2.4.17: oops in kapm-idled? (on IBM Thinkpad A30P [2653-66U])
Quoted 2 lines
Trying to suspend my A30P, the screen goes black, and then about a second later, I have this on the console (and syslog of course):
[...]
Quoted 2 lines
EIP: 0010:[<f882a876>] Tainted: PF
What kernel modules do you have loaded when this happens?
Quoted 6 lines
Quoted 2 lines
Trying to suspend my A30P, the screen goes black, and then about a second later, I have this on the console (and syslog of course):
[...]
Quoted 2 lines
EIP: 0010:[<f882a876>] Tainted: PF
What kernel modules do you have loaded when this happens?
These:
beh@berenium:~ $ /sbin/lsmod
Module Size Used by Tainted: PF
snd-card-intel8x0 8288 0
snd-pcm-oss 34944 0 (unused)
snd-mixer-oss 8864 0 [snd-pcm-oss]
snd-pcm 45760 0 [snd-card-intel8x0 snd-pcm-oss]
snd-timer 9760 0 [snd-pcm]
snd-ac97-codec 22720 0 [snd-card-intel8x0]
snd 23368 0 [snd-card-intel8x0 snd-pcm-oss snd-mixer-oss snd-pcm snd-timer snd-ac97-codec]
soundcore 3268 3 [snd]
xsvc 21864 2 (autoclean)
vmnet 18016 6
vmmon 18228 0 (unused)
ds 6368 2
yenta_socket 8384 2
pcmcia_core 37568 0 [ds yenta_socket]
nfsd 64768 1 (autoclean)
lockd 46624 1 (autoclean) [nfsd]
sunrpc 57428 1 (autoclean) [nfsd lockd]
dummy 960 0 (unused)
e100 60228 1
beh@berenium:~ $ su -
Note:
snd-* -> ALSA 0.9.0beta9 e100 -> EtherExpress Pro driver from Intel, compiled from the debian e100-source package xsvc -> Summit (Accelerated X) driver The problem also occurs without it; Just trying Accelerated X since I can't get agpgart+XFree86+DRI to run... agpgart fails on modprobe... :/ vmnet/vmmon -> VMware 3.0 pcmcia stuff -> pcmcia-cs-3.1.31
Hope this helps...
Benedikt
BEAUTY, n. The power by which a woman charms a lover and terrifies a
husband.
(Ambrose Bierce, The Devil's Dictionary)
Quoted 10 lines
snd-* -> ALSA 0.9.0beta9 e100 -> EtherExpress Pro driver from Intel, compiled from the debian e100-source package xsvc -> Summit (Accelerated X) driver The problem also occurs without it; Just trying Accelerated X since I can't get agpgart+XFree86+DRI to run... agpgart fails on modprobe... :/ vmnet/vmmon -> VMware 3.0 pcmcia stuff -> pcmcia-cs-3.1.31
Is there a reason for using all this non standard stuff. Can you reproduce the problem if you don't load ALSA (I dont think alsa is prime candidate here) and you've never loaded either vmware or xsvc or the non kernel pcmcia since boot ?
Obviously try with a few of them out and see - I've seen several vmware with new apm code interactions for one , although none of the others were oopses
Quoted 3 lines
Is there a reason for using all this non standard stuff. Can you reproduce the problem if you don't load ALSA (I dont think alsa is prime candidate here)
*smile*
Apparently, that's where you're wrong... I tried removing some modules, until I found the one causing the trouble:
snd-card-intel8x0
... :(
I guess it's time to check for newer version on that... :/
On another question, is there a way to find out a hardware config - I can't switch off all individual devices in the notebook, but if I use the prism2 driver from linux-wlan.com, I can't get the full performance out of it - but just something like ~20kb/s throughput in ftp (Win2K gets more than 500kb/s)...
Some people on the linux-wlan mailing list suggested, it might be a hardware conflict, but they couldn't give me a better idea on HOW to locate it...
Any clue, how I could go about that?
Benedikt
BEAUTY, n. The power by which a woman charms a lover and terrifies a
husband.
(Ambrose Bierce, The Devil's Dictionary)
Quoted 5 lines · Benedikt Heinen
Apparently, that's where you're wrong... I tried removing some modules, until I found the one causing the trouble:
snd-card-intel8x0
I guess it's time to check for newer version on that... :/
ALSA device drivers have routines that save and restore the state of sound chips across suspend & resume. That's where I'd go a-hunting for bugs.
Quoted 4 lines
I can't switch off all individual devices in the notebook, but if I use the prism2 driver from linux-wlan.com, I can't get the full performance out of it - but just something like ~20kb/s throughput in ftp (Win2K gets more than 500kb/s)...
What happens if you use the in kernel pcmcia, and the in kernel prism chipset drivers ?
Quoted 6 lines
Quoted 4 lines
I can't switch off all individual devices in the notebook, but if I use the prism2 driver from linux-wlan.com, I can't get the full performance out of it - but just something like ~20kb/s throughput in ftp (Win2K gets more than 500kb/s)...
What happens if you use the in kernel pcmcia, and the in kernel prism chipset drivers ?
The in-kernel prism driver doesn't seem to work with the built-in wireless lan. But - from what I understand from the Configure.help, this is what I'd expect - to me it looks like, linux will support prism2 in either PCMCIA or PLX.
Quoted 1 line
From the linux-wlan-ng driver, I need to compile "Prism2.5 native
PCI" to get a driver that will recognize the card...
Benedikt
BEAUTY, n. The power by which a woman charms a lover and terrifies a
husband.
(Ambrose Bierce, The Devil's Dictionary)