Skip to contentSkip to conversation

Questions abount driver development and Geniatech X9320 DVB-S/S2 PCIe Tuner

DISCUSSION [email protected] 1 participant 2 messages Nov 2, 2020 – Nov 5, 2020 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hi,

I'm trying to get Geniatech X9320 DVB-S/S2 PCIe Quad Tuner card working, but i'm new to linux kernel drivers developement

It has a similar hardware configuration as TechnoTrend TT-connect S2-4600

* D720201    USB host controller
* cy68013A   USB bridge (4x)
* m88ds3103  Demodulator (4x)
* m88ts2022  Tuner (4x)

As it seems to me all components are supported by Linux, but they are for another device.

I have taken a look in the dw2102.c driver source code, and I see that there is firmware loaded, my question is: where is this firmware going?: into the cy68013A or m88ds3103 chips? or somewhere else?.

I looked at the site Geniatech, but even that they say there is a Linux driver in the archive the actual implementation is not there.

I hope that there is anyone how can help me to get this card working under Linux.

Kind regards,

Marc Bertens-Nguyen
PE2MBS

#1 lore raw

REPOST: Questions abount driver development and Geniatech X9320 DVB-S/S2 PCIe Tuner

-------- Original Message --------
Subject: Questions abount driver development and Geniatech X9320 DVB-S/S2 PCIe Tuner
Date: 2020-11-02 10:38
From: [email protected]
To: Linux Media <[email protected]>

Hi,

I'm trying to get Geniatech X9320 DVB-S/S2 PCIe Quad Tuner card working, but i'm new to linux kernel drivers developement

It has a similar hardware configuration as TechnoTrend TT-connect S2-4600

* D720201    USB host controller
* cy68013A   USB bridge (4x)
* m88ds3103  Demodulator (4x)
* m88ts2022  Tuner (4x)

As it seems to me all components are supported by Linux, but they are for another device.

I have taken a look in the dw2102.c driver source code, and I see that there is firmware loaded, my question is: where is this firmware going?: into the cy68013A or m88ds3103 chips? or somewhere else?.

I looked at the site Geniatech, but even that they say there is a Linux driver in the archive the actual implementation is not there.

I hope that there is anyone how can help me to get this card working under Linux.

Kind regards,

Marc Bertens-Nguyen
PE2MBS