ymfpci : four speakers with OSS-emulation
Sure Adam, but according to http://www.mail-archive.com/alsa-
[email protected]/msg01977.html , there is a solution. The solution with the option for snd-pcm-oss doesn't work, but at this message
http://www.mail-archive.com/[email protected]/msg01987.html , Jaroslav have given you an another solution. Does it work ?
Thank you.
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
The solution the Jaroslav gave in that e-mail actually requires changes to the ymfpci driver, as I understand it. Last time I pulled code from CVS, this hadn't been done yet. From the sound of it (based on your experience) it looks like it still hasn't been done. At the moment, I don't really understand Alsa (or sound drivers in general) well enough to make the change myself, nor do I really have the time to pick up that knowledge at the moment.
However, it's also my impression from Jaroslav's explanation that this would simply duplicate the output from the fron channel on the rear channel. Can someone let me know if this is correct?
Adam
Quoted 7 lines · On Wed, 13 Mar 2002 [email protected] wrote:
Sure Adam, but according to http://www.mail-archive.com/alsa-
[email protected]/msg01977.html , there is a solution. The solution with the option for snd-pcm-oss doesn't work, but at this message
http://www.mail-archive.com/[email protected]/msg01987.html , Jaroslav have given you an another solution. Does it work ?
Thank you.
Quoted 5 lines
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
At Wed, 13 Mar 2002 08:01:02 -0500 (EST),
Quoted 9 lines · Adam K Kirchhoff
The solution the Jaroslav gave in that e-mail actually requires changes to the ymfpci driver, as I understand it. Last time I pulled code from CVS, this hadn't been done yet. From the sound of it (based on your experience) it looks like it still hasn't been done. At the moment, I don't really understand Alsa (or sound drivers in general) well enough to make the change myself, nor do I really have the time to pick up that knowledge at the moment.
Quoted 3 lines
However, it's also my impression from Jaroslav's explanation that this would simply duplicate the output from the fron channel on the rear channel. Can someone let me know if this is correct?
if you only need duplication, this can be done on alsa-lib without changing the driver itself.
try to add the following in your ~/.asoundrc.
pcm.ch4dup {
type plug
slave.pcm surround40
ttable.0.0 1
ttable.1.1 1
ttable.0.2 1
ttable.1.3 1
}then run like this
% aplay -D ch4dup foo.wav
To use this technique on OSS emulation, you'll need aoss wrapper (included in alsa-oss package).
suppose that the application uses /dev/dsp, add the following in ~/.asoundrc.
pcm.dsp0 pcm.ch4dup
then run your oss application via aoss script
% aoss foobar
Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Quoted 11 lines · Takashi Iwai
At Wed, 13 Mar 2002 08:01:02 -0500 (EST),
Quoted 9 lines · Adam K Kirchhoff
The solution the Jaroslav gave in that e-mail actually requires changes to the ymfpci driver, as I understand it. Last time I pulled code from CVS, this hadn't been done yet. From the sound of it (based on your experience) it looks like it still hasn't been done. At the moment, I don't really understand Alsa (or sound drivers in general) well enough to make the change myself, nor do I really have the time to pick up that knowledge at the moment.
Quoted 6 lines
Quoted 3 lines
However, it's also my impression from Jaroslav's explanation that this would simply duplicate the output from the fron channel on the rear channel. Can someone let me know if this is correct?
if you only need duplication, this can be done on alsa-lib without changing the driver itself.
<snip>
What would be required if you're looking for more than duplication?
Adam
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
At Wed, 13 Mar 2002 09:29:58 -0500 (EST),
Quoted 19 lines · Adam K Kirchhoff
Quoted 15 lines · Takashi Iwai
At Wed, 13 Mar 2002 08:01:02 -0500 (EST),
Quoted 12 lines · Adam K Kirchhoff
The solution the Jaroslav gave in that e-mail actually requires changes to the ymfpci driver, as I understand it. Last time I pulled code from CVS, this hadn't been done yet. From the sound of it (based on your experience) it looks like it still hasn't been done. At the moment, I don't really understand Alsa (or sound drivers in general) well enough to make the change myself, nor do I really have the time to pick up that knowledge at the moment.
However, it's also my impression from Jaroslav's explanation that this would simply duplicate the output from the fron channel on the rear channel. Can someone let me know if this is correct?
Quoted 6 lines
Quoted 2 lines
if you only need duplication, this can be done on alsa-lib without changing the driver itself.
<snip>
What would be required if you're looking for more than duplication?
dunno. depending on what you want ;)
for example, if you need dynamic volume/pan controls for each channel, then alsa-lib cannot do it. its routing function is static only.
Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Quoted 24 lines · Takashi Iwai
At Wed, 13 Mar 2002 09:29:58 -0500 (EST),
Quoted 22 lines · Adam K Kirchhoff
Quoted 17 lines · Takashi Iwai
At Wed, 13 Mar 2002 08:01:02 -0500 (EST),
Quoted 9 lines · Adam K Kirchhoff
The solution the Jaroslav gave in that e-mail actually requires changes to the ymfpci driver, as I understand it. Last time I pulled code from CVS, this hadn't been done yet. From the sound of it (based on your experience) it looks like it still hasn't been done. At the moment, I don't really understand Alsa (or sound drivers in general) well enough to make the change myself, nor do I really have the time to pick up that knowledge at the moment.
Quoted 3 lines
However, it's also my impression from Jaroslav's explanation that this would simply duplicate the output from the fron channel on the rear channel. Can someone let me know if this is correct?
if you only need duplication, this can be done on alsa-lib without changing the driver itself.
Quoted 7 lines
Quoted 3 lines
<snip>
What would be required if you're looking for more than duplication?
dunno. depending on what you want ;)
for example, if you need dynamic volume/pan controls for each channel, then alsa-lib cannot do it. its routing function is static only.
Well, this is largely what comes to mind (speaking as one who has a limited understanding of sound drivers)...
When playing mp3s with a SB Live (using the Alsa drivers) I'm quite certain that each channel, and each speaker on the channel, is outputting sound quite independent of the other speakers/channels. In other words, the left and right front speakers, and the left and right rear speakers are independent of each other. This also works when playing games such as UnrealTournament. You can tell whether someone is coming up behind you from the left or the right. Make sense so far?
Now, this also works with the ymfpci OSS drivers (the commercial ones, anyway) as well as the BeOS drivers for the card, so it doesn't seem to be a limitation of the hardware (though please correct me if I'm wrong).
Now, I'm going to assume here that the ymfpci driver would need some significant work to be able to do this, correct?
Adam
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Quoted 13 lines · Takashi Iwai
if you only need duplication, this can be done on alsa-lib without changing the driver itself.
try to add the following in your ~/.asoundrc.pcm.ch4dup { type plug slave.pcm surround40 ttable.0.0 1 ttable.1.1 1 ttable.0.2 1 ttable.1.3 1 }
Quoted 3 lines
then run like this
% aplay -D ch4dup foo.wav
Well, even this doesn't seem to want to work for me at the moment :-( I'm still only getting audio from the front speakers.
[ adamk@sorrow ~ ]$ cat .asoundrc
pcm.ch4dup {
type plug
slave.pcm surround40
ttable.0.0 1
ttable.1.1 1
ttable.0.2 1
ttable.1.3 1
}[ adamk@sorrow ~ ]$ aplay -D ch4dup saved/sounds/Thunder.wav
Playing WAVE 'saved/sounds/Thunder.wav' : Signed 16 bit Little Endian, Rate 22050 Hz, Stereo
Any further ideas?
Adam
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
At Tue, 13 Mar 2001 17:57:14 -0500 (EST),
Quoted 34 lines · Adam K Kirchhoff
Quoted 13 lines · Takashi Iwai
if you only need duplication, this can be done on alsa-lib without changing the driver itself.
try to add the following in your ~/.asoundrc.pcm.ch4dup { type plug slave.pcm surround40 ttable.0.0 1 ttable.1.1 1 ttable.0.2 1 ttable.1.3 1 }Quoted 3 lines
then run like this
% aplay -D ch4dup foo.wav
Well, even this doesn't seem to want to work for me at the moment :-( I'm still only getting audio from the front speakers.
[ adamk@sorrow ~ ]$ cat .asoundrc
pcm.ch4dup { type plug slave.pcm surround40 ttable.0.0 1 ttable.1.1 1 ttable.0.2 1 ttable.1.3 1 }
Quoted 4 lines
[ adamk@sorrow ~ ]$ aplay -D ch4dup saved/sounds/Thunder.wav
Playing WAVE 'saved/sounds/Thunder.wav' : Signed 16 bit Little Endian, Rate 22050 Hz, StereoAny further ideas?
what shows with -v option?
can you hear from rear speakers when you play with -Drear ?
Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Quoted 7 lines · Takashi Iwai
what shows with -v option?
can you hear from rear speakers when you play with -Drear ?Takashi
Takashi,
My apologies, but for some reason I had "surround" muted in
alsamixer. Once I unmuted it, I *am* getting the duplicate sound on the rear speakers.
So now, is it likely that we'll see the ymfpci driver changed at
some point so that we can use both the front and rear speakers so that they don't duplicate each other (as I described in my message yesterday)? :-)
Adam
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Quoted 13 lines · Adam K Kirchhoff
Quoted 7 lines · Takashi Iwai
what shows with -v option?
can you hear from rear speakers when you play with -Drear ?Takashi
Takashi,
Quoted 8 lines
My apologies, but for some reason I had "surround" muted in
alsamixer. Once I unmuted it, I *am* getting the duplicate sound on the rear speakers.So now, is it likely that we'll see the ymfpci driver changed at
some point so that we can use both the front and rear speakers so that they don't duplicate each other (as I described in my message yesterday)? :-)
I guess that this is something I shouldn't expect to see from Alsa any time in the not-too-distant future unless I do it myself, then.
Does anyone have any tips or pointers they'd like to give on how one would go about adding this support to a driver?
Adam
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel