ARM: mark most boards as unused
Subsystems (11)
cover ARM: mark most boards as unused
From: Arnd Bergmann <[email protected]>
Based on the recent mailing list discussion I started [1], I have now turned the findings into a set of patches that marks most board files as 'depends on UNUSED_BOARD_FILES', leaving only 38 of the 196 boards.
Please double-check the lists for each platform to make sure I got the right set. The only functional change here is in the Kconfig dependencies, so I would still apply this as a late fix for the coming merge window, to give any remaining users the most time to run into this and speak up in case any of these boards are actually still in use.
Arnd
Arnd Bergmann (13):
ARM: add ATAGS dependencies to non-DT platforms
ARM: add CONFIG_UNUSED_BOARD_FILES
ARM: pxa: add Kconfig dependencies for ATAGS based boards
ARM: orion: add ATAGS dependencies
ARM: davinci: mark all ATAGS board files as unused
ARM: ep93xx: mark most board files as unused
ARM: mmp: mark all board files for removal
ARM: footbridge: mark cats board for removal
ARM: sa1100: mark most boards as unused
ARM: omap1: add Kconfig dependencies for unused boards
ARM: s3c: mark most board files as unused
ARM: iop32x: mark as unused
ARM: cns3xxx: add CONFIG_UNUSED_BOARD_FILES dependency
arch/arm/Kconfig | 21 ++++++- arch/arm/configs/badge4_defconfig | 1 + arch/arm/configs/cerfcube_defconfig | 1 + arch/arm/configs/cm_x300_defconfig | 1 + arch/arm/configs/cns3420vb_defconfig | 1 + arch/arm/configs/colibri_pxa270_defconfig | 1 + arch/arm/configs/colibri_pxa300_defconfig | 1 + arch/arm/configs/corgi_defconfig | 1 + arch/arm/configs/davinci_all_defconfig | 11 ---- arch/arm/configs/ep93xx_defconfig | 9 --- arch/arm/configs/eseries_pxa_defconfig | 1 + arch/arm/configs/ezx_defconfig | 1 + arch/arm/configs/footbridge_defconfig | 1 - arch/arm/configs/h5000_defconfig | 1 + arch/arm/configs/hackkit_defconfig | 1 + arch/arm/configs/iop32x_defconfig | 1 + arch/arm/configs/jornada720_defconfig | 1 + arch/arm/configs/lart_defconfig | 1 + arch/arm/configs/lpd270_defconfig | 1 + arch/arm/configs/lubbock_defconfig | 1 + arch/arm/configs/magician_defconfig | 1 + arch/arm/configs/mainstone_defconfig | 1 + arch/arm/configs/mini2440_defconfig | 1 + arch/arm/configs/mmp2_defconfig | 5 +- arch/arm/configs/multi_v5_defconfig | 17 ----- arch/arm/configs/mv78xx0_defconfig | 1 + arch/arm/configs/mvebu_v5_defconfig | 8 --- arch/arm/configs/omap1_defconfig | 9 --- arch/arm/configs/orion5x_defconfig | 13 ---- arch/arm/configs/palmz72_defconfig | 1 + arch/arm/configs/pcm027_defconfig | 1 + arch/arm/configs/pleb_defconfig | 1 + arch/arm/configs/pxa255-idp_defconfig | 1 + arch/arm/configs/pxa3xx_defconfig | 7 +-- arch/arm/configs/pxa_defconfig | 77 ++++------------------- arch/arm/configs/s3c2410_defconfig | 1 + arch/arm/configs/s3c6400_defconfig | 9 --- arch/arm/configs/shannon_defconfig | 1 + arch/arm/configs/simpad_defconfig | 1 + arch/arm/configs/tct_hammer_defconfig | 1 + arch/arm/configs/trizeps4_defconfig | 1 + arch/arm/configs/viper_defconfig | 1 + arch/arm/configs/xcep_defconfig | 1 + arch/arm/configs/zeus_defconfig | 1 + arch/arm/mach-cns3xxx/Kconfig | 1 + arch/arm/mach-davinci/Kconfig | 8 +++ arch/arm/mach-dove/Kconfig | 1 + arch/arm/mach-ep93xx/Kconfig | 10 +++ arch/arm/mach-footbridge/Kconfig | 1 + arch/arm/mach-iop32x/Kconfig | 1 + arch/arm/mach-mmp/Kconfig | 9 +++ arch/arm/mach-mv78xx0/Kconfig | 1 + arch/arm/mach-omap1/Kconfig | 11 ++++ arch/arm/mach-orion5x/Kconfig | 17 +++++ arch/arm/mach-pxa/Kconfig | 53 ++++++++++++++++ arch/arm/mach-s3c/Kconfig.s3c24xx | 2 +- arch/arm/mach-s3c/Kconfig.s3c64xx | 20 +++--- arch/arm/mach-sa1100/Kconfig | 11 ++++ 58 files changed, 199 insertions(+), 166 deletions(-)
Signature · 1 line
2.29.2
PATCH 1/13 ARM: add ATAGS dependencies to non-DT platforms
From: Arnd Bergmann <[email protected]>
There are a total of eight platforms that only suppor ATAGS based boot with board files but no devicetree booting.
For dove, the DT support is part of the mvebu platform, which shares driver but no code in arch/arm.
Most of these will never get converted to DT, and the majority of the board files appear to be entirely unused already. There are still known users on a few machines, and there may be interest in converting some omap1, ep93xx or footbridge machines over in the future.
For the moment, just add a Kconfig dependency to hide these platforms completely when CONFIG_ATAGS is disabled, and reorder the priority of the options: Rather than offering to turn ATAGS off for platforms that have DT support, make it a top-level setting that determines which platforms are visible.
The s3c24xx platform supports one machine with DT support, but it cannot be built without also including ATAGS support, and the entire platform is scheduled for removal, so leaving the entire platform behind a dependency seems good enough.
All defconfig files should keep working, as the option remains default enabled.
--- arch/arm/Kconfig | 5 ++++- arch/arm/mach-cns3xxx/Kconfig | 1 + arch/arm/mach-dove/Kconfig | 1 + arch/arm/mach-ep93xx/Kconfig | 1 + arch/arm/mach-iop32x/Kconfig | 1 + arch/arm/mach-mv78xx0/Kconfig | 1 + arch/arm/mach-omap1/Kconfig | 1 + arch/arm/mach-s3c/Kconfig.s3c24xx | 2 +- 8 files changed, 11 insertions(+), 2 deletions(-)
arch/arm/Kconfig +4 -1
@@ -350,6 +350,7 @@ config ARCH_MULTIPLATFORM config ARCH_FOOTBRIDGE bool "FootBridge" depends on CPU_LITTLE_ENDIAN + depends on ATAGS select CPU_SA110 select FOOTBRIDGE select NEED_MACH_MEMORY_H
@@ -361,6 +362,7 @@ config ARCH_RPC bool "RiscPC" depends on !CC_IS_CLANG && GCC_VERSION < 90100 && GCC_VERSION >= 60000 depends on CPU_LITTLE_ENDIAN + depends on ATAGS select ARCH_ACORN select ARCH_MAY_HAVE_PC_FDC select ARCH_SPARSEMEM_ENABLE
@@ -380,6 +382,7 @@ config ARCH_RPC config ARCH_SA1100 bool "SA1100-based" depends on CPU_LITTLE_ENDIAN + depends on ATAGS select ARCH_MTD_XIP select ARCH_SPARSEMEM_ENABLE select CLKSRC_MMIO
@@ -1539,7 +1542,7 @@ config USE_OF Include support for flattened device tree machine descriptions. config ATAGS - bool "Support for the traditional ATAGS boot data passing" if USE_OF + bool "Support for the traditional ATAGS boot data passing" default y help This is the traditional way of passing data to the kernel at boot
arch/arm/mach-cns3xxx/Kconfig +1 -0
@@ -2,6 +2,7 @@ menuconfig ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" depends on ARCH_MULTI_V6 + depends on ATAGS select ARM_GIC help Support for Cavium Networks CNS3XXX platform.
arch/arm/mach-dove/Kconfig +1 -0
@@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 menuconfig ARCH_DOVE bool "Marvell Dove" if ARCH_MULTI_V7 + depends on ATAGS select CPU_PJ4 select GPIOLIB select MVEBU_MBUS
arch/arm/mach-ep93xx/Kconfig +1 -0
@@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_EP93XX bool "EP93xx-based" + depends on ATAGS depends on ARCH_MULTI_V4T depends on CPU_LITTLE_ENDIAN select ARCH_SPARSEMEM_ENABLE
arch/arm/mach-iop32x/Kconfig +1 -0
@@ -3,6 +3,7 @@ menuconfig ARCH_IOP32X bool "IOP32x-based platforms" depends on ARCH_MULTI_V5 depends on CPU_LITTLE_ENDIAN + depends on ATAGS select CPU_XSCALE select GPIO_IOP select GPIOLIB
arch/arm/mach-mv78xx0/Kconfig +1 -0
@@ -3,6 +3,7 @@ menuconfig ARCH_MV78XX0 bool "Marvell MV78xx0" depends on ARCH_MULTI_V5 depends on CPU_LITTLE_ENDIAN + depends on ATAGS select CPU_FEROCEON select GPIOLIB select MVEBU_MBUS
arch/arm/mach-omap1/Kconfig +1 -0
@@ -3,6 +3,7 @@ menuconfig ARCH_OMAP1 bool "TI OMAP1" depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 depends on CPU_LITTLE_ENDIAN + depends on ATAGS select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_OMAP select CLKSRC_MMIO
arch/arm/mach-s3c/Kconfig.s3c24xx +1 -1
@@ -8,7 +8,7 @@ menuconfig ARCH_S3C24XX bool "Samsung S3C24XX SoCs (deprecated, see help)" depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 depends on CPU_LITTLE_ENDIAN - select ATAGS + depends on ATAGS select CLKSRC_SAMSUNG_PWM select GPIO_SAMSUNG select GPIOLIB
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 2/13 ARM: add CONFIG_UNUSED_BOARD_FILES
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
Based on the recent mailing list discussion, most board file support has no remaining users and can be scheduled for removal early next year.
If a board is still found to have users, it will remain for this round but users are encouraged to migrate to devicetree based booting where possible.
The timing is meant to ensure the next longterm supported kernel still contains all the board files, giving another year of support for potential users that did not speak up and would otherwise be stuck on the v5.15.y longterm kernel from 2021.
--- arch/arm/Kconfig | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
arch/arm/Kconfig +14 -2
@@ -1548,8 +1548,20 @@ config ATAGS This is the traditional way of passing data to the kernel at boot time. If you are solely relying on the flattened device tree (or the ARM_ATAG_DTB_COMPAT option) then you may unselect this option - to remove ATAGS support from your kernel binary. If unsure, - leave this to y. + to remove ATAGS support from your kernel binary. + +config UNUSED_BOARD_FILES + bool "Board support for machines without known users" + depends on ATAGS + help + Most ATAGS based board files are completely unused and are + scheduled for removal in early 2023, and left out of kernels + by default now. If you are using a board file that is marked + as unused, turn on this option to build support into the kernel. + + To keep support for your individual board from being removed, + send a reply to the email discussion at + https://lore.kernel.org/all/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/ config DEPRECATED_PARAM_STRUCT bool "Provide old way to pass kernel parameters"
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 3/13 ARM: pxa: add Kconfig dependencies for ATAGS based boards
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
Most of the traditional board files are no longer used by anyone and will be removed next year, while the DT based machine support remains.
Adding a CONFIG_ATAGS dependency around all the board files means that they now actaully get disabled when ATAGS support is left out, and the individual boards that have no known users are marked as depending on CONFIG_UNUSED_BOARD_FILES, with the plan to remove them in early 2023 unless someone else shows interest.
Laurence de Bruxelles intends to work on converting the Spitz/Akita/Borzoi family of Sharp Zaurus SL machines to DT, to make that easier those remain for the moment.
In addition, the "Gumstix" machine is the one that is supported in qemu with 256MB of RAM, which makes it particularly nice for testing, I'm leaving it in hoping that someone can take care of converting it to DT as well.
Finally, Marc Zyngier is still able to test the Zeus and Viper machines, so these could be saved as well if anyone wants to conver them to DT. This seems less likely, so I'm marking them as unused for the time being.
For the defconfig files, both the pxa3xx_defconfig and pxa_defconfig now only enable the boards that are not marked as unused, while all the other ones explicitly enable CONFIG_UNUSED_BOARD_FILES to still allow building the kernels.
