pwm-backlight: switch to gpiod interface (part 1)
Subsystems (6)
cover pwm-backlight: switch to gpiod interface (part 1)
These two patches initiate the switch of the pwm-backlight driver to the gpiod GPIO interface, as it considerably simplifies the code.
For compatibility with current users of the driver, it is still possible to pass the enable GPIO number as platform data. Two platforms are still relying on this feature (pxa/palmtc and shmobile/armadillo800eva) which will be removed as soon as its last users are switched to GPIO mapping tables.
Alexandre Courbot (2):
ARM: SAMSUNG: remove gpio flags in dev-backlight
pwm-backlight: switch to gpiod interface
arch/arm/plat-samsung/dev-backlight.c | 2 - drivers/video/backlight/pwm_bl.c | 72 +++++++++++++++-------------------- include/linux/pwm_backlight.h | 5 +-- 3 files changed, 32 insertions(+), 47 deletions(-)
Signature · 1 line
1.9.0
PATCH 1/2 ARM: SAMSUNG: remove gpio flags in dev-backlight
The pwm-backlight driver is moving to use the gpiod interface, which has its own mapping mechanism for platform data GPIOs. These mappings carry GPIO properties like active low so they don't have to be explicitly handled by GPIO consumers.
Because of this change, the enable_gpio_flags member of platform_pwm_backlight_data is going away. dev-backlight was passing this member, but had no user making use of it, so it can safely be removed. Further GPIOs used by pwm-backlight are expected to be defined using the mechanisms provided by the gpiod API.
--- arch/arm/plat-samsung/dev-backlight.c | 2 -- 1 file changed, 2 deletions(-)
arch/arm/plat-samsung/dev-backlight.c +0 -2
@@ -124,8 +124,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, samsung_bl_data->pwm_period_ns = bl_data->pwm_period_ns;if (bl_data->enable_gpio >=0 ) samsung_bl_data->enable_gpio = bl_data->enable_gpio; -if (bl_data->enable_gpio_flags) - samsung_bl_data->enable_gpio_flags = bl_data->enable_gpio_flags;if (bl_data->init) samsung_bl_data->init = bl_data->init;if (bl_data->notify)
Signature · 1 line
1.9.0
Re: [PATCH 1/2] ARM: SAMSUNG: remove gpio flags in dev-backlight
Ping, can I have the Samsung folks review and ,aybe even merge this patch? enable_gpio_flags is never used in any code, is replaced by gpiod, and we would like to remove it altogether from pwm_bl. Thanks!
Alex.
Quoted 36 lines · Alexandre Courbot
The pwm-backlight driver is moving to use the gpiod interface, which has its own mapping mechanism for platform data GPIOs. These mappings carry GPIO properties like active low so they don't have to be explicitly handled by GPIO consumers.
Because of this change, the
enable_gpio_flagsmember ofplatform_pwm_backlight_datais going away. dev-backlight was passing this member, but had no user making use of it, so it can safely be removed. Further GPIOs used by pwm-backlight are expected to be defined using the mechanisms provided by the gpiod API.Signed-off-by Alexandre Courbot <[email protected]>--- arch/arm/plat-samsung/dev-backlight.c | 2 -- 1 file changed, 2 deletions(-)arch/arm/plat-samsung/dev-backlight.c +0
-3@@ -124,8 +124,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, samsung_bl_data->pwm_period_ns = bl_data->pwm_period_ns;if (bl_data->enable_gpio >=0 ) samsung_bl_data->enable_gpio = bl_data->enable_gpio; -if (bl_data->enable_gpio_flags) - samsung_bl_data->enable_gpio_flags = bl_data->enable_gpio_flags;if (bl_data->init) samsung_bl_data->init = bl_data->init;if (bl_data->notify) --1.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Jingoo Han
Reviewed-byRe: [PATCH 1/2] ARM: SAMSUNG: remove gpio flags in dev-backlight
Quoted 4 lines · Alexandre Courbot
Ping, can I have the Samsung folks review and ,aybe even merge this patch?
enable_gpio_flagsis never used in any code, is replaced by gpiod, and we would like to remove it altogether frompwm_bl. Thanks!
OK, I see. It looks good.
As far as I know, 'enable_gpio_flags' has not been being used for Samsung platform. So, there will be no side effect, if 'enable_gpio_flags' is removed from 'arch/arm/plat-samsung' directory.
Best regards,
Jingoo Han
Quoted 35 lines
Alex.
Quoted 31 lines · Alexandre Courbot
The pwm-backlight driver is moving to use the gpiod interface, which has its own mapping mechanism for platform data GPIOs. These mappings carry GPIO properties like active low so they don't have to be explicitly handled by GPIO consumers.
Because of this change, the
enable_gpio_flagsmember ofplatform_pwm_backlight_datais going away. dev-backlight was passing this member, but had no user making use of it, so it can safely be removed. Further GPIOs used by pwm-backlight are expected to be defined using the mechanisms provided by the gpiod API.Signed-off-by Alexandre Courbot <[email protected]>--- arch/arm/plat-samsung/dev-backlight.c | 2 -- 1 file changed, 2 deletions(-)arch/arm/plat-samsung/dev-backlight.c +0
-3@@ -124,8 +124,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, samsung_bl_data->pwm_period_ns = bl_data->pwm_period_ns;if (bl_data->enable_gpio >=0 ) samsung_bl_data->enable_gpio = bl_data->enable_gpio; -if (bl_data->enable_gpio_flags) - samsung_bl_data->enable_gpio_flags = bl_data->enable_gpio_flags;if (bl_data->init) samsung_bl_data->init = bl_data->init;if (bl_data->notify) --1.9.0
Re: [PATCH 1/2] ARM: SAMSUNG: remove gpio flags in dev-backlight
Quoted 6 lines · Jingoo Han
Quoted 4 lines · Alexandre Courbot
Ping, can I have the Samsung folks review and ,aybe even merge this patch?
enable_gpio_flagsis never used in any code, is replaced by gpiod, and we would like to remove it altogether frompwm_bl. Thanks!
Quoted 8 lines
OK, I see. It looks good.
As far as I know, '
enable_gpio_flags' has not been being used for Samsung platform. So, there will be no side effect, if 'enable_gpio_flags' is removed from 'arch/arm/plat-samsung' directory.Reviewed-by Jingoo Han <[email protected]>
Great, thanks. Ben, Kukjin, could we have your Acked-by?
Thierry, if the Samsung maintainers are ok with it, and 2/2 of this series is also ok for you (you merged the same for simple-panel already), can you take both into your tree?
Thanks,
Alex.
Re: [PATCH 1/2] ARM: SAMSUNG: remove gpio flags in dev-backlight
Quoted 14 lines · Alexandre Courbot
Quoted 13 lines · Jingoo Han
Quoted 4 lines · Alexandre Courbot
Ping, can I have the Samsung folks review and ,aybe even merge this patch?
enable_gpio_flagsis never used in any code, is replaced by gpiod, and we would like to remove it altogether frompwm_bl. Thanks!OK, I see. It looks good.
As far as I know, '
enable_gpio_flags' has not been being used for Samsung platform. So, there will be no side effect, if 'enable_gpio_flags' is removed from 'arch/arm/plat-samsung' directory.
Quoted 7 lines
Quoted 1 line
Reviewed-by Jingoo Han <[email protected]>Great, thanks. Ben, Kukjin, could we have your Acked-by?
Thierry, if the Samsung maintainers are ok with it, and 2/2 of this series is also ok for you (you merged the same for simple-panel already), can you take both into your tree?
Last call - could we have a Acked-by from Ben or Kukjin and merge this through Thierry's tree? Otherwise I will just have to drop this series, which would be sad.
RE: [PATCH 1/2] ARM: SAMSUNG: remove gpio flags in dev-backlight
Quoted 21 lines · Alexandre Courbot
Quoted 18 lines · Alexandre Courbot
Quoted 6 lines · Jingoo Han
Quoted 4 lines · Alexandre Courbot
Ping, can I have the Samsung folks review and ,aybe even merge this patch?
enable_gpio_flagsis never used in any code, is replaced by gpiod, and we would like to remove it altogether frompwm_bl. Thanks!Quoted 8 lines
OK, I see. It looks good.
As far as I know, '
enable_gpio_flags' has not been being used for Samsung platform. So, there will be no side effect, if 'enable_gpio_flags' is removed from 'arch/arm/plat-samsung' directory.Reviewed-by Jingoo Han <[email protected]>Great, thanks. Ben, Kukjin, could we have your Acked-by?
Quoted 7 lines
Quoted 3 lines
Thierry, if the Samsung maintainers are ok with it, and 2/2 of this series is also ok for you (you merged the same for simple-panel already), can you take both into your tree?
Last call - could we have a Acked-by from Ben or Kukjin and merge this through Thierry's tree? Otherwise I will just have to drop this series, which would be sad.
Very sorry for late response. I missed... :(
Looks good to me, so please go ahead with my ack.
Thanks,
Kukjin
Re: [PATCH 1/2] ARM: SAMSUNG: remove gpio flags in dev-backlight
Quoted 26 lines · Kukjin Kim
Quoted 25 lines · Alexandre Courbot
Quoted 21 lines · Alexandre Courbot
Quoted 6 lines · Jingoo Han
Quoted 4 lines · Alexandre Courbot
Ping, can I have the Samsung folks review and ,aybe even merge this patch?
enable_gpio_flagsis never used in any code, is replaced by gpiod, and we would like to remove it altogether frompwm_bl. Thanks!Quoted 8 lines
OK, I see. It looks good.
As far as I know, '
enable_gpio_flags' has not been being used for Samsung platform. So, there will be no side effect, if 'enable_gpio_flags' is removed from 'arch/arm/plat-samsung' directory.Reviewed-by Jingoo Han <[email protected]>Great, thanks. Ben, Kukjin, could we have your Acked-by?
Thierry, if the Samsung maintainers are ok with it, and 2/2 of this series is also ok for you (you merged the same for simple-panel already), can you take both into your tree?
Quoted 7 lines
Quoted 3 lines
Last call - could we have a Acked-by from Ben or Kukjin and merge this through Thierry's tree? Otherwise I will just have to drop this series, which would be sad.
Very sorry for late response. I missed... :(
Looks good to me, so please go ahead with my ack.
Thanks Kukjin!
Thierry, do you want me to rebase and resend these (now old) patches? I haven't heard anything from you about them yet.
Cheers,
Alex.
Re: [PATCH 1/2] ARM: SAMSUNG: remove gpio flags in dev-backlight
Quoted 31 lines · Alexandre Courbot
Quoted 30 lines · Kukjin Kim
Quoted 28 lines · Alexandre Courbot
Quoted 14 lines · Alexandre Courbot
Quoted 13 lines · Jingoo Han
Quoted 4 lines · Alexandre Courbot
Ping, can I have the Samsung folks review and ,aybe even merge this patch?
enable_gpio_flagsis never used in any code, is replaced by gpiod, and we would like to remove it altogether frompwm_bl. Thanks!OK, I see. It looks good.
As far as I know, '
enable_gpio_flags' has not been being used for Samsung platform. So, there will be no side effect, if 'enable_gpio_flags' is removed from 'arch/arm/plat-samsung' directory.Quoted 7 lines
Quoted 1 line
Reviewed-by Jingoo Han <[email protected]>Great, thanks. Ben, Kukjin, could we have your Acked-by?
Thierry, if the Samsung maintainers are ok with it, and 2/2 of this series is also ok for you (you merged the same for simple-panel already), can you take both into your tree?
Last call - could we have a Acked-by from Ben or Kukjin and merge this through Thierry's tree? Otherwise I will just have to drop this series, which would be sad.
Quoted 8 lines
Quoted 3 lines
Very sorry for late response. I missed... :(
Looks good to me, so please go ahead with my ack.
Thanks Kukjin!
Thierry, do you want me to rebase and resend these (now old) patches? I haven't heard anything from you about them yet.
No, that's fine. I can handle them.
Thanks,
Thierry
Re: [PATCH 1/2] ARM: SAMSUNG: remove gpio flags in dev-backlight
In reply to Alexandre CourbotQuoted 11 lines · Alexandre Courbot
The pwm-backlight driver is moving to use the gpiod interface, which has its own mapping mechanism for platform data GPIOs. These mappings carry GPIO properties like active low so they don't have to be explicitly handled by GPIO consumers.
Because of this change, the
enable_gpio_flagsmember ofplatform_pwm_backlight_datais going away. dev-backlight was passing this member, but had no user making use of it, so it can safely be removed. Further GPIOs used by pwm-backlight are expected to be defined using the mechanisms provided by the gpiod API.
Quoted 4 lines
Signed-off-by Alexandre Courbot <[email protected]>--- arch/arm/plat-samsung/dev-backlight.c | 2 -- 1 file changed, 2 deletions(-)
Applied with Kukjin's Acked-by, thanks.
Thierry
PATCH 2/2 pwm-backlight: switch to gpiod interface
In reply to Alexandre CourbotSwitch to the new gpiod interface, which allows to handle GPIO properties such as active low transparently and removes a whole bunch of code.
There are still a couple of users of this driver that rely on passing the enable GPIO number through platform data, so a fallback mechanism using a GPIO number is still available to avoid breaking them. It will be removed once current users have switched to the GPIO lookup tables provided by the gpiod interface.
--- drivers/video/backlight/pwm_bl.c | 72 +++++++++++++++++----------------------- include/linux/pwm_backlight.h | 5 +-- 2 files changed, 32 insertions(+), 45 deletions(-)
drivers/video/backlight/pwm_bl.c +31 -41
@@ -10,8 +10,8 @@* published by the Free Software Foundation. */ +#include <linux/gpio/consumer.h> #include <linux/gpio.h> -#include <linux/of_gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h>
@@ -32,8 +32,7 @@ struct pwm_bl_data {unsigned int *levels;bool enabled;struct regulator *power_supply; -int enable_gpio; -unsigned long enable_gpio_flags; +struct gpio_desc *enable_gpio;unsigned int scale;int (*notify)(struct device *,int brightness);
@@ -54,12 +53,8 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness)if (err <0 )dev_err (pb->dev,"failed to enable power supply\n" ); -if (gpio_is_valid (pb->enable_gpio)) { -if (pb->enable_gpio_flags &PWM_BACKLIGHT_GPIO_ACTIVE_LOW ) -gpio_set_value (pb->enable_gpio,0 ); -else -gpio_set_value (pb->enable_gpio,1 ); - } +if (pb->enable_gpio) +gpiod_set_value (pb->enable_gpio,1 );pwm_enable (pb->pwm); pb->enabled = true;
@@ -73,12 +68,8 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb)pwm_config (pb->pwm,0 , pb->period);pwm_disable (pb->pwm); -if (gpio_is_valid (pb->enable_gpio)) { -if (pb->enable_gpio_flags &PWM_BACKLIGHT_GPIO_ACTIVE_LOW ) -gpio_set_value (pb->enable_gpio,1 ); -else -gpio_set_value (pb->enable_gpio,0 ); - } +if (pb->enable_gpio) +gpiod_set_value (pb->enable_gpio,0 );regulator_disable (pb->power_supply); pb->enabled = false;
@@ -148,7 +139,6 @@ static int pwm_backlight_parse_dt(struct device *dev, struct platform_pwm_backlight_data *data) {struct device_node *node = dev->of_node; -enum of_gpio_flags flags;struct property *prop;int length;u32 value;
@@ -189,14 +179,6 @@ static int pwm_backlight_parse_dt(struct device *dev, data->max_brightness--; } - data->enable_gpio =of_get_named_gpio_flags (node,"enable-gpios" ,0 , - &flags); -if (data->enable_gpio == -EPROBE_DEFER ) -return -EPROBE_DEFER ; - -if (gpio_is_valid (data->enable_gpio) && (flags &OF_GPIO_ACTIVE_LOW )) - data->enable_gpio_flags |=PWM_BACKLIGHT_GPIO_ACTIVE_LOW ; -return 0 ; }
@@ -256,8 +238,6 @@ static int pwm_backlight_probe(struct platform_device *pdev) }else pb->scale = data->max_brightness; - pb->enable_gpio = data->enable_gpio; - pb->enable_gpio_flags = data->enable_gpio_flags; pb->notify = data->notify; pb->notify_after = data->notify_after; pb->check_fb = data->check_fb;
@@ -265,26 +245,39 @@ static int pwm_backlight_probe(struct platform_device *pdev) pb->dev = &pdev->dev; pb->enabled = false; -if (gpio_is_valid (pb->enable_gpio)) { -unsigned long flags; - -if (pb->enable_gpio_flags &PWM_BACKLIGHT_GPIO_ACTIVE_LOW ) - flags =GPIOF_OUT_INIT_HIGH ; -else - flags =GPIOF_OUT_INIT_LOW ; + pb->enable_gpio =devm_gpiod_get (&pdev->dev,"enable" ); +if (IS_ERR (pb->enable_gpio)) { + ret =PTR_ERR (pb->enable_gpio); +if (ret == -ENOENT ) { + pb->enable_gpio =NULL ; + ret =0 ; + }else { + goto err_alloc; + } + } - ret =gpio_request_one (pb->enable_gpio, flags,"enable" ); +/* +* Compatibility fallback for drivers still using the integer GPIO +* platform data. Must go away soon. +*/ +if (pb->enable_gpio ==NULL &&gpio_is_valid (data->enable_gpio)) { + ret =devm_gpio_request_one (&pdev->dev, data->enable_gpio, +GPIOF_OUT_INIT_HIGH ,"enable" );if (ret <0 ) {dev_err (&pdev->dev,"failed to request GPIO#%d: %d\n" , - pb->enable_gpio, ret); + data->enable_gpio, ret); goto err_alloc; } + pb->enable_gpio =gpio_to_desc (data->enable_gpio); } +if (pb->enable_gpio) +gpiod_direction_output (pb->enable_gpio,1 ); + pb->power_supply =devm_regulator_get (&pdev->dev,"power" );if (IS_ERR (pb->power_supply)) { ret =PTR_ERR (pb->power_supply); - goto err_gpio; + goto err_alloc; } pb->pwm =devm_pwm_get (&pdev->dev,NULL );
@@ -295,7 +288,7 @@ static int pwm_backlight_probe(struct platform_device *pdev)if (IS_ERR (pb->pwm)) {dev_err (&pdev->dev,"unable to request legacy PWM\n" ); ret =PTR_ERR (pb->pwm); - goto err_gpio; + goto err_alloc; } }
@@ -320,7 +313,7 @@ static int pwm_backlight_probe(struct platform_device *pdev)if (IS_ERR (bl)) {dev_err (&pdev->dev,"failed to register backlight\n" ); ret =PTR_ERR (bl); - goto err_gpio; + goto err_alloc; }if (data->dft_brightness > data->max_brightness) {
@@ -336,9 +329,6 @@ static int pwm_backlight_probe(struct platform_device *pdev)platform_set_drvdata (pdev, bl);return 0 ; -err_gpio: -if (gpio_is_valid (pb->enable_gpio)) -gpio_free (pb->enable_gpio); err_alloc:if (data->exit) data->exit (&pdev->dev);
include/linux/pwm_backlight.h +1 -4
@@ -6,9 +6,6 @@#include <linux/backlight.h> -/* TODO: convert to gpiod_*() API once it has been merged */ -#define PWM_BACKLIGHT_GPIO_ACTIVE_LOW (1 << 0) -struct platform_pwm_backlight_data {int pwm_id;unsigned int max_brightness;
@@ -16,8 +13,8 @@ struct platform_pwm_backlight_data {unsigned int lth_brightness;unsigned int pwm_period_ns;unsigned int *levels; +/* TODO remove once all users are switched to gpiod_* API */ int enable_gpio; -unsigned long enable_gpio_flags;int (*init)(struct device *dev);int (*notify)(struct device *dev,int brightness);void (*notify_after)(struct device *dev,int brightness);
Signature · 1 line
1.9.0
Re: [PATCH 2/2] pwm-backlight: switch to gpiod interface
Quoted 10 lines · Alexandre Courbot
Switch to the new gpiod interface, which allows to handle GPIO properties such as active low transparently and removes a whole bunch of code.
There are still a couple of users of this driver that rely on passing the enable GPIO number through platform data, so a fallback mechanism using a GPIO number is still available to avoid breaking them. It will be removed once current users have switched to the GPIO lookup tables provided by the gpiod interface.
Quoted 5 lines
Signed-off-by Alexandre Courbot <[email protected]>--- drivers/video/backlight/pwm_bl.c | 72 +++++++++++++++++----------------------- include/linux/pwm_backlight.h | 5 +-- 2 files changed, 32 insertions(+), 45 deletions(-)
I've applied this with two tiny changes, see below. Please shout if you think that's a bad idea.
Quoted 1 line
drivers/video/backlight/pwm_bl.c +0
-0
[...]
Quoted 1 line
drivers/video/backlight/pwm_bl.c +0
-0@@ -256,8 +238,6 @@ static int pwm_backlight_probe(struct platform_device *pdev)
[...]
drivers/video/backlight/pwm_bl.c static int pwm_backlight_probe(struct platform_device *pdev) · line 256
Quoted 9 lines
drivers/video/backlight/pwm_bl.c +9
-0+ pb->enable_gpio =devm_gpiod_get (&pdev->dev,"enable" ); +if (IS_ERR (pb->enable_gpio)) { + ret =PTR_ERR (pb->enable_gpio); +if (ret == -ENOENT ) { + pb->enable_gpio =NULL ; + ret =0 ; + }else { + goto err_alloc; + }
I dropped the ret = 0 here because all error paths set it explicitly and the non-error path never uses it. Now all branches have a single statement and therefore the braces can be dropped.
drivers/video/backlight/pwm_bl.c static int pwm_backlight_probe(struct platform_device *pdev) · line 263
Quoted 5 lines
drivers/video/backlight/pwm_bl.c +5
-0+/* +* Compatibility fallback for drivers still using the integer GPIO +* platform data. Must go away soon. +*/ +if (pb->enable_gpio ==NULL &&gpio_is_valid (data->enable_gpio)) {
Changed the first condition to !pb->enable_gpio for consistency.
Thierry
Re: [PATCH 2/2] pwm-backlight: switch to gpiod interface
Quoted 11 lines · Thierry Reding
Quoted 10 lines · Alexandre Courbot
Switch to the new gpiod interface, which allows to handle GPIO properties such as active low transparently and removes a whole bunch of code.
There are still a couple of users of this driver that rely on passing the enable GPIO number through platform data, so a fallback mechanism using a GPIO number is still available to avoid breaking them. It will be removed once current users have switched to the GPIO lookup tables provided by the gpiod interface.
Quoted 8 lines
Quoted 5 lines
Signed-off-by Alexandre Courbot <[email protected]>--- drivers/video/backlight/pwm_bl.c | 72 +++++++++++++++++----------------------- include/linux/pwm_backlight.h | 5 +-- 2 files changed, 32 insertions(+), 45 deletions(-)I've applied this with two tiny changes, see below. Please shout if you think that's a bad idea.
I'm fine with both changes. Thanks for picking these two guys!
Alex.
Quoted 28 lines
Quoted 2 lines
drivers/video/backlight/pwm_bl.c +0
-0[...]
Quoted 1 line
drivers/video/backlight/pwm_bl.c +0
-0@@ -256,8 +238,6 @@ static int pwm_backlight_probe(struct platform_device *pdev)[...]
drivers/video/backlight/pwm_bl.c static int pwm_backlight_probe(struct platform_device *pdev) · line 256
Quoted 9 lines
drivers/video/backlight/pwm_bl.c +9
-0+ pb->enable_gpio =devm_gpiod_get (&pdev->dev,"enable" ); +if (IS_ERR (pb->enable_gpio)) { + ret =PTR_ERR (pb->enable_gpio); +if (ret == -ENOENT ) { + pb->enable_gpio =NULL ; + ret =0 ; + }else { + goto err_alloc; + }I dropped the ret = 0 here because all error paths set it explicitly and the non-error path never uses it. Now all branches have a single statement and therefore the braces can be dropped.
drivers/video/backlight/pwm_bl.c static int pwm_backlight_probe(struct platform_device *pdev) · line 263
Quoted 5 lines
drivers/video/backlight/pwm_bl.c +5
-0+/* +* Compatibility fallback for drivers still using the integer GPIO +* platform data. Must go away soon. +*/ +if (pb->enable_gpio ==NULL &&gpio_is_valid (data->enable_gpio)) {Changed the first condition to !pb->enable_gpio for consistency.
Thierry
Ping Thierry, can you have a look at this series? It is quite similar to the same change you merged for panel-simple (although I cannot see it in -next neither).
Quoted 25 lines · Alexandre Courbot
These two patches initiate the switch of the pwm-backlight driver to the gpiod GPIO interface, as it considerably simplifies the code.
For compatibility with current users of the driver, it is still possible to pass the enable GPIO number as platform data. Two platforms are still relying on this feature (pxa/palmtc and shmobile/armadillo800eva) which will be removed as soon as its last users are switched to GPIO mapping tables.
Alexandre Courbot (2):
ARM: SAMSUNG: remove gpio flags in dev-backlight
pwm-backlight: switch to gpiod interfacearch/arm/plat-samsung/dev-backlight.c | 2 - drivers/video/backlight/pwm_bl.c | 72 +++++++++++++++-------------------- include/linux/pwm_backlight.h | 5 +-- 3 files changed, 32 insertions(+), 47 deletions(-)--
1.9.0--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 4 lines · Alexandre Courbot
Ping Thierry, can you have a look at this series? It is quite similar to the same change you merged for panel-simple (although I cannot see it in -next neither).
I think Jingoo can help to review this as well. Jingoo, can you help to review. Actually it looks good to me.
-Bryan
Quoted 26 lines · Alexandre Courbot
Quoted 25 lines
These two patches initiate the switch of the pwm-backlight driver to the gpiod GPIO interface, as it considerably simplifies the code.
For compatibility with current users of the driver, it is still possible to pass the enable GPIO number as platform data. Two platforms are still relying on this feature (pxa/palmtc and shmobile/armadillo800eva) which will be removed as soon as its last users are switched to GPIO mapping tables.
Alexandre Courbot (2):
ARM: SAMSUNG: remove gpio flags in dev-backlight
pwm-backlight: switch to gpiod interfacearch/arm/plat-samsung/dev-backlight.c | 2 - drivers/video/backlight/pwm_bl.c | 72 +++++++++++++++-------------------- include/linux/pwm_backlight.h | 5 +-- 3 files changed, 32 insertions(+), 47 deletions(-)--
1.9.0--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 8 lines · Bryan Wu
Quoted 4 lines · Alexandre Courbot
Ping Thierry, can you have a look at this series? It is quite similar to the same change you merged for panel-simple (although I cannot see it in -next neither).
I think Jingoo can help to review this as well. Jingoo, can you help to review. Actually it looks good to me.
Sorry, I cannot review this pwm-backlight code, I don't have knowledge about pwm-backlight and gpiod. I think that Thierry will review this correctly.
Best regards,
Jingoo Han
Quoted 24 lines
-Bryan
Quoted 21 lines · Alexandre Courbot
Quoted 20 lines
These two patches initiate the switch of the pwm-backlight driver to the gpiod GPIO interface, as it considerably simplifies the code.
For compatibility with current users of the driver, it is still possible to pass the enable GPIO number as platform data. Two platforms are still relying on this feature (pxa/palmtc and shmobile/armadillo800eva) which will be removed as soon as its last users are switched to GPIO mapping tables.
Alexandre Courbot (2):
ARM: SAMSUNG: remove gpio flags in dev-backlight
pwm-backlight: switch to gpiod interfacearch/arm/plat-samsung/dev-backlight.c | 2 - drivers/video/backlight/pwm_bl.c | 72 +++++++++++++++-------------------- include/linux/pwm_backlight.h | 5 +-- 3 files changed, 32 insertions(+), 47 deletions(-)--
1.9.0