bitmap_empty(tmp, max_vq)) {
-            vq = find_last_bit(tmp, max_vq) + 1;
-            if (test_bit(vq - 1, cpu->sve_vq_map)) {
-                if (cpu->sve_max_vq) {
-                    error_setg(errp, "cannot set sve-max-vq=%d",
-                               cpu->sve_max_vq);
-                    error_append_hint(errp, "This KVM host does not support "
-                                      "the vector length %d-bits.\n",
-                                      vq * 128);
-                    error_append_hint(errp, "It may not be possible to use "
-                                      "sve-max-vq with this KVM host. Try "
-                                      "using only sve<N> properties.\n");
-                } else {
-                    error_setg(errp, "cannot enable sve%d", vq * 128);
-                    error_append_hint(errp, "This KVM host does not support "
-                                      "the vector length %d-bits.\n",
-                                      vq * 128);
-                }
+    /* Ensure the set of lengths matches what is supported. */
+    bitmap_xor(tmp, cpu->sve_vq_map, cpu->sve_vq_supported, max_vq);
+    if (!bitmap_empty(tmp, max_vq)) {
+        vq = find_last_bit(tmp, max_vq) + 1;
+        if (test_bit(vq - 1, cpu->sve_vq_map)) {
+            if (cpu->sve_max_vq) {
+                error_setg(errp, "cannot set sve-max-vq=%d", cpu->sve_max_vq);
+                error_append_hint(errp, "This CPU does not support "
+                                  "the vector length %d-bits.\n", vq * 128);
+                error_append_hint(errp, "It may not be possible to use "
+                                  "sve-max-vq with this CPU. Try "
+                                  "using only sve<N> properties.\n");
             } else {
+                error_setg(errp, "cannot enable sve%d", vq * 128);
+                error_append_hint(errp, "This CPU does not support "
+                                  "the vector length %d-bits.\n", vq * 128);
+            }
+            return;
+        } else {
+            if (kvm_enabled()) {
                 error_setg(errp, "cannot disable sve%d", vq * 128);
                 error_append_hint(errp, "The KVM host requires all "
                                   "supported vector lengths smaller "
                                   "than %d bits to also be enabled.\n",
                                   max_vq * 128);
-            }
-            return;
-        }
-    } else {
-        /* Ensure all required powers-of-two are enabled. */
-        for (vq = pow2floor(max_vq); vq >= 1; vq >>= 1) {
-            if (!test_bit(vq - 1, cpu->sve_vq_map)) {
-                error_setg(errp, "cannot disable sve%d", vq * 128);
-                error_append_hint(errp, "sve%d is required as it "
-                                  "is a power-of-two length smaller than "
-                                  "the maximum, sve%d\n",

target/arm/cpu64.c void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) · line 420

Quoted 10 lines
target/arm/cpu64.c +8 -1
-                                  vq * 128, max_vq * 128);
                 return;
+            } else {
+                /* Ensure all required powers-of-two are enabled. */
+                for (vq = pow2floor(max_vq); vq >= 1; vq >>= 1) {
+                    if (!test_bit(vq - 1, cpu->sve_vq_map)) {
+                        error_setg(errp, "cannot disable sve%d", vq * 128);
+                        error_append_hint(errp, "sve%d is required as it "
+                                          "is a power-of-two length smaller "
+                                          " than the maximum, sve%d\n",

When moving 'than' down to avoid going over 80 characters I somehow added a leading space, making two spaces between 'smaller' and 'than'. I'll send a v2 to remove it.

Thanks,
drew

Quoted 10 lines
target/arm/cpu64.c +4 -0
+                                          vq * 128, max_vq * 128);
+                        return;
+                    }
+                }
             }
         }
     }
Signature · 1 line
2.31.1
#9 lore raw
In reply to Andrew Jones
Quoted 8 lines · Andrew Jones

While reviewing the new A64FX CPU type it became clear that CPU types should be able to specify which SVE vector lengths are supported. This series adds a new bitmap member to ARMCPU and modifies arm_cpu_sve_finalize() to validate inputs against it. So far we only need to set the bitmap for the 'max' CPU type though and, since it supports all vector lengths, we just fill the whole thing.

Quoted 7 lines

This series was inspired by Richard Henderson's suggestion to replace arm_cpu_sve_finalize's kvm_supported bitmap with something that could be shared with TCG.

So far I've only lightly tested this. I'll do more testing and report back later. I'd also be happy to get test results from others.

I did more testing and it looks good to me except for the extra space in an error message that I reported in patch 4.

Thanks,
drew

Quoted 18 lines

Thanks,
drew

Andrew Jones (4):
target/arm/cpu: Introduce sve_vq_supported bitmap target/arm/kvm64: Ensure sve vls map is completely clear target/arm/cpu64: Replace kvm_supported with sve_vq_supported target/arm/cpu64: Validate sve vector lengths are supported

 target/arm/cpu.h   |   4 ++
 target/arm/cpu64.c | 118 +++++++++++++++++++++------------------------
 target/arm/kvm64.c |   2 +-
 3 files changed, 61 insertions(+), 63 deletions(-)
Signature · 1 line
2.31.1