--- arch/arm/configs/cm_x300_defconfig | 1 + arch/arm/configs/colibri_pxa270_defconfig | 1 + arch/arm/configs/colibri_pxa300_defconfig | 1 + arch/arm/configs/corgi_defconfig | 1 + arch/arm/configs/eseries_pxa_defconfig | 1 + arch/arm/configs/ezx_defconfig | 1 + arch/arm/configs/h5000_defconfig | 1 + arch/arm/configs/lpd270_defconfig | 1 + arch/arm/configs/lubbock_defconfig | 1 + arch/arm/configs/magician_defconfig | 1 + arch/arm/configs/mainstone_defconfig | 1 + arch/arm/configs/palmz72_defconfig | 1 + arch/arm/configs/pcm027_defconfig | 1 + arch/arm/configs/pxa255-idp_defconfig | 1 + arch/arm/configs/pxa3xx_defconfig | 7 +-- arch/arm/configs/pxa_defconfig | 77 ++++------------------- arch/arm/configs/trizeps4_defconfig | 1 + arch/arm/configs/viper_defconfig | 1 + arch/arm/configs/xcep_defconfig | 1 + arch/arm/configs/zeus_defconfig | 1 + arch/arm/mach-pxa/Kconfig | 53 ++++++++++++++++ 21 files changed, 83 insertions(+), 72 deletions(-)
arch/arm/configs/cm_x300_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_ARCH_PXA=y CONFIG_MACH_CM_X300=y CONFIG_AEABI=y CONFIG_HIGHMEM=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400" CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_USERSPACE=y
arch/arm/configs/colibri_pxa270_defconfig +1 -0
@@ -14,6 +14,7 @@ CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_ARCH_PXA=y CONFIG_MACH_COLIBRI=y CONFIG_AEABI=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y
arch/arm/configs/colibri_pxa300_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_ARCH_PXA=y CONFIG_MACH_COLIBRI300=y CONFIG_AEABI=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttyS0,115200 rw" CONFIG_CPU_IDLE=y CONFIG_FPE_NWFPE=y
arch/arm/configs/corgi_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_MACH_POODLE=y CONFIG_MACH_CORGI=y CONFIG_MACH_SHEPHERD=y CONFIG_MACH_HUSKY=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" CONFIG_FPE_NWFPE=y CONFIG_BINFMT_AOUT=m
arch/arm/configs/eseries_pxa_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_ARCH_PXA=y CONFIG_ARCH_PXA_ESERIES=y CONFIG_IWMMXT=y CONFIG_AEABI=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_KEXEC=y CONFIG_FPE_NWFPE=y CONFIG_MODULES=y
arch/arm/configs/ezx_defconfig +1 -0
@@ -15,6 +15,7 @@ CONFIG_EXPERT=y CONFIG_ARCH_PXA=y CONFIG_PXA_EZX=y CONFIG_AEABI=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug" CONFIG_KEXEC=y CONFIG_CPU_FREQ=y
arch/arm/configs/h5000_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_EXPERT=y CONFIG_ARCH_PXA=y CONFIG_MACH_H5000=y CONFIG_AEABI=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="keepinitrd" CONFIG_KEXEC=y CONFIG_FPE_NWFPE=y
arch/arm/configs/lpd270_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_LOGICPD_PXA270=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M" CONFIG_FPE_NWFPE=y CONFIG_MODULES=y
arch/arm/configs/lubbock_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_LUBBOCK=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M" CONFIG_FPE_NWFPE=y CONFIG_MODULES=y
arch/arm/configs/magician_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_ARCH_PXA=y CONFIG_MACH_H4700=y CONFIG_MACH_MAGICIAN=y CONFIG_AEABI=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="keepinitrd" CONFIG_KEXEC=y CONFIG_CPU_FREQ=y
arch/arm/configs/mainstone_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_MAINSTONE=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M" CONFIG_FPE_NWFPE=y CONFIG_MODULES=y
arch/arm/configs/palmz72_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_ARCH_PXA=y CONFIG_ARCH_PXA_PALM=y # CONFIG_MACH_PALMTX is not set CONFIG_AEABI=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="mem=32M console=tty root=/dev/mmcblk0" CONFIG_FPE_NWFPE=y CONFIG_PM=y
arch/arm/configs/pcm027_defconfig +1 -0
@@ -16,6 +16,7 @@ CONFIG_MACH_PCM027=y CONFIG_MACH_PCM990_BASEBOARD=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set +CONFIG_UNUSED_BOARD_FILES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y
arch/arm/configs/pxa255-idp_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_PXA_IDP=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="root=/dev/nfs ip=dhcp console=ttyS0,115200 mem=64M" CONFIG_FPE_NWFPE=y CONFIG_MODULES=y
arch/arm/configs/pxa3xx_defconfig +1 -6
@@ -7,9 +7,7 @@ CONFIG_KALLSYMS_ALL=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y -CONFIG_MACH_LITTLETON=y -CONFIG_MACH_TAVOREVB=y -CONFIG_MACH_SAAR=y +CONFIG_MACH_PXA3XX_DT=y CONFIG_AEABI=y CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug" CONFIG_FPE_NWFPE=y
@@ -43,8 +41,6 @@ CONFIG_SMC91X=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_PXA27x=y -CONFIG_KEYBOARD_PXA930_ROTARY=y -CONFIG_MOUSE_PXA930_TRKBALL=y CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_PXA=y
@@ -59,7 +55,6 @@ CONFIG_GPIO_MAX732X=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCF857X=y CONFIG_GPIO_MAX7301=y -CONFIG_POWER_SUPPLY=y CONFIG_POWER_SUPPLY_DEBUG=y CONFIG_PDA_POWER=y CONFIG_BATTERY_DA9030=y
arch/arm/configs/pxa_defconfig +11 -66
165 lines not on this page · raw message
arch/arm/configs/trizeps4_defconfig +1 -0
@@ -14,6 +14,7 @@ CONFIG_ARCH_PXA=y CONFIG_TRIZEPS_PXA=y CONFIG_MACH_TRIZEPS4=y CONFIG_AEABI=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="root=fe01 console=ttyS0,38400n8 loglevel=5" CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y
arch/arm/configs/viper_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_ARCH_PXA=y CONFIG_ARCH_VIPER=y CONFIG_IWMMXT=y CONFIG_AEABI=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200" CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m
arch/arm/configs/xcep_defconfig +1 -0
@@ -17,6 +17,7 @@ CONFIG_ARCH_PXA=y CONFIG_MACH_XCEP=y CONFIG_IWMMXT=y CONFIG_AEABI=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200" CONFIG_FPE_NWFPE=y CONFIG_KPROBES=y
arch/arm/configs/zeus_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_LOG_BUF_SHIFT=13 CONFIG_ARCH_PXA=y CONFIG_MACH_ARCOM_ZEUS=y CONFIG_AEABI=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200" CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m
arch/arm/mach-pxa/Kconfig +53 -0
326 lines not on this page · raw message
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 03/13] ARM: pxa: add Kconfig dependencies for ATAGS based boards
Quoted 16 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
Most of the traditional board files are no longer used by anyone and will be removed next year, while the DT based machine support remains.
Adding a
CONFIG_ATAGSdependency around all the board files means that they now actaully get disabled when ATAGS support is left out, and the individual boards that have no known users are marked as depending onCONFIG_UNUSED_BOARD_FILES, with the plan to remove them in early 2023 unless someone else shows interest.Laurence de Bruxelles intends to work on converting the Spitz/Akita/Borzoi family of Sharp Zaurus SL machines to DT, to make that easier those remain for the moment.
Quoted 8 lines
In addition, the "Gumstix" machine is the one that is supported in qemu with 256MB of RAM, which makes it particularly nice for testing, I'm leaving it in hoping that someone can take care of converting it to DT as well.
Finally, Marc Zyngier is still able to test the Zeus and Viper machines, so these could be saved as well if anyone wants to conver them to DT. This seems less likely, so I'm marking them as unused for the time being.
Note that although I have the machines (I do remember which side of the attic they are stored), I don't have much bandwidth to actually revive them (assuming I could remember the RedBoot runes to kick them into action).
I can only renew my offer to unload them on a willing victim, but I have the feeling that there are no takers.
Quoted 11 lines
For the defconfig files, both the
pxa3xx_defconfigandpxa_defconfignow only enable the boards that are not marked as unused, while all the other ones explicitly enableCONFIG_UNUSED_BOARD_FILESto still allow building the kernels.Cc Robert Jarzmik <[email protected]>Cc Daniel Mack <[email protected]>Cc Laurence de Bruxelles <[email protected]>Cc Marc Zyngier <[email protected]>Signed-off-by Arnd Bergmann <[email protected]>
M.
Signature · 6 lines
Without deviation from the norm, progress is not possible. _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 4/13 ARM: orion: add ATAGS dependencies
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
Most of the remaining arm board files in the kernel are unused and will be removed in early 2023 if no users step up. So far I got no user replies about the orion5x and mv78xx0 machines, but these are still supported in the default kernel of the Debian 'armel' (armv5 softfloat) distro, and there is an active project on github that tries to keep some of these machines working, and Mauri Sandberg is working on a DT conversion for the D-Link DNS-323.
It appears the Debian-on-Buffalo project has not got the Terastation WXL working in a few years, and the other mv78xx0 machines are just the reference designs, so I assume none of these have remaining users.
For the Orion5x family, the same is probably true for its reference implementations (RD88Fxxxxx, DB88F281) and the machines with less than 64MB of memory (WNR854T, WRT350N v2).
The remaining nine machines are now scheduled to be kept for at least 2023, hopefully to be replaced with DT based versions.
The mv78xx0_defconfig file needs to enable CONFIG_UNUSED_BOARD_FILES to still build, while the other affected defconfig files lose the specific boards.
--- arch/arm/configs/multi_v5_defconfig | 8 -------- arch/arm/configs/mv78xx0_defconfig | 1 + arch/arm/configs/mvebu_v5_defconfig | 8 -------- arch/arm/configs/orion5x_defconfig | 13 ------------- arch/arm/mach-mv78xx0/Kconfig | 2 +- arch/arm/mach-orion5x/Kconfig | 17 +++++++++++++++++ 6 files changed, 19 insertions(+), 30 deletions(-)
arch/arm/configs/multi_v5_defconfig +0 -8
@@ -31,8 +31,6 @@ CONFIG_MACH_KIRKWOOD=y CONFIG_ARCH_NPCM=y CONFIG_ARCH_WPCM450=y CONFIG_ARCH_ORION5X=y -CONFIG_MACH_DB88F5281=y -CONFIG_MACH_RD88F5182=y CONFIG_MACH_RD88F5182_DT=y CONFIG_MACH_KUROBOX_PRO=y CONFIG_MACH_DNS323=y
@@ -40,18 +38,12 @@ CONFIG_MACH_TS209=y CONFIG_MACH_TERASTATION_PRO2=y CONFIG_MACH_LINKSTATION_PRO=y CONFIG_MACH_LINKSTATION_MINI=y -CONFIG_MACH_LINKSTATION_LS_HGL=y CONFIG_MACH_TS409=y -CONFIG_MACH_WRT350N_V2=y CONFIG_MACH_TS78XX=y CONFIG_MACH_MV2120=y CONFIG_MACH_D2NET_DT=y CONFIG_MACH_NET2BIG=y CONFIG_MACH_MSS2_DT=y -CONFIG_MACH_WNR854T=y -CONFIG_MACH_RD88F5181L_GE=y -CONFIG_MACH_RD88F5181L_FXO=y -CONFIG_MACH_RD88F6183AP_GE=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_VERSATILE=y CONFIG_AEABI=y
arch/arm/configs/mv78xx0_defconfig +1 -0
@@ -17,6 +17,7 @@ CONFIG_MACH_TERASTATION_WXL=y CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_FPE_NWFPE=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_VFP=y CONFIG_KPROBES=y CONFIG_MODULES=y
arch/arm/configs/mvebu_v5_defconfig +0 -8
@@ -9,8 +9,6 @@ CONFIG_PROFILING=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_KIRKWOOD=y CONFIG_ARCH_ORION5X=y -CONFIG_MACH_DB88F5281=y -CONFIG_MACH_RD88F5182=y CONFIG_MACH_RD88F5182_DT=y CONFIG_MACH_KUROBOX_PRO=y CONFIG_MACH_DNS323=y
@@ -19,18 +17,12 @@ CONFIG_MACH_TERASTATION_PRO2=y CONFIG_MACH_LINKSTATION_PRO=y CONFIG_MACH_LINKSTATION_LSCHL=y CONFIG_MACH_LINKSTATION_MINI=y -CONFIG_MACH_LINKSTATION_LS_HGL=y CONFIG_MACH_TS409=y -CONFIG_MACH_WRT350N_V2=y CONFIG_MACH_TS78XX=y CONFIG_MACH_MV2120=y CONFIG_MACH_D2NET_DT=y CONFIG_MACH_NET2BIG=y CONFIG_MACH_MSS2_DT=y -CONFIG_MACH_WNR854T=y -CONFIG_MACH_RD88F5181L_GE=y -CONFIG_MACH_RD88F5181L_FXO=y -CONFIG_MACH_RD88F6183AP_GE=y CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_ARM_APPENDED_DTB=y
arch/arm/configs/orion5x_defconfig +0 -13
@@ -9,9 +9,6 @@ CONFIG_ARCH_MULTI_V5=y # CONFIG_ARCH_MULTI_V6 is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_ORION5X=y -CONFIG_ARCH_ORION5X_DT=y -CONFIG_MACH_DB88F5281=y -CONFIG_MACH_RD88F5182=y CONFIG_MACH_RD88F5182_DT=y CONFIG_MACH_KUROBOX_PRO=y CONFIG_MACH_DNS323=y
@@ -19,20 +16,10 @@ CONFIG_MACH_TS209=y CONFIG_MACH_TERASTATION_PRO2=y CONFIG_MACH_LINKSTATION_PRO=y CONFIG_MACH_LINKSTATION_MINI=y -CONFIG_MACH_LINKSTATION_LS_HGL=y CONFIG_MACH_TS409=y -CONFIG_MACH_WRT350N_V2=y CONFIG_MACH_TS78XX=y CONFIG_MACH_MV2120=y -CONFIG_MACH_EDMINI_V2_DT=y -CONFIG_MACH_D2NET=y -CONFIG_MACH_BIGDISK=y CONFIG_MACH_NET2BIG=y -CONFIG_MACH_MSS2=y -CONFIG_MACH_WNR854T=y -CONFIG_MACH_RD88F5181L_GE=y -CONFIG_MACH_RD88F5181L_FXO=y -CONFIG_MACH_RD88F6183AP_GE=y CONFIG_AEABI=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y
arch/arm/mach-mv78xx0/Kconfig +1 -1
@@ -3,7 +3,7 @@ menuconfig ARCH_MV78XX0 bool "Marvell MV78xx0" depends on ARCH_MULTI_V5 depends on CPU_LITTLE_ENDIAN - depends on ATAGS + depends on ATAGS && UNUSED_BOARD_FILES select CPU_FEROCEON select GPIOLIB select MVEBU_MBUS
arch/arm/mach-orion5x/Kconfig +17 -0
@@ -30,6 +30,7 @@ config ARCH_ORION5X_DT config MACH_DB88F5281 bool "Marvell Orion-2 Development Board" select I2C_BOARDINFO if I2C + depends on ATAGS && UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Marvell Orion-2 (88F5281) Development Board
@@ -37,6 +38,7 @@ config MACH_DB88F5281 config MACH_RD88F5182 bool "Marvell Orion-NAS Reference Design" select I2C_BOARDINFO if I2C + depends on ATAGS && UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Marvell Orion-NAS (88F5182) RD2
@@ -52,6 +54,7 @@ config MACH_RD88F5182_DT config MACH_KUROBOX_PRO bool "KuroBox Pro" select I2C_BOARDINFO if I2C + depends on ATAGS help Say 'Y' here if you want your kernel to support the KuroBox Pro platform.
