Skip to contentSkip to conversation

mpc8379erdb: Convert to DM_MMC

PATCH New sinan at writeme.com 3 participants 7 messages Apr 3, 2020 – Feb 22, 2021 PowerPC

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mpc8379erdb: Convert to DM_MMC

From: Sinan Akman <[email protected]>

Cc mario.six at gdsys.cc
---
 arch/powerpc/dts/Makefile                 |   1 +
 arch/powerpc/dts/mpc8379erdb.dts          | 239 ++++++++++++++++++++++++++++++
 board/freescale/mpc837xerdb/mpc837xerdb.c |   9 +-
 configs/MPC837XERDB_defconfig             |   5 +-
 4 files changed, 252 insertions(+), 2 deletions(-)
 create mode 100644 arch/powerpc/dts/mpc8379erdb.dts
arch/powerpc/dts/Makefile +1 -0
index 3195351c9c..e3ec033096 100644
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0+
 
+dtb-$(CONFIG_TARGET_MPC837XERDB) += mpc8379erdb.dtb
 dtb-$(CONFIG_TARGET_MPC8548CDS) += mpc8548cds.dtb mpc8548cds_36b.dtb
 dtb-$(CONFIG_TARGET_P1020RDB_PC) += p1020rdb-pc.dtb p1020rdb-pc_36b.dtb
 dtb-$(CONFIG_TARGET_P1020RDB_PD) += p1020rdb-pd.dtb
arch/powerpc/dts/mpc8379erdb.dts new file +239 -0

239 lines not on this page · raw message

board/freescale/mpc837xerdb/mpc837xerdb.c +8 -1
index 45038acf32..9321952674 100644
@@ -136,8 +136,8 @@ int checkboard(void)
 
 int board_early_init_f(void)
 {
-#ifdef CONFIG_FSL_SERDES
 	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+#ifdef CONFIG_FSL_SERDES
 	u32 spridr = in_be32(&immr->sysconf.spridr);
 
 	/* we check only part num, and don't look for CPU revisions */
@@ -164,10 +164,16 @@ int board_early_init_f(void)
 		break;
 	}
 #endif /* CONFIG_FSL_SERDES */
+
+#ifdef CONFIG_FSL_ESDHC
+	clrsetbits_be32(&immr->sysconf.sicrl, SICRL_USB_B, SICRL_USB_B_SD);
+	clrsetbits_be32(&immr->sysconf.sicrh, SICRH_SPI, SICRH_SPI_SD);
+#endif
 	return 0;
 }
 
 #ifdef CONFIG_FSL_ESDHC
+#if !(CONFIG_IS_ENABLED(DM_MMC))
 int board_mmc_init(bd_t *bd)
 {
 	struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR;
@@ -186,6 +192,7 @@ int board_mmc_init(bd_t *bd)
 	return fsl_esdhc_mmc_init(bd);
 }
 #endif
+#endif
 
 /*
  * Miscellaneous late-boot configurations
configs/MPC837XERDB_defconfig +4 -1
index fd8335ee4e..8ef193a6e5 100644
@@ -160,7 +160,11 @@ CONFIG_CMD_PING=y
 CONFIG_CMD_DATE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="mpc8379erdb"
 CONFIG_ENV_ADDR=0xFE080000
+CONFIG_DM=y
+CONFIG_DM_MMC=y
 CONFIG_FSL_SATA=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD_NOR_FLASH=y
@@ -174,4 +178,3 @@ CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y

--
2.14.5

#1 lore raw

PATCH 1/1 mpc8379erdb: Convert to DM_MMC

HI,

Quoted 2 lines · sinan at writeme.com

From: Sinan Akman <[email protected]>

I'm not sure but its subject is strange.
It's not only the converting to DM_MMC. you're adding mpc8397.dtb device-tree. I think you don't add device-tree for only mmc.

It's better to separate patches. "Add devicetree...", " Convert to DM_MMC". It's just my opinion.

