devlink: display elapsed time during flash update
Subsystems (2)
PATCH v3 1/1 devlink: display elapsed time during flash update
For some devices, updating the flash can take significant time during operations where no status can meaningfully be reported. This can be somewhat confusing to a user who sees devlink appear to hang on the terminal waiting for the device to update.
Recent changes to the kernel interface allow such long running commands to provide a timeout value indicating some upper bound on how long the relevant action could take.
Provide a ticking counter of the time elapsed since the previous status message in order to make it clear that the program is not simply stuck.
Display this message whenever the status message from the kernel indicates a timeout value. Additionally also display the message if we've received no status for more than couple of seconds. If we elapse more than the timeout provided by the status message, replace the timeout display with "timeout reached".
---
Changes since v2
* use clock_gettime on CLOCK_MONOTONIC instead of gettimeofday
* remove use of timersub since we're now using struct timespec
devlink/devlink.c | 105 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 104 insertions(+), 1 deletion(-)
devlink/devlink.c +104 -1
@@ -33,6 +33,7 @@#include <sys/select.h> #include <sys/socket.h> #include <sys/types.h> +#include <sys/time.h> #include <rt_names.h> #include "version.h"
@@ -3110,6 +3111,9 @@ static int cmd_dev_info(struct dl *dl)struct cmd_dev_flash_status_ctx {struct dl *dl; +struct timespec time_of_last_status; +uint64_t status_msg_timeout; +size_t elapsed_time_msg_len;char *last_msg;char *last_component; uint8_t not_first:1,
@@ -3127,6 +3131,16 @@ static int nullstrcmp(const char *str1, const char *str2)return str1 ?1 :-1 ; } +static void cmd_dev_flash_clear_elapsed_time (struct cmd_dev_flash_status_ctx *ctx) +{ +int i; + +for (i =0 ; i < ctx->elapsed_time_msg_len; i++) +pr_out_tty ("\b \b" ); + + ctx->elapsed_time_msg_len =0 ; +} +static int cmd_dev_flash_status_cb (const struct nlmsghdr *nlh,void *data) {struct cmd_dev_flash_status_ctx *ctx = data;
@@ -3139,6 +3153,8 @@ static int cmd_dev_flash_status_cb(const struct nlmsghdr *nlh, void *data)const char *bus_name;const char *dev_name; +cmd_dev_flash_clear_elapsed_time (ctx); +if (genl->cmd !=DEVLINK_CMD_FLASH_UPDATE_STATUS && genl->cmd !=DEVLINK_CMD_FLASH_UPDATE_END )return MNL_CB_STOP ;
@@ -3168,12 +3184,19 @@ static int cmd_dev_flash_status_cb(const struct nlmsghdr *nlh, void *data) done =mnl_attr_get_u64 (tb[DEVLINK_ATTR_FLASH_UPDATE_STATUS_DONE ]);if (tb[DEVLINK_ATTR_FLASH_UPDATE_STATUS_TOTAL ]) total =mnl_attr_get_u64 (tb[DEVLINK_ATTR_FLASH_UPDATE_STATUS_TOTAL ]); +if (tb[DEVLINK_ATTR_FLASH_UPDATE_STATUS_TIMEOUT ]) + ctx->status_msg_timeout =mnl_attr_get_u64 (tb[DEVLINK_ATTR_FLASH_UPDATE_STATUS_TIMEOUT ]); +else + ctx->status_msg_timeout =0 ;if (!nullstrcmp (msg, ctx->last_msg) && !nullstrcmp (component, ctx->last_component) && ctx->last_pc && ctx->not_first) {pr_out_tty ("\b\b\b\b\b" );/* clean percentage */ }else { +/* only update the last status timestamp if the message changed */ +clock_gettime (CLOCK_MONOTONIC , &ctx->time_of_last_status); +if (ctx->not_first)pr_out ("\n" );if (component) {
