MPC8270 Custom Board: Stack Pointer Corruption

U-Boot-Users mss59 at att.net 2 participants 2 messages Oct 20, 2003

Share & tools

mss59 at att.net

author

2003-10-20 14:43 UTC #0 lore raw

I am working on an MPC8270 based custom board. u-boot is ported from EP8260 board version. RAM is 128M, flash is 16M.
After u-boot relocates code in the ram, sometimes, stack pointer gets corrupted. And sometimes, I get bus fault which overwirtes all u-boot area in the RAM with some pattern like this

bus fault
07f6bcd0 : 02001111 07f6be18 07f6bc68 11111111 ...........h.... 07f6bce0 : 42757320 4661756c 74204020 30782020 Bus Fault @ 0x 07f6bcf0 : 20202020 20202020 20202020 20202020
07f6bd00 : 20202020 20202020 20202020 20202020
07f6bd10 : 20202020 20202020 20202020 20202020
07f6bd20 : 20202020 20202020 20202020 20202020
07f6bd30 : 20202020 20202020 20202020 20202020
07f6bd40 : 20202020 20202020 20202020 20202020
07f6bd50 : 20202020 20202020 20202020 20202020
07f6bd60 : 20202020 20202020 20202020 20202020
07f6bd70 : 20202020 20202020 20202020 20202020
07f6bd80 : 20202020 20202020 20202020 20202020
07f6bd90 : 20202020 20202020 20202020 20202020
07f6bda0 : 20202020 20202020 20202020 20202020
07f6bdb0 : 20202020 20202020 20202020 20202020
07f6bdc0 : 20202020 20202020 20202020 20202020 ---> This patters is written till the end of ram.
BDImn8270>rd
GPR00: 00000000 07f6bbd0 ffdfffff 08000004
GPR04: 00000000 00000010 07f58a9d 00000007
GPR08: 00000001 00000000 00000000 00000007
GPR12: 00000020 00400000 07ffd000 080cc000
GPR16: fffdffff bffdffff ff7fffff fff7ef5f
GPR20: 48000002 07f6bad0 00000000 07fcf098
GPR24: 07f6bce0 00000001 07fecdbc 07f6bfb4
GPR28: 07f6bcee 07f6bf70 07ffdcb8 07ff2ed8
CR : 48000002 MSR: 00000000

Any ideas.....

Thanks

Ravi.

Wolfgang Denk

2003-10-20 20:32 UTC #1 lore raw

Quoted 5 lines · In message <[email protected]> you wrote:

I am working on an MPC8270 based custom board. u-boot is ported from EP8260 board version. RAM is 128M, flash is 16M.
After u-boot relocates code in the ram, sometimes, stack pointer gets corrupted. And sometimes, I get bus fault which overwirtes all u-boot area in the RAM with some pattern like this

Why do you post the same message _AGAIN_ just 3 hours after the first, identical message, to which I replied semi-immediately?

If you need IMMEDIATE help you can try and apply for commercial support, for which you will have to pay $$$$. If you kindly ask for free help, please try and be a _bit_ more patient!

Wolfgang Denk

Signature · 3 lines

Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
C++ is the best example of second-system effect since OS/360.