Skip to contentSkip to conversation

ktest help

DISCUSSION Steven Rostedt 2 participants 7 messages Apr 6, 2017 3 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw

I added LKML (others may want to know this too), and John, who's going to help me maintain ktest.

Quoted 9 lines · On Thu, 6 Apr 2017 11:34:45 -0500 Timur Tabi <[email protected]> wrote:
Quoted 3 lines · Steven Rostedt
Quoted 2 lines
Quoted 2 lines

Why is it prompting me for the MACHINE when I've specified it in the ktest.conf file?

My answer is above. If you have other questions, feel free to ask.

Thank you, that fixed it. I will submit a patch that adds a note so that no one else makes that mistake.

Do you have any more sample kconf files? I'm trying to get ktest to work

I have lots of kconf files. ktest is basically the only way I build my kernels now :-)

Quoted 5 lines

with my environment. The way I boot my target is, after it's powered on, the system PXE boots a Grub. From that screen, I press 'c' to get the command line, where I enter a command prompt and then type in "boot". Like this:

Quoted 8 lines

grub> linux AUSB33_SDP_Linux/Image.q rootwait rw ip=dhcp root=/dev/sda2 rootfstype=ext4 panic=1 acpi.debug_level=2 earlycon=pl011,0xff78ed1000,qdf2400_e44
grub> boot

This tftp's the kernel image (Image.q) and then boots. I'm having difficulty figuring out how to implement that in ktest.

Can you make a script do this? If so, then you can simply tell ktest to call that script. See the options SWITCH_TO_TEST and SWITCH_TO_GOOD.

-- Steve

#4 lore raw
Quoted 6 lines · Steven Rostedt
Quoted 4 lines
Quoted 4 lines

This tftp's the kernel image (Image.q) and then boots. I'm having difficulty figuring out how to implement that in ktest.

Can you make a script do this? If so, then you can simply tell ktest to call that script. See the options SWITCH_TO_TEST and SWITCH_TO_GOOD.

Not really. Today, I literally copy/paste that command into my putty session every time I boot. I currently have a poor-mans-ktest that I use today, that I'm hoping to replace with ktest itself. It's a Python script that uses pexpect to communicate with a serial-to-ethernet device. It's fragile and ugly, but it generally works:

def pxe_boot(child, kernel):
global options
global args

print 'Looking for Grub prompt'

count = 24 # two minutes, twice
while True:
child.sendline('c')
try:
child.expect('grub> ', timeout = 10)
break
except pexpect.TIMEOUT as e:
count -= 1
if count == 0:
print 'Boot failed'
return
if count == 12:
bmc_reboot(options.bmc)
print 'Rebooting via BMC'
else:
print 'Still waiting ...'
pass

print 'Loading kernel %s' % sys.argv[1]
if options.amberwing:
child.sendline('linux %s earlycon=pl011,0xff78ed1000 console=ttyAMA1
rootwait rw ip=dhcp root=/dev/sda2 rootfstype=ext4 panic=1' % args[0])

    else:
        child.sendline('linux %s earlycon=pl011,mmio32,0x3ced1000

console=ttyAMA0 rootwait rw ip=dhcp root=/dev/sda2 rootfstype=ext4 panic=1' % args[0])
child.expect('grub> ', timeout = 60)
print 'Booting Linux'
child.sendline('boot')

Is there a way I can send a "boot" command after ktest connects to the console?

Signature · 3 lines
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc.  Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
#5 lore raw
Quoted 2 lines · On Thu, 6 Apr 2017 12:01:37 -0500 Timur Tabi <[email protected]> wrote:

Is there a way I can send a "boot" command after ktest connects to the console?

Not currently, but that is something I've been wanting to add for some time.

John?

-- Steve

#6 lore raw
Quoted 4 lines · Steven Rostedt
Quoted 2 lines
Quoted 2 lines

Is there a way I can send a "boot" command after ktest connects to the console?

Not currently, but that is something I've been wanting to add for some time.

So are you saying that ktest depends on the target booting from power-on all the way to the login prompt without any user intervention?

Signature · 3 lines
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc.  Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
#7 lore raw
Quoted 9 lines · On Thu, 6 Apr 2017 13:39:00 -0500 Timur Tabi <[email protected]> wrote:
Quoted 4 lines · Steven Rostedt
Quoted 2 lines
Quoted 2 lines

Is there a way I can send a "boot" command after ktest connects to the console?

Not currently, but that is something I've been wanting to add for some time.

So are you saying that ktest depends on the target booting from power-on all the way to the login prompt without any user intervention?

Currently yes, but it shouldn't be hard to add a hook to intervene. I just haven't had something that required it yet.

-- Steve

#8 lore raw
Quoted 2 lines · Steven Rostedt

Currently yes, but it shouldn't be hard to add a hook to intervene. I just haven't had something that required it yet.

If I understood Perl, I would add the feature myself.

Signature · 3 lines
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc.  Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
#9 lore raw
Quoted 6 lines · On Thu, 6 Apr 2017 13:53:59 -0500 Timur Tabi <[email protected]> wrote:
Quoted 2 lines · Steven Rostedt

Currently yes, but it shouldn't be hard to add a hook to intervene. I just haven't had something that required it yet.

If I understood Perl, I would add the feature myself.

I might be able to come up with something this week, that you can test.

-- Steve