@@ -59,24 +62,28 @@ config MACH_KUROBOX_PRO config MACH_DNS323 bool "D-Link DNS-323" select I2C_BOARDINFO if I2C + depends on ATAGS help Say 'Y' here if you want your kernel to support the D-Link DNS-323 platform. config MACH_TS209 bool "QNAP TS-109/TS-209" + depends on ATAGS help Say 'Y' here if you want your kernel to support the QNAP TS-109/TS-209 platform. config MACH_TERASTATION_PRO2 bool "Buffalo Terastation Pro II/Live" + depends on ATAGS help Say 'Y' here if you want your kernel to support the Buffalo Terastation Pro II/Live platform. config MACH_LINKSTATION_PRO bool "Buffalo Linkstation Pro/Live" + depends on ATAGS select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the
@@ -92,6 +99,7 @@ config MACH_LINKSTATION_MINI config MACH_LINKSTATION_LS_HGL bool "Buffalo Linkstation LS-HGL" + depends on ATAGS && UNUSED_BOARD_FILES select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the
@@ -99,24 +107,28 @@ config MACH_LINKSTATION_LS_HGL config MACH_TS409 bool "QNAP TS-409" + depends on ATAGS help Say 'Y' here if you want your kernel to support the QNAP TS-409 platform. config MACH_WRT350N_V2 bool "Linksys WRT350N v2" + depends on ATAGS && UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Linksys WRT350N v2 platform. config MACH_TS78XX bool "Technologic Systems TS-78xx" + depends on ATAGS help Say 'Y' here if you want your kernel to support the Technologic Systems TS-78xx platform. config MACH_MV2120 bool "HP Media Vault mv2120" + depends on ATAGS help Say 'Y' here if you want your kernel to support the HP Media Vault mv2120 or mv5100.
@@ -130,6 +142,7 @@ config MACH_D2NET_DT config MACH_NET2BIG bool "LaCie 2Big Network" + depends on ATAGS select I2C_BOARDINFO if I2C help Say 'Y' here if you want your kernel to support the
@@ -144,24 +157,28 @@ config MACH_MSS2_DT config MACH_WNR854T bool "Netgear WNR854T" + depends on ATAGS && UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Netgear WNR854T platform. config MACH_RD88F5181L_GE bool "Marvell Orion-VoIP GE Reference Design" + depends on ATAGS && UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Marvell Orion-VoIP GE (88F5181L) RD. config MACH_RD88F5181L_FXO bool "Marvell Orion-VoIP FXO Reference Design" + depends on ATAGS && UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Marvell Orion-VoIP FXO (88F5181L) RD. config MACH_RD88F6183AP_GE bool "Marvell Orion-1-90 AP GE Reference Design" + depends on ATAGS && UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Marvell Orion-1-90 (88F6183) AP GE RD.
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 5/13 ARM: davinci: mark all ATAGS board files as unused
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
From an earlier discussion, it appears that the davinci da8xx machines that are still functional have already been converted to DT, while the remaining board files are only kept because nobody has stepped up to remove them.
Mark all these boards as 'depends on UNUSED_BOARD_FILES' with the plan to remove them in early 2023 after the next longterm supported kernel is out.
--- arch/arm/configs/davinci_all_defconfig | 11 ----------- arch/arm/configs/multi_v5_defconfig | 9 --------- arch/arm/mach-davinci/Kconfig | 8 ++++++++ 3 files changed, 8 insertions(+), 20 deletions(-)
arch/arm/configs/davinci_all_defconfig +0 -11
@@ -14,17 +14,8 @@ CONFIG_ARCH_MULTIPLATFORM=y CONFIG_ARCH_MULTI_V5=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_DAVINCI=y -CONFIG_ARCH_DAVINCI_DM644x=y -CONFIG_ARCH_DAVINCI_DM355=y -CONFIG_ARCH_DAVINCI_DM646x=y CONFIG_ARCH_DAVINCI_DA830=y CONFIG_ARCH_DAVINCI_DA850=y -CONFIG_ARCH_DAVINCI_DM365=y -CONFIG_MACH_SFFSDR=y -CONFIG_MACH_NEUROS_OSD2=y -CONFIG_MACH_DM355_LEOPARD=y -CONFIG_MACH_MITYOMAPL138=y -CONFIG_MACH_OMAPL138_HAWKBOARD=y CONFIG_DAVINCI_MUX_DEBUG=y CONFIG_DAVINCI_MUX_WARNINGS=y CONFIG_AEABI=y
@@ -110,7 +101,6 @@ CONFIG_KEYBOARD_XTKBD=m CONFIG_INPUT_TOUCHSCREEN=y CONFIG_INPUT_MISC=y CONFIG_INPUT_PWM_BEEPER=m -CONFIG_INPUT_DM355EVM=m CONFIG_SERIO_LIBPS2=y # CONFIG_VT_CONSOLE is not set CONFIG_SERIAL_8250=y
@@ -138,7 +128,6 @@ CONFIG_SYSCON_REBOOT_MODE=m CONFIG_BATTERY_LEGO_EV3=m CONFIG_WATCHDOG=y CONFIG_DAVINCI_WATCHDOG=y -CONFIG_MFD_DM355EVM_MSP=y CONFIG_TPS6507X=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y
arch/arm/configs/multi_v5_defconfig +0 -9
@@ -12,17 +12,8 @@ CONFIG_MACH_ASPEED_G4=y CONFIG_ARCH_AT91=y CONFIG_SOC_AT91SAM9=y CONFIG_ARCH_DAVINCI=y -CONFIG_ARCH_DAVINCI_DM644x=y -CONFIG_ARCH_DAVINCI_DM355=y -CONFIG_ARCH_DAVINCI_DM646x=y CONFIG_ARCH_DAVINCI_DA830=y CONFIG_ARCH_DAVINCI_DA850=y -CONFIG_ARCH_DAVINCI_DM365=y -CONFIG_MACH_SFFSDR=y -CONFIG_MACH_NEUROS_OSD2=y -CONFIG_MACH_DM355_LEOPARD=y -CONFIG_MACH_MITYOMAPL138=y -CONFIG_MACH_OMAPL138_HAWKBOARD=y CONFIG_ARCH_MXC=y CONFIG_SOC_IMX25=y CONFIG_SOC_IMX27=y
arch/arm/mach-davinci/Kconfig +8 -0
@@ -26,6 +26,7 @@ config ARCH_DAVINCI_DM644x config ARCH_DAVINCI_DM355 bool "DaVinci 355 based system" + depends on ATAGS && UNUSED_BOARD_FILES select DAVINCI_AINTC select ARCH_DAVINCI_DMx
@@ -37,6 +38,7 @@ config ARCH_DAVINCI_DM646x config ARCH_DAVINCI_DA830 bool "DA830/OMAP-L137/AM17x based system" depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) + depends on ATAGS select ARCH_DAVINCI_DA8XX # needed on silicon revs 1.0, 1.1: select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
@@ -45,6 +47,7 @@ config ARCH_DAVINCI_DA830 config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) + depends on ATAGS select ARCH_DAVINCI_DA8XX select DAVINCI_CP_INTC
@@ -53,6 +56,7 @@ config ARCH_DAVINCI_DA8XX config ARCH_DAVINCI_DM365 bool "DaVinci 365 based system" + depends on ATAGS && UNUSED_BOARD_FILES select DAVINCI_AINTC select ARCH_DAVINCI_DMx
@@ -127,6 +131,7 @@ config MACH_DAVINCI_DM365_EVM config MACH_DAVINCI_DA830_EVM bool "TI DA830/OMAP-L137/AM17x Reference Platform" default ARCH_DAVINCI_DA830 + depends on ATAGS && UNUSED_BOARD_FILES depends on ARCH_DAVINCI_DA830 select GPIO_PCF857X if I2C help
@@ -156,6 +161,7 @@ endchoice config MACH_DAVINCI_DA850_EVM bool "TI DA850/OMAP-L138/AM18x Reference Platform" + depends on ATAGS && UNUSED_BOARD_FILES default ARCH_DAVINCI_DA850 depends on ARCH_DAVINCI_DA850 help
@@ -197,6 +203,7 @@ endchoice config MACH_MITYOMAPL138 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" depends on ARCH_DAVINCI_DA850 + depends on ATAGS && UNUSED_BOARD_FILES help Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 System on Module. Information on this SoM may be found at
@@ -205,6 +212,7 @@ config MACH_MITYOMAPL138 config MACH_OMAPL138_HAWKBOARD bool "TI AM1808 / OMAPL-138 Hawkboard platform" depends on ARCH_DAVINCI_DA850 + depends on ATAGS && UNUSED_BOARD_FILES help Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 05/13] ARM: davinci: mark all ATAGS board files as unused
Quoted 150 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
From an earlier discussion, it appears that the davinci da8xx machines that are still functional have already been converted to DT, while the remaining board files are only kept because nobody has stepped up to remove them.
Mark all these boards as 'depends on
UNUSED_BOARD_FILES' with the plan to remove them in early 2023 after the next longterm supported kernel is out.Cc Sekhar Nori <[email protected]>Cc Bartosz Golaszewski <[email protected]>Signed-off-by Arnd Bergmann <[email protected]>--- arch/arm/configs/davinci_all_defconfig | 11 ----------- arch/arm/configs/multi_v5_defconfig | 9 --------- arch/arm/mach-davinci/Kconfig | 8 ++++++++ 3 files changed, 8 insertions(+), 20 deletions(-)arch/arm/configs/davinci_all_defconfig +0
-11@@ -14,17 +14,8 @@ CONFIG_ARCH_MULTIPLATFORM=y CONFIG_ARCH_MULTI_V5=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_DAVINCI=y -CONFIG_ARCH_DAVINCI_DM644x=y -CONFIG_ARCH_DAVINCI_DM355=y -CONFIG_ARCH_DAVINCI_DM646x=y CONFIG_ARCH_DAVINCI_DA830=y CONFIG_ARCH_DAVINCI_DA850=y -CONFIG_ARCH_DAVINCI_DM365=y -CONFIG_MACH_SFFSDR=y -CONFIG_MACH_NEUROS_OSD2=y -CONFIG_MACH_DM355_LEOPARD=y -CONFIG_MACH_MITYOMAPL138=y -CONFIG_MACH_OMAPL138_HAWKBOARD=y CONFIG_DAVINCI_MUX_DEBUG=y CONFIG_DAVINCI_MUX_WARNINGS=y CONFIG_AEABI=y@@ -110,7 +101,6 @@ CONFIG_KEYBOARD_XTKBD=m CONFIG_INPUT_TOUCHSCREEN=y CONFIG_INPUT_MISC=y CONFIG_INPUT_PWM_BEEPER=m -CONFIG_INPUT_DM355EVM=m CONFIG_SERIO_LIBPS2=y # CONFIG_VT_CONSOLE is not set CONFIG_SERIAL_8250=y@@ -138,7 +128,6 @@ CONFIG_SYSCON_REBOOT_MODE=m CONFIG_BATTERY_LEGO_EV3=m CONFIG_WATCHDOG=y CONFIG_DAVINCI_WATCHDOG=y -CONFIG_MFD_DM355EVM_MSP=y CONFIG_TPS6507X=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=yarch/arm/configs/multi_v5_defconfig +0
-9@@ -12,17 +12,8 @@ CONFIG_MACH_ASPEED_G4=y CONFIG_ARCH_AT91=y CONFIG_SOC_AT91SAM9=y CONFIG_ARCH_DAVINCI=y -CONFIG_ARCH_DAVINCI_DM644x=y -CONFIG_ARCH_DAVINCI_DM355=y -CONFIG_ARCH_DAVINCI_DM646x=y CONFIG_ARCH_DAVINCI_DA830=y CONFIG_ARCH_DAVINCI_DA850=y -CONFIG_ARCH_DAVINCI_DM365=y -CONFIG_MACH_SFFSDR=y -CONFIG_MACH_NEUROS_OSD2=y -CONFIG_MACH_DM355_LEOPARD=y -CONFIG_MACH_MITYOMAPL138=y -CONFIG_MACH_OMAPL138_HAWKBOARD=y CONFIG_ARCH_MXC=y CONFIG_SOC_IMX25=y CONFIG_SOC_IMX27=yarch/arm/mach-davinci/Kconfig +8
-1@@ -26,6 +26,7 @@ config ARCH_DAVINCI_DM644x config ARCH_DAVINCI_DM355 bool "DaVinci 355 based system" + depends on ATAGS && UNUSED_BOARD_FILES select DAVINCI_AINTC select ARCH_DAVINCI_DMx@@ -37,6 +38,7 @@ config ARCH_DAVINCI_DM646x config ARCH_DAVINCI_DA830 bool "DA830/OMAP-L137/AM17x based system" depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) + depends on ATAGS select ARCH_DAVINCI_DA8XX # needed on silicon revs 1.0, 1.1: select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE@@ -45,6 +47,7 @@ config ARCH_DAVINCI_DA830 config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) + depends on ATAGS select ARCH_DAVINCI_DA8XX select DAVINCI_CP_INTC@@ -53,6 +56,7 @@ config ARCH_DAVINCI_DA8XX config ARCH_DAVINCI_DM365 bool "DaVinci 365 based system" + depends on ATAGS && UNUSED_BOARD_FILES select DAVINCI_AINTC select ARCH_DAVINCI_DMx@@ -127,6 +131,7 @@ config MACH_DAVINCI_DM365_EVM config MACH_DAVINCI_DA830_EVM bool "TI DA830/OMAP-L137/AM17x Reference Platform" default ARCH_DAVINCI_DA830 + depends on ATAGS && UNUSED_BOARD_FILES depends on ARCH_DAVINCI_DA830 select GPIO_PCF857X if I2C help@@ -156,6 +161,7 @@ endchoice config MACH_DAVINCI_DA850_EVM bool "TI DA850/OMAP-L138/AM18x Reference Platform" + depends on ATAGS && UNUSED_BOARD_FILES default ARCH_DAVINCI_DA850 depends on ARCH_DAVINCI_DA850 help@@ -197,6 +203,7 @@ endchoice config MACH_MITYOMAPL138 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" depends on ARCH_DAVINCI_DA850 + depends on ATAGS && UNUSED_BOARD_FILES help Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 System on Module. Information on this SoM may be found at@@ -205,6 +212,7 @@ config MACH_MITYOMAPL138 config MACH_OMAPL138_HAWKBOARD bool "TI AM1808 / OMAPL-138 Hawkboard platform" depends on ARCH_DAVINCI_DA850 + depends on ATAGS && UNUSED_BOARD_FILES help Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform . --
Quoted 2 lines
2.29.2
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 6/13 ARM: ep93xx: mark most board files as unused
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
Most of the remaining ARM board files in the kernel have no known users, and we plan to remove those in early 2023.
For ep93xx, Alexander Sverdlin still has access to the edb93xx family of reference boards, while Nikita Shubin has a ts7250 and is working on a device tree conversion for those.
This is a total of nine machine definitions that we will keep around, but these are all similar machines and are defined in only two board files. The other six board files now have a dependency on CONFIG_UNUSED_BOARD_FILES to indicate that they are likely going away.
--- arch/arm/configs/ep93xx_defconfig | 9 --------- arch/arm/mach-ep93xx/Kconfig | 9 +++++++++ 2 files changed, 9 insertions(+), 9 deletions(-)
arch/arm/configs/ep93xx_defconfig +0 -9
@@ -8,7 +8,6 @@ CONFIG_EXPERT=y CONFIG_ARCH_MULTI_V4T=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_EP93XX=y -CONFIG_MACH_ADSSPHERE=y CONFIG_MACH_EDB9301=y CONFIG_MACH_EDB9302=y CONFIG_MACH_EDB9302A=y
@@ -17,15 +16,7 @@ CONFIG_MACH_EDB9307A=y CONFIG_MACH_EDB9312=y CONFIG_MACH_EDB9315=y CONFIG_MACH_EDB9315A=y -CONFIG_MACH_GESBC9312=y -CONFIG_MACH_MICRO9H=y -CONFIG_MACH_MICRO9M=y -CONFIG_MACH_MICRO9L=y -CONFIG_MACH_MICRO9S=y -CONFIG_MACH_SIM_ONE=y -CONFIG_MACH_SNAPPER_CL15=y CONFIG_MACH_TS72XX=y -CONFIG_MACH_VISION_EP9307=y CONFIG_AEABI=y CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp" CONFIG_MODULES=y
arch/arm/mach-ep93xx/Kconfig +9 -0
@@ -27,6 +27,7 @@ comment "EP93xx Platforms" config MACH_ADSSPHERE bool "Support ADS Sphere" + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the ADS Sphere board.
@@ -99,6 +100,7 @@ config MACH_EDB9315A config MACH_GESBC9312 bool "Support Glomation GESBC-9312-sx" + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Glomation GESBC-9312-sx board.
@@ -109,6 +111,7 @@ config MACH_MICRO9 config MACH_MICRO9H bool "Support Contec Micro9-High" select MACH_MICRO9 + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Contec Micro9-High board.
@@ -116,6 +119,7 @@ config MACH_MICRO9H config MACH_MICRO9M bool "Support Contec Micro9-Mid" select MACH_MICRO9 + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Contec Micro9-Mid board.
@@ -123,6 +127,7 @@ config MACH_MICRO9M config MACH_MICRO9L bool "Support Contec Micro9-Lite" select MACH_MICRO9 + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Contec Micro9-Lite board.
@@ -130,18 +135,21 @@ config MACH_MICRO9L config MACH_MICRO9S bool "Support Contec Micro9-Slim" select MACH_MICRO9 + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Contec Micro9-Slim board. config MACH_SIM_ONE bool "Support Simplemachines Sim.One board" + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Simplemachines Sim.One board. config MACH_SNAPPER_CL15 bool "Support Bluewater Systems Snapper CL15 Module" + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Bluewater Systems Snapper CL15 Module.
@@ -154,6 +162,7 @@ config MACH_TS72XX config MACH_VISION_EP9307 bool "Support Vision Engraving Systems EP9307 SoM" + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Vision Engraving Systems EP9307 SoM.
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 06/13] ARM: ep93xx: mark most board files as unused
Hi Arnd!
Quoted 12 lines · Arnd Bergmann
Most of the remaining ARM board files in the kernel have no known users, and we plan to remove those in early 2023.
For ep93xx, Alexander Sverdlin still has access to the edb93xx family of reference boards, while Nikita Shubin has a ts7250 and is working on a device tree conversion for those.
This is a total of nine machine definitions that we will keep around, but these are all similar machines and are defined in only two board files. The other six board files now have a dependency on
CONFIG_UNUSED_BOARD_FILESto indicate that they are likely going away.
Quoted 5 lines
Cc Nikita Shubin <[email protected]>Cc Alexander Sverdlin <[email protected]>Cc Hartley Sweeten <[email protected]>Cc Lukasz Majewski <[email protected]>Signed-off-by Arnd Bergmann <[email protected]>
Quoted 107 lines
---
arch/arm/configs/ep93xx_defconfig | 9 ---------
arch/arm/mach-ep93xx/Kconfig | 9 +++++++++2 files changed, 9 insertions(+), 9 deletions(-)arch/arm/configs/ep93xx_defconfig +0
-0@@ -8,7 +8,6 @@ CONFIG_EXPERT=yCONFIG_ARCH_MULTI_V4T=y
#CONFIG_ARCH_MULTI_V7is not set
CONFIG_ARCH_EP93XX=y
-CONFIG_MACH_ADSSPHERE=y
CONFIG_MACH_EDB9301=y
CONFIG_MACH_EDB9302=y
CONFIG_MACH_EDB9302A=yarch/arm/configs/ep93xx_defconfig +0
-0@@ -17,15 +16,7 @@ CONFIG_MACH_EDB9307A=yCONFIG_MACH_EDB9312=y
CONFIG_MACH_EDB9315=y
CONFIG_MACH_EDB9315A=yarch/arm/configs/ep93xx_defconfig +0
-7-CONFIG_MACH_GESBC9312=y -CONFIG_MACH_MICRO9H=y -CONFIG_MACH_MICRO9M=y -CONFIG_MACH_MICRO9L=y -CONFIG_MACH_MICRO9S=y -CONFIG_MACH_SIM_ONE=y -CONFIG_MACH_SNAPPER_CL15=yCONFIG_MACH_TS72XX=y
-CONFIG_MACH_VISION_EP9307=y
CONFIG_AEABI=yCONFIG_CMDLINE="console=ttyAM0,115200root=/dev/nfs ip=bootp"CONFIG_MODULES=yarch/arm/mach-ep93xx/Kconfig +0
-0@@ -27,6 +27,7 @@ comment "EP93xx Platforms"
configMACH_ADSSPHERE
bool "Support ADS Sphere"
+ depends onUNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the ADS Sphere board.arch/arm/mach-ep93xx/Kconfig +0
-0@@ -99,6 +100,7 @@ config MACH_EDB9315A
configMACH_GESBC9312
bool "Support Glomation GESBC-9312-sx"
+ depends onUNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the Glomation GESBC-9312-sx board.arch/arm/mach-ep93xx/Kconfig +0
-0@@ -109,6 +111,7 @@ config MACH_MICRO9config
MACH_MICRO9H
bool "Support Contec Micro9-High"
selectMACH_MICRO9
+ depends onUNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the Contec Micro9-High board.arch/arm/mach-ep93xx/Kconfig +0
-0@@ -116,6 +119,7 @@ config MACH_MICRO9Hconfig
MACH_MICRO9M
bool "Support Contec Micro9-Mid"
selectMACH_MICRO9
+ depends onUNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the Contec Micro9-Mid board.arch/arm/mach-ep93xx/Kconfig +0
-0@@ -123,6 +127,7 @@ config MACH_MICRO9Mconfig
MACH_MICRO9L
bool "Support Contec Micro9-Lite"
selectMACH_MICRO9
+ depends onUNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the Contec Micro9-Lite board.arch/arm/mach-ep93xx/Kconfig +0
-0@@ -130,18 +135,21 @@ config MACH_MICRO9Lconfig
MACH_MICRO9S
bool "Support Contec Micro9-Slim"
selectMACH_MICRO9
+ depends onUNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the Contec Micro9-Slim board.
configMACH_SIM_ONE
bool "Support Simplemachines Sim.One board"
+ depends onUNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the Simplemachines Sim.One board.
configMACH_SNAPPER_CL15
bool "Support Bluewater Systems Snapper CL15 Module" + depends onUNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the Bluewater Systems Snapper CL15 Module.arch/arm/mach-ep93xx/Kconfig +0
-0@@ -154,6 +162,7 @@ config MACH_TS72XX
configMACH_VISION_EP9307
bool "Support Vision Engraving Systems EP9307 SoM" + depends onUNUSED_BOARD_FILES
help
Say 'Y' here if you want your kernel to support the Vision Engraving Systems EP9307 SoM.
Signature · 7 lines
Alexander Sverdlin. _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hartley Sweeten
Acked-by Alexander SverdlinRE: [PATCH 06/13] ARM: ep93xx: mark most board files as unused
Hello,
I still have some Vision EP9302 boards that I use.
