sysctl interface to bootflags?
As I've said, I think it would be nice to have /proc control over two boot flags: the DIAG bit (which switches on (1) and off (0) the BIOS diagnostics) and the PnP-OS bit (which switches on (0) and off (1) PnP BIOS device configuration).
Would it be a good idea to do this using the sysctl infrastructure? If so, can someone please suggest an appropriate pathname for the flag files? How about "/proc/sys/BIOS/bootflags/diagnostics" and "/proc/sys/BIOS/bootflags/PnP-OS" ?
If this is a bad idea, someone please stop me before I waste my time implementing it.
--
Thomas
Quoted 4 lines
Would it be a good idea to do this using the sysctl infrastructure? If so, can someone please suggest an appropriate pathname for the flag files? How about "
/proc/sys/BIOS/bootflags/diagnostics" and "/proc/sys/BIOS/bootflags/PnP-OS" ?
Userspace can already do it via /dev/nvram
Quoted 1 line · Alan Cox
Userspace can already do it via
/dev/nvram
I see. Good.
I think that it would be helpful if the title for this feature in the kernel configuration menu was something more explanatory than "/dev/nvram support". I thought this had something to do with video RAM!
Cheers
Thomas
Quoted 6 lines · Thomas Hood
Would it be a good idea to do this using the sysctl infrastructure? If so, can someone please suggest an appropriate pathname for the flag files? How about "
/proc/sys/BIOS/bootflags/diagnostics" and "/proc/sys/BIOS/bootflags/PnP-OS" ?
If this is a bad idea, someone please stop me before I waste my time implementing it.
Last week, I pointed you at http://www.codemonkey.org.uk/sbf.c
Can you give a reason why this needs to be done in kernel space ?
regards,
Dave.
Signature · 2 lines
| Dave Jones. http://www.suse.de/~davej | SuSE Labs
Hi. I looked at your code and I saw that it depended on ACPI. Since ACPI doesn't work on my machine, I thought I should look for another solution. However, Alan now tells me that what I want to do can already be done via /dev/nvram.
Thanks to both of you.
Thomas
Quoted 15 lines · Dave Jones
Quoted 6 lines · Thomas Hood
Would it be a good idea to do this using the sysctl infrastructure? If so, can someone please suggest an appropriate pathname for the flag files? How about "
/proc/sys/BIOS/bootflags/diagnostics" and "/proc/sys/BIOS/bootflags/PnP-OS" ?
If this is a bad idea, someone please stop me before I waste my time implementing it.Last week, I pointed you at http://www.codemonkey.org.uk/sbf.c
Can you give a reason why this needs to be done in kernel space ?regards,
Dave.
Quoted 3 lines · Thomas Hood
Hi. I looked at your code and I saw that it depended on ACPI. Since ACPI doesn't work on my machine, I thought I should look for another solution. However,
Huh ? Read the code again.
Its no more dependant upon ACPI than bootflag.c is. The bootflag is pointed at by an ACPI table. The code I wrote functions /exactly/ the same on a kernel with APM, ACPI or NO power management.
Quoted 2 lines
Alan now tells me that what I want to do can already be done via
/dev/nvram.
My code _is_ using /dev/nvram !
regards,
Dave.
Signature · 2 lines
| Dave Jones. http://www.suse.de/~davej | SuSE Labs
Sorry, I didn't read your code very carefully before because I thought it relied on ACPI. Now I understand it better. It doesn't use /dev/nvram, but /dev/mem.
Here's what happens when I run it.
jdthood@thanatos:~/src/sbf$ gcc sbf.c jdthood@thanatos:~/src/sbf$ su Password: root@thanatos:/home/jdthood/src/sbf# gdb -q ./a.out (no debugging symbols found)...(gdb) run Starting program: /mnt/p/home/jdthood/src/sbf/./a.out BOOT @ 0x07fd0040 CMOS register:51 (no debugging symbols found)...(no debugging symbols found)... Program received signal SIGSEGV, Segmentation fault. 0x80489be in outb_p ()
--
Thomas
Quoted 25 lines · Dave Jones
Quoted 3 lines · Thomas Hood
Hi. I looked at your code and I saw that it depended on ACPI. Since ACPI doesn't work on my machine, I thought I should look for another solution. However,
Huh ? Read the code again.
Its no more dependant upon ACPI thanbootflag.cis. The bootflag is pointed at by an ACPI table. The code I wrote functions /exactly/ the same on a kernel with APM, ACPI or NO power management.Quoted 2 lines
Alan now tells me that what I want to do can already be done via
/dev/nvram.My code _is_ using
/dev/nvram!regards,
Dave.
Signature · 2 lines
| Dave Jones. http://www.suse.de/~davej | SuSE Labs
Quoted 3 lines · Thomas Hood
jdthood@thanatos:~/src/sbf$ gcc sbf.c Program received signal SIGSEGV, Segmentation fault. 0x80489be in outb_p ()
outb doesn't work unless you compile with -O2 iirc.
regards,
Dave.
Signature · 2 lines
| Dave Jones. http://www.suse.de/~davej | SuSE Labs
jdthood@thanatos:~/src/sbf$ gcc -O2 sbf.c jdthood@thanatos:~/src/sbf$ su Password: root@thanatos:/home/jdthood/src/sbf# l ./ ../ a.out* sbf.c root@thanatos:/home/jdthood/src/sbf# ./a.out BOOT @ 0x07fd0040 CMOS register:51 Segmentation fault
:(
Thomas
Quoted 16 lines · Dave Jones
Quoted 3 lines · Thomas Hood
jdthood@thanatos:~/src/sbf$ gcc sbf.c Program received signal SIGSEGV, Segmentation fault. 0x80489be in outb_p ()outb doesn't work unless you compile with -O2 iirc.
regards,
Dave.
Signature · 2 lines
| Dave Jones. http://www.suse.de/~davej | SuSE Labs
Quoted 2 lines · Thomas Hood
jdthood@thanatos:~/src/sbf$ gcc -O2 sbf.c Segmentation fault
Ok, I managed to repeat this here. Fortunatly, the pending fixes from Randy Dunlap include a fix for this. Updated version at http://www.codemonkey.org.uk/cruft/
(including a version with the /dev/nvram using interface which got dropped for reasons I don't recall).
regards,
Dave.
Signature · 2 lines
| Dave Jones. http://www.suse.de/~davej | SuSE Labs