Skip to contentSkip to conversation

Initial BBML2 support for contpte_convert()

PATCH Superseded Mikołaj Lenczewski 6 participants 24 messages Mar 13, 2025 – Mar 14, 2025

Subsystems (5)

v3 of 8 Superseded Latest is v8 →

lore
Share & tools
lore
#0 lore raw

v3 cover Initial BBML2 support for contpte_convert()

Hi All,

This patch series adds adding initial support for eliding break-before-make requirements on systems that support BBML2 and additionally guarantee to never raise a conflict abort.

This support elides a TLB invalidation in contpte_convert(). This leads to a 12% improvement when executing a microbenchmark designed to force the pathological path where contpte_convert() gets called. This represents an 80% reduction in the cost of calling contpte_convert().

This series is based on v6.14-rc4 (d082ecbc71e9).

Patch 1 implements an allow-list of cpus that support BBML2, but with the additional constraint of never causing TLB conflict aborts. We settled on this constraint because we will use the feature for kernel mappings in the future, for which we cannot handle conflict aborts safely.

Yang Shi has a series at [1] that aims to use BBML2 to enable splitting the linear map at runtime. This series partially overlaps with it to add the cpu feature. We believe this series is fully compatible with Yang's requirements and could go first.

[1]:
https://lore.kernel.org/linux-arm-kernel/[email protected]/

Mikołaj Lenczewski (3):
arm64: Add BBM Level 2 cpu feature iommu/arm: Add BBM Level 2 smmu feature arm64/mm: Elide tlbi in contpte_convert() under BBML2

 .../admin-guide/kernel-parameters.txt         |  3 +
 arch/arm64/Kconfig                            | 11 +++
 arch/arm64/include/asm/cpucaps.h              |  2 +
 arch/arm64/include/asm/cpufeature.h           |  6 ++
 arch/arm64/kernel/cpufeature.c                | 76 +++++++++++++++++++
 arch/arm64/kernel/pi/idreg-override.c         |  2 +
 arch/arm64/mm/contpte.c                       |  3 +-
 arch/arm64/tools/cpucaps                      |  1 +
 .../iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c   |  3 +
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c   |  3 +
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h   |  4 +
 11 files changed, 113 insertions(+), 1 deletion(-)
Signature · 1 line
2.48.1
#1 lore raw

PATCH v3 1/3 arm64: Add BBM Level 2 cpu feature

The Break-Before-Make cpu feature supports multiple levels (levels 0-2), and this commit adds a dedicated BBML2 cpufeature to test against support for, as well as a kernel commandline parameter to optionally disable BBML2 altogether.

This is a system feature as we might have a big.LITTLE architecture where some cores support BBML2 and some don't, but we want all cores to be available and BBM to default to level 0 (as opposed to having cores without BBML2 not coming online).

To support BBML2 in as wide a range of contexts as we can, we want not only the architectural guarantees that BBML2 makes, but additionally want BBML2 to not create TLB conflict aborts. Not causing aborts avoids us having to prove that no recursive faults can be induced in any path that uses BBML2, allowing its use for arbitrary kernel mappings. Support detection of such CPUs.

---
 .../admin-guide/kernel-parameters.txt         |  3 +
 arch/arm64/Kconfig                            | 11 +++
 arch/arm64/include/asm/cpucaps.h              |  2 +
 arch/arm64/include/asm/cpufeature.h           |  6 ++
 arch/arm64/kernel/cpufeature.c                | 76 +++++++++++++++++++
 arch/arm64/kernel/pi/idreg-override.c         |  2 +
 arch/arm64/tools/cpucaps                      |  1 +
 7 files changed, 101 insertions(+)
Documentation/admin-guide/kernel-parameters.txt +3 -0
index fb8752b42ec8..3e4cc917a07e 100644
@@ -453,6 +453,9 @@
 	arm64.no32bit_el0 [ARM64] Unconditionally disable the execution of
 			32 bit applications.
 
+	arm64.nobbml2	[ARM64] Unconditionally disable Break-Before-Make Level
+			2 support
+
 	arm64.nobti	[ARM64] Unconditionally disable Branch Target
 			Identification support
 
arch/arm64/Kconfig +11 -0
index 940343beb3d4..49deda2b22ae 100644
@@ -2057,6 +2057,17 @@ config ARM64_TLB_RANGE
 	  The feature introduces new assembly instructions, and they were
 	  support when binutils >= 2.30.
 
+config ARM64_BBML2_NOABORT
+	bool "Enable support for Break-Before-Make Level 2 detection and usage"
+	default y
+	help
+	  FEAT_BBM provides detection of support levels for break-before-make
+	  sequences. If BBM level 2 is supported, some TLB maintenance requirements
+	  can be relaxed to improve performance. We additonally require the
+	  property that the implementation cannot ever raise TLB Conflict Aborts.
+	  Selecting N causes the kernel to fallback to BBM level 0 behaviour
+	  even if the system supports BBM level 2.
+
 endmenu # "ARMv8.4 architectural features"
 
 menu "ARMv8.5 architectural features"
arch/arm64/include/asm/cpucaps.h +2 -0
index 0b5ca6e0eb09..2d6db33d4e45 100644
@@ -23,6 +23,8 @@ cpucap_is_possible(const unsigned int cap)
 		return IS_ENABLED(CONFIG_ARM64_PAN);
 	case ARM64_HAS_EPAN:
 		return IS_ENABLED(CONFIG_ARM64_EPAN);
+	case ARM64_HAS_BBML2_NOABORT:
+		return IS_ENABLED(CONFIG_ARM64_BBML2_NOABORT);
 	case ARM64_SVE:
 		return IS_ENABLED(CONFIG_ARM64_SVE);
 	case ARM64_SME:
arch/arm64/include/asm/cpufeature.h +6 -0
index e0e4478f5fb5..7f5b220dacde 100644
@@ -18,6 +18,7 @@
 #define ARM64_SW_FEATURE_OVERRIDE_NOKASLR	0
 #define ARM64_SW_FEATURE_OVERRIDE_HVHE		4
 #define ARM64_SW_FEATURE_OVERRIDE_RODATA_OFF	8
+#define ARM64_SW_FEATURE_OVERRIDE_NOBBML2	12
 
 #ifndef __ASSEMBLY__
 
@@ -866,6 +867,11 @@ static __always_inline bool system_supports_mpam_hcr(void)
 	return alternative_has_cap_unlikely(ARM64_MPAM_HCR);
 }
 
+static inline bool system_supports_bbml2_noabort(void)
+{
+	return alternative_has_cap_unlikely(ARM64_HAS_BBML2_NOABORT);
+}
+
 int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt);
 bool try_emulate_mrs(struct pt_regs *regs, u32 isn);
 
arch/arm64/kernel/cpufeature.c +76 -0

88 lines not on this page · raw message

arch/arm64/kernel/pi/idreg-override.c +2 -0
index c6b185b885f7..9728faa10390 100644
@@ -209,6 +209,7 @@ static const struct ftr_set_desc sw_features __prel64_initconst = {
 		FIELD("nokaslr", ARM64_SW_FEATURE_OVERRIDE_NOKASLR, NULL),
 		FIELD("hvhe", ARM64_SW_FEATURE_OVERRIDE_HVHE, hvhe_filter),
 		FIELD("rodataoff", ARM64_SW_FEATURE_OVERRIDE_RODATA_OFF, NULL),
+		FIELD("nobbml2", ARM64_SW_FEATURE_OVERRIDE_NOBBML2, NULL),
 		{}
 	},
 };
@@ -246,6 +247,7 @@ static const struct {
 	{ "rodata=off",			"arm64_sw.rodataoff=1" },
 	{ "arm64.nolva",		"id_aa64mmfr2.varange=0" },
 	{ "arm64.no32bit_el0",		"id_aa64pfr0.el0=1" },
+	{ "arm64.nobbml2",		"arm64_sw.nobbml2=1" },
 };
 
 static int __init parse_hexdigit(const char *p, u64 *v)
arch/arm64/tools/cpucaps +1 -0
index 1e65f2fb45bd..b03a375e5507 100644
@@ -14,6 +14,7 @@ HAS_ADDRESS_AUTH_ARCH_QARMA5
 HAS_ADDRESS_AUTH_IMP_DEF
 HAS_AMU_EXTN
 HAS_ARMv8_4_TTL
+HAS_BBML2_NOABORT
 HAS_CACHE_DIC
 HAS_CACHE_IDC
 HAS_CNP
Signature · 1 line
2.48.1
Reviewed-by on v3 1/3
#2 lore raw

Re: [PATCH v3 1/3] arm64: Add BBM Level 2 cpu feature

Quoted 10 lines · Mikołaj Lenczewski

The Break-Before-Make cpu feature supports multiple levels (levels 0-2), and this commit adds a dedicated BBML2 cpufeature to test against support for, as well as a kernel commandline parameter to optionally disable BBML2 altogether.

This is a system feature as we might have a big.LITTLE architecture where some cores support BBML2 and some don't, but we want all cores to be available and BBM to default to level 0 (as opposed to having cores without BBML2 not coming online).

Quoted 8 lines

To support BBML2 in as wide a range of contexts as we can, we want not only the architectural guarantees that BBML2 makes, but additionally want BBML2 to not create TLB conflict aborts. Not causing aborts avoids us having to prove that no recursive faults can be induced in any path that uses BBML2, allowing its use for arbitrary kernel mappings. Support detection of such CPUs.

I have 2 nits below, but with those resolved:

Quoted 88 lines
---
 .../admin-guide/kernel-parameters.txt         |  3 +
 arch/arm64/Kconfig                            | 11 +++
 arch/arm64/include/asm/cpucaps.h              |  2 +
 arch/arm64/include/asm/cpufeature.h           |  6 ++
 arch/arm64/kernel/cpufeature.c                | 76 +++++++++++++++++++
 arch/arm64/kernel/pi/idreg-override.c         |  2 +
 arch/arm64/tools/cpucaps                      |  1 +
 7 files changed, 101 insertions(+)
Documentation/admin-guide/kernel-parameters.txt +3 -0
index fb8752b42ec8..3e4cc917a07e 100644
@@ -453,6 +453,9 @@
 	arm64.no32bit_el0 [ARM64] Unconditionally disable the execution of
 			32 bit applications.
 
+	arm64.nobbml2	[ARM64] Unconditionally disable Break-Before-Make Level
+			2 support
+
 	arm64.nobti	[ARM64] Unconditionally disable Branch Target
 			Identification support
 
arch/arm64/Kconfig +11 -0
index 940343beb3d4..49deda2b22ae 100644
@@ -2057,6 +2057,17 @@ config ARM64_TLB_RANGE
 	  The feature introduces new assembly instructions, and they were
 	  support when binutils >= 2.30.
 
+config ARM64_BBML2_NOABORT
+	bool "Enable support for Break-Before-Make Level 2 detection and usage"
+	default y
+	help
+	  FEAT_BBM provides detection of support levels for break-before-make
+	  sequences. If BBM level 2 is supported, some TLB maintenance requirements
+	  can be relaxed to improve performance. We additonally require the
+	  property that the implementation cannot ever raise TLB Conflict Aborts.
+	  Selecting N causes the kernel to fallback to BBM level 0 behaviour
+	  even if the system supports BBM level 2.
+
 endmenu # "ARMv8.4 architectural features"
 
 menu "ARMv8.5 architectural features"
arch/arm64/include/asm/cpucaps.h +2 -0
index 0b5ca6e0eb09..2d6db33d4e45 100644
@@ -23,6 +23,8 @@ cpucap_is_possible(const unsigned int cap)
 		return IS_ENABLED(CONFIG_ARM64_PAN);
 	case ARM64_HAS_EPAN:
 		return IS_ENABLED(CONFIG_ARM64_EPAN);
+	case ARM64_HAS_BBML2_NOABORT:
+		return IS_ENABLED(CONFIG_ARM64_BBML2_NOABORT);
 	case ARM64_SVE:
 		return IS_ENABLED(CONFIG_ARM64_SVE);
 	case ARM64_SME:
arch/arm64/include/asm/cpufeature.h +6 -0
index e0e4478f5fb5..7f5b220dacde 100644
@@ -18,6 +18,7 @@
 #define ARM64_SW_FEATURE_OVERRIDE_NOKASLR	0
 #define ARM64_SW_FEATURE_OVERRIDE_HVHE		4
 #define ARM64_SW_FEATURE_OVERRIDE_RODATA_OFF	8
+#define ARM64_SW_FEATURE_OVERRIDE_NOBBML2	12
 
 #ifndef __ASSEMBLY__
 
@@ -866,6 +867,11 @@ static __always_inline bool system_supports_mpam_hcr(void)
 	return alternative_has_cap_unlikely(ARM64_MPAM_HCR);
 }
 
+static inline bool system_supports_bbml2_noabort(void)
+{
+	return alternative_has_cap_unlikely(ARM64_HAS_BBML2_NOABORT);
+}
+
 int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt);
 bool try_emulate_mrs(struct pt_regs *regs, u32 isn);
 
arch/arm64/kernel/cpufeature.c +0 -0
index d561cf3b8ac7..b936e0805161 100644

arch/arm64/kernel/cpufeature.c static bool hvhe_possible(const struct arm64_cpu_capabilities *entry, · line 2181

Quoted 6 lines
arch/arm64/kernel/cpufeature.c +3 -0
@@ -2176,6 +2176,76 @@ static bool hvhe_possible(const struct arm64_cpu_capabilities *entry,
 	return arm64_test_sw_feature_override(ARM64_SW_FEATURE_OVERRIDE_HVHE);
 }
 
+static inline bool bbml2_possible(void)
+{
+	return !arm64_test_sw_feature_override(ARM64_SW_FEATURE_OVERRIDE_NOBBML2);

If you're going to keep this helper, I think it really needs to be:

return IS_ENABLED(CONFIG_ARM64_BBML2_NOABORT) &&

       !arm64_test_sw_feature_override(ARM64_SW_FEATURE_OVERRIDE_NOBBML2);

Then you would simplify the caller to remove it's own IS_ENABLED(CONFIG_ARM64_BBML2_NOABORT) check.

But personally I would remove the helper and just fold the test into has_bbml2_noabort().

Thanks,
Ryan

Quoted 15 lines
arch/arm64/kernel/cpufeature.c +15 -0
+}
+
+static bool cpu_has_bbml2_noabort(unsigned int cpu_midr)
+{
+	/* We want to allow usage of bbml2 in as wide a range of kernel contexts
+	 * as possible. This list is therefore an allow-list of known-good
+	 * implementations that both support bbml2 and additionally, fulfill the
+	 * extra constraint of never generating TLB conflict aborts when using
+	 * the relaxed bbml2 semantics (such aborts make use of bbml2 in certain
+	 * kernel contexts difficult to prove safe against recursive aborts).
+	 *
+	 * Note that implementations can only be considered "known-good" if their
+	 * implementors attest to the fact that the implementation never raises
+	 * TLBI conflict aborts for bbml2 mapping granularity changes.
+	 */

arch/arm64/kernel/cpufeature.c static bool hvhe_possible(const struct arm64_cpu_capabilities *entry, · line 2206

Quoted 10 lines
arch/arm64/kernel/cpufeature.c +10 -0
+	static const struct midr_range supports_bbml2_noabort_list[] = {
+		MIDR_REV_RANGE(MIDR_CORTEX_X4, 0, 3, 0xf),
+		MIDR_REV_RANGE(MIDR_NEOVERSE_V3, 0, 2, 0xf),
+		{}
+	};
+
+	return is_midr_in_range_list(cpu_midr, supports_bbml2_noabort_list);
+}
+
+static inline unsigned int __cpu_read_midr(int cpu)

nit: why the double underscrore prefix?

Quoted 90 lines
arch/arm64/kernel/cpufeature.c +48 -0
+{
+	WARN_ON_ONCE(!cpu_online(cpu));
+
+	return per_cpu(cpu_data, cpu).reg_midr;
+}
+
+static bool has_bbml2_noabort(const struct arm64_cpu_capabilities *caps, int scope)
+{
+	if (!IS_ENABLED(CONFIG_ARM64_BBML2_NOABORT))
+		return false;
+
+	if (!bbml2_possible())
+		return false;
+
+	if (scope & SCOPE_SYSTEM) {
+		int cpu;
+
+		/* We are a boot CPU, and must verify that all enumerated boot
+		 * CPUs have MIDR values within our allowlist. Otherwise, we do
+		 * not allow the BBML2 feature to avoid potential faults when
+		 * the insufficient CPUs access memory regions using BBML2
+		 * semantics.
+		 */
+		for_each_online_cpu(cpu) {
+			if (!cpu_has_bbml2_noabort(__cpu_read_midr(cpu)))
+				return false;
+		}
+
+		return true;
+	} else if (scope & SCOPE_LOCAL_CPU) {
+		/* We are a hot-plugged CPU, so only need to check our MIDR.
+		 * If we have the correct MIDR, but the kernel booted on an
+		 * insufficient CPU, we will not use BBML2 (this is safe). If
+		 * we have an incorrect MIDR, but the kernel booted on a
+		 * sufficient CPU, we will not bring up this CPU.
+		 */
+		return cpu_has_bbml2_noabort(read_cpuid_id());
+	}
+
+	return false;
+}
+
 #ifdef CONFIG_ARM64_PAN
 static void cpu_enable_pan(const struct arm64_cpu_capabilities *__unused)
 {
@@ -2926,6 +2996,12 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, EVT, IMP)
 	},
+	{
+		.desc = "BBM Level 2 without conflict abort",
+		.capability = ARM64_HAS_BBML2_NOABORT,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_bbml2_noabort,
+	},
 	{
 		.desc = "52-bit Virtual Addressing for KVM (LPA2)",
 		.capability = ARM64_HAS_LPA2,
arch/arm64/kernel/pi/idreg-override.c +2 -0
index c6b185b885f7..9728faa10390 100644
@@ -209,6 +209,7 @@ static const struct ftr_set_desc sw_features __prel64_initconst = {
 		FIELD("nokaslr", ARM64_SW_FEATURE_OVERRIDE_NOKASLR, NULL),
 		FIELD("hvhe", ARM64_SW_FEATURE_OVERRIDE_HVHE, hvhe_filter),
 		FIELD("rodataoff", ARM64_SW_FEATURE_OVERRIDE_RODATA_OFF, NULL),
+		FIELD("nobbml2", ARM64_SW_FEATURE_OVERRIDE_NOBBML2, NULL),
 		{}
 	},
 };
@@ -246,6 +247,7 @@ static const struct {
 	{ "rodata=off",			"arm64_sw.rodataoff=1" },
 	{ "arm64.nolva",		"id_aa64mmfr2.varange=0" },
 	{ "arm64.no32bit_el0",		"id_aa64pfr0.el0=1" },
+	{ "arm64.nobbml2",		"arm64_sw.nobbml2=1" },
 };
 
 static int __init parse_hexdigit(const char *p, u64 *v)
arch/arm64/tools/cpucaps +1 -0
index 1e65f2fb45bd..b03a375e5507 100644
@@ -14,6 +14,7 @@ HAS_ADDRESS_AUTH_ARCH_QARMA5
 HAS_ADDRESS_AUTH_IMP_DEF
 HAS_AMU_EXTN
 HAS_ARMv8_4_TTL
+HAS_BBML2_NOABORT
 HAS_CACHE_DIC
 HAS_CACHE_IDC
 HAS_CNP
#3 lore raw

Re: [PATCH v3 1/3] arm64: Add BBM Level 2 cpu feature

Quoted 18 lines · Ryan Roberts

arch/arm64/kernel/cpufeature.c static bool hvhe_possible(const struct arm64_cpu_capabilities *entry, · line 2181

Quoted 11 lines · Mikołaj Lenczewski
arch/arm64/kernel/cpufeature.c +3 -0
index d561cf3b8ac7..b936e0805161 100644
@@ -2176,6 +2176,76 @@ static bool hvhe_possible(const struct arm64_cpu_capabilities *entry,
 	return arm64_test_sw_feature_override(ARM64_SW_FEATURE_OVERRIDE_HVHE);
 }
 
+static inline bool bbml2_possible(void)
+{
+	return !arm64_test_sw_feature_override(ARM64_SW_FEATURE_OVERRIDE_NOBBML2);

If you're going to keep this helper, I think it really needs to be:

return IS_ENABLED(CONFIG_ARM64_BBML2_NOABORT) &&

       !arm64_test_sw_feature_override(ARM64_SW_FEATURE_OVERRIDE_NOBBML2);
Quoted 8 lines

Then you would simplify the caller to remove it's own IS_ENABLED(CONFIG_ARM64_BBML2_NOABORT) check.

But personally I would remove the helper and just fold the test into has_bbml2_noabort().

Thanks,
Ryan

I was debating folding it into has_bbml2_noabort(), but went ahead and implemented it separately to match hvhe_possible(), which was another sw feature helper.

But I agree, folding it will be simpler and read just as easily (if not easier). Will do so.

Quoted 19 lines
Quoted 19 lines
arch/arm64/kernel/cpufeature.c +19 -0
+}
+
+static bool cpu_has_bbml2_noabort(unsigned int cpu_midr)
+{
+	/* We want to allow usage of bbml2 in as wide a range of kernel contexts
+	 * as possible. This list is therefore an allow-list of known-good
+	 * implementations that both support bbml2 and additionally, fulfill the
+	 * extra constraint of never generating TLB conflict aborts when using
+	 * the relaxed bbml2 semantics (such aborts make use of bbml2 in certain
+	 * kernel contexts difficult to prove safe against recursive aborts).
+	 *
+	 * Note that implementations can only be considered "known-good" if their
+	 * implementors attest to the fact that the implementation never raises
+	 * TLBI conflict aborts for bbml2 mapping granularity changes.
+	 */
+	static const struct midr_range supports_bbml2_noabort_list[] = {
+		MIDR_REV_RANGE(MIDR_CORTEX_X4, 0, 3, 0xf),
+		MIDR_REV_RANGE(MIDR_NEOVERSE_V3, 0, 2, 0xf),
+		{}
Quoted 8 lines

arch/arm64/kernel/cpufeature.c static bool hvhe_possible(const struct arm64_cpu_capabilities *entry, · line 2206

Quoted 6 lines
arch/arm64/kernel/cpufeature.c +6 -0
+	};
+
+	return is_midr_in_range_list(cpu_midr, supports_bbml2_noabort_list);
+}
+
+static inline unsigned int __cpu_read_midr(int cpu)

nit: why the double underscrore prefix?

Again copying other helpers I saw that seemed to do similar things. Didn't know if this was the expected style, so did as other helpers did. Will remove.

Thank you for the review.

Signature · 2 lines
Kind regards,
Mikołaj Lenczewski
#4 lore raw

Re: [PATCH v3 1/3] arm64: Add BBM Level 2 cpu feature

Quoted 25 lines · Mikołaj Lenczewski
Quoted 24 lines · Ryan Roberts

arch/arm64/kernel/cpufeature.c static bool hvhe_possible(const struct arm64_cpu_capabilities *entry, · line 2181

Quoted 11 lines · Mikołaj Lenczewski
arch/arm64/kernel/cpufeature.c +3 -0
index d561cf3b8ac7..b936e0805161 100644
@@ -2176,6 +2176,76 @@ static bool hvhe_possible(const struct arm64_cpu_capabilities *entry,
 	return arm64_test_sw_feature_override(ARM64_SW_FEATURE_OVERRIDE_HVHE);
 }
 
+static inline bool bbml2_possible(void)
+{
+	return !arm64_test_sw_feature_override(ARM64_SW_FEATURE_OVERRIDE_NOBBML2);

If you're going to keep this helper, I think it really needs to be:

return IS_ENABLED(CONFIG_ARM64_BBML2_NOABORT) &&

       !arm64_test_sw_feature_override(ARM64_SW_FEATURE_OVERRIDE_NOBBML2);

Then you would simplify the caller to remove it's own IS_ENABLED(CONFIG_ARM64_BBML2_NOABORT) check.

But personally I would remove the helper and just fold the test into has_bbml2_noabort().

Quoted 6 lines
Quoted 2 lines

Thanks,
Ryan

I was debating folding it into has_bbml2_noabort(), but went ahead and implemented it separately to match hvhe_possible(), which was another sw feature helper.

hvhe_possible() is a .matches function, so there is nothing to fold it into.

Quoted 32 lines

But I agree, folding it will be simpler and read just as easily (if not easier). Will do so.

Quoted 19 lines
Quoted 19 lines
arch/arm64/kernel/cpufeature.c +19 -0
+}
+
+static bool cpu_has_bbml2_noabort(unsigned int cpu_midr)
+{
+	/* We want to allow usage of bbml2 in as wide a range of kernel contexts
+	 * as possible. This list is therefore an allow-list of known-good
+	 * implementations that both support bbml2 and additionally, fulfill the
+	 * extra constraint of never generating TLB conflict aborts when using
+	 * the relaxed bbml2 semantics (such aborts make use of bbml2 in certain
+	 * kernel contexts difficult to prove safe against recursive aborts).
+	 *
+	 * Note that implementations can only be considered "known-good" if their
+	 * implementors attest to the fact that the implementation never raises
+	 * TLBI conflict aborts for bbml2 mapping granularity changes.
+	 */
+	static const struct midr_range supports_bbml2_noabort_list[] = {
+		MIDR_REV_RANGE(MIDR_CORTEX_X4, 0, 3, 0xf),
+		MIDR_REV_RANGE(MIDR_NEOVERSE_V3, 0, 2, 0xf),
+		{}
Quoted 8 lines

arch/arm64/kernel/cpufeature.c static bool hvhe_possible(const struct arm64_cpu_capabilities *entry, · line 2206

Quoted 6 lines
arch/arm64/kernel/cpufeature.c +6 -0
+	};
+
+	return is_midr_in_range_list(cpu_midr, supports_bbml2_noabort_list);
+}
+
+static inline unsigned int __cpu_read_midr(int cpu)

nit: why the double underscrore prefix?

Quoted 3 lines

Again copying other helpers I saw that seemed to do similar things. Didn't know if this was the expected style, so did as other helpers did. Will remove.

Often those double underscores are used when you have a public function wrapping into a private function, like this:

static void __do_a_thing(bool modify_behaviour_in_some_way);

void do_a_thing(void)

{
	__do_a_thing(false);
}

I'm sure the coding style offers a better explanation.

Thanks,
Ryan

Quoted 3 lines

Thank you for the review.

#5 lore raw

Re: [PATCH v3 1/3] arm64: Add BBM Level 2 cpu feature

In reply to Mikołaj Lenczewski
Quoted 33 lines · Mikołaj Lenczewski

The Break-Before-Make cpu feature supports multiple levels (levels 0-2), and this commit adds a dedicated BBML2 cpufeature to test against support for, as well as a kernel commandline parameter to optionally disable BBML2 altogether.

This is a system feature as we might have a big.LITTLE architecture where some cores support BBML2 and some don't, but we want all cores to be available and BBM to default to level 0 (as opposed to having cores without BBML2 not coming online).

To support BBML2 in as wide a range of contexts as we can, we want not only the architectural guarantees that BBML2 makes, but additionally want BBML2 to not create TLB conflict aborts. Not causing aborts avoids us having to prove that no recursive faults can be induced in any path that uses BBML2, allowing its use for arbitrary kernel mappings. Support detection of such CPUs.

---
  .../admin-guide/kernel-parameters.txt         |  3 +
  arch/arm64/Kconfig                            | 11 +++
  arch/arm64/include/asm/cpucaps.h              |  2 +
  arch/arm64/include/asm/cpufeature.h           |  6 ++
  arch/arm64/kernel/cpufeature.c                | 76 +++++++++++++++++++
  arch/arm64/kernel/pi/idreg-override.c         |  2 +
  arch/arm64/tools/cpucaps                      |  1 +
  7 files changed, 101 insertions(+)
Documentation/admin-guide/kernel-parameters.txt +0 -0
index fb8752b42ec8..3e4cc917a07e 100644

Documentation/admin-guide/kernel-parameters.txt line 457

Quoted 5 lines
Documentation/admin-guide/kernel-parameters.txt +2 -0
@@ -453,6 +453,9 @@
  	arm64.no32bit_el0 [ARM64] Unconditionally disable the execution of
  			32 bit applications.
 
+	arm64.nobbml2	[ARM64] Unconditionally disable Break-Before-Make Level
+			2 support

Hi Miko,

A question about the kernel boot parameter. Can this parameter be used in early boot stage? A quick look at the code shows it should be ok, for example, cpu_has_bti() is called in map_kernel(). But I'd like to double check because my patchset needs to check this parameter in map_mem() to determine whether large block mapping can be used or not.

And a nit below.

Quoted 68 lines
Documentation/admin-guide/kernel-parameters.txt +1 -0
+
  	arm64.nobti	[ARM64] Unconditionally disable Branch Target
  			Identification support
 
arch/arm64/Kconfig +11 -0
index 940343beb3d4..49deda2b22ae 100644
@@ -2057,6 +2057,17 @@ config ARM64_TLB_RANGE
  	  The feature introduces new assembly instructions, and they were
  	  support when binutils >= 2.30.
 
+config ARM64_BBML2_NOABORT
+	bool "Enable support for Break-Before-Make Level 2 detection and usage"
+	default y
+	help
+	  FEAT_BBM provides detection of support levels for break-before-make
+	  sequences. If BBM level 2 is supported, some TLB maintenance requirements
+	  can be relaxed to improve performance. We additonally require the
+	  property that the implementation cannot ever raise TLB Conflict Aborts.
+	  Selecting N causes the kernel to fallback to BBM level 0 behaviour
+	  even if the system supports BBM level 2.
+
  endmenu # "ARMv8.4 architectural features"
 
  menu "ARMv8.5 architectural features"
arch/arm64/include/asm/cpucaps.h +2 -0
index 0b5ca6e0eb09..2d6db33d4e45 100644
@@ -23,6 +23,8 @@ cpucap_is_possible(const unsigned int cap)
  		return IS_ENABLED(CONFIG_ARM64_PAN);
  	case ARM64_HAS_EPAN:
  		return IS_ENABLED(CONFIG_ARM64_EPAN);
+	case ARM64_HAS_BBML2_NOABORT:
+		return IS_ENABLED(CONFIG_ARM64_BBML2_NOABORT);
  	case ARM64_SVE:
  		return IS_ENABLED(CONFIG_ARM64_SVE);
  	case ARM64_SME:
arch/arm64/include/asm/cpufeature.h +6 -0
index e0e4478f5fb5..7f5b220dacde 100644
@@ -18,6 +18,7 @@
  #define ARM64_SW_FEATURE_OVERRIDE_NOKASLR	0
  #define ARM64_SW_FEATURE_OVERRIDE_HVHE		4
  #define ARM64_SW_FEATURE_OVERRIDE_RODATA_OFF	8
+#define ARM64_SW_FEATURE_OVERRIDE_NOBBML2	12
 
  #ifndef __ASSEMBLY__
 
@@ -866,6 +867,11 @@ static __always_inline bool system_supports_mpam_hcr(void)
  	return alternative_has_cap_unlikely(ARM64_MPAM_HCR);
  }
 
+static inline bool system_supports_bbml2_noabort(void)
+{
+	return alternative_has_cap_unlikely(ARM64_HAS_BBML2_NOABORT);
+}
+
  int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt);
  bool try_emulate_mrs(struct pt_regs *regs, u32 isn);
 
arch/arm64/kernel/cpufeature.c +0 -0
index d561cf3b8ac7..b936e0805161 100644

arch/arm64/kernel/cpufeature.c static bool hvhe_possible(const struct arm64_cpu_capabilities *entry, · line 2182

Quoted 7 lines
arch/arm64/kernel/cpufeature.c +4 -0
@@ -2176,6 +2176,76 @@ static bool hvhe_possible(const struct arm64_cpu_capabilities *entry,
  	return arm64_test_sw_feature_override(ARM64_SW_FEATURE_OVERRIDE_HVHE);
  }
 
+static inline bool bbml2_possible(void)
+{
+	return !arm64_test_sw_feature_override(ARM64_SW_FEATURE_OVERRIDE_NOBBML2);
+}

Can this be moved to cpufeature.h? My patch will use this, anyway I can do it in my patchset.

Thanks,
Yang

Quoted 114 lines
arch/arm64/kernel/cpufeature.c +72 -0
+
+static bool cpu_has_bbml2_noabort(unsigned int cpu_midr)
+{
+	/* We want to allow usage of bbml2 in as wide a range of kernel contexts
+	 * as possible. This list is therefore an allow-list of known-good
+	 * implementations that both support bbml2 and additionally, fulfill the
+	 * extra constraint of never generating TLB conflict aborts when using
+	 * the relaxed bbml2 semantics (such aborts make use of bbml2 in certain
+	 * kernel contexts difficult to prove safe against recursive aborts).
+	 *
+	 * Note that implementations can only be considered "known-good" if their
+	 * implementors attest to the fact that the implementation never raises
+	 * TLBI conflict aborts for bbml2 mapping granularity changes.
+	 */
+	static const struct midr_range supports_bbml2_noabort_list[] = {
+		MIDR_REV_RANGE(MIDR_CORTEX_X4, 0, 3, 0xf),
+		MIDR_REV_RANGE(MIDR_NEOVERSE_V3, 0, 2, 0xf),
+		{}
+	};
+
+	return is_midr_in_range_list(cpu_midr, supports_bbml2_noabort_list);
+}
+
+static inline unsigned int __cpu_read_midr(int cpu)
+{
+	WARN_ON_ONCE(!cpu_online(cpu));
+
+	return per_cpu(cpu_data, cpu).reg_midr;
+}
+
+static bool has_bbml2_noabort(const struct arm64_cpu_capabilities *caps, int scope)
+{
+	if (!IS_ENABLED(CONFIG_ARM64_BBML2_NOABORT))
+		return false;
+
+	if (!bbml2_possible())
+		return false;
+
+	if (scope & SCOPE_SYSTEM) {
+		int cpu;
+
+		/* We are a boot CPU, and must verify that all enumerated boot
+		 * CPUs have MIDR values within our allowlist. Otherwise, we do
+		 * not allow the BBML2 feature to avoid potential faults when
+		 * the insufficient CPUs access memory regions using BBML2
+		 * semantics.
+		 */
+		for_each_online_cpu(cpu) {
+			if (!cpu_has_bbml2_noabort(__cpu_read_midr(cpu)))
+				return false;
+		}
+
+		return true;
+	} else if (scope & SCOPE_LOCAL_CPU) {
+		/* We are a hot-plugged CPU, so only need to check our MIDR.
+		 * If we have the correct MIDR, but the kernel booted on an
+		 * insufficient CPU, we will not use BBML2 (this is safe). If
+		 * we have an incorrect MIDR, but the kernel booted on a
+		 * sufficient CPU, we will not bring up this CPU.
+		 */
+		return cpu_has_bbml2_noabort(read_cpuid_id());
+	}
+
+	return false;
+}
+
  #ifdef CONFIG_ARM64_PAN
  static void cpu_enable_pan(const struct arm64_cpu_capabilities *__unused)
  {
@@ -2926,6 +2996,12 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
  		.matches = has_cpuid_feature,
  		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, EVT, IMP)
  	},
+	{
+		.desc = "BBM Level 2 without conflict abort",
+		.capability = ARM64_HAS_BBML2_NOABORT,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_bbml2_noabort,
+	},
  	{
  		.desc = "52-bit Virtual Addressing for KVM (LPA2)",
  		.capability = ARM64_HAS_LPA2,
arch/arm64/kernel/pi/idreg-override.c +2 -0
index c6b185b885f7..9728faa10390 100644
@@ -209,6 +209,7 @@ static const struct ftr_set_desc sw_features __prel64_initconst = {
  		FIELD("nokaslr", ARM64_SW_FEATURE_OVERRIDE_NOKASLR, NULL),
  		FIELD("hvhe", ARM64_SW_FEATURE_OVERRIDE_HVHE, hvhe_filter),
  		FIELD("rodataoff", ARM64_SW_FEATURE_OVERRIDE_RODATA_OFF, NULL),
+		FIELD("nobbml2", ARM64_SW_FEATURE_OVERRIDE_NOBBML2, NULL),
  		{}
  	},
  };
@@ -246,6 +247,7 @@ static const struct {
  	{ "rodata=off",			"arm64_sw.rodataoff=1" },
  	{ "arm64.nolva",		"id_aa64mmfr2.varange=0" },
  	{ "arm64.no32bit_el0",		"id_aa64pfr0.el0=1" },
+	{ "arm64.nobbml2",		"arm64_sw.nobbml2=1" },
  };
 
  static int __init parse_hexdigit(const char *p, u64 *v)
arch/arm64/tools/cpucaps +1 -0
index 1e65f2fb45bd..b03a375e5507 100644
@@ -14,6 +14,7 @@ HAS_ADDRESS_AUTH_ARCH_QARMA5
  HAS_ADDRESS_AUTH_IMP_DEF
  HAS_AMU_EXTN
  HAS_ARMv8_4_TTL
+HAS_BBML2_NOABORT
  HAS_CACHE_DIC
  HAS_CACHE_IDC
  HAS_CNP
#6 lore raw

Re: [PATCH v3 1/3] arm64: Add BBM Level 2 cpu feature

Quoted 14 lines · Yang Shi

Documentation/admin-guide/kernel-parameters.txt line 457

Quoted 10 lines · Mikołaj Lenczewski
Documentation/admin-guide/kernel-parameters.txt +2 -0
index fb8752b42ec8..3e4cc917a07e 100644
@@ -453,6 +453,9 @@
  	arm64.no32bit_el0 [ARM64] Unconditionally disable the execution of
  			32 bit applications.
 
+	arm64.nobbml2	[ARM64] Unconditionally disable Break-Before-Make Level
+			2 support

Hi Miko,

Quoted 7 lines

A question about the kernel boot parameter. Can this parameter be used in early boot stage? A quick look at the code shows it should be ok, for example, cpu_has_bti() is called in map_kernel(). But I'd like to double check because my patchset needs to check this parameter in map_mem() to determine whether large block mapping can be used or not.

And a nit below.

I will need to double check exactly when the arm64 software overrides are finalised, but as long as those values are finalised in / before (?) the early boot stage then it should be fine? Will reply again once I check and have an answer.

Quoted 10 lines

Documentation/admin-guide/kernel-parameters.txt line 461

Quoted 4 lines
Documentation/admin-guide/kernel-parameters.txt +4 -0
+static inline bool bbml2_possible(void)
+{
+	return !arm64_test_sw_feature_override(ARM64_SW_FEATURE_OVERRIDE_NOBBML2);
+}

Can this be moved to cpufeature.h? My patch will use this, anyway I can do it in my patchset.

Thanks,
Yang

I can do so. In fact, on second thought, I will probably extend this to also include the IS_ENABLED(CONFIG_ARM64_BBML2_NOABORT) check as well, and then move it to cpufeature.h, instead of folding said check into has_bbml2_noabort().

Signature · 2 lines
Kind regards,
Mikołaj Lenczewski
#7 lore raw

Re: [PATCH v3 1/3] arm64: Add BBM Level 2 cpu feature

Quoted 21 lines · Mikołaj Lenczewski
Quoted 20 lines · Yang Shi

Documentation/admin-guide/kernel-parameters.txt line 457

Quoted 10 lines · Mikołaj Lenczewski
Documentation/admin-guide/kernel-parameters.txt +2 -0
index fb8752b42ec8..3e4cc917a07e 100644
@@ -453,6 +453,9 @@
  	arm64.no32bit_el0 [ARM64] Unconditionally disable the execution of
  			32 bit applications.
 
+	arm64.nobbml2	[ARM64] Unconditionally disable Break-Before-Make Level
+			2 support

Hi Miko,

A question about the kernel boot parameter. Can this parameter be used in early boot stage? A quick look at the code shows it should be ok, for example, cpu_has_bti() is called in map_kernel(). But I'd like to double check because my patchset needs to check this parameter in map_mem() to determine whether large block mapping can be used or not.

Quoted 6 lines
Quoted 1 line

And a nit below.

I will need to double check exactly when the arm64 software overrides are finalised, but as long as those values are finalised in / before (?) the early boot stage then it should be fine? Will reply again once I check and have an answer.

This will work fine. The override is setup in the PI code before start_kernel().

Quoted 8 lines
Quoted 8 lines

Documentation/admin-guide/kernel-parameters.txt line 461

Quoted 5 lines
Documentation/admin-guide/kernel-parameters.txt +4 -0
+static inline bool bbml2_possible(void)
+{
+	return !arm64_test_sw_feature_override(ARM64_SW_FEATURE_OVERRIDE_NOBBML2);
+}

Can this be moved to cpufeature.h? My patch will use this, anyway I can do it in my patchset.

I'd prefer to do the moving as part of the series that needs it moved.

Thanks,
Ryan

Quoted 9 lines
Quoted 3 lines

Thanks,
Yang

I can do so. In fact, on second thought, I will probably extend this to also include the IS_ENABLED(CONFIG_ARM64_BBML2_NOABORT) check as well, and then move it to cpufeature.h, instead of folding said check into has_bbml2_noabort().

#8 lore raw

Re: [PATCH v3 1/3] arm64: Add BBM Level 2 cpu feature

In reply to Mikołaj Lenczewski
Quoted 14 lines · Mikołaj Lenczewski
arch/arm64/kernel/pi/idreg-override.c +1 -0
index c6b185b885f7..9728faa10390 100644
@@ -209,6 +209,7 @@ static const struct ftr_set_desc sw_features __prel64_initconst = {
 		FIELD("nokaslr", ARM64_SW_FEATURE_OVERRIDE_NOKASLR, NULL),
 		FIELD("hvhe", ARM64_SW_FEATURE_OVERRIDE_HVHE, hvhe_filter),
 		FIELD("rodataoff", ARM64_SW_FEATURE_OVERRIDE_RODATA_OFF, NULL),
+		FIELD("nobbml2", ARM64_SW_FEATURE_OVERRIDE_NOBBML2, NULL),
 		{}
 	},
 };

arch/arm64/kernel/pi/idreg-override.c static const struct { · line 250

Quoted 4 lines
arch/arm64/kernel/pi/idreg-override.c +1 -0
@@ -246,6 +247,7 @@ static const struct {
 	{ "rodata=off",			"arm64_sw.rodataoff=1" },
 	{ "arm64.nolva",		"id_aa64mmfr2.varange=0" },
 	{ "arm64.no32bit_el0",		"id_aa64pfr0.el0=1" },
+	{ "arm64.nobbml2",		"arm64_sw.nobbml2=1" },

Why is that a SW feature? This looks very much like a HW feature to me, and you should instead mask out ID_AA64MMFR2_EL1.BBM, and be done with it. Something like:

arch/arm64/kernel/pi/idreg-override.c +2 -0
index c6b185b885f70..803a0c99f7b46 100644
@@ -102,6 +102,7 @@ static const struct ftr_set_desc mmfr2 __prel64_initconst = {
 	.override	= &id_aa64mmfr2_override,
 	.fields		= {
 		FIELD("varange", ID_AA64MMFR2_EL1_VARange_SHIFT, mmfr2_varange_filter),
+		FIELD("bbm", ID_AA64MMFR2_EL1_BBM_SHIFT, NULL),
 		{}
 	},
 };
@@ -246,6 +247,7 @@ static const struct {
 	{ "rodata=off",			"arm64_sw.rodataoff=1" },
 	{ "arm64.nolva",		"id_aa64mmfr2.varange=0" },
 	{ "arm64.no32bit_el0",		"id_aa64pfr0.el0=1" },
+	{ "arm64.nobbml2",		"id_aa64mmfr2.bbm=0" },
 };
 
 static int __init parse_hexdigit(const char *p, u64 *v)

Thanks,

	M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
#9 lore raw

Re: [PATCH v3 1/3] arm64: Add BBM Level 2 cpu feature

Quoted 47 lines · Marc Zyngier
Quoted 14 lines · Mikołaj Lenczewski
arch/arm64/kernel/pi/idreg-override.c +1 -0
index c6b185b885f7..9728faa10390 100644
@@ -209,6 +209,7 @@ static const struct ftr_set_desc sw_features __prel64_initconst = {
 		FIELD("nokaslr", ARM64_SW_FEATURE_OVERRIDE_NOKASLR, NULL),
 		FIELD("hvhe", ARM64_SW_FEATURE_OVERRIDE_HVHE, hvhe_filter),
 		FIELD("rodataoff", ARM64_SW_FEATURE_OVERRIDE_RODATA_OFF, NULL),
+		FIELD("nobbml2", ARM64_SW_FEATURE_OVERRIDE_NOBBML2, NULL),
 		{}
 	},
 };

arch/arm64/kernel/pi/idreg-override.c static const struct { · line 250

Quoted 4 lines
arch/arm64/kernel/pi/idreg-override.c +1 -0
@@ -246,6 +247,7 @@ static const struct {
 	{ "rodata=off",			"arm64_sw.rodataoff=1" },
 	{ "arm64.nolva",		"id_aa64mmfr2.varange=0" },
 	{ "arm64.no32bit_el0",		"id_aa64pfr0.el0=1" },
+	{ "arm64.nobbml2",		"arm64_sw.nobbml2=1" },

Why is that a SW feature? This looks very much like a HW feature to me, and you should instead mask out ID_AA64MMFR2_EL1.BBM, and be done with it. Something like:

arch/arm64/kernel/pi/idreg-override.c +2 -0
index c6b185b885f70..803a0c99f7b46 100644
@@ -102,6 +102,7 @@ static const struct ftr_set_desc mmfr2 __prel64_initconst = {
 	.override	= &id_aa64mmfr2_override,
 	.fields		= {
 		FIELD("varange", ID_AA64MMFR2_EL1_VARange_SHIFT, mmfr2_varange_filter),
+		FIELD("bbm", ID_AA64MMFR2_EL1_BBM_SHIFT, NULL),
 		{}
 	},
 };
@@ -246,6 +247,7 @@ static const struct {
 	{ "rodata=off",			"arm64_sw.rodataoff=1" },
 	{ "arm64.nolva",		"id_aa64mmfr2.varange=0" },
 	{ "arm64.no32bit_el0",		"id_aa64pfr0.el0=1" },
+	{ "arm64.nobbml2",		"id_aa64mmfr2.bbm=0" },
 };
 
 static int __init parse_hexdigit(const char *p, u64 *v)
Quoted 6 lines

Thanks,

	M.
Signature · 1 line
Without deviation from the norm, progress is not possible.

Thanks for the review.

I think part of this confusion is due to me not including a changelog (definitely something for the next respin!), but the discussion this change is based on is found here:

https://lore.kernel.org/all/[email protected]/

Essentially, this is a SW feature because we do not check the id_aa64mmfr2.bbm register as part of the has_bbml2_noabort() cpucap matches filter. This is because certain hardware implementations do not actually declare bbml2 via the hardware feature register, despite implementing our bbml2_noabort feature, and certain hypervisor setups might result in issues so we want to have an override to allow potentially disabling the feature for generic kernels.

Signature · 2 lines
Kind regards,
Mikołaj Lenczewski
#10 lore raw

Re: [PATCH v3 1/3] arm64: Add BBM Level 2 cpu feature

Quoted 64 lines · Mikołaj Lenczewski
Quoted 47 lines · Marc Zyngier
Quoted 14 lines · Mikołaj Lenczewski
arch/arm64/kernel/pi/idreg-override.c +1 -0
index c6b185b885f7..9728faa10390 100644
@@ -209,6 +209,7 @@ static const struct ftr_set_desc sw_features __prel64_initconst = {
 		FIELD("nokaslr", ARM64_SW_FEATURE_OVERRIDE_NOKASLR, NULL),
 		FIELD("hvhe", ARM64_SW_FEATURE_OVERRIDE_HVHE, hvhe_filter),
 		FIELD("rodataoff", ARM64_SW_FEATURE_OVERRIDE_RODATA_OFF, NULL),
+		FIELD("nobbml2", ARM64_SW_FEATURE_OVERRIDE_NOBBML2, NULL),
 		{}
 	},
 };

arch/arm64/kernel/pi/idreg-override.c static const struct { · line 250

Quoted 4 lines
arch/arm64/kernel/pi/idreg-override.c +1 -0
@@ -246,6 +247,7 @@ static const struct {
 	{ "rodata=off",			"arm64_sw.rodataoff=1" },
 	{ "arm64.nolva",		"id_aa64mmfr2.varange=0" },
 	{ "arm64.no32bit_el0",		"id_aa64pfr0.el0=1" },
+	{ "arm64.nobbml2",		"arm64_sw.nobbml2=1" },

Why is that a SW feature? This looks very much like a HW feature to me, and you should instead mask out ID_AA64MMFR2_EL1.BBM, and be done with it. Something like:

arch/arm64/kernel/pi/idreg-override.c +2 -0
index c6b185b885f70..803a0c99f7b46 100644
@@ -102,6 +102,7 @@ static const struct ftr_set_desc mmfr2 __prel64_initconst = {
 	.override	= &id_aa64mmfr2_override,
 	.fields		= {
 		FIELD("varange", ID_AA64MMFR2_EL1_VARange_SHIFT, mmfr2_varange_filter),
+		FIELD("bbm", ID_AA64MMFR2_EL1_BBM_SHIFT, NULL),
 		{}
 	},
 };
@@ -246,6 +247,7 @@ static const struct {
 	{ "rodata=off",			"arm64_sw.rodataoff=1" },
 	{ "arm64.nolva",		"id_aa64mmfr2.varange=0" },
 	{ "arm64.no32bit_el0",		"id_aa64pfr0.el0=1" },
+	{ "arm64.nobbml2",		"id_aa64mmfr2.bbm=0" },
 };
 
 static int __init parse_hexdigit(const char *p, u64 *v)
Quoted 6 lines

Thanks,

	M.
Signature · 1 line
Without deviation from the norm, progress is not possible.

Thanks for the review.

I think part of this confusion is due to me not including a changelog (definitely something for the next respin!), but the discussion this change is based on is found here:

https://lore.kernel.org/all/[email protected]/

Quoted 7 lines

Essentially, this is a SW feature because we do not check the id_aa64mmfr2.bbm register as part of the has_bbml2_noabort() cpucap matches filter. This is because certain hardware implementations do not actually declare bbml2 via the hardware feature register, despite implementing our bbml2_noabort feature, and certain hypervisor setups might result in issues so we want to have an override to allow potentially disabling the feature for generic kernels.

I replied to Ryan on the same subject: not advertising a feature that is actually supported is very much an erratum, and we should not conflate feature control of an architecture feature (which is what the ID override horror is doing) with implementation-specific workarounds.

Thanks,

	M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
#11 lore raw

Re: [PATCH v3 1/3] arm64: Add BBM Level 2 cpu feature

In reply to Marc Zyngier
Quoted 16 lines · Marc Zyngier
Quoted 14 lines · Mikołaj Lenczewski
arch/arm64/kernel/pi/idreg-override.c +1 -0
index c6b185b885f7..9728faa10390 100644
@@ -209,6 +209,7 @@ static const struct ftr_set_desc sw_features __prel64_initconst = {
 		FIELD("nokaslr", ARM64_SW_FEATURE_OVERRIDE_NOKASLR, NULL),
 		FIELD("hvhe", ARM64_SW_FEATURE_OVERRIDE_HVHE, hvhe_filter),
 		FIELD("rodataoff", ARM64_SW_FEATURE_OVERRIDE_RODATA_OFF, NULL),
+		FIELD("nobbml2", ARM64_SW_FEATURE_OVERRIDE_NOBBML2, NULL),
 		{}
 	},
 };
@@ -246,6 +247,7 @@ static const struct {
Quoted 8 lines

arch/arm64/kernel/pi/idreg-override.c static const struct {

Quoted 4 lines
arch/arm64/kernel/pi/idreg-override.c +1 -0
 	{ "rodata=off",			"arm64_sw.rodataoff=1" },
 	{ "arm64.nolva",		"id_aa64mmfr2.varange=0" },
 	{ "arm64.no32bit_el0",		"id_aa64pfr0.el0=1" },
+	{ "arm64.nobbml2",		"arm64_sw.nobbml2=1" },

Why is that a SW feature? This looks very much like a HW feature to me, and you should instead mask out ID_AA64MMFR2_EL1.BBM, and be done with it. Something like:

I think this implies that we would expect the BBM field to be advertising BBML2 support normally and we would check for that as part of the cpufeature detection. That's how Miko was doing it in v2, but Yang pointed out that AmpereOne, which supports BBML2+NOABORT semantics, doesn't actually advertise BBML2 in its MMFR2. So we don't want to check that field, and instead rely solely on the MIDR allow-list + a command line override. It was me that suggested putting that in the SW feature register, and I think that still sounds like the right solution for this situation?

Thanks,
Ryan

Quoted 27 lines
arch/arm64/kernel/pi/idreg-override.c +2 -0
index c6b185b885f70..803a0c99f7b46 100644
@@ -102,6 +102,7 @@ static const struct ftr_set_desc mmfr2 __prel64_initconst = {
 	.override	= &id_aa64mmfr2_override,
 	.fields		= {
 		FIELD("varange", ID_AA64MMFR2_EL1_VARange_SHIFT, mmfr2_varange_filter),
+		FIELD("bbm", ID_AA64MMFR2_EL1_BBM_SHIFT, NULL),
 		{}
 	},
 };
@@ -246,6 +247,7 @@ static const struct {
 	{ "rodata=off",			"arm64_sw.rodataoff=1" },
 	{ "arm64.nolva",		"id_aa64mmfr2.varange=0" },
 	{ "arm64.no32bit_el0",		"id_aa64pfr0.el0=1" },
+	{ "arm64.nobbml2",		"id_aa64mmfr2.bbm=0" },
 };
 
 static int __init parse_hexdigit(const char *p, u64 *v)

Thanks,

	M.
#12 lore raw

Re: [PATCH v3 1/3] arm64: Add BBM Level 2 cpu feature

Quoted 27 lines · Ryan Roberts
Quoted 16 lines · Marc Zyngier
Quoted 14 lines · Mikołaj Lenczewski
arch/arm64/kernel/pi/idreg-override.c +1 -0
index c6b185b885f7..9728faa10390 100644
@@ -209,6 +209,7 @@ static const struct ftr_set_desc sw_features __prel64_initconst = {
 		FIELD("nokaslr", ARM64_SW_FEATURE_OVERRIDE_NOKASLR, NULL),
 		FIELD("hvhe", ARM64_SW_FEATURE_OVERRIDE_HVHE, hvhe_filter),
 		FIELD("rodataoff", ARM64_SW_FEATURE_OVERRIDE_RODATA_OFF, NULL),
+		FIELD("nobbml2", ARM64_SW_FEATURE_OVERRIDE_NOBBML2, NULL),
 		{}
 	},
 };
@@ -246,6 +247,7 @@ static const struct {
Quoted 8 lines

arch/arm64/kernel/pi/idreg-override.c static const struct {

Quoted 4 lines
arch/arm64/kernel/pi/idreg-override.c +1 -0
 	{ "rodata=off",			"arm64_sw.rodataoff=1" },
 	{ "arm64.nolva",		"id_aa64mmfr2.varange=0" },
 	{ "arm64.no32bit_el0",		"id_aa64pfr0.el0=1" },
+	{ "arm64.nobbml2",		"arm64_sw.nobbml2=1" },

Why is that a SW feature? This looks very much like a HW feature to me, and you should instead mask out ID_AA64MMFR2_EL1.BBM, and be done with it. Something like:

Quoted 8 lines

I think this implies that we would expect the BBM field to be advertising BBML2 support normally and we would check for that as part of the cpufeature detection. That's how Miko was doing it in v2, but Yang pointed out that AmpereOne, which supports BBML2+NOABORT semantics, doesn't actually advertise BBML2 in its MMFR2. So we don't want to check that field, and instead rely solely on the MIDR allow-list + a command line override. It was me that suggested putting that in the SW feature register, and I think that still sounds like the right solution for this situation?

I think this is mixing two different things:

- preventing BBM-L2 from being visible to the kernel: this is what my suggestion is doing by nuking an architectural feature in the relevant register

- random HW not correctly advertising what they are doing: this is an erratum workaround

I'd rather we don't conflate the two things, and make them very explicitly distinct.

Thanks,

	M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
#13 lore raw

Re: [PATCH v3 1/3] arm64: Add BBM Level 2 cpu feature

Quoted 44 lines · Marc Zyngier
Quoted 27 lines · Ryan Roberts
Quoted 16 lines · Marc Zyngier
Quoted 14 lines · Mikołaj Lenczewski
arch/arm64/kernel/pi/idreg-override.c +1 -0
index c6b185b885f7..9728faa10390 100644
@@ -209,6 +209,7 @@ static const struct ftr_set_desc sw_features __prel64_initconst = {
 		FIELD("nokaslr", ARM64_SW_FEATURE_OVERRIDE_NOKASLR, NULL),
 		FIELD("hvhe", ARM64_SW_FEATURE_OVERRIDE_HVHE, hvhe_filter),
 		FIELD("rodataoff", ARM64_SW_FEATURE_OVERRIDE_RODATA_OFF, NULL),
+		FIELD("nobbml2", ARM64_SW_FEATURE_OVERRIDE_NOBBML2, NULL),
 		{}
 	},
 };
@@ -246,6 +247,7 @@ static const struct {
Quoted 8 lines

arch/arm64/kernel/pi/idreg-override.c static const struct {

Quoted 4 lines
arch/arm64/kernel/pi/idreg-override.c +1 -0
 	{ "rodata=off",			"arm64_sw.rodataoff=1" },
 	{ "arm64.nolva",		"id_aa64mmfr2.varange=0" },
 	{ "arm64.no32bit_el0",		"id_aa64pfr0.el0=1" },
+	{ "arm64.nobbml2",		"arm64_sw.nobbml2=1" },

Why is that a SW feature? This looks very much like a HW feature to me, and you should instead mask out ID_AA64MMFR2_EL1.BBM, and be done with it. Something like:

Quoted 8 lines

I think this implies that we would expect the BBM field to be advertising BBML2 support normally and we would check for that as part of the cpufeature detection. That's how Miko was doing it in v2, but Yang pointed out that AmpereOne, which supports BBML2+NOABORT semantics, doesn't actually advertise BBML2 in its MMFR2. So we don't want to check that field, and instead rely solely on the MIDR allow-list + a command line override. It was me that suggested putting that in the SW feature register, and I think that still sounds like the right solution for this situation?

I think this is mixing two different things:

- preventing BBM-L2 from being visible to the kernel: this is what my suggestion is doing by nuking an architectural feature in the relevant register

Quoted 5 lines

- random HW not correctly advertising what they are doing: this is an erratum workaround

I'd rather we don't conflate the two things, and make them very explicitly distinct.

It all sounds so obvious when you put it like that! :)

I'm guessing there is a layer where the workaround can be applied to the sanitised feature registers on a per-cpu basis and that won't affect this global override which will remain as an overlay on top? If so then that sounds perfect (you can probably tell I find the whole feature management framework rather inpeneterable). That workaround would be added as part of Yang's series anyway.

So sounds like we are back to testing MMFR2.BBM in the matches function, with the addition of Maz's proposal above. Sorry for sending you round the houses, Miko.

Thanks,
Ryan

Quoted 5 lines

Thanks,

	M.
#14 lore raw

Re: [PATCH v3 1/3] arm64: Add BBM Level 2 cpu feature

Quoted 52 lines · Ryan Roberts
Quoted 44 lines · Marc Zyngier
Quoted 27 lines · Ryan Roberts
Quoted 16 lines · Marc Zyngier
Quoted 14 lines · Mikołaj Lenczewski
arch/arm64/kernel/pi/idreg-override.c +1 -0
index c6b185b885f7..9728faa10390 100644
@@ -209,6 +209,7 @@ static const struct ftr_set_desc sw_features __prel64_initconst = {
 		FIELD("nokaslr", ARM64_SW_FEATURE_OVERRIDE_NOKASLR, NULL),
 		FIELD("hvhe", ARM64_SW_FEATURE_OVERRIDE_HVHE, hvhe_filter),
 		FIELD("rodataoff", ARM64_SW_FEATURE_OVERRIDE_RODATA_OFF, NULL),
+		FIELD("nobbml2", ARM64_SW_FEATURE_OVERRIDE_NOBBML2, NULL),
 		{}
 	},
 };
@@ -246,6 +247,7 @@ static const struct {
Quoted 8 lines

arch/arm64/kernel/pi/idreg-override.c static const struct {

Quoted 4 lines
arch/arm64/kernel/pi/idreg-override.c +1 -0
 	{ "rodata=off",			"arm64_sw.rodataoff=1" },
 	{ "arm64.nolva",		"id_aa64mmfr2.varange=0" },
 	{ "arm64.no32bit_el0",		"id_aa64pfr0.el0=1" },
+	{ "arm64.nobbml2",		"arm64_sw.nobbml2=1" },

Why is that a SW feature? This looks very much like a HW feature to me, and you should instead mask out ID_AA64MMFR2_EL1.BBM, and be done with it. Something like:

Quoted 8 lines

I think this implies that we would expect the BBM field to be advertising BBML2 support normally and we would check for that as part of the cpufeature detection. That's how Miko was doing it in v2, but Yang pointed out that AmpereOne, which supports BBML2+NOABORT semantics, doesn't actually advertise BBML2 in its MMFR2. So we don't want to check that field, and instead rely solely on the MIDR allow-list + a command line override. It was me that suggested putting that in the SW feature register, and I think that still sounds like the right solution for this situation?

I think this is mixing two different things:

- preventing BBM-L2 from being visible to the kernel: this is what my suggestion is doing by nuking an architectural feature in the relevant register

Quoted 5 lines

- random HW not correctly advertising what they are doing: this is an erratum workaround

I'd rather we don't conflate the two things, and make them very explicitly distinct.

Quoted 7 lines

It all sounds so obvious when you put it like that! :)

I'm guessing there is a layer where the workaround can be applied to the sanitised feature registers on a per-cpu basis and that won't affect this global override which will remain as an overlay on top? If so then that sounds perfect (you can probably tell I find the whole feature management framework rather inpeneterable).

You and I, brother... The only person who actually understands what's in that file is Suzuki.

Quoted 1 line

That workaround would be added as part of Yang's series anyway.

Yup, that's what I'd expect. Ideally tied to an erratum number so that we have an actual promise from the vendor that their implementation is actually BBM-L2 compliant despite the idreg breakage.

Thanks,

	M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
#15 lore raw

Re: [PATCH v3 1/3] arm64: Add BBM Level 2 cpu feature

In reply to Ryan Roberts
Quoted 51 lines · Ryan Roberts
Quoted 44 lines · Marc Zyngier
Quoted 27 lines · Ryan Roberts
Quoted 16 lines · Marc Zyngier
Quoted 14 lines · Mikołaj Lenczewski
arch/arm64/kernel/pi/idreg-override.c +1 -0
index c6b185b885f7..9728faa10390 100644
@@ -209,6 +209,7 @@ static const struct ftr_set_desc sw_features __prel64_initconst = {
  		FIELD("nokaslr", ARM64_SW_FEATURE_OVERRIDE_NOKASLR, NULL),
  		FIELD("hvhe", ARM64_SW_FEATURE_OVERRIDE_HVHE, hvhe_filter),
  		FIELD("rodataoff", ARM64_SW_FEATURE_OVERRIDE_RODATA_OFF, NULL),
+		FIELD("nobbml2", ARM64_SW_FEATURE_OVERRIDE_NOBBML2, NULL),
  		{}
  	},
  };
@@ -246,6 +247,7 @@ static const struct {
Quoted 8 lines

arch/arm64/kernel/pi/idreg-override.c static const struct { · line 250

Quoted 4 lines
arch/arm64/kernel/pi/idreg-override.c +1 -0
  	{ "rodata=off",			"arm64_sw.rodataoff=1" },
  	{ "arm64.nolva",		"id_aa64mmfr2.varange=0" },
  	{ "arm64.no32bit_el0",		"id_aa64pfr0.el0=1" },
+	{ "arm64.nobbml2",		"arm64_sw.nobbml2=1" },

Why is that a SW feature? This looks very much like a HW feature to me, and you should instead mask out ID_AA64MMFR2_EL1.BBM, and be done with it. Something like:

Quoted 8 lines

I think this implies that we would expect the BBM field to be advertising BBML2 support normally and we would check for that as part of the cpufeature detection. That's how Miko was doing it in v2, but Yang pointed out that AmpereOne, which supports BBML2+NOABORT semantics, doesn't actually advertise BBML2 in its MMFR2. So we don't want to check that field, and instead rely solely on the MIDR allow-list + a command line override. It was me that suggested putting that in the SW feature register, and I think that still sounds like the right solution for this situation?

I think this is mixing two different things:

- preventing BBM-L2 from being visible to the kernel: this is what my suggestion is doing by nuking an architectural feature in the relevant register

Quoted 5 lines

- random HW not correctly advertising what they are doing: this is an erratum workaround

I'd rather we don't conflate the two things, and make them very explicitly distinct.

Quoted 7 lines

It all sounds so obvious when you put it like that! :)

I'm guessing there is a layer where the workaround can be applied to the sanitised feature registers on a per-cpu basis and that won't affect this global override which will remain as an overlay on top? If so then that sounds perfect (you can probably tell I find the whole feature management framework rather inpeneterable). That workaround would be added as part of Yang's series anyway.

Unfortunately, there is no easy way to fix this via the normal erratum workaround "capability". The sanitised feature registers are handled separately (initialised via init_cpu_features() for boot CPU and sanitised eachtime via update_cpu_features).

Also we do not "enable" any capability (i.e. calling cpu_enable()) until the very end, after the CPUs are all brought up (except for boot CPUs).

