Error 'netif_napi_add_weight() called with weight 256'
Subsystems (3)
Hi,
I noticed today with 6.5-rc4 and also on 6.1.42 that I'm getting an error from an r8152 based dongle (Framework ethernet expansion card).
netif_napi_add_weight() called with weight 256
It seems that this message is likely introduced by 8ded532cd1cbe ("r8152: switch to netif_napi_add_weight()")
which if the card has support_2500full set will program the value to 256:
netif_napi_add_weight(netdev, &tp->napi, r8152_poll, tp->support_2500full ? 256 : 64);
It's err level from82dc3c63c692b ("net: introduce NAPI_POLL_WEIGHT")
Why is this considered an error but the driver uses the bigger value? Should it be downgraded to a warning?
Thanks,
Jakub Kicinski
maintainerQuoted 12 lines · Mario
Hi,
I noticed today with 6.5-rc4 and also on 6.1.42 that I'm getting an error from an r8152 based dongle (Framework ethernet expansion card).
netif_napi_add_weight()called with weight 256It seems that this message is likely introduced by
8ded532cd1cbe("r8152: switch tonetif_napi_add_weight()")which if the card has
support_2500fullset will program the value to 256:
Quoted 8 lines
netif_napi_add_weight(netdev, &tp->napi, r8152_poll, tp->support_2500full ? 256 : 64);It's err level from
82dc3c63c692b("net: introduceNAPI_POLL_WEIGHT")Why is this considered an error but the driver uses the bigger value? Should it be downgraded to a warning?
Could you double check that the warning wasn't there before? The code added by commit 195aae321c82 ("r8152: support new chips") in 5.13 looks very much equivalent.
The custom weight is probably due to a misunderstanding. We have 200G adapters using the standard weight of 64, IDK why 2.5G adapter would need anything special.
Quoted 19 lines · Jakub Kicinski
Quoted 18 lines · Mario
Hi,
I noticed today with 6.5-rc4 and also on 6.1.42 that I'm getting an error from an r8152 based dongle (Framework ethernet expansion card).
netif_napi_add_weight()called with weight 256It seems that this message is likely introduced by
8ded532cd1cbe("r8152: switch tonetif_napi_add_weight()")which if the card has
support_2500fullset will program the value to 256:netif_napi_add_weight(netdev, &tp->napi, r8152_poll, tp->support_2500full ? 256 : 64);It's err level from
82dc3c63c692b("net: introduceNAPI_POLL_WEIGHT")
Quoted 6 lines
Quoted 2 lines
Why is this considered an error but the driver uses the bigger value? Should it be downgraded to a warning?
Could you double check that the warning wasn't there before? The code added by commit
195aae321c82("r8152: support new chips") in 5.13 looks very much equivalent.
Yeah; looking through the history I agree it was probably was there from the beginning of being introduced.
6.1 is the earliest kernel that is usable with this laptop (for other reasons).
Quoted 3 lines
The custom weight is probably due to a misunderstanding. We have 200G adapters using the standard weight of 64, IDK why 2.5G adapter would need anything special.
Perhaps Hayes Wang can comment on this (as the author of 195aae321c82).
Quoted 30 lines · Mario
Quoted 19 lines · Jakub Kicinski
Quoted 18 lines · Mario
Hi,
I noticed today with 6.5-rc4 and also on 6.1.42 that I'm getting an error from an r8152 based dongle (Framework ethernet expansion card).
netif_napi_add_weight()called with weight 256It seems that this message is likely introduced by
8ded532cd1cbe("r8152: switch tonetif_napi_add_weight()")which if the card has
support_2500fullset will program the value to 256:netif_napi_add_weight(netdev, &tp->napi, r8152_poll, tp->support_2500full ? 256 : 64);It's err level from
82dc3c63c692b("net: introduceNAPI_POLL_WEIGHT")Quoted 6 lines
Quoted 2 lines
Why is this considered an error but the driver uses the bigger value? Should it be downgraded to a warning?
Could you double check that the warning wasn't there before? The code added by commit
195aae321c82("r8152: support new chips") in 5.13 looks very much equivalent.Yeah; looking through the history I agree it was probably was there from the beginning of being introduced.
