Audigy and FPS 5300 rear speakers problem
A message that is not in the archive (sent off-list or not yet received): [email protected]
At 22 May 2002 15:40:07 +0200,
Quoted 8 lines · Jean-François Morcillo
Hi,
I've just compiled alsa rc1 on my RH 7.3 box with a 2.4.18 kernel from kernel.org and a 3.04 gcc.
I used alsamixer to unmute all channel and tried different audio application but I can only hear weak sound on rear speakers, I didn't found how to turn them loud ?
Please help me,
did you adjust the "Wave Surround Rear" volume?
Takashi
_______________________________________________________________
Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 11 lines · Takashi Iwai
At 22 May 2002 15:40:07 +0200,
Quoted 8 lines · Jean-François Morcillo
Hi,
I've just compiled alsa rc1 on my RH 7.3 box with a 2.4.18 kernel from kernel.org and a 3.04 gcc.
I used alsamixer to unmute all channel and tried different audio application but I can only hear weak sound on rear speakers, I didn't found how to turn them loud ?
Please help me,
Quoted 1 line
did you adjust the "Wave Surround Rear" volume?
Yes I've set it at the maximum value but it didn't change anything Any others ideas ?
But what is exactly the status of this card ? is it totally supported ?
Jean-Francois
Quoted 5 lines
Takashi
_______________________________________________________________
Quoted 7 lines
Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
_______________________________________________________________
Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm
A message that is not in the archive (sent off-list or not yet received): [email protected]
At 22 May 2002 23:52:00 +0200,
Quoted 13 lines · [email protected] wrote:
Quoted 11 lines · Takashi Iwai
At 22 May 2002 15:40:07 +0200,
Quoted 8 lines · Jean-François Morcillo
Hi,
I've just compiled alsa rc1 on my RH 7.3 box with a 2.4.18 kernel from kernel.org and a 3.04 gcc.
I used alsamixer to unmute all channel and tried different audio application but I can only hear weak sound on rear speakers, I didn't found how to turn them loud ?
Please help me,
Quoted 3 lines
Quoted 1 line
did you adjust the "Wave Surround Rear" volume?
Yes I've set it at the maximum value but it didn't change anything
could you send me your /etc/asound.state?
Quoted 1 line
Any others ideas ?
try to remove /etc/asound.state once, reload the driver and configure the mixer status again.
Quoted 1 line
But what is exactly the status of this card ? is it totally supported ?
not totally.
but analog outputs and midi are working fine.
no digital i/o, no effects, no 24/96 support yet.
Takashi
_______________________________________________________________
Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm
A message that is not in the archive (sent off-list or not yet received): [email protected]
Le jeu 23/05/2002 à 10:49, Takashi Iwai a écrit :
(...)
Quoted 2 lines
could you send me your
/etc/asound.state?
I would be pleased to do so, but I don't have any /etc/asound.state file... May be I messed something ? I fact I haven't any asound.* file on my hard disk.... It seems to be wrong 'cause readind /etc/alsa.conf I saw a reference to a file named /etc/asound.conf...
Quoted 5 lines
Quoted 2 lines
Any others ideas ?
try to remove
/etc/asound.stateonce, reload the driver and configure the mixer status again.
It would be nice but as I didn't have such a file, it is difficult for me to delete it ;)
Is it possible that a previous install of alsa 0.9 can cause such a problem ?
Thanks again
Jean-Francois
_______________________________________________________________
Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm
At 23 May 2002 23:38:31 +0200,
Quoted 9 lines · [email protected] wrote:
Le jeu 23/05/2002 à 10:49, Takashi Iwai a écrit :
(...)Quoted 2 lines
could you send me your
/etc/asound.state?I would be pleased to do so, but I don't have any
/etc/asound.statefile... May be I messed something ? I fact I haven't any asound.* file on my hard disk.... It seems to be wrong 'cause readind/etc/alsa.confI saw a reference to a file named/etc/asound.conf...
/etc/asound.conf is the configuration for defining your own pcm or controls. /etc/asound.state is used to save and restore the status of mixer and controls.
it's a bit confusing, because /etc/asound.conf was used for the purpose of the present /etc/asound.state at the time of alsa 0.5.x. anyway, if you have /etc/asound.state, better to remove it.
Quoted 10 lines
Quoted 5 lines
Quoted 2 lines
Any others ideas ?
try to remove
/etc/asound.stateonce, reload the driver and configure the mixer status again.It would be nice but as I didn't have such a file, it is difficult for me to delete it ;)
Is it possible that a previous install of alsa 0.9 can cause such a problem ?
usually not. a possible problem may be the files under /usr/share/alsa directory...
anyway, can you once save your setting via "alsactl store" (as root) and send me the generated /etc/asound.state to analyze the configuration?
Takashi
_______________________________________________________________
Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm