Skip to contentSkip to conversation

VGA out on ibook2

DISCUSSION EliuG 2 participants 2 messages Oct 12, 2001

lore
Share & tools
lore

EliuG

author
#0 lore raw

Hi
I'm trying to use the external VGA connector on an ibook2 (the white
one) with the benh utility m3mirror and, after turning crt on, the screen on the monitor looks "wavy" and unusable.
Anybody could guide me to solve this problem?

Also... anybody knows how to turn up the composite video output of the ibook2?

Thanks a lot!
--
Félix Ortega Hortiguela <[email protected]>
Avoid the gates of hell -- Use Linux!

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#1 lore raw
Quoted 5 lines

I'm trying to use the external VGA connector on an ibook2 (the white
one) with the benh utility m3mirror and, after turning crt on, the screen on the monitor looks "wavy" and unusable.
Anybody could guide me to solve this problem?

Dump the CRTC and CRTC2 registers (come to think of it, dump any of the interesting registers). Compare with what you get after using MockOS to set up the VGA display and booting with video=ofonly.

Use a scope to verify there is a hsync signal (I suspect it might not be generated, or it's way out of spec.

Quoted 2 lines

Also... anybody knows how to turn up the composite video output of the ibook2?

Apple knows. Examine their drivers.

Michael

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/