Hartley
-----Original Message-----
From: Alexander Sverdlin <[email protected]>
Sent: Thursday, July 21, 2022 7:30 AM
To: Arnd Bergmann <[email protected]>; [email protected]
Cc: Arnd Bergmann <[email protected]>; Nikita Shubin <[email protected]>; Hartley Sweeten <[email protected]>; Lukasz Majewski <[email protected]>
Subject: Re: [PATCH 06/13] ARM: ep93xx: mark most board files as unused
Hi Arnd!
Quoted 12 lines · Arnd Bergmann
Most of the remaining ARM board files in the kernel have no known users, and we plan to remove those in early 2023.
For ep93xx, Alexander Sverdlin still has access to the edb93xx family of reference boards, while Nikita Shubin has a ts7250 and is working on a device tree conversion for those.
This is a total of nine machine definitions that we will keep around, but these are all similar machines and are defined in only two board files. The other six board files now have a dependency on
CONFIG_UNUSED_BOARD_FILESto indicate that they are likely going away.
Quoted 5 lines
Cc Nikita Shubin <[email protected]>Cc Alexander Sverdlin <[email protected]>Cc Hartley Sweeten <[email protected]>Cc Lukasz Majewski <[email protected]>Signed-off-by Arnd Bergmann <[email protected]>
Quoted 89 lines
--- arch/arm/configs/ep93xx_defconfig | 9 --------- arch/arm/mach-ep93xx/Kconfig | 9 +++++++++ 2 files changed, 9 insertions(+), 9 deletions(-)arch/arm/configs/ep93xx_defconfig +0
-1@@ -8,7 +8,6 @@ CONFIG_EXPERT=y CONFIG_ARCH_MULTI_V4T=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_EP93XX=y -CONFIG_MACH_ADSSPHERE=y CONFIG_MACH_EDB9301=y CONFIG_MACH_EDB9302=y CONFIG_MACH_EDB9302A=y@@ -17,15 +16,7 @@ CONFIG_MACH_EDB9307A=y CONFIG_MACH_EDB9312=y
CONFIG_MACH_EDB9315=yCONFIG_MACH_EDB9315A=y-CONFIG_MACH_GESBC9312=yarch/arm/configs/ep93xx_defconfig +0
-4-CONFIG_MACH_MICRO9H=y -CONFIG_MACH_MICRO9M=y -CONFIG_MACH_MICRO9L=y -CONFIG_MACH_MICRO9S=y -CONFIG_MACH_SIM_ONE=y -CONFIG_MACH_SNAPPER_CL15=y CONFIG_MACH_TS72XX=y -CONFIG_MACH_VISION_EP9307=y CONFIG_AEABI=y CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp" CONFIG_MODULES=y(quoted diff) +0
-0b/arch/arm/mach-ep93xx/Kconfig index
ecac8b487dae..f96d14073b91100644arch/arm/mach-ep93xx/Kconfig +8
-0@@ -27,6 +27,7 @@ comment "EP93xx Platforms" config MACH_ADSSPHERE bool "Support ADS Sphere" + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the ADS Sphere board.@@ -99,6 +100,7 @@ config MACH_EDB9315A config MACH_GESBC9312 bool "Support Glomation GESBC-9312-sx" + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Glomation GESBC-9312-sx board.@@ -109,6 +111,7 @@ config MACH_MICRO9 config MACH_MICRO9H bool "Support Contec Micro9-High" select MACH_MICRO9 + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Contec Micro9-High board.@@ -116,6 +119,7 @@ config MACH_MICRO9H config MACH_MICRO9M bool "Support Contec Micro9-Mid" select MACH_MICRO9 + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Contec Micro9-Mid board.@@ -123,6 +127,7 @@ config MACH_MICRO9M config MACH_MICRO9L bool "Support Contec Micro9-Lite" select MACH_MICRO9 + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Contec Micro9-Lite board.@@ -130,18 +135,21 @@ config MACH_MICRO9L config MACH_MICRO9S bool "Support Contec Micro9-Slim" select MACH_MICRO9 + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Contec Micro9-Slim board. config MACH_SIM_ONE bool "Support Simplemachines Sim.One board" + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Simplemachines Sim.One board. config MACH_SNAPPER_CL15 bool "Support Bluewater Systems Snapper CL15 Module" + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Bluewater Systems Snapper CL15 Module.
arch/arm/mach-ep93xx/Kconfig config MACH_TS72XX · line 168
Quoted 7 lines
arch/arm/mach-ep93xx/Kconfig +1
-0@@ -154,6 +162,7 @@ config MACH_TS72XX config MACH_VISION_EP9307 bool "Support Vision Engraving Systems EP9307 SoM" + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Vision Engraving Systems EP9307 SoM.
--
Alexander Sverdlin.
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Alexander Sverdlin
maintainerRe: [PATCH 06/13] ARM: ep93xx: mark most board files as unused
Hi Hartley!
Quoted 1 line · Hartley Sweeten
I still have some Vision EP9302 boards that I use.
Which Kconfig entry is it?
Is it MACH_VISION_EP9307 or MACH_EDB9302?
Signature · 7 lines
Alexander Sverdlin. _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
RE: [PATCH 06/13] ARM: ep93xx: mark most board files as unused
Alexander,
MACH_VISION_EP9307
I also have a EDB9302 eval boad, a Sim.One board and a Contec Micro9 board. But I have not powered those on for quite a while. They did work last time I used them.
MACH_SIM_ONEMACH_MICRO9
Hartley
-----Original Message-----
From: Alexander Sverdlin <[email protected]>
Sent: Thursday, July 21, 2022 9:01 AM
To: Hartley Sweeten <[email protected]>; Arnd Bergmann <[email protected]>; [email protected]
Cc: Arnd Bergmann <[email protected]>; Nikita Shubin <[email protected]>; Lukasz Majewski <[email protected]>
Subject: Re: [PATCH 06/13] ARM: ep93xx: mark most board files as unused
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Hi Hartley!
Quoted 1 line · Hartley Sweeten
I still have some Vision EP9302 boards that I use.
Which Kconfig entry is it?
Is it MACH_VISION_EP9307 or MACH_EDB9302?
--
Alexander Sverdlin.
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 06/13] ARM: ep93xx: mark most board files as unused
Quoted 4 lines · Hartley Sweeten
Alexander,
MACH_VISION_EP9307
Ok, marked as still in use.
Quoted 5 lines
I also have a EDB9302 eval boad, a Sim.One board and a Contec Micro9 board. But I have not powered those on for quite a while. They did work last time I used them.
MACH_SIM_ONEMACH_MICRO9
That sounds to me like it fits in the 'unused' category, so I left it marked that way.
Let me know if you think we should keep them for now.
Also, do you have any additional thoughts on longterm viability of ep93xx, especially
plans for how long Vision EP9302 kernel updates will get distributed to users, and
whether it makes sense to convert it to DT?
Arnd
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 06/13] ARM: ep93xx: mark most board files as unused
In reply to Arnd BergmannHi Arnd,
Quoted 8 lines
From: Arnd Bergmann <[email protected]>
Most of the remaining ARM board files in the kernel have no known users, and we plan to remove those in early 2023.
For ep93xx, Alexander Sverdlin still has access to the edb93xx family of reference boards, while Nikita Shubin has a ts7250 and is working on a device tree conversion for those.
I do know about one actively used TS7250 based board. It is going to be still used for some time. However, I don't have the HW with me, but may be available when the BSP will be refurbished.
Quoted 111 lines
This is a total of nine machine definitions that we will keep around, but these are all similar machines and are defined in only two board files. The other six board files now have a dependency on
CONFIG_UNUSED_BOARD_FILESto indicate that they are likely going away.Cc Nikita Shubin <[email protected]>Cc Alexander Sverdlin <[email protected]>Cc Hartley Sweeten <[email protected]>Cc Lukasz Majewski <[email protected]>Signed-off-by Arnd Bergmann <[email protected]>--- arch/arm/configs/ep93xx_defconfig | 9 --------- arch/arm/mach-ep93xx/Kconfig | 9 +++++++++ 2 files changed, 9 insertions(+), 9 deletions(-)(quoted diff) +0
-0b/arch/arm/configs/ep93xx_defconfig index
dd390f3b19d2..afa4f789da1f100644 --- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfigarch/arm/configs/ep93xx_defconfig +0
-9@@ -8,7 +8,6 @@ CONFIG_EXPERT=y CONFIG_ARCH_MULTI_V4T=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_EP93XX=y -CONFIG_MACH_ADSSPHERE=y CONFIG_MACH_EDB9301=y CONFIG_MACH_EDB9302=y CONFIG_MACH_EDB9302A=y@@ -17,15 +16,7 @@ CONFIG_MACH_EDB9307A=y CONFIG_MACH_EDB9312=y CONFIG_MACH_EDB9315=y CONFIG_MACH_EDB9315A=y -CONFIG_MACH_GESBC9312=y -CONFIG_MACH_MICRO9H=y -CONFIG_MACH_MICRO9M=y -CONFIG_MACH_MICRO9L=y -CONFIG_MACH_MICRO9S=y -CONFIG_MACH_SIM_ONE=y -CONFIG_MACH_SNAPPER_CL15=y CONFIG_MACH_TS72XX=y -CONFIG_MACH_VISION_EP9307=y CONFIG_AEABI=y CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp" CONFIG_MODULES=y(quoted diff) +0
-0b/arch/arm/mach-ep93xx/Kconfig index
ecac8b487dae..f96d14073b91100644arch/arm/mach-ep93xx/Kconfig +2
-0@@ -27,6 +27,7 @@ comment "EP93xx Platforms" config MACH_ADSSPHERE bool "Support ADS Sphere" + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the ADS Sphere board.@@ -99,6 +100,7 @@ config MACH_EDB9315A config MACH_GESBC9312 bool "Support Glomation GESBC-9312-sx" + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support theGlomation GESBC-9312-sx board.
arch/arm/mach-ep93xx/Kconfig +6
-0@@ -109,6 +111,7 @@ config MACH_MICRO9 config MACH_MICRO9H bool "Support Contec Micro9-High" select MACH_MICRO9 + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Contec Micro9-High board.@@ -116,6 +119,7 @@ config MACH_MICRO9H config MACH_MICRO9M bool "Support Contec Micro9-Mid" select MACH_MICRO9 + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Contec Micro9-Mid board.@@ -123,6 +127,7 @@ config MACH_MICRO9M config MACH_MICRO9L bool "Support Contec Micro9-Lite" select MACH_MICRO9 + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Contec Micro9-Lite board.@@ -130,18 +135,21 @@ config MACH_MICRO9L config MACH_MICRO9S bool "Support Contec Micro9-Slim" select MACH_MICRO9 + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Contec Micro9-Slim board. config MACH_SIM_ONE bool "Support Simplemachines Sim.One board" + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Simplemachines Sim.One board. config MACH_SNAPPER_CL15 bool "Support Bluewater Systems Snapper CL15 Module" + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support theBluewater Systems Snapper CL15 Module.
arch/arm/mach-ep93xx/Kconfig config MACH_TS72XX · line 168
Quoted 7 lines
arch/arm/mach-ep93xx/Kconfig +1
-0@@ -154,6 +162,7 @@ config MACH_TS72XX config MACH_VISION_EP9307 bool "Support Vision Engraving Systems EP9307 SoM" + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Vision Engraving Systems EP9307 SoM.
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: [email protected]
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 06/13] ARM: ep93xx: mark most board files as unused
Quoted 5 lines · Lukasz Majewski
Quoted 5 lines
From: Arnd Bergmann <[email protected]>
Most of the remaining ARM board files in the kernel have no known users, and we plan to remove those in early 2023.
Quoted 7 lines
Quoted 3 lines
For ep93xx, Alexander Sverdlin still has access to the edb93xx family of reference boards, while Nikita Shubin has a ts7250 and is working on a device tree conversion for those.
I do know about one actively used TS7250 based board. It is going to be still used for some time. However, I don't have the HW with me, but may be available when the BSP will be refurbished.
Ok, thanks for the information. It sounds like an increasing argument for doing a DT conversion after all. How often does the BSP get a new kernel? I think Nikita's DT conversion for ts7250 (see [1]) shouldn't be too hard to port from 5.11 to 5.20+, as most of the patches just introduce driver support. The multiplatform conversion in 5.19 hopefully made things a bit easier but likely also requires a few extra changes.
Arnd
https://lore.kernel.org/linux-arm-kernel/[email protected]/
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 06/13] ARM: ep93xx: mark most board files as unused
Hi Arnd,
Quoted 11 lines
Quoted 9 lines · Lukasz Majewski
Quoted 8 lines
From: Arnd Bergmann <[email protected]>
Most of the remaining ARM board files in the kernel have no known users, and we plan to remove those in early 2023.