Quoted 9 lines
6.1 is the earliest kernel that is usable with this laptop (for other reasons).
Quoted 3 lines
The custom weight is probably due to a misunderstanding. We have 200G adapters using the standard weight of 64, IDK why 2.5G adapter would need anything special.
Perhaps Hayes Wang can comment on this (as the author of
195aae321c82).
Large NAPI weights mean that one busy device (DOS attack) can starve the system. Really doubt that > 64 makes any visible difference in throughput.
Limonciello, Mario <[email protected]>
Quoted 1 line
Sent: Tuesday, August 1, 2023 2:24 AM
[...]
Quoted 6 lines
Quoted 4 lines
The custom weight is probably due to a misunderstanding. We have 200G adapters using the standard weight of 64, IDK why 2.5G adapter would need anything special.
Perhaps Hayes Wang can comment on this (as the author of
195aae321c82).
I test our devices on an Embedded system.
We find the throughput is low.
And it is caused by the weight.
Our NAPI function often uses the whole budget. Finally, we increase the weight, and the throughput is good.
Best Regards,
Hayes
Jakub Kicinski
maintainerQuoted 7 lines · On Mon, 7 Aug 2023 09:57:15 +0000 Hayes Wang wrote:
Quoted 1 line
Perhaps Hayes Wang can comment on this (as the author of
195aae321c82).I test our devices on an Embedded system.
We find the throughput is low.
And it is caused by the weight.
Our NAPI function often uses the whole budget. Finally, we increase the weight, and the throughput is good.
Could it possibly be related to handling of aggregation? Problem must lay somewhere in USB specifics, since as I said there are 100Gbps devices running fine with budget of 64.
Jakub Kicinski <[email protected]>
Quoted 1 line
Sent: Tuesday, August 8, 2023 12:37 AM
[...]
Quoted 9 lines
Quoted 5 lines
I test our devices on an Embedded system.
We find the throughput is low.
And it is caused by the weight.
Our NAPI function often uses the whole budget. Finally, we increase the weight, and the throughput is good.Could it possibly be related to handling of aggregation? Problem must lay somewhere in USB specifics, since as I said there are 100Gbps devices running fine with budget of 64.
I think it depends on the platform.
Most of the platforms don't have the same situation. Besides, I think the platform with 100Gbps device may have faster CPU than that one which I test.
What would happen, if I set the weight to 256 on the platform which runs well for the weight of 64?
Doesn't it only influence the slow platform?
Best Regards,
Hayes
Jakub Kicinski
maintainerQuoted 8 lines · On Wed, 9 Aug 2023 13:11:57 +0000 Hayes Wang wrote:
I think it depends on the platform.
Most of the platforms don't have the same situation. Besides, I think the platform with 100Gbps device may have faster CPU than that one which I test.What would happen, if I set the weight to 256 on the platform which runs well for the weight of 64?
Doesn't it only influence the slow platform?
High weight will cause higher latency for other softirq and RT processing, it's not a good idea. Even with weight/budget of 64 if there's no higher prio work to do the driver will be polled again immediately if it consumed the budget and has more packets.
Do you have some actual data on how the device performs with budget of 64 and 256? And maybe perf traces to show where the difference goes?
Jakub Kicinski <[email protected]>
Quoted 1 line
Sent: Thursday, August 10, 2023 2:38 AM
[...]
Quoted 4 lines
High weight will cause higher latency for other softirq and RT processing, it's not a good idea. Even with weight/budget of 64 if there's no higher prio work to do the driver will be polled again immediately if it consumed the budget and has more packets.
I mean that only the slow platform uses more than 64 budget,
even I set the weight to 256.
That is, for the fast platform, the actual used budget is always less than 64, even the weight is 256.
Quoted 2 lines
Do you have some actual data on how the device performs with budget of 64 and 256? And maybe perf traces to show where the difference goes?
I tested that slow embedded platform many years ago, so I don't remember the actual data.
I think the difference is more than 400Mbps.
Best Regards,
Hayes