Skip to contentSkip to conversation

Tritech ???

DISCUSSION [A]ndy80 3 participants 3 messages Sep 24, 2001

lore
Share & tools
lore

[A]ndy80

author
#0 lore raw

Hello, this is my kernel configuration about SOUND:

#
Sound # CONFIG_SOUND=y
# CONFIG_SOUND_BT878 is not
set

CONFIG_SOUND_EMU10K1=y

I ONLY enable EMU10K1 but, during boot I see:

Creative EMU10K1 PCI Audio Driver, version 0.15, 20:31:39 Sep 24 2001
PCI: Found IRQ 10 for device 00:11.0
emu10k1: EMU10K1 rev 6 model 0x8027 found, IO at 0xe000-0xe01f, IRQ 10
ac97_codec: AC97 codec, id: 0x5452:0x4123 (TriTech TR?????)

why does kernel load that module?

Signature · 8 lines
   ~            Piccoli Software
  ° °	http://www.piccolisoftware.cjb.net
  /V\      [email protected]
 // \\
/(   )\  [A]ndy80 on #bluvertigo e #pistoia
 ^`~'^  [email protected] - http://www.ptlug.org

GPG Key: http://www.ptlug.org/andy80_key.asc
#1 lore raw
Quoted 8 lines · On Mon, 2001-09-24 at 15:34, [A]ndy80 wrote:

I ONLY enable EMU10K1 but, during boot I see:

Creative EMU10K1 PCI Audio Driver, version 0.15, 20:31:39 Sep 24 2001
PCI: Found IRQ 10 for device 00:11.0
emu10k1: EMU10K1 rev 6 model 0x8027 found, IO at 0xe000-0xe01f, IRQ 10
ac97_codec: AC97 codec, id: 0x5452:0x4123 (TriTech TR?????)

why does kernel load that module?

It doesn't, that is what the AC97 is identifying your mixer as. It's harmless. It may even be right.

Signature · 3 lines
Robert M. Love
rml at ufl.edu
rml at tech9.net
#2 lore raw
In reply to [A]ndy80
Quoted 4 lines

emu10k1: EMU10K1 rev 6 model 0x8027 found, IO at 0xe000-0xe01f, IRQ 10
ac97_codec: AC97 codec, id: 0x5452:0x4123 (TriTech TR?????)

why does kernel load that module?

It has a tritech AC97 codec