For ep93xx, Alexander Sverdlin still has access to the edb93xx family of reference boards, while Nikita Shubin has a ts7250 and is working on a device tree conversion for those.
Quoted 7 lines
Quoted 3 lines
I do know about one actively used TS7250 based board. It is going to be still used for some time. However, I don't have the HW with me, but may be available when the BSP will be refurbished.
Ok, thanks for the information. It sounds like an increasing argument for doing a DT conversion after all. How often does the BSP get a new kernel?
Last time it was from 2.6.2X to 4.14 LTS ...
Quoted 5 lines
I think Nikita's DT conversion for ts7250 (see [1]) shouldn't be too hard to port from 5.11 to 5.20+, as most of the patches just introduce driver support. The multiplatform conversion in 5.19 hopefully made things a bit easier but likely also requires a few extra changes.
I could easily get updated the customer's board to the DT if at least one ep93xx is in tree (as it is based on TS7250).
However, I cannot predict when the new BSP (with new Kernel) will be required ....
Quoted 4 lines
Arnd
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: [email protected]
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 06/13] ARM: ep93xx: mark most board files as unused
Quoted 4 lines · Lukasz Majewski
Quoted 2 lines · Lukasz Majewski
Quoted 1 line
Quoted 1 line
From: Arnd Bergmann <[email protected]>
Last time it was from 2.6.2X to 4.14 LTS ...
Ok.
Quoted 8 lines
Quoted 5 lines
I think Nikita's DT conversion for ts7250 (see [1]) shouldn't be too hard to port from 5.11 to 5.20+, as most of the patches just introduce driver support. The multiplatform conversion in 5.19 hopefully made things a bit easier but likely also requires a few extra changes.
I could easily get updated the customer's board to the DT if at least one ep93xx is in tree (as it is based on TS7250).
Both the ts7250/bk3 and the edb93xx variants are going to stay for the moment, based on the feedback I got from Alexander and Nikita, so this part is fine.
Quoted 2 lines
However, I cannot predict when the new BSP (with new Kernel) will be required ....
I see that 4.14-lts will stop getting updates in early 2024, so I guess this is the latest point to upgrade in order to still receive security fixes (assuming that you actually update the production kernel periodically for updated 4.14.y releases).
This still gives us the choice between two approaches that let us retire the ep93xx board files in 2024:
a) do the DT conversion over the next 18 months (hopefully quicker) and let you update to that when the 4.14 release ends, with the option of further updates later.
b) do nothing until the LTS release in late 2023 and retire all of ep93xx in early 2024, leaving users with LTS kernel fixes until at least 2027 (depending on how long this release gets maintained).
If everyone is fine with the limitations of b), that is obviously the easier path, otherwise a) should not be that hard either.
Arnd
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Nikita Shubin
maintainerRe: [PATCH 06/13] ARM: ep93xx: mark most board files as unused
Hello Arnd!
Quoted 37 lines · On Fri, 22 Jul 2022 14:16:20 +0200 Arnd Bergmann <[email protected]> wrote:
Quoted 5 lines · Lukasz Majewski
Quoted 3 lines
Quoted 1 line · Lukasz Majewski
Quoted 1 line
From: Arnd Bergmann <[email protected]>
Last time it was from 2.6.2X to 4.14 LTS ...
Ok.
Quoted 8 lines
Quoted 5 lines
I think Nikita's DT conversion for ts7250 (see [1]) shouldn't be too hard to port from 5.11 to 5.20+, as most of the patches just introduce driver support. The multiplatform conversion in 5.19 hopefully made things a bit easier but likely also requires a few extra changes.
I could easily get updated the customer's board to the DT if at least one ep93xx is in tree (as it is based on TS7250).
Both the ts7250/bk3 and the edb93xx variants are going to stay for the moment, based on the feedback I got from Alexander and Nikita, so this part is fine.
Quoted 2 lines
However, I cannot predict when the new BSP (with new Kernel) will be required ....
I see that 4.14-lts will stop getting updates in early 2024, so I guess this is the latest point to upgrade in order to still receive security fixes (assuming that you actually update the production kernel periodically for updated 4.14.y releases).
This still gives us the choice between two approaches that let us retire the ep93xx board files in 2024:
a) do the DT conversion over the next 18 months (hopefully quicker) and let you update to that when the 4.14 release ends, with the option of further updates later.
Quoted 7 lines
b) do nothing until the LTS release in late 2023 and retire all of ep93xx in early 2024, leaving users with LTS kernel fixes until at least 2027 (depending on how long this release gets maintained).
If everyone is fine with the limitations of b), that is obviously the easier path, otherwise a) should not be that hard either.
I feel a bit nostalgic about ts7250, as it was my very first "embedded" Linux board, so i think it needs a proper retirement.
So let me finish the full conversion on the top of 5.20+ and then we can think if it's suitable for plan "a". It won't take long, as i have a bootable BSP on branch [2].
Quoted 2 lines
Arnd
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 06/13] ARM: ep93xx: mark most board files as unused
Quoted 17 lines · Nikita Shubin
Quoted 8 lines · On Fri, 22 Jul 2022 14:16:20 +0200 Arnd Bergmann <[email protected]> wrote:
This still gives us the choice between two approaches that let us retire the ep93xx board files in 2024:
a) do the DT conversion over the next 18 months (hopefully quicker) and let you update to that when the 4.14 release ends, with the option of further updates later.
Quoted 7 lines
b) do nothing until the LTS release in late 2023 and retire all of ep93xx in early 2024, leaving users with LTS kernel fixes until at least 2027 (depending on how long this release gets maintained).
If everyone is fine with the limitations of b), that is obviously the easier path, otherwise a) should not be that hard either.
Quoted 6 lines
I feel a bit nostalgic about ts7250, as it was my very first "embedded" Linux board, so i think it needs a proper retirement.
So let me finish the full conversion on the top of 5.20+ and then we can think if it's suitable for plan "a". It won't take long, as i have a bootable BSP on branch [2].
That is perfect, thanks a lot!
Arnd
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 7/13 ARM: mmp: mark all board files for removal
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
The mmp platform supports both ATAGS based board files and DT booting, but it appears that nobody has been interested in board files for a long time.
Mark all of them for removal in early 2023 with a dependency on CONFIG_UNUSED_BOARD_FILES, leaving only the DT support for the future, unless someone pops up who uses them.
--- arch/arm/configs/mmp2_defconfig | 5 ++--- arch/arm/mach-mmp/Kconfig | 9 +++++++++ 2 files changed, 11 insertions(+), 3 deletions(-)
arch/arm/configs/mmp2_defconfig +2 -3
@@ -5,10 +5,8 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MMP=y -CONFIG_MACH_BROWNSTONE=y -CONFIG_MACH_FLINT=y -CONFIG_MACH_MARVELL_JASPER=y CONFIG_AEABI=y +CONFIG_MACH_MMP2_DT=y CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255 earlyprintk" CONFIG_VFP=y CONFIG_MODULES=y
@@ -56,6 +54,7 @@ CONFIG_BACKLIGHT_MAX8925=y CONFIG_MMC=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MAX8925=y +# CONFIG_RESET_CONTROLLER is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y
arch/arm/mach-mmp/Kconfig +9 -0
@@ -18,6 +18,7 @@ if ATAGS config MACH_ASPENITE bool "Marvell's PXA168 Aspenite Development Board" depends on ARCH_MULTI_V5 + depends on UNUSED_BOARD_FILES select CPU_PXA168 help Say 'Y' here if you want to support the Marvell PXA168-based
@@ -26,6 +27,7 @@ config MACH_ASPENITE config MACH_ZYLONITE2 bool "Marvell's PXA168 Zylonite2 Development Board" depends on ARCH_MULTI_V5 + depends on UNUSED_BOARD_FILES select CPU_PXA168 help Say 'Y' here if you want to support the Marvell PXA168-based
@@ -34,6 +36,7 @@ config MACH_ZYLONITE2 config MACH_AVENGERS_LITE bool "Marvell's PXA168 Avengers Lite Development Board" depends on ARCH_MULTI_V5 + depends on UNUSED_BOARD_FILES select CPU_PXA168 help Say 'Y' here if you want to support the Marvell PXA168-based
@@ -42,6 +45,7 @@ config MACH_AVENGERS_LITE config MACH_TTC_DKB bool "Marvell's PXA910 TavorEVB/TTC_DKB Development Board" depends on ARCH_MULTI_V5 + depends on UNUSED_BOARD_FILES select CPU_PXA910 help Say 'Y' here if you want to support the Marvell PXA910-based
@@ -50,6 +54,7 @@ config MACH_TTC_DKB config MACH_BROWNSTONE bool "Marvell's Brownstone Development Platform" depends on ARCH_MULTI_V7 + depends on UNUSED_BOARD_FILES select CPU_MMP2 help Say 'Y' here if you want to support the Marvell MMP2-based
@@ -61,6 +66,7 @@ config MACH_BROWNSTONE config MACH_FLINT bool "Marvell's Flint Development Platform" depends on ARCH_MULTI_V7 + depends on UNUSED_BOARD_FILES select CPU_MMP2 help Say 'Y' here if you want to support the Marvell MMP2-based
@@ -72,6 +78,7 @@ config MACH_FLINT config MACH_MARVELL_JASPER bool "Marvell's Jasper Development Platform" depends on ARCH_MULTI_V7 + depends on UNUSED_BOARD_FILES select CPU_MMP2 help Say 'Y' here if you want to support the Marvell MMP2-base
@@ -83,6 +90,7 @@ config MACH_MARVELL_JASPER config MACH_TETON_BGA bool "Marvell's PXA168 Teton BGA Development Board" depends on ARCH_MULTI_V5 + depends on UNUSED_BOARD_FILES select CPU_PXA168 help Say 'Y' here if you want to support the Marvell PXA168-based
@@ -91,6 +99,7 @@ config MACH_TETON_BGA config MACH_GPLUGD bool "Marvell's PXA168 GuruPlug Display (gplugD) Board" depends on ARCH_MULTI_V5 + depends on UNUSED_BOARD_FILES select CPU_PXA168 help Say 'Y' here if you want to support the Marvell PXA168-based
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 8/13 ARM: footbridge: mark cats board for removal
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
There are three remaining footbridge boards, as the CO285 and the HP personal server got removed already over the years.
Russell still uses his ebsa285, while both Linus and Marc have a NetWinder that they use for testing. Nobody so far replied that they are using cats, so it goes on the long list of machines to be removed in early 2023 if it stays like this.
--- arch/arm/configs/footbridge_defconfig | 1 - arch/arm/mach-footbridge/Kconfig | 1 + 2 files changed, 1 insertion(+), 1 deletion(-)
arch/arm/configs/footbridge_defconfig +0 -1
@@ -5,7 +5,6 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_HOTPLUG is not set CONFIG_ARCH_FOOTBRIDGE=y -CONFIG_ARCH_CATS=y CONFIG_ARCH_EBSA285_HOST=y CONFIG_ARCH_NETWINDER=y CONFIG_FPE_NWFPE=y
arch/arm/mach-footbridge/Kconfig +1 -0
@@ -5,6 +5,7 @@ menu "Footbridge Implementations" config ARCH_CATS bool "CATS" + depends on UNUSED_BOARD_FILES select CLKEVT_I8253 select CLKSRC_I8253 select FOOTBRIDGE_HOST
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 9/13 ARM: sa1100: mark most boards as unused
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
Most Arm board files are unused and will be removed in early 2023 if no remaining users show up. For the sa1100 platform, the machines that are still in use are:
- Russell's Assabet development board
- Linus' H3600 iPaq PocketPC
- Collie as the only qemu-supported board, to allow testing by others
All remaining sa1100 boards are marked to depend on CONFIG_UNUSED_BOARD_FILES to give potential users a last chance to speak up.
--- arch/arm/configs/badge4_defconfig | 1 + arch/arm/configs/cerfcube_defconfig | 1 + arch/arm/configs/hackkit_defconfig | 1 + arch/arm/configs/jornada720_defconfig | 1 + arch/arm/configs/lart_defconfig | 1 + arch/arm/configs/pleb_defconfig | 1 + arch/arm/configs/shannon_defconfig | 1 + arch/arm/configs/simpad_defconfig | 1 + arch/arm/mach-sa1100/Kconfig | 11 +++++++++++ 9 files changed, 19 insertions(+)
arch/arm/configs/badge4_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_EXPERT=y CONFIG_ARCH_SA1100=y CONFIG_SA1100_BADGE4=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="init=/linuxrc root=/dev/mtdblock3" CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_FPE_NWFPE=y
arch/arm/configs/cerfcube_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_ARCH_SA1100=y CONFIG_SA1100_CERF=y CONFIG_SA1100_CERF_FLASH_16MB=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttySA0,38400 root=/dev/mtdblock3 rootfstype=jffs2 rw mem=32M init=/linuxrc" CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_USERSPACE=m
arch/arm/configs/hackkit_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_ARCH_SA1100=y CONFIG_SA1100_HACKKIT=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttySA0,115200 root=/dev/ram0 initrd=0xc0400000,8M init=/rootshell" CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_FPE_NWFPE=y
arch/arm/configs/jornada720_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_ARCH_SA1100=y CONFIG_SA1100_JORNADA720=y CONFIG_SA1100_JORNADA720_SSP=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_FPE_NWFPE=y CONFIG_BINFMT_AOUT=y CONFIG_PM=y
arch/arm/configs/lart_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_ARCH_SA1100=y CONFIG_SA1100_LART=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttySA0,9600 root=/dev/ram" CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y
arch/arm/configs/pleb_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_EXPERT=y # CONFIG_SHMEM is not set CONFIG_ARCH_SA1100=y CONFIG_SA1100_PLEB=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttySA0,9600 mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0400000,4M" CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y
arch/arm/configs/shannon_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_ARCH_SA1100=y CONFIG_SA1100_SHANNON=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttySA0,9600 console=tty1 root=/dev/mtdblock2 init=/linuxrc" CONFIG_FPE_NWFPE=y CONFIG_MODULES=y
arch/arm/configs/simpad_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_ARCH_SA1100=y CONFIG_SA1100_SIMPAD=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2" CONFIG_FPE_NWFPE=y CONFIG_MODULES=y
arch/arm/mach-sa1100/Kconfig +11 -0
@@ -25,6 +25,7 @@ config ASSABET_NEPONSET config SA1100_CERF bool "CerfBoard" + depends on UNUSED_BOARD_FILES select ARM_SA1110_CPUFREQ select LEDS_GPIO_REGISTER help
@@ -62,6 +63,7 @@ config SA1100_COLLIE config SA1100_H3100 bool "Compaq iPAQ H3100" + depends on UNUSED_BOARD_FILES select ARM_SA1110_CPUFREQ select HTC_EGPIO select MFD_IPAQ_MICRO
@@ -80,6 +82,7 @@ config SA1100_H3600 config SA1100_BADGE4 bool "HP Labs BadgePAD 4" + depends on UNUSED_BOARD_FILES select ARM_SA1100_CPUFREQ select SA1111 help
@@ -88,6 +91,7 @@ config SA1100_BADGE4 config SA1100_JORNADA720 bool "HP Jornada 720" + depends on UNUSED_BOARD_FILES # FIXME: select ARM_SA11x0_CPUFREQ select SA1111 help
@@ -107,6 +111,7 @@ config SA1100_JORNADA720_SSP config SA1100_HACKKIT bool "HackKit Core CPU Board" + depends on UNUSED_BOARD_FILES select ARM_SA1100_CPUFREQ help Say Y here to support the HackKit Core CPU Board
@@ -114,6 +119,7 @@ config SA1100_HACKKIT config SA1100_LART bool "LART" + depends on UNUSED_BOARD_FILES select ARM_SA1100_CPUFREQ help Say Y here if you are using the Linux Advanced Radio Terminal
@@ -122,6 +128,7 @@ config SA1100_LART config SA1100_NANOENGINE bool "nanoEngine" + depends on UNUSED_BOARD_FILES select ARM_SA1110_CPUFREQ select FORCE_PCI select PCI_NANOENGINE
@@ -132,6 +139,7 @@ config SA1100_NANOENGINE config SA1100_PLEB bool "PLEB" + depends on UNUSED_BOARD_FILES select ARM_SA1100_CPUFREQ help Say Y here if you are using version 1 of the Portable Linux
@@ -141,6 +149,7 @@ config SA1100_PLEB config SA1100_SHANNON bool "Shannon" + depends on UNUSED_BOARD_FILES select ARM_SA1100_CPUFREQ select REGULATOR select REGULATOR_FIXED_VOLTAGE
@@ -152,6 +161,7 @@ config SA1100_SHANNON config SA1100_SIMPAD bool "Simpad" + depends on UNUSED_BOARD_FILES select ARM_SA1110_CPUFREQ help The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
@@ -163,6 +173,7 @@ config SA1100_SIMPAD config SA1100_SSP tristate "Generic PIO SSP" + depends on UNUSED_BOARD_FILES help Say Y here to enable support for the generic PIO SSP driver. This isn't for audio support, but for attached sensors and
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 09/13] ARM: sa1100: mark most boards as unused
Quoted 11 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
Most Arm board files are unused and will be removed in early 2023 if no remaining users show up. For the sa1100 platform, the machines that are still in use are:
- Russell's Assabet development board
- Linus' H3600 iPaq PocketPC
- Collie as the only qemu-supported board, to allow testing by others
Quoted 8 lines
All remaining sa1100 boards are marked to depend on
CONFIG_UNUSED_BOARD_FILESto give potential users a last chance to speak up.Cc Kristoffer Ericson <[email protected]>Cc Russell King <[email protected]>Cc Linus Walleij <[email protected]>Signed-off-by Arnd Bergmann <[email protected]>
I'm happy with this, because with these other boards gone it might actually be viable to transition this to DT.
Yours,
Linus Walleij
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 10/13 ARM: omap1: add Kconfig dependencies for unused boards
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
Legacy board files with no known users are planned to get removed in early 2023, and this covers the majority of the omap1 boards as well.
According to Tony, the actual users are all on OSK, Nokia770, and AMS-Delta. Additionally, the sx1 and palmte boards are supported by qemu, which is convenient for testing, so all five stay around past the initial board removal.
As omap1 is now part of the multiplatform build and uses the common-clk framework, it has become easier to convert these to use devicetree based booting in the future.
--- arch/arm/configs/omap1_defconfig | 9 --------- arch/arm/mach-omap1/Kconfig | 10 ++++++++++ 2 files changed, 10 insertions(+), 9 deletions(-)
arch/arm/configs/omap1_defconfig +0 -9
@@ -25,17 +25,8 @@ CONFIG_ARCH_OMAP850=y CONFIG_ARCH_OMAP16XX=y # CONFIG_OMAP_MUX is not set CONFIG_OMAP_RESET_CLOCKS=y -CONFIG_MACH_OMAP_INNOVATOR=y -CONFIG_MACH_OMAP_H2=y -CONFIG_MACH_OMAP_H3=y -CONFIG_MACH_HERALD=y CONFIG_MACH_OMAP_OSK=y -CONFIG_MACH_OMAP_PERSEUS2=y -CONFIG_MACH_OMAP_FSAMPLE=y -CONFIG_MACH_VOICEBLUE=y CONFIG_MACH_OMAP_PALMTE=y -CONFIG_MACH_OMAP_PALMZ71=y -CONFIG_MACH_OMAP_PALMTT=y CONFIG_MACH_SX1=y CONFIG_MACH_NOKIA770=y CONFIG_MACH_AMS_DELTA=y
arch/arm/mach-omap1/Kconfig +10 -0
@@ -132,6 +132,7 @@ comment "OMAP Board Type" config MACH_OMAP_INNOVATOR bool "TI Innovator" depends on ARCH_OMAP15XX || ARCH_OMAP16XX + depends on UNUSED_BOARD_FILES help TI OMAP 1510 or 1610 Innovator board support. Say Y here if you have such a board.
@@ -139,6 +140,7 @@ config MACH_OMAP_INNOVATOR config MACH_OMAP_H2 bool "TI H2 Support" depends on ARCH_OMAP16XX + depends on UNUSED_BOARD_FILES help TI OMAP 1610/1611B H2 board support. Say Y here if you have such a board.
@@ -146,6 +148,7 @@ config MACH_OMAP_H2 config MACH_OMAP_H3 bool "TI H3 Support" depends on ARCH_OMAP16XX + depends on UNUSED_BOARD_FILES help TI OMAP 1710 H3 board support. Say Y here if you have such a board.
@@ -153,6 +156,7 @@ config MACH_OMAP_H3 config MACH_HERALD bool "HTC Herald" depends on ARCH_OMAP850 + depends on UNUSED_BOARD_FILES help HTC Herald smartphone support (AKA T-Mobile Wing, ...)
@@ -166,6 +170,7 @@ config MACH_OMAP_OSK config OMAP_OSK_MISTRAL bool "Mistral QVGA board Support" depends on MACH_OMAP_OSK + depends on UNUSED_BOARD_FILES help The OSK supports an optional add-on board with a Quarter-VGA touchscreen, PDA-ish buttons, a resume button, bicolor LED,
@@ -174,6 +179,7 @@ config OMAP_OSK_MISTRAL config MACH_OMAP_PERSEUS2 bool "TI Perseus2" depends on ARCH_OMAP730 + depends on UNUSED_BOARD_FILES help Support for TI OMAP 730 Perseus2 board. Say Y here if you have such a board.
@@ -181,6 +187,7 @@ config MACH_OMAP_PERSEUS2 config MACH_OMAP_FSAMPLE bool "TI F-Sample" depends on ARCH_OMAP730 + depends on UNUSED_BOARD_FILES help Support for TI OMAP 850 F-Sample board. Say Y here if you have such a board.
@@ -197,6 +204,7 @@ config MACH_OMAP_PALMTE config MACH_OMAP_PALMZ71 bool "Palm Zire71" depends on ARCH_OMAP15XX + depends on UNUSED_BOARD_FILES help Support for the Palm Zire71 PDA. To boot the kernel, you'll need a PalmOS compatible bootloader; check out
@@ -206,6 +214,7 @@ config MACH_OMAP_PALMZ71 config MACH_OMAP_PALMTT bool "Palm Tungsten|T" depends on ARCH_OMAP15XX + depends on UNUSED_BOARD_FILES help Support for the Palm Tungsten|T PDA. To boot the kernel, you'll need a PalmOS compatible bootloader (Garux); check out
@@ -246,6 +255,7 @@ config MACH_AMS_DELTA config MACH_OMAP_GENERIC bool "Generic OMAP board" depends on ARCH_OMAP15XX || ARCH_OMAP16XX + depends on UNUSED_BOARD_FILES help Support for generic OMAP-1510, 1610 or 1710 board with no FPGA. Can be used as template for porting Linux to
Signature · 1 line
2.29.2
Re: [PATCH 10/13] ARM: omap1: add Kconfig dependencies for unused boards
Hi,
Quoted 9 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
Legacy board files with no known users are planned to get removed in early 2023, and this covers the majority of the omap1 boards as well.
According to Tony, the actual users are all on OSK, Nokia770, and AMS-Delta. Additionally, the sx1 and palmte boards are supported by qemu, which is convenient for testing, so all five stay around past the initial board removal.
Actually also Palm TE gets tested with real hardware, I haven't got the kernel working on QEMU.
Quoted 5 lines
As omap1 is now part of the multiplatform build and uses the common-clk framework, it has become easier to convert these to use devicetree based booting in the future.
Cc Aaro Koskinen <[email protected]>
Quoted 118 lines
Cc Janusz Krzysztofik <[email protected]>Cc Tony Lindgren <[email protected]>Signed-off-by Arnd Bergmann <[email protected]>--- arch/arm/configs/omap1_defconfig | 9 --------- arch/arm/mach-omap1/Kconfig | 10 ++++++++++ 2 files changed, 10 insertions(+), 9 deletions(-)arch/arm/configs/omap1_defconfig +0
-9@@ -25,17 +25,8 @@ CONFIG_ARCH_OMAP850=y CONFIG_ARCH_OMAP16XX=y # CONFIG_OMAP_MUX is not set CONFIG_OMAP_RESET_CLOCKS=y -CONFIG_MACH_OMAP_INNOVATOR=y -CONFIG_MACH_OMAP_H2=y -CONFIG_MACH_OMAP_H3=y -CONFIG_MACH_HERALD=y CONFIG_MACH_OMAP_OSK=y -CONFIG_MACH_OMAP_PERSEUS2=y -CONFIG_MACH_OMAP_FSAMPLE=y -CONFIG_MACH_VOICEBLUE=y CONFIG_MACH_OMAP_PALMTE=y -CONFIG_MACH_OMAP_PALMZ71=y -CONFIG_MACH_OMAP_PALMTT=y CONFIG_MACH_SX1=y CONFIG_MACH_NOKIA770=y CONFIG_MACH_AMS_DELTA=yarch/arm/mach-omap1/Kconfig +10
-0@@ -132,6 +132,7 @@ comment "OMAP Board Type" config MACH_OMAP_INNOVATOR bool "TI Innovator" depends on ARCH_OMAP15XX || ARCH_OMAP16XX + depends on UNUSED_BOARD_FILES help TI OMAP 1510 or 1610 Innovator board support. Say Y here if you have such a board.@@ -139,6 +140,7 @@ config MACH_OMAP_INNOVATOR config MACH_OMAP_H2 bool "TI H2 Support" depends on ARCH_OMAP16XX + depends on UNUSED_BOARD_FILES help TI OMAP 1610/1611B H2 board support. Say Y here if you have such a board.@@ -146,6 +148,7 @@ config MACH_OMAP_H2 config MACH_OMAP_H3 bool "TI H3 Support" depends on ARCH_OMAP16XX + depends on UNUSED_BOARD_FILES help TI OMAP 1710 H3 board support. Say Y here if you have such a board.@@ -153,6 +156,7 @@ config MACH_OMAP_H3 config MACH_HERALD bool "HTC Herald" depends on ARCH_OMAP850 + depends on UNUSED_BOARD_FILES help HTC Herald smartphone support (AKA T-Mobile Wing, ...)@@ -166,6 +170,7 @@ config MACH_OMAP_OSK config OMAP_OSK_MISTRAL bool "Mistral QVGA board Support" depends on MACH_OMAP_OSK + depends on UNUSED_BOARD_FILES help The OSK supports an optional add-on board with a Quarter-VGA touchscreen, PDA-ish buttons, a resume button, bicolor LED,@@ -174,6 +179,7 @@ config OMAP_OSK_MISTRAL config MACH_OMAP_PERSEUS2 bool "TI Perseus2" depends on ARCH_OMAP730 + depends on UNUSED_BOARD_FILES help Support for TI OMAP 730 Perseus2 board. Say Y here if you have such a board.@@ -181,6 +187,7 @@ config MACH_OMAP_PERSEUS2 config MACH_OMAP_FSAMPLE bool "TI F-Sample" depends on ARCH_OMAP730 + depends on UNUSED_BOARD_FILES help Support for TI OMAP 850 F-Sample board. Say Y here if you have such a board.@@ -197,6 +204,7 @@ config MACH_OMAP_PALMTE config MACH_OMAP_PALMZ71 bool "Palm Zire71" depends on ARCH_OMAP15XX + depends on UNUSED_BOARD_FILES help Support for the Palm Zire71 PDA. To boot the kernel, you'll need a PalmOS compatible bootloader; check out@@ -206,6 +214,7 @@ config MACH_OMAP_PALMZ71 config MACH_OMAP_PALMTT bool "Palm Tungsten|T" depends on ARCH_OMAP15XX + depends on UNUSED_BOARD_FILES help Support for the Palm Tungsten|T PDA. To boot the kernel, you'll need a PalmOS compatible bootloader (Garux); check out@@ -246,6 +255,7 @@ config MACH_AMS_DELTA config MACH_OMAP_GENERIC bool "Generic OMAP board" depends on ARCH_OMAP15XX || ARCH_OMAP16XX + depends on UNUSED_BOARD_FILES help Support for generic OMAP-1510, 1610 or 1710 board with no FPGA. Can be used as template for porting Linux toSignature · 1 line
2.29.2
A.
PATCH 11/13 ARM: s3c: mark most board files as unused
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
The s3c24xx platform is already scheduled for removal in early 2023, with s3c64xx meeting the same fate a year later.
Most of the s3c64xx board files appear to be unused, as the better maintained ones already got converted to DT. The main exception is the Wolfson Cragganmore board, which remains in use as the reference design for Wolfson/Cirrus devices. As the other boards get removed, this one stays around along with the DT based machines.
The s3c6400_defconfig file now disables the unused boards, while the s3c24xx defconfig files all turn on CONFIG_UNUSED_BOARD_FILES to remain usable.
--- arch/arm/configs/mini2440_defconfig | 1 + arch/arm/configs/s3c2410_defconfig | 1 + arch/arm/configs/s3c6400_defconfig | 9 --------- arch/arm/configs/tct_hammer_defconfig | 1 + arch/arm/mach-s3c/Kconfig.s3c24xx | 2 +- arch/arm/mach-s3c/Kconfig.s3c64xx | 20 ++++++++++---------- 6 files changed, 14 insertions(+), 20 deletions(-)
arch/arm/configs/mini2440_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_S3C_ADC=y CONFIG_CPU_S3C2440=y CONFIG_MACH_MINI2440=y CONFIG_AEABI=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_KEXEC=y CONFIG_CPU_IDLE=y CONFIG_APM_EMULATION=y
arch/arm/configs/s3c2410_defconfig +1 -0
@@ -37,6 +37,7 @@ CONFIG_ARCH_S3C2440=y CONFIG_MACH_NEO1973_GTA02=y CONFIG_MACH_RX1950=y CONFIG_MACH_SMDK2443=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0" CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y
arch/arm/configs/s3c6400_defconfig +0 -9
@@ -5,15 +5,6 @@ CONFIG_KALLSYMS_ALL=y CONFIG_ARCH_MULTI_V6=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_S3C64XX=y -CONFIG_MACH_SMDK6400=y -CONFIG_MACH_ANW6410=y -CONFIG_MACH_MINI6410=y -CONFIG_MACH_REAL6410=y -CONFIG_MACH_SMDK6410=y -CONFIG_MACH_NCP=y -CONFIG_MACH_HMT=y -CONFIG_MACH_SMARTQ5=y -CONFIG_MACH_SMARTQ7=y CONFIG_MACH_WLF_CRAGG_6410=y CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144" CONFIG_VFP=y
arch/arm/configs/tct_hammer_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_ARCH_MULTI_V4T=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_S3C24XX=y CONFIG_MACH_TCT_HAMMER=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="mem=64M root=/dev/ram0 init=/linuxrc rw" CONFIG_FPE_NWFPE=y CONFIG_MODULES=y
arch/arm/mach-s3c/Kconfig.s3c24xx +1 -1
@@ -8,7 +8,7 @@ menuconfig ARCH_S3C24XX bool "Samsung S3C24XX SoCs (deprecated, see help)" depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 depends on CPU_LITTLE_ENDIAN - depends on ATAGS + depends on ATAGS && UNUSED_BOARD_FILES select CLKSRC_SAMSUNG_PWM select GPIO_SAMSUNG select GPIOLIB
arch/arm/mach-s3c/Kconfig.s3c64xx +10 -10
@@ -114,8 +114,8 @@ config S3C64XX_SETUP_USB_PHY # S36400 Macchine support config MACH_SMDK6400 - bool "SMDK6400" - depends on ATAGS + bool "SMDK6400" + depends on ATAGS && UNUSED_BOARD_FILES select CPU_S3C6400 select S3C64XX_SETUP_SDHCI select S3C_DEV_HSMMC1
@@ -126,7 +126,7 @@ config MACH_SMDK6400 config MACH_ANW6410 bool "A&W6410" - depends on ATAGS + depends on ATAGS && UNUSED_BOARD_FILES select CPU_S3C6410 select S3C64XX_SETUP_FB_24BPP select S3C_DEV_FB
@@ -135,7 +135,7 @@ config MACH_ANW6410 config MACH_MINI6410 bool "MINI6410" - depends on ATAGS + depends on ATAGS && UNUSED_BOARD_FILES select CPU_S3C6410 select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_SDHCI
@@ -151,7 +151,7 @@ config MACH_MINI6410 config MACH_REAL6410 bool "REAL6410" - depends on ATAGS + depends on ATAGS && UNUSED_BOARD_FILES select CPU_S3C6410 select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_SDHCI
@@ -167,7 +167,7 @@ config MACH_REAL6410 config MACH_SMDK6410 bool "SMDK6410" - depends on ATAGS + depends on ATAGS && UNUSED_BOARD_FILES select CPU_S3C6410 select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_I2C1
@@ -254,7 +254,7 @@ config SMDK6410_WM1192_EV1 config MACH_NCP bool "NCP" - depends on ATAGS + depends on ATAGS && UNUSED_BOARD_FILES select CPU_S3C6410 select S3C64XX_SETUP_I2C1 select S3C_DEV_HSMMC1
@@ -264,7 +264,7 @@ config MACH_NCP config MACH_HMT bool "Airgoo HMT" - depends on ATAGS + depends on ATAGS && UNUSED_BOARD_FILES select CPU_S3C6410 select S3C64XX_SETUP_FB_24BPP select S3C_DEV_FB
@@ -296,14 +296,14 @@ config MACH_SMARTQ config MACH_SMARTQ5 bool "SmartQ 5" - depends on ATAGS + depends on ATAGS && UNUSED_BOARD_FILES select MACH_SMARTQ help Machine support for the SmartQ 5 config MACH_SMARTQ7 bool "SmartQ 7" - depends on ATAGS + depends on ATAGS && UNUSED_BOARD_FILES select MACH_SMARTQ help Machine support for the SmartQ 7
Signature · 1 line
2.29.2
Re: [PATCH 11/13] ARM: s3c: mark most board files as unused
Quoted 11 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The s3c24xx platform is already scheduled for removal in early 2023, with s3c64xx meeting the same fate a year later.
Most of the s3c64xx board files appear to be unused, as the better maintained ones already got converted to DT. The main exception is the Wolfson Cragganmore board, which remains in use as the reference design for Wolfson/Cirrus devices. As the other boards get removed, this one stays around along with the DT based machines.
Quoted 4 lines
The
s3c6400_defconfigfile now disables the unused boards, while the s3c24xx defconfig files all turn onCONFIG_UNUSED_BOARD_FILESto remain usable.
Best regards,
Krzysztof
PATCH 12/13 ARM: iop32x: mark as unused
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
The iop32x platform has recently been converted to be part of the multiplatform configuration, and it should be possible to keep it alive for longer by making it boot from devicetree like we did for the related ixp4xx platform.
However, it appears that no users remain at this point, so just mark the entire platfor depending on CONFIG_UNUSED_BOARD_FILES, with the intention of removing it in early 2023.
If any users remain, please speak up now.
--- arch/arm/configs/iop32x_defconfig | 1 + arch/arm/mach-iop32x/Kconfig | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-)
arch/arm/configs/iop32x_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_MACH_GLANTANK=y CONFIG_ARCH_IQ80321=y CONFIG_ARCH_IQ31244=y CONFIG_MACH_N2100=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc" CONFIG_FPE_NWFPE=y CONFIG_BINFMT_AOUT=y
arch/arm/mach-iop32x/Kconfig +1 -1
@@ -3,7 +3,7 @@ menuconfig ARCH_IOP32X bool "IOP32x-based platforms" depends on ARCH_MULTI_V5 depends on CPU_LITTLE_ENDIAN - depends on ATAGS + depends on ATAGS && UNUSED_BOARD_FILES select CPU_XSCALE select GPIO_IOP select GPIOLIB
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
RE: [PATCH 12/13] ARM: iop32x: mark as unused
Quoted 9 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
The iop32x platform has recently been converted to be part of the multiplatform configuration, and it should be possible to keep it alive for longer by making it boot from devicetree like we did for the related ixp4xx platform.
However, it appears that no users remain at this point, so just mark the entire platfor depending on
CONFIG_UNUSED_BOARD_FILES,
s/platfor/platform/
Quoted 5 lines
with the intention of removing it in early 2023.
If any users remain, please speak up now.
Cc Dan Williams <[email protected]>
Quoted 35 lines
Cc Lennert Buytenhek <[email protected]>Signed-off-by Arnd Bergmann <[email protected]>--- arch/arm/configs/iop32x_defconfig | 1 + arch/arm/mach-iop32x/Kconfig | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-)arch/arm/configs/iop32x_defconfig +1
-0@@ -9,6 +9,7 @@ CONFIG_MACH_GLANTANK=y CONFIG_ARCH_IQ80321=y CONFIG_ARCH_IQ31244=y CONFIG_MACH_N2100=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc" CONFIG_FPE_NWFPE=y CONFIG_BINFMT_AOUT=yarch/arm/mach-iop32x/Kconfig +1
-1@@ -3,7 +3,7 @@ menuconfig ARCH_IOP32X bool "IOP32x-based platforms" depends on ARCH_MULTI_V5 depends on CPU_LITTLE_ENDIAN - depends on ATAGS + depends on ATAGS && UNUSED_BOARD_FILES select CPU_XSCALE select GPIO_IOP select GPIOLIBSignature · 1 line
2.29.2
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 13/13 ARM: cns3xxx: add CONFIG_UNUSED_BOARD_FILES dependency
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
Krzysztof Halasa has kept the cns3xxx platform working for a long time but has moved away from working on it. The OpenWRT port was dropped in 2020, and support for the Gateworks Laguna platform never made it into the mainline kernel, which only supports the reference design.
Further, the ARM11MPCore has an unresolved issue with instruction cache coherency, and removing support for the remaining platforms using this core would be the easiest solution.
Mark the entire platform as unused now, to be removed in early 2023 if no users show up.
--- arch/arm/configs/cns3420vb_defconfig | 1 + arch/arm/mach-cns3xxx/Kconfig | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-)
arch/arm/configs/cns3420vb_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_PROFILING=y CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_CNS3XXX=y CONFIG_MACH_CNS3420VB=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait" CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y
arch/arm/mach-cns3xxx/Kconfig +1 -1
@@ -2,7 +2,7 @@ menuconfig ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" depends on ARCH_MULTI_V6 - depends on ATAGS + depends on ATAGS && UNUSED_BOARD_FILES select ARM_GIC help Support for Cavium Networks CNS3XXX platform.
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel