2.4.17 freezes
Hi,
The mailing-list archive contains some reports of 2.4.17 freezes or crashes in the context of specific hardware configuration, such as SCSI+ATA and UDMA66 or RAID. In my office however, I had three PCs running 2.4.17 from the Debian woody distribution, all of them PentiumIII 82371AB PIIX4 chipset but otherwise without anything fancy.
One of those PCs has a SCSI DAT connected to its motherboard builtin Adaptec aic7890 SCSI adapter. This PC runs Amanda to backup the three PCs 2 times a week on a 10Mbits half-duplex LAN.
Everytime amanda ran (under 2.4.17), at least one of the PCs froze completely (without any trace in the logs): unreachable through network, black screen and no keyboard response. And sometimes, one of them froze during normal day usage.
First, I thought of an ATA DMA or SCSI problem and thus configured one of the PCs' ATA interface in default PIO, 16 bits transfers mode. It froze as well.
Hope this can help tracking the problem down or at least save some time to people with a similar situation,
Robin
Quoted 7 lines · Robin Farine
Hi,
The mailing-list archive contains some reports of 2.4.17 freezes or crashes in the context of specific hardware configuration, such as SCSI+ATA and UDMA66 or RAID. In my office however, I had three PCs running 2.4.17 from the Debian woody distribution, all of them PentiumIII 82371AB PIIX4 chipset but otherwise without anything fancy.
The freezing machines all have RAID-1 and fast CPUs and a lot (500-1000 MB) memory ? .. and are SMP ?
...
Quoted 2 lines
Hope this can help tracking the problem down or at least save some time to people with a similar situation,
I reported on this two months ago, and a month ago I figured out that non-SMP kernel works just fine (although the other CPU at my SMP machine now idles...)
Since then I have had to move the machine into location where I can't poke at it daily, and thus I can't test the thing now.
Quoted 1 line
Robin
/Matti Aarnio
On Thu, 2002-02-07 at 16:13, Matti Aarnio wrote:
[snip]
Quoted 4 lines
The freezing machines all have RAID-1 and fast CPUs and a lot (500-1000 MB) memory ? .. and are SMP ?
...
No, basic hardware configurations (no RAID, no SMP):
* 450Mzh Pentium III (512KB L2 cache), 64MB SDRAM
* 450Mzh Pentium III (512KB L2 cache), 256MB SDRAM
* 650Mzh Pentium III (256KB L2 cache), 256MB SDRAM[snip]
Quoted 1 line
/Matti Aarnio
Robin
Quoted 6 lines · Robin Farine
On Thu, 2002-02-07 at 16:13, Matti Aarnio wrote:
[snip]Quoted 3 lines
The freezing machines all have RAID-1 and fast CPUs and a lot (500-1000 MB) memory ? .. and are SMP ?
...
Quoted 6 lines
No, basic hardware configurations (no RAID, no SMP):
* 450Mzh Pentium III (512KB L2 cache), 64MB SDRAM * 450Mzh Pentium III (512KB L2 cache), 256MB SDRAM * 650Mzh Pentium III (256KB L2 cache), 256MB SDRAM[snip]
Huh ? EXT3 ?
Quoted 2 lines
Quoted 1 line
/Matti Aarnio
Robin
/Matti Aarnio
On Thu, 2002-02-07 at 17:03, Matti Aarnio wrote:
[snip]
Quoted 3 lines
Huh ? EXT3 ?
No, no :) plain old ext2.
[snip]
Quoted 1 line
/Matti Aarnio
Robin