But it may be possible to "fix up" the BBML2 feature in cpuinfo_store_*cpu(), without using the "enable" call back.

Something like:

arch/arm64/kernel/cpuinfo.c +7 -0
index 285d7d538342..8c23adbe29f8 100644
@@ -479,7 +479,11 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
        info->reg_id_aa64mmfr0 = read_cpuid(ID_AA64MMFR0_EL1);
        info->reg_id_aa64mmfr1 = read_cpuid(ID_AA64MMFR1_EL1);
        info->reg_id_aa64mmfr2 = read_cpuid(ID_AA64MMFR2_EL1);
 
+	/*
+	 * The CPU cap is not detected system wide, but we are able to
+	 * check if this CPU is affected by the Erratum.
+	 */
+       if (this_cpu_has_cap(AMPERE_ONE_ERRATUM_BBML2))
+               // Fixup  info->reg_id_aa64_mmfr2 with BBML2.
+
        info->reg_id_aa64mmfr3 = read_cpuid(ID_AA64MMFR3_EL1);
        info->reg_id_aa64mmfr4 = read_cpuid(ID_AA64MMFR4_EL1);
        info->reg_id_aa64pfr0 = read_cpuid(ID_AA64PFR0_EL1);
        info->reg_id_aa64pfr1 = read_cpuid(ID_AA64PFR1_EL1);

Suzuki

Quoted 13 lines

So sounds like we are back to testing MMFR2.BBM in the matches function, with the addition of Maz's proposal above. Sorry for sending you round the houses, Miko.

Thanks,
Ryan

Quoted 5 lines

Thanks,

	M.
#16 lore raw

Re: [PATCH v3 1/3] arm64: Add BBM Level 2 cpu feature

Quoted 92 lines · Suzuki K Poulose
Quoted 54 lines · Ryan Roberts
Quoted 47 lines · Marc Zyngier
Quoted 29 lines · Ryan Roberts
Quoted 18 lines · Marc Zyngier
Quoted 16 lines · Mikołaj Lenczewski
arch/arm64/kernel/pi/ renamed from arch/arm64/kernel/pi/idreg-override.c +0 -0

idreg-override.c
index c6b185b885f7..9728faa10390 100644

arch/arm64/kernel/pi/idreg-override.c +1 -0
@@ -209,6 +209,7 @@ static const struct ftr_set_desc sw_features
 __prel64_initconst = {
           FIELD("nokaslr", ARM64_SW_FEATURE_OVERRIDE_NOKASLR, NULL),
           FIELD("hvhe", ARM64_SW_FEATURE_OVERRIDE_HVHE, hvhe_filter),
           FIELD("rodataoff", ARM64_SW_FEATURE_OVERRIDE_RODATA_OFF, NULL),
+        FIELD("nobbml2", ARM64_SW_FEATURE_OVERRIDE_NOBBML2, NULL),
           {}
       },

  };

arch/arm64/kernel/pi/idreg-override.c +0 -0
@@ -246,6 +247,7 @@ static const struct {
Quoted 8 lines

arch/arm64/kernel/pi/idreg-override.c static const struct { · line 250

Quoted 4 lines
arch/arm64/kernel/pi/idreg-override.c +1 -0
       { "rodata=off",            "arm64_sw.rodataoff=1" },
       { "arm64.nolva",        "id_aa64mmfr2.varange=0" },
       { "arm64.no32bit_el0",        "id_aa64pfr0.el0=1" },
+    { "arm64.nobbml2",        "arm64_sw.nobbml2=1" },

Why is that a SW feature? This looks very much like a HW feature to me, and you should instead mask out ID_AA64MMFR2_EL1.BBM, and be done with it. Something like:

Quoted 9 lines

I think this implies that we would expect the BBM field to be advertising BBML2 support normally and we would check for that as part of the cpufeature detection. That's how Miko was doing it in v2, but Yang pointed out that AmpereOne, which supports BBML2+NOABORT semantics, doesn't actually advertise BBML2 in its MMFR2. So we don't want to check that field, and instead rely solely on the MIDR allow-list + a command line override. It was me that suggested putting that in the SW feature register, and I think that still sounds
like the right solution for this situation?

I think this is mixing two different things:

- preventing BBM-L2 from being visible to the kernel: this is what my suggestion is doing by nuking an architectural feature in the relevant register

Quoted 5 lines

- random HW not correctly advertising what they are doing: this is an erratum workaround

I'd rather we don't conflate the two things, and make them very explicitly distinct.

Quoted 7 lines

It all sounds so obvious when you put it like that! :)

I'm guessing there is a layer where the workaround can be applied to the sanitised feature registers on a per-cpu basis and that won't affect this global override which will remain as an overlay on top? If so then that sounds perfect (you can probably tell I find the whole feature management framework rather inpeneterable). That workaround would be added as part of Yang's series anyway.

Unfortunately, there is no easy way to fix this via the normal erratum workaround "capability". The sanitised feature registers are handled separately (initialised via init_cpu_features() for boot CPU and sanitised eachtime via update_cpu_features).

Also we do not "enable" any capability (i.e. calling cpu_enable()) until the very end, after the CPUs are all brought up (except for boot CPUs).

But it may be possible to "fix up" the BBML2 feature in cpuinfo_store_*cpu(), without using the "enable" call back.

Something like:

arch/arm64/kernel/cpuinfo.c +7 -0
index 285d7d538342..8c23adbe29f8 100644
@@ -479,7 +479,11 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
         info->reg_id_aa64mmfr0 = read_cpuid(ID_AA64MMFR0_EL1);
         info->reg_id_aa64mmfr1 = read_cpuid(ID_AA64MMFR1_EL1);
         info->reg_id_aa64mmfr2 = read_cpuid(ID_AA64MMFR2_EL1);
 
+    /*
+     * The CPU cap is not detected system wide, but we are able to
+     * check if this CPU is affected by the Erratum.
+     */
+       if (this_cpu_has_cap(AMPERE_ONE_ERRATUM_BBML2))
+               // Fixup  info->reg_id_aa64_mmfr2 with BBML2.
+
Quoted 5 lines

        info->reg_id_aa64mmfr3 = read_cpuid(ID_AA64MMFR3_EL1); info->reg_id_aa64mmfr4 = read_cpuid(ID_AA64MMFR4_EL1); info->reg_id_aa64pfr0 = read_cpuid(ID_AA64PFR0_EL1); info->reg_id_aa64pfr1 = read_cpuid(ID_AA64PFR1_EL1);

This is the type of thing I was imagining, thanks!

Quoted 17 lines

Suzuki

Quoted 14 lines

So sounds like we are back to testing MMFR2.BBM in the matches function, with the addition of Maz's proposal above. Sorry for sending you round the houses, Miko.

Thanks,
Ryan

Quoted 5 lines

Thanks,

    M.

#17 lore raw

PATCH v3 2/3 iommu/arm: Add BBM Level 2 smmu feature

In reply to Mikołaj Lenczewski

For supporting BBM Level 2 for userspace mappings, we want to ensure that the smmu also supports its own version of BBM Level 2. Luckily, the smmu spec (IHI 0070G 3.21.1.3) is stricter than the aarch64 spec (DDI 0487K.a D8.16.2), so already guarantees that no aborts are raised when BBM level 2 is claimed.

Add the feature and testing for it under arm_smmu_sva_supported().

---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 3 +++
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c     | 3 +++
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h     | 4 ++++
 3 files changed, 10 insertions(+)
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c +3 -0
index 9ba596430e7c..6ba182572788 100644
@@ -222,6 +222,9 @@ bool arm_smmu_sva_supported(struct arm_smmu_device *smmu)
 		feat_mask |= ARM_SMMU_FEAT_VAX;
 	}
 
+	if (system_supports_bbml2_noabort())
+		feat_mask |= ARM_SMMU_FEAT_BBML2;
+
 	if ((smmu->features & feat_mask) != feat_mask)
 		return false;
 
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c +3 -0
index 358072b4e293..dcee0bdec924 100644
@@ -4406,6 +4406,9 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
 	if (FIELD_GET(IDR3_RIL, reg))
 		smmu->features |= ARM_SMMU_FEAT_RANGE_INV;
 
+	if (FIELD_GET(IDR3_BBML, reg) == IDR3_BBML2)
+		smmu->features |= ARM_SMMU_FEAT_BBML2;
+
 	/* IDR5 */
 	reg = readl_relaxed(smmu->base + ARM_SMMU_IDR5);
 
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h +4 -0
index bd9d7c85576a..85eaf3ab88c2 100644
@@ -60,6 +60,9 @@ struct arm_smmu_device;
 #define ARM_SMMU_IDR3			0xc
 #define IDR3_FWB			(1 << 8)
 #define IDR3_RIL			(1 << 10)
+#define IDR3_BBML			GENMASK(12, 11)
+#define IDR3_BBML1			(1 << 11)
+#define IDR3_BBML2			(2 << 11)
 
 #define ARM_SMMU_IDR5			0x14
 #define IDR5_STALL_MAX			GENMASK(31, 16)
@@ -754,6 +757,7 @@ struct arm_smmu_device {
 #define ARM_SMMU_FEAT_HA		(1 << 21)
 #define ARM_SMMU_FEAT_HD		(1 << 22)
 #define ARM_SMMU_FEAT_S2FWB		(1 << 23)
+#define ARM_SMMU_FEAT_BBML2		(1 << 24)
 	u32				features;
 
 #define ARM_SMMU_OPT_SKIP_PREFETCH	(1 << 0)
Signature · 1 line
2.48.1
reviewer Reviewed-by on v3 2/3
#18 lore raw

Re: [PATCH v3 2/3] iommu/arm: Add BBM Level 2 smmu feature

Quoted 7 lines · Mikołaj Lenczewski

For supporting BBM Level 2 for userspace mappings, we want to ensure that the smmu also supports its own version of BBM Level 2. Luckily, the smmu spec (IHI 0070G 3.21.1.3) is stricter than the aarch64 spec (DDI 0487K.a D8.16.2), so already guarantees that no aborts are raised when BBM level 2 is claimed.

Add the feature and testing for it under arm_smmu_sva_supported().

Quoted 57 lines
---
  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 3 +++
  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c     | 3 +++
  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h     | 4 ++++
  3 files changed, 10 insertions(+)
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c +3 -0
index 9ba596430e7c..6ba182572788 100644
@@ -222,6 +222,9 @@ bool arm_smmu_sva_supported(struct arm_smmu_device *smmu)
  		feat_mask |= ARM_SMMU_FEAT_VAX;
  	}
 
+	if (system_supports_bbml2_noabort())
+		feat_mask |= ARM_SMMU_FEAT_BBML2;
+
  	if ((smmu->features & feat_mask) != feat_mask)
  		return false;
 
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c +3 -0
index 358072b4e293..dcee0bdec924 100644
@@ -4406,6 +4406,9 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
  	if (FIELD_GET(IDR3_RIL, reg))
  		smmu->features |= ARM_SMMU_FEAT_RANGE_INV;
 
+	if (FIELD_GET(IDR3_BBML, reg) == IDR3_BBML2)
+		smmu->features |= ARM_SMMU_FEAT_BBML2;
+
  	/* IDR5 */
  	reg = readl_relaxed(smmu->base + ARM_SMMU_IDR5);
 
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h +4 -0
index bd9d7c85576a..85eaf3ab88c2 100644
@@ -60,6 +60,9 @@ struct arm_smmu_device;
  #define ARM_SMMU_IDR3			0xc
  #define IDR3_FWB			(1 << 8)
  #define IDR3_RIL			(1 << 10)
+#define IDR3_BBML			GENMASK(12, 11)
+#define IDR3_BBML1			(1 << 11)
+#define IDR3_BBML2			(2 << 11)
 
  #define ARM_SMMU_IDR5			0x14
  #define IDR5_STALL_MAX			GENMASK(31, 16)
@@ -754,6 +757,7 @@ struct arm_smmu_device {
  #define ARM_SMMU_FEAT_HA		(1 << 21)
  #define ARM_SMMU_FEAT_HD		(1 << 22)
  #define ARM_SMMU_FEAT_S2FWB		(1 << 23)
+#define ARM_SMMU_FEAT_BBML2		(1 << 24)
  	u32				features;
 
  #define ARM_SMMU_OPT_SKIP_PREFETCH	(1 << 0)
Reviewed-by on v3 2/3
#19 lore raw

Re: [PATCH v3 2/3] iommu/arm: Add BBM Level 2 smmu feature

In reply to Mikołaj Lenczewski
Quoted 9 lines · Mikołaj Lenczewski

For supporting BBM Level 2 for userspace mappings, we want to ensure that the smmu also supports its own version of BBM Level 2. Luckily, the smmu spec (IHI 0070G 3.21.1.3) is stricter than the aarch64 spec (DDI 0487K.a D8.16.2), so already guarantees that no aborts are raised when BBM level 2 is claimed.

Add the feature and testing for it under arm_smmu_sva_supported().

Quoted 56 lines
---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 3 +++
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c     | 3 +++
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h     | 4 ++++
 3 files changed, 10 insertions(+)
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c +3 -0
index 9ba596430e7c..6ba182572788 100644
@@ -222,6 +222,9 @@ bool arm_smmu_sva_supported(struct arm_smmu_device *smmu)
 		feat_mask |= ARM_SMMU_FEAT_VAX;
 	}
 
+	if (system_supports_bbml2_noabort())
+		feat_mask |= ARM_SMMU_FEAT_BBML2;
+
 	if ((smmu->features & feat_mask) != feat_mask)
 		return false;
 
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c +3 -0
index 358072b4e293..dcee0bdec924 100644
@@ -4406,6 +4406,9 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
 	if (FIELD_GET(IDR3_RIL, reg))
 		smmu->features |= ARM_SMMU_FEAT_RANGE_INV;
 
+	if (FIELD_GET(IDR3_BBML, reg) == IDR3_BBML2)
+		smmu->features |= ARM_SMMU_FEAT_BBML2;
+
 	/* IDR5 */
 	reg = readl_relaxed(smmu->base + ARM_SMMU_IDR5);
 
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h +4 -0
index bd9d7c85576a..85eaf3ab88c2 100644
@@ -60,6 +60,9 @@ struct arm_smmu_device;
 #define ARM_SMMU_IDR3			0xc
 #define IDR3_FWB			(1 << 8)
 #define IDR3_RIL			(1 << 10)
+#define IDR3_BBML			GENMASK(12, 11)
+#define IDR3_BBML1			(1 << 11)
+#define IDR3_BBML2			(2 << 11)
 
 #define ARM_SMMU_IDR5			0x14
 #define IDR5_STALL_MAX			GENMASK(31, 16)
@@ -754,6 +757,7 @@ struct arm_smmu_device {
 #define ARM_SMMU_FEAT_HA		(1 << 21)
 #define ARM_SMMU_FEAT_HD		(1 << 22)
 #define ARM_SMMU_FEAT_S2FWB		(1 << 23)
+#define ARM_SMMU_FEAT_BBML2		(1 << 24)
 	u32				features;
 
 #define ARM_SMMU_OPT_SKIP_PREFETCH	(1 << 0)
#20 lore raw

PATCH v3 3/3 arm64/mm: Elide tlbi in contpte_convert() under BBML2

In reply to Mikołaj Lenczewski

When converting a region via contpte_convert() to use mTHP, we have two different goals. We have to mark each entry as contiguous, and we would like to smear the dirty and young (access) bits across all entries in the contiguous block. Currently, we do this by first accumulating the dirty and young bits in the block, using an atomic __ptep_get_and_clear() and the relevant pte_{dirty,young}() calls, performing a tlbi, and finally smearing the correct bits across the block using __set_ptes().

This approach works fine for BBM level 0, but with support for BBM level 2 we are allowed to reorder the tlbi to after setting the pagetable entries. This reordering reduces the likelyhood of a concurrent page walk finding an invalid (not present) PTE. This reduces the likelyhood of a fault in other threads, and improves performance marginally (more so when there are more threads).

If we support bbml2 without conflict aborts however, we can avoid the final flush altogether and have hardware manage the tlb entries for us. Avoiding flushes is a win.

---
 arch/arm64/mm/contpte.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm64/mm/contpte.c +2 -1
index 55107d27d3f8..77ed03b30b72 100644
@@ -68,7 +68,8 @@ static void contpte_convert(struct mm_struct *mm, unsigned long addr,
 			pte = pte_mkyoung(pte);
 	}
 
-	__flush_tlb_range(&vma, start_addr, addr, PAGE_SIZE, true, 3);
+	if (!system_supports_bbml2_noabort())
+		__flush_tlb_range(&vma, start_addr, addr, PAGE_SIZE, true, 3);
 
 	__set_ptes(mm, start_addr, start_ptep, pte, CONT_PTES);
 }
Signature · 1 line
2.48.1
Reviewed-by on v3 3/3
#21 lore raw

Re: [PATCH v3 3/3] arm64/mm: Elide tlbi in contpte_convert() under BBML2

Quoted 9 lines · Mikołaj Lenczewski

When converting a region via contpte_convert() to use mTHP, we have two different goals. We have to mark each entry as contiguous, and we would like to smear the dirty and young (access) bits across all entries in the contiguous block. Currently, we do this by first accumulating the dirty and young bits in the block, using an atomic __ptep_get_and_clear() and the relevant pte_{dirty,young}() calls, performing a tlbi, and finally smearing the correct bits across the block using __set_ptes().

Quoted 6 lines

This approach works fine for BBM level 0, but with support for BBM level 2 we are allowed to reorder the tlbi to after setting the pagetable entries. This reordering reduces the likelyhood of a concurrent page walk finding an invalid (not present) PTE. This reduces the likelyhood of a fault in other threads, and improves performance marginally (more so when there are more threads).

Just to add some extra clarity for the sake of the review; we expect that the cost of the tlbi(s) is much greater than the cost of clearing and re-setting the ptes. So by moving the tlbi(s) outside of the window where the ptes are invalid (as bbml2 permits us to do) we greatly reduce the duration where the ptes are invalid and therefore greatly reduce the chances of another thread taking a fault on the temporarily invalid address...

Quoted 4 lines

If we support bbml2 without conflict aborts however, we can avoid the final flush altogether and have hardware manage the tlb entries for us. Avoiding flushes is a win.

...But because we are only allow-listing bbml2 implementations that don't raise a conflict abort and instead automatically invalidate the conflicting entries in HW, we can avoid that tlbi altogether.

Quoted 2 lines
Quoted 18 lines
---
 arch/arm64/mm/contpte.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm64/mm/contpte.c +2 -1
index 55107d27d3f8..77ed03b30b72 100644
@@ -68,7 +68,8 @@ static void contpte_convert(struct mm_struct *mm, unsigned long addr,
 			pte = pte_mkyoung(pte);
 	}
 
-	__flush_tlb_range(&vma, start_addr, addr, PAGE_SIZE, true, 3);
+	if (!system_supports_bbml2_noabort())
+		__flush_tlb_range(&vma, start_addr, addr, PAGE_SIZE, true, 3);
 
 	__set_ptes(mm, start_addr, start_ptep, pte, CONT_PTES);
 }
#22 lore raw
In reply to Mikołaj Lenczewski

Hi Miko,

Quoted 20 lines · Mikołaj Lenczewski

Hi All,

This patch series adds adding initial support for eliding break-before-make requirements on systems that support BBML2 and additionally guarantee to never raise a conflict abort.

This support elides a TLB invalidation in contpte_convert(). This leads to a 12% improvement when executing a microbenchmark designed to force the pathological path where contpte_convert() gets called. This represents an 80% reduction in the cost of calling contpte_convert().

This series is based on v6.14-rc4 (d082ecbc71e9).

Patch 1 implements an allow-list of cpus that support BBML2, but with the additional constraint of never causing TLB conflict aborts. We settled on this constraint because we will use the feature for kernel mappings in the future, for which we cannot handle conflict aborts safely.

Quoted 5 lines

Yang Shi has a series at [1] that aims to use BBML2 to enable splitting the linear map at runtime. This series partially overlaps with it to add the cpu feature. We believe this series is fully compatible with Yang's requirements and could go first.

Nothing about the patch functionality, but :

Minor nit: Generally it is a good idea to add "What changed" from the previous posting. That gives the reviewers an idea of what to look for in the new version. Something like:

Changes since V2:
{Adding a link to the posting is an added bonus, as we can look up the
discussions easily}
- blah blah
- ..

Cheers
Suzuki

Quoted 21 lines

[1]:

   https://lore.kernel.org/linux-arm-kernel/[email protected]/

Mikołaj Lenczewski (3):
arm64: Add BBM Level 2 cpu feature iommu/arm: Add BBM Level 2 smmu feature arm64/mm: Elide tlbi in contpte_convert() under BBML2

  .../admin-guide/kernel-parameters.txt         |  3 +
  arch/arm64/Kconfig                            | 11 +++
  arch/arm64/include/asm/cpucaps.h              |  2 +
  arch/arm64/include/asm/cpufeature.h           |  6 ++
  arch/arm64/kernel/cpufeature.c                | 76 +++++++++++++++++++
  arch/arm64/kernel/pi/idreg-override.c         |  2 +
  arch/arm64/mm/contpte.c                       |  3 +-
  arch/arm64/tools/cpucaps                      |  1 +
  .../iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c   |  3 +
  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c   |  3 +
  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h   |  4 +
  11 files changed, 113 insertions(+), 1 deletion(-)
#23 lore raw
Quoted 18 lines · Suzuki K Poulose

Hi Miko,

Quoted 2 lines · Mikołaj Lenczewski

Hi All,

Nothing about the patch functionality, but :

Minor nit: Generally it is a good idea to add "What changed" from the previous posting. That gives the reviewers an idea of what to look for in the new version. Something like:

Changes since V2:
{Adding a link to the posting is an added bonus, as we can look up the
discussions easily}
- blah blah
- ..

Quoted 2 lines

Cheers
Suzuki

Ah, yes. My apologies. Will make sure to include such a changelog with links to previous versions in future. I do not know why I did not include it here, other than it not crossing my mind...

Signature · 2 lines
Kind regards,
Mikołaj Lenczewski