usb driver for intellon int51x1 based PLC like devolo dlan duo
Subsystems (3)
PATCH 2/2 usb driver for intellon int51x1 based PLC like devolo dlan duo
usb driver for intellon int51x1 based PLC like devolo dlan duo with improvements suggested by the guys of the mailinglist:
- name and prefix with int51x1 (Florian Fainelli)
- use conversion functions cpu_to_le16 / le16_to_cpu (Oliver Neukum)
- use pskb_may_pull instead of skb->len (Ilpo Järvinen)
- better code in tx_fixup (Ilpo Järvinen)
- use gotos for error handling (Ilpo Järvinen)
- better description (Jon Smirl)
Signed-off-by Peter Holik <[email protected]>
--- drivers/net/usb/Kconfig | 8 ++ drivers/net/usb/Makefile | 1 + drivers/net/usb/int51x1.c | 253 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 262 insertions(+), 0 deletions(-) create mode 100644 drivers/net/usb/int51x1.c
drivers/net/usb/Kconfig +8 -0
@@ -345,4 +345,12 @@ config USB_HSO To compile this driver as a module, choose M here: the module will be called hso. +config USB_NET_INT51X1 + tristate "Intellon PLC based usb adapter" + depends on USB_USBNET + help + Choose this option if you're using a 14Mb USB-based PLC + (Powerline Communications) solution with an Intellon + INT51x1/INT5200 chip, like the "devolo dLan duo". + endmenu
drivers/net/usb/Makefile +1 -0
@@ -19,4 +19,5 @@ obj-$(CONFIG_USB_NET_CDC_SUBSET) += cdc_subset.o obj-$(CONFIG_USB_NET_ZAURUS) += zaurus.o obj-$(CONFIG_USB_NET_MCS7830) += mcs7830.o obj-$(CONFIG_USB_USBNET) += usbnet.o +obj-$(CONFIG_USB_NET_INT51X1) += int51x1.o
drivers/net/usb/int51x1.c new file +253 -0
253 lines not on this page · raw message
Signature · 1 line
1.6.2.1