Skip to contentSkip to conversation

Weird TS Stream from DMX_SET_PES_FILTER

DISCUSSION Bob Ingraham 2 participants 2 messages Mar 19, 2009 – Mar 20, 2009 1 message not in the archive Media (V4L/DVB)

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): 1519873602.105111237502250958.JavaMail.root@email

#1 lore raw

Hello,

I've been using the Linux DVB API to grab DBV-S MPEG2 video packets using a TechniSat S2 card.

But something seems odd about DMX_SET_PES_FILTER.

It returns a TS packets for my pid just fine, but by MPEG2 frames have no PES headers! The raw compressed MPEG2 frames just immediately follow the TS/adapation-field headers directly.

When I wrote my TS packet decoder, I was expecting to have to decode PES headers after the TS header. But instead I found the raw compressed frames.

They decode fine (with ffmpeg's libavcodec mpeg2 decoder,) and they look fine when rendered using SDL.

But besides my own program, I can't get vlc or mplayer to decode this stream. Both vlc and mplayer sense a TS stream, but then they never render anything because, I suspect, that they can't find PES headers.

So, two questions:

1. Am I crazy or is DMX_SET_PES_FILTER returning a non-standard TS stream?

2. Is there a way to receive a compliant MPEG-TS (or MPEG2-PS,) stream?

3. Should I use DMX_SET_FILTER instead?

4. If so, what goes in the filter/mask members of the dmx_filter_t struct?

Thanks,
Bob

PS: I use the following to filter on my video stream pid (0x1344):

struct dmx_pes_filter_params f;

memset(&f, 0, sizeof(f));
f.pid = (uint16_t) pid;
f.input = DMX_IN_FRONTEND;
f.output = DMX_OUT_TS_TAP;
f.pes_type = DMX_PES_OTHER;
f.flags = DMX_IMMEDIATE_START;

#2 lore raw
Quoted 30 lines · Bob Ingraham

Hello,

I've been using the Linux DVB API to grab DBV-S MPEG2 video packets using a TechniSat S2 card.

But something seems odd about DMX_SET_PES_FILTER.

It returns a TS packets for my pid just fine, but by MPEG2 frames have no PES headers! The raw compressed MPEG2 frames just immediately follow the TS/adapation-field headers directly.

When I wrote my TS packet decoder, I was expecting to have to decode PES headers after the TS header. But instead I found the raw compressed frames.

They decode fine (with ffmpeg's libavcodec mpeg2 decoder,) and they look fine when rendered using SDL.

But besides my own program, I can't get vlc or mplayer to decode this stream. Both vlc and mplayer sense a TS stream, but then they never render anything because, I suspect, that they can't find PES headers.

So, two questions:

1. Am I crazy or is DMX_SET_PES_FILTER returning a non-standard TS stream?

2. Is there a way to receive a compliant MPEG-TS (or MPEG2-PS,) stream?

3. Should I use DMX_SET_FILTER instead?

4. If so, what goes in the filter/mask members of the dmx_filter_t struct?

Thanks,
Bob

PS: I use the following to filter on my video stream pid (0x1344):

Quoted 10 lines

struct dmx_pes_filter_params f;

memset(&f, 0, sizeof(f));
f.pid = (uint16_t) pid;
f.input = DMX_IN_FRONTEND;
f.output = DMX_OUT_TS_TAP;
f.pes_type = DMX_PES_OTHER;
f.flags = DMX_IMMEDIATE_START;

Hello,
I use exactly the same parameters and I get a raw mpeg2-TS stream (ie packet of 188 bytes with the TS headers as defined in the mpeg2-ts norm)

If you want your stream to be read with VLC you need also the PAT and the PMT pids. If you want the sound you'll need also the PCR pid.

I don't know how to get the PES headers

Hope this information will help you

Regards

Signature · 1 line
Brice