pinctrl: tegra: Add support to display pin function
Subsystems (3)
PATCH 1/1 pinctrl: tegra: Add support to display pin function
The current function for a given pin is not displayed via the debugfs. Add support to display the current function that is set for each pin.
--- drivers/pinctrl/tegra/pinctrl-tegra.c | 19 +++++++++++++++++-- drivers/pinctrl/tegra/pinctrl-tegra.h | 2 ++ 2 files changed, 19 insertions(+), 2 deletions(-)
drivers/pinctrl/tegra/pinctrl-tegra.c +17 -2
@@ -96,6 +96,7 @@ static const struct cfg_param { {"nvidia,slew-rate-falling", TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING}, {"nvidia,slew-rate-rising", TEGRA_PINCONF_PARAM_SLEW_RATE_RISING}, {"nvidia,drive-type", TEGRA_PINCONF_PARAM_DRIVE_TYPE}, + {"nvidia,func", TEGRA_PINCONF_PARAM_FUNCTION}, }; static int tegra_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
@@ -470,6 +471,12 @@ static int tegra_pinconf_reg(struct tegra_pmx *pmx, *bit = g->drvtype_bit; *width =2 ;break ; +case TEGRA_PINCONF_PARAM_FUNCTION : + *bank = g->mux_bank; + *reg = g->mux_reg; + *bit = g->mux_bit; + *width =2 ; +break ;default :dev_err (pmx->dev,"Invalid config param %04x\n" , param);return -ENOTSUPP ;
@@ -620,6 +627,7 @@ static void tegra_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,s8 bank, bit, width;s32 reg;u32 val; +u8 idx; g = &pmx->soc->groups[group];
@@ -633,8 +641,15 @@ static void tegra_pinconf_group_dbg_show(struct pinctrl_dev *pctldev, val >>= bit; val &= (1 << width) -1 ; -seq_printf (s,"\n\t%s=%u" , -strip_prefix (cfg_params[i].property), val); +if (cfg_params[i].param ==TEGRA_PINCONF_PARAM_FUNCTION ) { + idx = pmx->soc->groups[group].funcs[val]; +seq_printf (s,"\n\t%s=%s" , +strip_prefix (cfg_params[i].property), + pmx->functions[idx].name); + }else { +seq_printf (s,"\n\t%s=%u" , +strip_prefix (cfg_params[i].property), val); + } } }
drivers/pinctrl/tegra/pinctrl-tegra.h +2 -0
@@ -54,6 +54,8 @@ enum tegra_pinconf_param {TEGRA_PINCONF_PARAM_SLEW_RATE_RISING ,/* argument: Integer, range is HW-dependant */ TEGRA_PINCONF_PARAM_DRIVE_TYPE , +/* argument: pinmux settings */ + TEGRA_PINCONF_PARAM_FUNCTION, }; enum tegra_pinconf_pull {
Signature · 1 line
2.17.1
Quoted 14 lines · Prathamesh Shete
The current function for a given pin is not displayed via the debugfs. Add support to display the current function that is set for each pin.
Signed-off-by Prathamesh Shete <[email protected]>--- drivers/pinctrl/tegra/pinctrl-tegra.c | 19 +++++++++++++++++-- drivers/pinctrl/tegra/pinctrl-tegra.h | 2 ++ 2 files changed, 19 insertions(+), 2 deletions(-)drivers/pinctrl/tegra/pinctrl-tegra.c +0
-0
drivers/pinctrl/tegra/pinctrl-tegra.c static const struct cfg_param { · line 99
Quoted 4 lines
drivers/pinctrl/tegra/pinctrl-tegra.c +1
-0@@ -96,6 +96,7 @@ static const struct cfg_param { {"nvidia,slew-rate-falling", TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING}, {"nvidia,slew-rate-rising", TEGRA_PINCONF_PARAM_SLEW_RATE_RISING}, {"nvidia,drive-type", TEGRA_PINCONF_PARAM_DRIVE_TYPE}, + {"nvidia,func", TEGRA_PINCONF_PARAM_FUNCTION},
Device tree bindings define the "nvidia,function" property to contain this information, so shouldn't we use the same name here?
Thierry
PATCH v2 1/1 pinctrl: tegra: Add support to display pin function
The current function for a given pin is not displayed via the debugfs. Add support to display the current function that is set for each pin.
--- drivers/pinctrl/tegra/pinctrl-tegra.c | 19 +++++++++++++++++-- drivers/pinctrl/tegra/pinctrl-tegra.h | 2 ++ 2 files changed, 19 insertions(+), 2 deletions(-)
drivers/pinctrl/tegra/pinctrl-tegra.c +17 -2
@@ -96,6 +96,7 @@ static const struct cfg_param { {"nvidia,slew-rate-falling", TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING}, {"nvidia,slew-rate-rising", TEGRA_PINCONF_PARAM_SLEW_RATE_RISING}, {"nvidia,drive-type", TEGRA_PINCONF_PARAM_DRIVE_TYPE}, + {"nvidia,function", TEGRA_PINCONF_PARAM_FUNCTION}, }; static int tegra_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
@@ -470,6 +471,12 @@ static int tegra_pinconf_reg(struct tegra_pmx *pmx, *bit = g->drvtype_bit; *width =2 ;break ; +case TEGRA_PINCONF_PARAM_FUNCTION : + *bank = g->mux_bank; + *reg = g->mux_reg; + *bit = g->mux_bit; + *width =2 ; +break ;default :dev_err (pmx->dev,"Invalid config param %04x\n" , param);return -ENOTSUPP ;
@@ -620,6 +627,7 @@ static void tegra_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,s8 bank, bit, width;s32 reg;u32 val; +u8 idx; g = &pmx->soc->groups[group];
@@ -633,8 +641,15 @@ static void tegra_pinconf_group_dbg_show(struct pinctrl_dev *pctldev, val >>= bit; val &= (1 << width) -1 ; -seq_printf (s,"\n\t%s=%u" , -strip_prefix (cfg_params[i].property), val); +if (cfg_params[i].param ==TEGRA_PINCONF_PARAM_FUNCTION ) { + idx = pmx->soc->groups[group].funcs[val]; +seq_printf (s,"\n\t%s=%s" , +strip_prefix (cfg_params[i].property), + pmx->functions[idx].name); + }else { +seq_printf (s,"\n\t%s=%u" , +strip_prefix (cfg_params[i].property), val); + } } }
drivers/pinctrl/tegra/pinctrl-tegra.h +2 -0
@@ -54,6 +54,8 @@ enum tegra_pinconf_param {TEGRA_PINCONF_PARAM_SLEW_RATE_RISING ,/* argument: Integer, range is HW-dependant */ TEGRA_PINCONF_PARAM_DRIVE_TYPE , +/* argument: pinmux settings */ + TEGRA_PINCONF_PARAM_FUNCTION, }; enum tegra_pinconf_pull {
Signature · 1 line
2.17.1
Quoted 35 lines · Prathamesh Shete
The current function for a given pin is not displayed via the debugfs. Add support to display the current function that is set for each pin.
Signed-off-by Prathamesh Shete <[email protected]>--- drivers/pinctrl/tegra/pinctrl-tegra.c | 19 +++++++++++++++++-- drivers/pinctrl/tegra/pinctrl-tegra.h | 2 ++ 2 files changed, 19 insertions(+), 2 deletions(-)drivers/pinctrl/tegra/pinctrl-tegra.c +7
-0@@ -96,6 +96,7 @@ static const struct cfg_param { {"nvidia,slew-rate-falling", TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING}, {"nvidia,slew-rate-rising", TEGRA_PINCONF_PARAM_SLEW_RATE_RISING}, {"nvidia,drive-type", TEGRA_PINCONF_PARAM_DRIVE_TYPE}, + {"nvidia,function", TEGRA_PINCONF_PARAM_FUNCTION}, }; static int tegra_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,@@ -470,6 +471,12 @@ static int tegra_pinconf_reg(struct tegra_pmx *pmx, *bit = g->drvtype_bit; *width =2 ;break ; +case TEGRA_PINCONF_PARAM_FUNCTION : + *bank = g->mux_bank; + *reg = g->mux_reg; + *bit = g->mux_bit; + *width =2 ; +break ;default :dev_err (pmx->dev,"Invalid config param %04x\n" , param);return -ENOTSUPP ;
drivers/pinctrl/tegra/pinctrl-tegra.c static void tegra_pinconf_group_dbg_show(struct pinctrl_dev *pctldev, · line 630
Quoted 4 lines
drivers/pinctrl/tegra/pinctrl-tegra.c +1
-0@@ -620,6 +627,7 @@ static void tegra_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,s8 bank, bit, width;s32 reg;u32 val; +u8 idx;
This declaration could be moved into the only conditional that uses this variable...
drivers/pinctrl/tegra/pinctrl-tegra.c static void tegra_pinconf_group_dbg_show(struct pinctrl_dev *pctldev, · line 645
Quoted 11 lines
drivers/pinctrl/tegra/pinctrl-tegra.c +2
-2g = &pmx->soc->groups[group];@@ -633,8 +641,15 @@ static void tegra_pinconf_group_dbg_show(struct pinctrl_dev *pctldev, val >>= bit; val &= (1 << width) -1 ; -seq_printf (s,"\n\t%s=%u" , -strip_prefix (cfg_params[i].property), val); +if (cfg_params[i].param ==TEGRA_PINCONF_PARAM_FUNCTION ) { + idx = pmx->soc->groups[group].funcs[val];
... so that this would become:
u8 idx = ...;
Either way:
Quoted 58 lines · Thierry Reding
Quoted 35 lines · Prathamesh Shete
The current function for a given pin is not displayed via the debugfs. Add support to display the current function that is set for each pin.
Signed-off-by Prathamesh Shete <[email protected]>--- drivers/pinctrl/tegra/pinctrl-tegra.c | 19 +++++++++++++++++-- drivers/pinctrl/tegra/pinctrl-tegra.h | 2 ++ 2 files changed, 19 insertions(+), 2 deletions(-)drivers/pinctrl/tegra/pinctrl-tegra.c +7
-0@@ -96,6 +96,7 @@ static const struct cfg_param { {"nvidia,slew-rate-falling", TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING}, {"nvidia,slew-rate-rising", TEGRA_PINCONF_PARAM_SLEW_RATE_RISING}, {"nvidia,drive-type", TEGRA_PINCONF_PARAM_DRIVE_TYPE}, + {"nvidia,function", TEGRA_PINCONF_PARAM_FUNCTION}, }; static int tegra_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,@@ -470,6 +471,12 @@ static int tegra_pinconf_reg(struct tegra_pmx *pmx, *bit = g->drvtype_bit; *width =2 ;break ; +case TEGRA_PINCONF_PARAM_FUNCTION : + *bank = g->mux_bank; + *reg = g->mux_reg; + *bit = g->mux_bit; + *width =2 ; +break ;default :dev_err (pmx->dev,"Invalid config param %04x\n" , param);return -ENOTSUPP ;drivers/pinctrl/tegra/pinctrl-tegra.c static void tegra_pinconf_group_dbg_show(struct pinctrl_dev *pctldev, · line 630
Quoted 4 lines
drivers/pinctrl/tegra/pinctrl-tegra.c +1
-0@@ -620,6 +627,7 @@ static void tegra_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,s8 bank, bit, width;s32 reg;u32 val; +u8 idx;This declaration could be moved into the only conditional that uses this variable...
drivers/pinctrl/tegra/pinctrl-tegra.c static void tegra_pinconf_group_dbg_show(struct pinctrl_dev *pctldev, · line 645
Quoted 11 lines
drivers/pinctrl/tegra/pinctrl-tegra.c +2
-2g = &pmx->soc->groups[group];@@ -633,8 +641,15 @@ static void tegra_pinconf_group_dbg_show(struct pinctrl_dev *pctldev, val >>= bit; val &= (1 << width) -1 ; -seq_printf (s,"\n\t%s=%u" , -strip_prefix (cfg_params[i].property), val); +if (cfg_params[i].param ==TEGRA_PINCONF_PARAM_FUNCTION ) { + idx = pmx->soc->groups[group].funcs[val];... so that this would become:
Quoted 5 lines
u8 idx = ...;Either way:
Acked-by Thierry Reding <[email protected]>
Looks good to me ...
Thanks!
Jon
Signature · 1 line
nvpublic
PATCH v3 1/1 pinctrl: tegra: Add support to display pin function
The current function for a given pin is not displayed via the debugfs. Add support to display the current function that is set for each pin.
--- drivers/pinctrl/tegra/pinctrl-tegra.c | 19 +++++++++++++++++-- drivers/pinctrl/tegra/pinctrl-tegra.h | 2 ++ 2 files changed, 19 insertions(+), 2 deletions(-)
drivers/pinctrl/tegra/pinctrl-tegra.c +17 -2
@@ -96,6 +96,7 @@ static const struct cfg_param { {"nvidia,slew-rate-falling", TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING}, {"nvidia,slew-rate-rising", TEGRA_PINCONF_PARAM_SLEW_RATE_RISING}, {"nvidia,drive-type", TEGRA_PINCONF_PARAM_DRIVE_TYPE}, + {"nvidia,function", TEGRA_PINCONF_PARAM_FUNCTION}, }; static int tegra_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
@@ -470,6 +471,12 @@ static int tegra_pinconf_reg(struct tegra_pmx *pmx, *bit = g->drvtype_bit; *width =2 ;break ; +case TEGRA_PINCONF_PARAM_FUNCTION : + *bank = g->mux_bank; + *reg = g->mux_reg; + *bit = g->mux_bit; + *width =2 ; +break ;default :dev_err (pmx->dev,"Invalid config param %04x\n" , param);return -ENOTSUPP ;
@@ -633,8 +640,16 @@ static void tegra_pinconf_group_dbg_show(struct pinctrl_dev *pctldev, val >>= bit; val &= (1 << width) -1 ; -seq_printf (s,"\n\t%s=%u" , -strip_prefix (cfg_params[i].property), val); +if (cfg_params[i].param ==TEGRA_PINCONF_PARAM_FUNCTION ) { +u8 idx = pmx->soc->groups[group].funcs[val]; + +seq_printf (s,"\n\t%s=%s" , +strip_prefix (cfg_params[i].property), + pmx->functions[idx].name); + }else { +seq_printf (s,"\n\t%s=%u" , +strip_prefix (cfg_params[i].property), val); + } } }
drivers/pinctrl/tegra/pinctrl-tegra.h +2 -0
@@ -54,6 +54,8 @@ enum tegra_pinconf_param {TEGRA_PINCONF_PARAM_SLEW_RATE_RISING ,/* argument: Integer, range is HW-dependant */ TEGRA_PINCONF_PARAM_DRIVE_TYPE , +/* argument: pinmux settings */ + TEGRA_PINCONF_PARAM_FUNCTION, }; enum tegra_pinconf_pull {
Signature · 1 line
2.17.1
Quoted 6 lines · Prathamesh Shete
The current function for a given pin is not displayed via the debugfs. Add support to display the current function that is set for each pin.
Signed-off-by Prathamesh Shete <[email protected]>Acked-by Thierry Reding <[email protected]>Reviewed-by Jon Hunter <[email protected]>
Patch applied.
Yours,
Linus Walleij
Hello Prathamesh Shete,
Quoted 6 lines · On Fri, 14 Jul 2023 17:05:47 +0530 Prathamesh Shete <[email protected]> wrote:
The current function for a given pin is not displayed via the debugfs. Add support to display the current function that is set for each pin.
Signed-off-by Prathamesh Shete <[email protected]>Acked-by Thierry Reding <[email protected]>Reviewed-by Jon Hunter <[email protected]>
While testing a Tegra20-based custom board I found a regression which according to my bisecting appears starting with this patch (commit d1cd5b51bc91 upstream).
The symptom is that i2c3 is not working anymore, the I2C lines being always high. No other known issues at the moment.
The board is built around an Avionic Design Tamonten SOM:arch/arm/boot/dts/nvidia/tegra20-tamonten.dtsi, which has in the &state_default node:
dtf {
nvidia,pins = "dtf";
nvidia,function = "i2c3";
};But on top of that the board dts has:
&state_default {
dtf {
nvidia,pins = "dtf";
nvidia,function = "i2c3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
};drivers/pinctrl/tegra/pinctrl-tegra.c static const struct cfg_param { · line 99
Quoted 9 lines
drivers/pinctrl/tegra/pinctrl-tegra.c +1
-0@@ -96,6 +96,7 @@ static const struct cfg_param { {"nvidia,slew-rate-falling", TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING}, {"nvidia,slew-rate-rising", TEGRA_PINCONF_PARAM_SLEW_RATE_RISING}, {"nvidia,drive-type", TEGRA_PINCONF_PARAM_DRIVE_TYPE}, + {"nvidia,function", TEGRA_PINCONF_PARAM_FUNCTION},
FYI, I reduced your patch to only this line plus the one in the pinctrl-tegra.h and the problem appears as well.
This is all the info I have at the moment. Can you provide more info on what could be going on or how to investigate?
I am available to share more info as needed.
Best regards,
Luca
Signature · 3 lines
Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Quoted 2 lines · Luca Ceresoli
The symptom is that i2c3 is not working anymore, the I2C lines being always high. No other known issues at the moment.
Hm....
Quoted 4 lines
Quoted 1 line
+ {"nvidia,function",
TEGRA_PINCONF_PARAM_FUNCTION},FYI, I reduced your patch to only this line plus the one in the
pinctrl-tegra.hand the problem appears as well.
I think there is a conflict now, that the pinconf is "stealing" the function assignment from the pinmux call.
It's just a debugprint, I will revert the patch, Luca can investigate and you can test a new patch then we will merge that.
Yours,
Linus Walleij
Hello Linus, Prathamesh,
Quoted 9 lines · On Wed, 27 Sep 2023 10:54:15 +0200 Linus Walleij <[email protected]>…
Quoted 2 lines · Luca Ceresoli
The symptom is that i2c3 is not working anymore, the I2C lines being always high. No other known issues at the moment.
Hm....
Quoted 2 lines
Quoted 1 line
+ {"nvidia,function",
TEGRA_PINCONF_PARAM_FUNCTION},
Quoted 7 lines
Quoted 2 lines
FYI, I reduced your patch to only this line plus the one in the
pinctrl-tegra.hand the problem appears as well.I think there is a conflict now, that the pinconf is "stealing" the function assignment from the pinmux call.
It's just a debugprint, I will revert the patch, Luca can investigate and you
Thanks for the quick revert Linus.
Quoted 1 line
can test a new patch then we will merge that.
Prathamesh, if you send a new patch it would be great if you can Cc: me so I can test it.
Best regards,
Luca
Signature · 3 lines
Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Quoted 20 lines · Luca Ceresoli
Hello Linus, Prathamesh,
Quoted 15 lines · On Wed, 27 Sep 2023 10:54:15 +0200 Linus Walleij <[email protected]>…
Quoted 2 lines · Luca Ceresoli
The symptom is that i2c3 is not working anymore, the I2C lines being always high. No other known issues at the moment.
Hm....
Quoted 4 lines
Quoted 1 line
+ {"nvidia,function",
TEGRA_PINCONF_PARAM_FUNCTION},FYI, I reduced your patch to only this line plus the one in the
pinctrl-tegra.hand the problem appears as well.I think there is a conflict now, that the pinconf is "stealing" the function assignment from the pinmux call.
Quoted 8 lines
Quoted 1 line
It's just a debugprint, I will revert the patch, Luca can investigate and you
Thanks for the quick revert Linus.
Quoted 1 line
can test a new patch then we will merge that.
Prathamesh, if you send a new patch it would be great if you can Cc: me so I can test it.
I was able to reproduce this on tegra20-trimslice, and it looks indeed that the "shortcut" of supporting this through the pinconf "framework" doesn't work. In addition to the pinmux now no longer getting applied (exactly why that is I don't think I understand), it also leads to weird things in other parts of the debugfs output. For example the code now ends up trying to read a u32 from the nvidia,function property, which is actually a string. That seems to be fine, but obviously it doesn't yield the value that is expected for a function and messes up the config param which will then later on fail to properly display.
Anyway, turns out the correct implementation is even shorter. I've sent out a patch.
Thierry