@@ -3199,11 +3222,78 @@ static int cmd_dev_flash_status_cb(const struct nlmsghdr *nlh, void *data)return MNL_CB_STOP ; } +static void cmd_dev_flash_time_elapsed (struct cmd_dev_flash_status_ctx *ctx) +{ +struct timespec now, res; + +clock_gettime (CLOCK_MONOTONIC , &now); + + res.tv_sec = now.tv_sec - ctx->time_of_last_status.tv_sec; + res.tv_nsec = now.tv_nsec - ctx->time_of_last_status.tv_nsec; +if (res.tv_nsec <0 ) { + res.tv_sec--; + res.tv_nsec +=1000000000L ; + } + +/* Only begin displaying an elapsed time message if we've waited a few +* seconds with no response, or the status message included a timeout +* value. +*/ +if (res.tv_sec >2 || ctx->status_msg_timeout) { +uint64_t elapsed_m, elapsed_s; +char msg[128 ]; +size_t len; + +/* clear the last elapsed time message, if we have one */ +cmd_dev_flash_clear_elapsed_time (ctx); + + elapsed_m = res.tv_sec /60 ; + elapsed_s = res.tv_sec %60 ; + +/** +* If we've elapsed a few seconds without receiving any status +* notification from the device, we display a time elapsed +* message. This has a few possible formats: +* +* 1) just time elapsed, when no timeout was provided +* " ( Xm Ys )" +* 2) time elapsed out of a timeout that came from the device +* driver via DEVLINK_CMD_FLASH_UPDATE_STATUS_TIMEOUT +* " ( Xm Ys : Am Ys)" +* 3) time elapsed if we still receive no status after +* reaching the provided timeout. +* " ( Xm Ys : timeout reached )" +*/ +if (!ctx->status_msg_timeout) { + len =snprintf (msg,sizeof (msg), +" ( %lum %lus )" , elapsed_m, elapsed_s); + }else if (res.tv_sec <= ctx->status_msg_timeout) { +uint64_t timeout_m, timeout_s; + + timeout_m = ctx->status_msg_timeout /60 ; + timeout_s = ctx->status_msg_timeout %60 ; + + len =snprintf (msg,sizeof (msg), +" ( %lum %lus : %lum %lus )" , + elapsed_m, elapsed_s, timeout_m, timeout_s); + }else { + len =snprintf (msg,sizeof (msg), +" ( %lum %lus : timeout reached )" , elapsed_m, elapsed_s); + } + + ctx->elapsed_time_msg_len = len; + +pr_out_tty ("%s" , msg); +fflush (stdout); + } +} +static int cmd_dev_flash_fds_process (struct cmd_dev_flash_status_ctx *ctx,struct mnlg_socket *nlg_ntf,int pipe_r) {int nlfd =mnlg_socket_get_fd (nlg_ntf); +struct timeval timeout;fd_set fds[3 ];int fdmax;int i;
@@ -3218,7 +3308,14 @@ static int cmd_dev_flash_fds_process(struct cmd_dev_flash_status_ctx *ctx,if (nlfd >= fdmax) fdmax = nlfd +1 ; -while (select (fdmax, &fds[0 ], &fds[1 ], &fds[2 ],NULL ) <0 ) { +/* select only for a short while (1/10th of a second) in order to +* allow periodically updating the screen with an elapsed time +* indicator. +*/ + timeout.tv_sec =0 ; + timeout.tv_usec =100000 ; + +while (select (fdmax, &fds[0 ], &fds[1 ], &fds[2 ], &timeout) <0 ) {if (errno ==EINTR )continue ;pr_err ("select() failed\n" );
@@ -3240,6 +3337,7 @@ static int cmd_dev_flash_fds_process(struct cmd_dev_flash_status_ctx *ctx,return err2; ctx->flash_done =1 ; } +cmd_dev_flash_time_elapsed (ctx);return 0 ; }
@@ -3300,6 +3398,11 @@ static int cmd_dev_flash(struct dl *dl) }close (pipe_w); +/* initialize starting time to allow comparison for when to begin +* displaying a time elapsed message. +*/ +clock_gettime (CLOCK_MONOTONIC , &ctx.time_of_last_status); + do { err = cmd_dev_flash_fds_process(&ctx, nlg_ntf, pipe_r); if (err)
base-commit: b5a583fb32950aaad62ddefa64f791ab432e30e3
Signature · 1 line
2.28.0.497.g54e85e7af1ac
Quoted 12 lines · Thu, Oct 15, 2020 at 12:31:04AM CEST, [email protected] wrote:
For some devices, updating the flash can take significant time during operations where no status can meaningfully be reported. This can be somewhat confusing to a user who sees devlink appear to hang on the terminal waiting for the device to update.
Recent changes to the kernel interface allow such long running commands to provide a timeout value indicating some upper bound on how long the relevant action could take.
Provide a ticking counter of the time elapsed since the previous status message in order to make it clear that the program is not simply stuck.
Quoted 7 lines
Display this message whenever the status message from the kernel indicates a timeout value. Additionally also display the message if we've received no status for more than couple of seconds. If we elapse more than the timeout provided by the status message, replace the timeout display with "timeout reached".
Signed-off-by Jacob Keller <[email protected]>
David Ahern
AppliedQuoted 18 lines · Jacob Keller
For some devices, updating the flash can take significant time during operations where no status can meaningfully be reported. This can be somewhat confusing to a user who sees devlink appear to hang on the terminal waiting for the device to update.
Recent changes to the kernel interface allow such long running commands to provide a timeout value indicating some upper bound on how long the relevant action could take.
Provide a ticking counter of the time elapsed since the previous status message in order to make it clear that the program is not simply stuck.
Display this message whenever the status message from the kernel indicates a timeout value. Additionally also display the message if we've received no status for more than couple of seconds. If we elapse more than the timeout provided by the status message, replace the timeout display with "timeout reached".
Quoted 9 lines
Signed-off-by Jacob Keller <[email protected]>---
Changes since v2
* useclock_gettimeonCLOCK_MONOTONICinstead of gettimeofday
* remove use of timersub since we're now using struct timespecdevlink/devlink.c | 105 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 104 insertions(+), 1 deletion(-)
applied to iproute2-next.
The DEVLINK attributes are ridiculously long -- DEVLINK_ATTR_FLASH_UPDATE_STATUS_TIMEOUT is 40 characters -- which forces really long code lines or oddly wrapped lines. Going forward please consider abbreviations on name components to reduce their lengths.
Quoted 37 lines
-----Original Message-----
From: David Ahern <[email protected]>
Sent: Saturday, October 17, 2020 8:35 AM
To: Keller, Jacob E <[email protected]>; [email protected]; Jiri Pirko <[email protected]>
Cc: Shannon Nelson <[email protected]>
Subject: Re: [iproute2-next v3] devlink: display elapsed time during flash updateQuoted 18 lines · Jacob Keller
For some devices, updating the flash can take significant time during operations where no status can meaningfully be reported. This can be somewhat confusing to a user who sees devlink appear to hang on the terminal waiting for the device to update.
Recent changes to the kernel interface allow such long running commands to provide a timeout value indicating some upper bound on how long the relevant action could take.
Provide a ticking counter of the time elapsed since the previous status message in order to make it clear that the program is not simply stuck.
Display this message whenever the status message from the kernel indicates a timeout value. Additionally also display the message if we've received no status for more than couple of seconds. If we elapse more than the timeout provided by the status message, replace the timeout display with "timeout reached".
Quoted 9 lines
Signed-off-by Jacob Keller <[email protected]>---
Changes since v2
* useclock_gettimeonCLOCK_MONOTONICinstead of gettimeofday
* remove use of timersub since we're now using struct timespecdevlink/devlink.c | 105 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 104 insertions(+), 1 deletion(-)
Quoted 6 lines
applied to iproute2-next.
The DEVLINK attributes are ridiculously long --
DEVLINK_ATTR_FLASH_UPDATE_STATUS_TIMEOUTis 40 characters -- which forces really long code lines or oddly wrapped lines. Going forward please consider abbreviations on name components to reduce their lengths.
This is probably a larger discussion, since basically every devlink attribute name is long.
Jiri, Jakub, any thoughts on this? I'd like to see whatever abbreviation scheme we use be consistent.
Thanks,
Jake
Jakub Kicinski
maintainerQuoted 8 lines · Jacob E
Quoted 4 lines
The DEVLINK attributes are ridiculously long --
DEVLINK_ATTR_FLASH_UPDATE_STATUS_TIMEOUTis 40 characters -- which forces really long code lines or oddly wrapped lines. Going forward please consider abbreviations on name components to reduce their lengths.This is probably a larger discussion, since basically every devlink attribute name is long.
Jiri, Jakub, any thoughts on this? I'd like to see whatever abbreviation scheme we use be consistent.
As David said - let's keep an eye on this going forward. We already pushed back with Moshe's live reload work.
If you really want to make things better for this particular name you could probably drop the word _STATUS from it.
Quoted 8 lines · Jakub Kicinski
Quoted 7 lines · Jacob E
Quoted 4 lines
The DEVLINK attributes are ridiculously long --
DEVLINK_ATTR_FLASH_UPDATE_STATUS_TIMEOUTis 40 characters -- which forces really long code lines or oddly wrapped lines. Going forward please consider abbreviations on name components to reduce their lengths.This is probably a larger discussion, since basically every devlink attribute name is long.
Quoted 8 lines
Quoted 1 line
Jiri, Jakub, any thoughts on this? I'd like to see whatever abbreviation scheme we use be consistent.
As David said - let's keep an eye on this going forward. We already pushed back with Moshe's live reload work.
If you really want to make things better for this particular name you could probably drop the word
_STATUSfrom it.
and typical strategies - like dropping vowels.
DEVLINK_ATTR_ is the established prefix so every attribute starts at 13 characters. In this case dropping STATUS and shortening TIMEOUT so it becomes DEVLINK_ATTR_FLASH_UPDATE_TMOUT does not overly harm the readability yet drops the char count to 31. Still long but is an example of what can be done.
Quoted 39 lines · Mon, Oct 19, 2020 at 09:05:34PM CEST, [email protected] wrote:
Quoted 39 lines
-----Original Message-----
From: David Ahern <[email protected]>
Sent: Saturday, October 17, 2020 8:35 AM
To: Keller, Jacob E <[email protected]>; [email protected]; Jiri Pirko <[email protected]>
Cc: Shannon Nelson <[email protected]>
Subject: Re: [iproute2-next v3] devlink: display elapsed time during flash updateQuoted 18 lines · Jacob Keller
For some devices, updating the flash can take significant time during operations where no status can meaningfully be reported. This can be somewhat confusing to a user who sees devlink appear to hang on the terminal waiting for the device to update.
Recent changes to the kernel interface allow such long running commands to provide a timeout value indicating some upper bound on how long the relevant action could take.
Provide a ticking counter of the time elapsed since the previous status message in order to make it clear that the program is not simply stuck.
Display this message whenever the status message from the kernel indicates a timeout value. Additionally also display the message if we've received no status for more than couple of seconds. If we elapse more than the timeout provided by the status message, replace the timeout display with "timeout reached".
Quoted 9 lines
Signed-off-by Jacob Keller <[email protected]>---
Changes since v2
* useclock_gettimeonCLOCK_MONOTONICinstead of gettimeofday
* remove use of timersub since we're now using struct timespecdevlink/devlink.c | 105 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 104 insertions(+), 1 deletion(-)applied to iproute2-next.
Quoted 8 lines
Quoted 4 lines
The DEVLINK attributes are ridiculously long --
DEVLINK_ATTR_FLASH_UPDATE_STATUS_TIMEOUTis 40 characters -- which forces really long code lines or oddly wrapped lines. Going forward please consider abbreviations on name components to reduce their lengths.This is probably a larger discussion, since basically every devlink attribute name is long.
Jiri, Jakub, any thoughts on this? I'd like to see whatever abbreviation scheme we use be consistent.
I prefer long and easy to understand.
Quoted 3 lines
Thanks,
Jake
Quoted 1 line · Jiri Pirko
I prefer long and easy to understand.
and the code needs to be readable as well. There is middle ground here and reasonable naming schemes.