Skip to contentSkip to conversation

VGA out on ibook2

DISCUSSION Félix Ortega 2 participants 2 messages Oct 14, 2001 – Oct 18, 2001

lore
Share & tools
lore
#0 lore raw

En sáb, 2001-10-13 a 13:05, Michel Dänzer escribio:
[...]

Quoted 1 line

Do you use Option "UseFBDev" in X?

Yes. I'm using Ati driver 16bit depth with the option UseFBDev, PanelWidth 1024 and PanelHeigth 768.
The behaviour of the vga out it's a little strange. If I boot without the external monitor conected, when I turn on external monitor with m3mirror, I have the "wavy" image I described in the other message. But if I boot with the external monitor connected, from OpenFirmware I have external monitor and when I boot I have a cuasi-perfect text console and an X console like if it's on another depth. If I put the X Server at 8 bit depth, I can see almost perfect picture (the colors are wrong). If I put 16 or 24 bit, I have a "dual" screen, the screen divided in planes so if I move the cursor across the middle of the screen, the cursor in the external monitor exits right and enter left. If I switch back to the text console, everything is ok.
I have tried with Ati Xfree and with FrameBuffer X, with the same results.
I have dumped the struct aty128_crtc with printk's in the function aty128_set_crt_enable, and it has allways the same values. I'm a little confused because is the first time I try to tweak a driver, anyone can help me?
Sorry my poor english, please....
--
Félix Ortega Hortiguela <[email protected]>
Avoid the gates of hell -- Use Linux!

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#1 lore raw
Quoted 4 lines · Félix Ortega

En sáb, 2001-10-13 a 13:05, Michel Dänzer escribio:
[...]

Quoted 1 line

Do you use Option "UseFBDev" in X?

Quoted 15 lines

Yes. I'm using Ati driver 16bit depth with the option UseFBDev, PanelWidth 1024 and PanelHeigth 768.
The behaviour of the vga out it's a little strange. If I boot without the external monitor conected, when I turn on external monitor with m3mirror, I have the "wavy" image I described in the other message. But if I boot with the external monitor connected, from OpenFirmware I have external monitor and when I boot I have a cuasi-perfect text console and an X console like if it's on another depth. If I put the X Server at 8 bit depth, I can see almost perfect picture (the colors are wrong). If I put 16 or 24 bit, I have a "dual" screen, the screen divided in planes so if I move the cursor across the middle of the screen, the cursor in the external monitor exits right and enter left. If I switch back to the text console, everything is ok.
I have tried with Ati Xfree and with FrameBuffer X, with the same results.

Sounds like an aty128fb bug then.

--
Earthling Michel Dänzer (MrCooper)/ Debian GNU/Linux (powerpc) developer
XFree86 and DRI project member / CS student, Free Software enthusiast

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/