Best Regards,
Jaehoon Chung

Quoted 331 lines
Cc mario.six at gdsys.cc
---
 arch/powerpc/dts/Makefile                 |   1 +
 arch/powerpc/dts/mpc8379erdb.dts          | 239 ++++++++++++++++++++++++++++++
 board/freescale/mpc837xerdb/mpc837xerdb.c |   9 +-
 configs/MPC837XERDB_defconfig             |   5 +-
 4 files changed, 252 insertions(+), 2 deletions(-)
 create mode 100644 arch/powerpc/dts/mpc8379erdb.dts
arch/powerpc/dts/Makefile +1 -0
index 3195351c9c..e3ec033096 100644
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0+
 
+dtb-$(CONFIG_TARGET_MPC837XERDB) += mpc8379erdb.dtb
 dtb-$(CONFIG_TARGET_MPC8548CDS) += mpc8548cds.dtb mpc8548cds_36b.dtb
 dtb-$(CONFIG_TARGET_P1020RDB_PC) += p1020rdb-pc.dtb p1020rdb-pc_36b.dtb
 dtb-$(CONFIG_TARGET_P1020RDB_PD) += p1020rdb-pd.dtb
arch/powerpc/dts/mpc8379erdb.dts new file +239 -0
new file mode 100644
index 0000000000..33afaf9a94
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * MPC8379E RDB Device Tree Source
+ *
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,mpc8379erdb";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8379 at 0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;  // 256MB at 0
+	};
+
+	localbus at e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+	};
+
+	immr at e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt at 200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		gpio0: gpio at c00 {
+			#gpio-cells = <2>;
+			device_type = "gpio";
+			compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
+			reg = <0xc00 0x18>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		gpio2: gpio-controller at d00 {
+			#gpio-cells = <2>;
+			device_type = "gpio";
+			compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
+			reg = <0xd00 0x100>;
+			interrupts = <75 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		i2c at 3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		i2c at 3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi at 7000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		sdhc at 2e000 {
+			compatible = "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			bus-width = <0x4>;
+			clock-frequency = <0>;
+		};
+
+		serial0: serial at 4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial at 4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		ipic: interrupt-controller at 700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		pmc: power at b00 {
+			compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		usb at 23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			phy_type = "ulpi";
+			sleep = <&pmc 0x00c00000>;
+		};
+
+		enet0: ethernet at 24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar", "fsl,tsec";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = < &tbi0 >;
+			phy-handle = < &phy2 >;
+			fsl,magic-packet;
+
+			mdio at 520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy2: ethernet-phy at 2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x2>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy at 11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet at 25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar", "fsl,tsec";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi1>;
+			fsl,magic-packet;
+
+			mdio at 520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy at 11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+	};
+
+};
board/freescale/mpc837xerdb/mpc837xerdb.c +8 -1
index 45038acf32..9321952674 100644
@@ -136,8 +136,8 @@ int checkboard(void)
 
 int board_early_init_f(void)
 {
-#ifdef CONFIG_FSL_SERDES
 	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+#ifdef CONFIG_FSL_SERDES
 	u32 spridr = in_be32(&immr->sysconf.spridr);
 
 	/* we check only part num, and don't look for CPU revisions */
@@ -164,10 +164,16 @@ int board_early_init_f(void)
 		break;
 	}
 #endif /* CONFIG_FSL_SERDES */
+
+#ifdef CONFIG_FSL_ESDHC
+	clrsetbits_be32(&immr->sysconf.sicrl, SICRL_USB_B, SICRL_USB_B_SD);
+	clrsetbits_be32(&immr->sysconf.sicrh, SICRH_SPI, SICRH_SPI_SD);
+#endif
 	return 0;
 }
 
 #ifdef CONFIG_FSL_ESDHC
+#if !(CONFIG_IS_ENABLED(DM_MMC))
 int board_mmc_init(bd_t *bd)
 {
 	struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR;
@@ -186,6 +192,7 @@ int board_mmc_init(bd_t *bd)
 	return fsl_esdhc_mmc_init(bd);
 }
 #endif
+#endif
 
 /*
  * Miscellaneous late-boot configurations
configs/MPC837XERDB_defconfig +4 -2
index fd8335ee4e..8ef193a6e5 100644
@@ -160,7 +160,11 @@ CONFIG_CMD_PING=y
 CONFIG_CMD_DATE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="mpc8379erdb"
 CONFIG_ENV_ADDR=0xFE080000
+CONFIG_DM=y
+CONFIG_DM_MMC=y
 CONFIG_FSL_SATA=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD_NOR_FLASH=y
@@ -174,4 +178,3 @@ CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
--

2.14.5

#2 lore raw

PATCH 1/1 mpc8379erdb: Convert to DM_MMC

? Hi Jehoon

Quoted 11 lines · Jaehoon Chung

HI,

Quoted 2 lines · sinan at writeme.com

From: Sinan Akman <[email protected]>

I'm not sure but its subject is strange.
It's not only the converting to DM_MMC. you're adding mpc8397.dtb device-tree. I think you don't add device-tree for only mmc.

