arm64: dts: rockchip: add rk3328-rock64 board

The ROCK64 is a credit card size 4K60P HDR Media Board Computer using the Rockchip RK3328 Quad-Core ARM Cortex A53 64-Bit Processor and supporting up to 4GB 1600MHz LPDDR3 memory. It provides eMMC module socket, MicroSD Card slot, Pi-2 Bus, Pi-P5+ Bus, USB 3.0 and many others peripheral devices interface for makers to integrate with sensors and devices.

The devicetree currently supports basic peripherals, with more to be added later on.

---
changes in v3:
- remove another forgotten obsolete mmc property
- remove sdio nodes (not actually used on the board)
- drop regulator mode properties, not specified for rk805 changes in v2:
- remove obsolete mmc properties found by Shawn
- enable newly added tsadc node

 Documentation/devicetree/bindings/arm/rockchip.txt |   4 +
 arch/arm64/boot/dts/rockchip/Makefile              |   1 +
 arch/arm64/boot/dts/rockchip/rk3328-rock64.dts     | 333 +++++++++++++++++++++
 3 files changed, 338 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-rock64.dts

index 88d95323d301..b54e9bfd9562 100644
@@ -134,6 +134,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
      - compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288";
 
+- Pine64 Rock64 board:
+    Required root node properties:
+    - compatible = "pine64,rock64", "rockchip,rk3328";
+
 - Rockchip PX3 Evaluation board:
     Required root node properties:
       - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";

index d0ad366bbd12..106fb8e0f2f8 100644
@@ -1,4 +1,5 @@
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb

2.14.1

Am Montag, 21. August 2017, 17:50:20 CEST schrieb Heiko Stuebner:

applied for 4.14