It's better to separate patches. "Add devicetree...", " Convert to DM_MMC". It's just my opinion.

? You are right. I will split the patch into two and for dts I will
have only the related nodes.

? Thanks for your comments.

? Regards
? Sinan Akman

#3 lore raw

PATCH v2 1/2 mpc8379erdb: Add device tree

In reply to Jaehoon Chung

From: Sinan Akman <[email protected]>

---
Changes for v2:
- Split patches for device tree and DM_MMC

 arch/powerpc/dts/Makefile        |  1 +
 arch/powerpc/dts/mpc8379erdb.dts | 74 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 75 insertions(+)
 create mode 100644 arch/powerpc/dts/mpc8379erdb.dts
arch/powerpc/dts/Makefile +1 -0
index 3195351c9c..e3ec033096 100644
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0+
 
+dtb-$(CONFIG_TARGET_MPC837XERDB) += mpc8379erdb.dtb
 dtb-$(CONFIG_TARGET_MPC8548CDS) += mpc8548cds.dtb mpc8548cds_36b.dtb
 dtb-$(CONFIG_TARGET_P1020RDB_PC) += p1020rdb-pc.dtb p1020rdb-pc_36b.dtb
 dtb-$(CONFIG_TARGET_P1020RDB_PD) += p1020rdb-pd.dtb
arch/powerpc/dts/mpc8379erdb.dts new file +74 -0

74 lines not on this page · raw message

--
2.14.5

#4 lore raw

PATCH v2 2/2 mpc8379erdb: Convert to DM_MMC

From: Sinan Akman <[email protected]>

---
Changes for v2:
- Split patches for device tree and DM_MMC

 board/freescale/mpc837xerdb/mpc837xerdb.c | 9 ++++++++-
 configs/MPC837XERDB_defconfig             | 5 ++++-
 2 files changed, 12 insertions(+), 2 deletions(-)
board/freescale/mpc837xerdb/mpc837xerdb.c +8 -1
index 45038acf32..9321952674 100644
@@ -136,8 +136,8 @@ int checkboard(void)
 
 int board_early_init_f(void)
 {
-#ifdef CONFIG_FSL_SERDES
 	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+#ifdef CONFIG_FSL_SERDES
 	u32 spridr = in_be32(&immr->sysconf.spridr);
 
 	/* we check only part num, and don't look for CPU revisions */
@@ -164,10 +164,16 @@ int board_early_init_f(void)
 		break;
 	}
 #endif /* CONFIG_FSL_SERDES */
+
+#ifdef CONFIG_FSL_ESDHC
+	clrsetbits_be32(&immr->sysconf.sicrl, SICRL_USB_B, SICRL_USB_B_SD);
+	clrsetbits_be32(&immr->sysconf.sicrh, SICRH_SPI, SICRH_SPI_SD);
+#endif
 	return 0;
 }
 
 #ifdef CONFIG_FSL_ESDHC
+#if !(CONFIG_IS_ENABLED(DM_MMC))
 int board_mmc_init(bd_t *bd)
 {
 	struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR;
@@ -186,6 +192,7 @@ int board_mmc_init(bd_t *bd)
 	return fsl_esdhc_mmc_init(bd);
 }
 #endif
+#endif
 
 /*
  * Miscellaneous late-boot configurations
configs/MPC837XERDB_defconfig +4 -1
index fd8335ee4e..8ef193a6e5 100644
@@ -160,7 +160,11 @@ CONFIG_CMD_PING=y
 CONFIG_CMD_DATE=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="mpc8379erdb"
 CONFIG_ENV_ADDR=0xFE080000
+CONFIG_DM=y
+CONFIG_DM_MMC=y
 CONFIG_FSL_SATA=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD_NOR_FLASH=y
@@ -174,4 +178,3 @@ CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y

--
2.14.5

#5 lore raw

PATCH v2 2/2 mpc8379erdb: Convert to DM_MMC

Quoted 3 lines · sinan at writeme.com

From: Sinan Akman <[email protected]>

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210222/293b5d7a/attachment.sig>
#6 lore raw

PATCH v2 1/2 mpc8379erdb: Add device tree

In reply to sinan at writeme.com
Quoted 3 lines · sinan at writeme.com

From: Sinan Akman <[email protected]>

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210222/7ecc3e99/attachment.sig>