Skip to contentSkip to conversation

arm64: dts: rockchip: add roc-rk3328-cc board

PATCH Superseded djw at t-chip.com.cn 4 participants 10 messages Jan 6, 2018 – Feb 2, 2018 1 message not in the archive

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: rockchip: add roc-rk3328-cc board

From: Levin Du <[email protected]>

The roc-rk3328-cc is a credit card size single board computer using the Rockchip RK3328 Quad-Core ARM Cortex A53 64-Bit Processor and supporting up to 2GB 2133MHz LPDDR4 memory. It provides eMMC module socket, MicroSD Card slot, USB 2.0/3.0, Gigabit Ethernet, HDMI/CVBS, Infrared Receiver, SPDIF/I2S, and SPI/I2C/UART/PWM interfaces.

The devicetree currently supports basic peripherals.

---
 Documentation/devicetree/bindings/arm/rockchip.txt |   4 +
 arch/arm64/boot/dts/rockchip/Makefile              |   1 +
 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts     | 313 +++++++++++++++++++++
 3 files changed, 318 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
Documentation/devicetree/bindings/arm/rockchip.txt +4 -0
index 326d24b..0f76a62 100644
@@ -50,6 +50,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
 
+- Firefly roc-rk3328-cc board:
+    Required root node properties:
+      - compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
+
 - ChipSPARK PopMetal-RK3288 board:
     Required root node properties:
       - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
arch/arm64/boot/dts/rockchip/Makefile +1 -0
index ce2701e..cf14b86 100644
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +313 -0

313 lines not on this page · raw message

Signature · 1 line
2.9.2
maintainer
#1 lore raw

PATCH 1/1 arm64: dts: rockchip: add roc-rk3328-cc board

Quoted 82 lines · djw at t-chip.com.cn

From: Levin Du <[email protected]>

The roc-rk3328-cc is a credit card size single board computer using the Rockchip RK3328 Quad-Core ARM Cortex A53 64-Bit Processor and supporting up to 2GB 2133MHz LPDDR4 memory. It provides eMMC module socket, MicroSD Card slot, USB 2.0/3.0, Gigabit Ethernet, HDMI/CVBS, Infrared Receiver, SPDIF/I2S, and SPI/I2C/UART/PWM interfaces.

The devicetree currently supports basic peripherals.

---
 Documentation/devicetree/bindings/arm/rockchip.txt |   4 +
 arch/arm64/boot/dts/rockchip/Makefile              |   1 +
 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts     | 313 +++++++++++++++++++++
 3 files changed, 318 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
Documentation/devicetree/bindings/arm/rockchip.txt +4 -0
index 326d24b..0f76a62 100644
@@ -50,6 +50,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
 
+- Firefly roc-rk3328-cc board:
+    Required root node properties:
+      - compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
+
 - ChipSPARK PopMetal-RK3288 board:
     Required root node properties:
       - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
arch/arm64/boot/dts/rockchip/Makefile +1 -0
index ce2701e..cf14b86 100644
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +31 -0
new file mode 100644
index 0000000..2134baf
@@ -0,0 +1,313 @@
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.

arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts line 41

Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +10 -0
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */

Use SPDX license tag.

arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts line 51

Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +10 -0
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+	model = "Firefly roc-rk3328-cc";
+	compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";

Just checking, 1.5Mbps for console?

Quoted 81 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +81 -0
+	};
+
+	gmac_clkin: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 30 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0m1_gpio>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb20_host_drv>;
+		regulator-name = "vcc_host1_5v";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins>;
+	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;

arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts line 142

Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +10 -0
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x25>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: rk805 at 18 {

pmic at 18

Quoted 12 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +12 -0
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;

arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts line 164

Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +10 -0
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {

Don't use '_' in node names.

Quoted 157 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +149 -0
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		usb20_host_drv: usb20-host-drv {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usbdrd3 {
+	status = "okay";
+};
+
+&usbdrd_dwc3 {
+	dr_mode = "host";
+	status = "okay";
+};
Signature · 7 lines
2.9.2


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
maintainer
#2 lore raw

PATCH 1/1 arm64: dts: rockchip: add roc-rk3328-cc board

Hi Rob,

Am Donnerstag, 11. Januar 2018, 14:30:33 CET schrieb Rob Herring:

Quoted 41 lines
Quoted 41 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +35 -0
new file mode 100644
index 0000000..2134baf
@@ -0,0 +1,313 @@
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
Quoted 8 lines

arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts line 41

Quoted 6 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +6 -0
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */

Use SPDX license tag.

It looks like Thomas' SPDX documentation patches are not yet merged and there were smaller protests about SPDX information only being available on some external website, so just for my understanding, SPDX is the agreed standard now, right?

And judging by the SPDX conversion for Rockchip dts I have in my inbox the correct tags should probably be

	// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

due to the
"All devicetrees claim to be either GPL or X11 while the actual license text is MIT. Therefore we use MIT for the SPDX tag as X11 is clearly wrong."

Quoted 4 lines
Quoted 4 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +4 -0
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
Quoted 8 lines

arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts line 51

Quoted 6 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +6 -0
+/ {
+	model = "Firefly roc-rk3328-cc";
+	compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";

Just checking, 1.5Mbps for console?

yep, that's correct. Most newer Rockchip socs drive the debug uart with 1.5MBps as default these days.

Quoted 23 lines

arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts line 142

Quoted 4 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +4 -0
+&i2c1 {
+	status = "okay";
+
+	rk805: rk805 at 18 {

pmic at 18

Quoted 16 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +16 -0
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
Quoted 8 lines

arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts line 164

Quoted 6 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +6 -0
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {

Don't use '_' in node names.

The driver binds against the node names including the underscores. (with regulator-compatible being deprecated)

See drivers/regulator/rk808-regulator.c and
Documentation/devicetree/bindings/mfd/rk808.txt

Heiko

maintainer
#3 lore raw

PATCH 1/1 arm64: dts: rockchip: add roc-rk3328-cc board

Quoted 53 lines · Heiko Stuebner

Hi Rob,

Am Donnerstag, 11. Januar 2018, 14:30:33 CET schrieb Rob Herring:

Quoted 41 lines
Quoted 41 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +35 -0
new file mode 100644
index 0000000..2134baf
@@ -0,0 +1,313 @@
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
Quoted 8 lines

arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts line 41

Quoted 6 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +6 -0
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */

Use SPDX license tag.

Quoted 4 lines

It looks like Thomas' SPDX documentation patches are not yet merged and there were smaller protests about SPDX information only being available on some external website, so just for my understanding, SPDX is the agreed standard now, right?

His series adds the license text for all the tags which Russell said addressed his concerns.

I think it is not yet merged mainly because Thomas has been busy with Spectre and Meltdown.

Quoted 8 lines

And judging by the SPDX conversion for Rockchip dts I have in my inbox the correct tags should probably be

        // SPDX-License-Identifier: (GPL-2.0+ OR MIT)

due to the
"All devicetrees claim to be either GPL or X11 while the actual license text is MIT. Therefore we use MIT for the SPDX tag as X11 is clearly wrong."

Right.

Quoted 32 lines
Quoted 23 lines

arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts line 142

Quoted 4 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +4 -0
+&i2c1 {
+   status = "okay";
+
+   rk805: rk805 at 18 {

pmic at 18

Quoted 16 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +16 -0
+           compatible = "rockchip,rk805";
+           reg = <0x18>;
+           interrupt-parent = <&gpio1>;
+           interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+           #clock-cells = <1>;
+           clock-output-names = "xin32k", "rk805-clkout2";
+           gpio-controller;
+           #gpio-cells = <2>;
+           pinctrl-names = "default";
+           pinctrl-0 = <&pmic_int_l>;
+           rockchip,system-power-controller;
+           wakeup-source;
+
+           vcc1-supply = <&vcc_sys>;
+           vcc2-supply = <&vcc_sys>;
+           vcc3-supply = <&vcc_sys>;
Quoted 8 lines

arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts line 164

Quoted 6 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +6 -0
+           vcc4-supply = <&vcc_sys>;
+           vcc5-supply = <&vcc_io>;
+           vcc6-supply = <&vcc_io>;
+
+           regulators {
+                   vdd_logic: DCDC_REG1 {

Don't use '_' in node names.

Quoted 2 lines

The driver binds against the node names including the underscores. (with regulator-compatible being deprecated)

Okay. You've probably told me that before (and will again next time I forget).

Rob

#4 lore raw

PATCH v2 1/1 arm64: dts: rockchip: add roc-rk3328-cc board

In reply to djw at t-chip.com.cn

From: Levin Du <[email protected]>

Hi all,
This version uses SPDX license tag.

The roc-rk3328-cc is a credit card size single board computer using the Rockchip RK3328 Quad-Core ARM Cortex A53 64-Bit Processor and supporting up to 2GB 2133MHz LPDDR4 memory. It provides eMMC module socket, MicroSD Card slot, USB 2.0/3.0, Gigabit Ethernet, HDMI/CVBS, Infrared Receiver, SPDIF/I2S, and SPI/I2C/UART/PWM interfaces.

The devicetree currently supports basic peripherals.

---
 Documentation/devicetree/bindings/arm/rockchip.txt |   4 +
 arch/arm64/boot/dts/rockchip/Makefile              |   1 +
 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts     | 276 +++++++++++++++++++++
 3 files changed, 281 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
Documentation/devicetree/bindings/arm/rockchip.txt +4 -0
index 326d24b..0f76a62 100644
@@ -50,6 +50,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
 
+- Firefly roc-rk3328-cc board:
+    Required root node properties:
+      - compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
+
 - ChipSPARK PopMetal-RK3288 board:
     Required root node properties:
       - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
arch/arm64/boot/dts/rockchip/Makefile +1 -0
index ce2701e..cf14b86 100644
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +276 -0

276 lines not on this page · raw message

Signature · 1 line
2.9.2

A message that is not in the archive (sent off-list or not yet received): 20180120095404.32117-1-djw-Efosm3t9Qi2Pt1CcHtbs0g@public.gmane.org

#6 lore raw

Hi Levin:

Quoted 79 lines · On 2018年01月20日 17:54, [email protected] wrote:

From: Levin Du <[email protected]>

Hi all,
This version uses SPDX license tag.

The roc-rk3328-cc is a credit card size single board computer using the Rockchip RK3328 Quad-Core ARM Cortex A53 64-Bit Processor and supporting up to 2GB 2133MHz LPDDR4 memory. It provides eMMC module socket, MicroSD Card slot, USB 2.0/3.0, Gigabit Ethernet, HDMI/CVBS, Infrared Receiver, SPDIF/I2S, and SPI/I2C/UART/PWM interfaces.

The devicetree currently supports basic peripherals.

---
  Documentation/devicetree/bindings/arm/rockchip.txt |   4 +
  arch/arm64/boot/dts/rockchip/Makefile              |   1 +
  arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts     | 276 +++++++++++++++++++++
  3 files changed, 281 insertions(+)

create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts

Documentation/devicetree/bindings/arm/rockchip.txt +4 -0
index 326d24b..0f76a62 100644
@@ -50,6 +50,10 @@ Rockchip platforms device tree bindings
      Required root node properties:
        - compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
 
+- Firefly roc-rk3328-cc board:
+    Required root node properties:
+      - compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
+
  - ChipSPARK PopMetal-RK3288 board:
      Required root node properties:
        - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
arch/arm64/boot/dts/rockchip/Makefile +1 -0
index ce2701e..cf14b86 100644
@@ -1,6 +1,7 @@
  # SPDX-License-Identifier: GPL-2.0
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +25 -0
new file mode 100644
index 0000000..f055c74
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+	model = "Firefly roc-rk3328-cc";
+	compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac_clkin: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";

arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts line 35

Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +10 -0
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 30 GPIO_ACTIVE_LOW>;

    Please use macro definition RK_PD6 in dt-bindings/pinctrl/rockchip.h here.

Quoted 64 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +64 -0
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0m1_gpio>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb20_host_drv>;
+		regulator-name = "vcc_host1_5v";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins>;
+	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x25>;
+	rx_delay = <0x11>;
+	status = "okay";

arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts line 109

Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +10 -0
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: rk805@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;

    RK_PD0

Quoted 157 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +157 -0
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		usb20_host_drv: usb20-host-drv {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";

arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts line 276

Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +10 -0
+};
+
+&usbdrd3 {
+	status = "okay";
+};
+
+&usbdrd_dwc3 {
+	dr_mode = "host";
+	status = "okay";
+};

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

maintainer
#7 lore raw

PATCH v2 1/1 arm64: dts: rockchip: add roc-rk3328-cc board

In reply to djw at t-chip.com.cn

Hi Levin,

Am Samstag, 20. Januar 2018, 17:54:04 CET schrieb djw at t-chip.com.cn:

Quoted 16 lines

From: Levin Du <[email protected]>

Hi all,
This version uses SPDX license tag.

The roc-rk3328-cc is a credit card size single board computer using the Rockchip RK3328 Quad-Core ARM Cortex A53 64-Bit Processor and supporting up to 2GB 2133MHz LPDDR4 memory. It provides eMMC module socket, MicroSD Card slot, USB 2.0/3.0, Gigabit Ethernet, HDMI/CVBS, Infrared Receiver, SPDIF/I2S, and SPI/I2C/UART/PWM interfaces.

The devicetree currently supports basic peripherals.

+&i2c1 {

arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts line 105

Quoted 3 lines
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +3 -0
+	status = "okay";
+
+	rk805: rk805 at 18 {

As noted by Rob in his review, this should be

	rk805: pmic at 18 {

While I'd normally just change that myself when applying it looks like you also got comments from Andy to address, so you could change this too.

Thanks
Heiko

#8 lore raw

PATCH v3 1/1 arm64: dts: rockchip: add roc-rk3328-cc board

In reply to djw at t-chip.com.cn

From: Levin Du <[email protected]>

Hi all,

v3:
Use pmic at 18 instead of rk805 at 18
Use macro definition RK_Pxx in gpio number

v2:
Use SPDX license tag

Thanks.

The roc-rk3328-cc is a credit card size single board computer using the Rockchip RK3328 Quad-Core ARM Cortex A53 64-Bit Processor and supporting up to 2GB 2133MHz LPDDR4 memory. It provides eMMC module socket, MicroSD Card slot, USB 2.0/3.0, Gigabit Ethernet, HDMI/CVBS, Infrared Receiver, SPDIF/I2S, and SPI/I2C/UART/PWM interfaces.

The devicetree currently supports basic peripherals.

---
 Documentation/devicetree/bindings/arm/rockchip.txt |   4 +
 arch/arm64/boot/dts/rockchip/Makefile              |   1 +
 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts     | 276 +++++++++++++++++++++
 3 files changed, 281 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
Documentation/devicetree/bindings/arm/rockchip.txt +4 -0
index 326d24b..0f76a62 100644
@@ -50,6 +50,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
 
+- Firefly roc-rk3328-cc board:
+    Required root node properties:
+      - compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
+
 - ChipSPARK PopMetal-RK3288 board:
     Required root node properties:
       - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
arch/arm64/boot/dts/rockchip/Makefile +1 -0
index ce2701e..cf14b86 100644
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file +276 -0

276 lines not on this page · raw message

Signature · 1 line
2.9.2
maintainer
#9 lore raw

PATCH v3 1/1 arm64: dts: rockchip: add roc-rk3328-cc board

Quoted 4 lines · djw at t-chip.com.cn

From: Levin Du <[email protected]>

Hi all,

Quoted 8 lines

v3:
Use pmic at 18 instead of rk805 at 18
Use macro definition RK_Pxx in gpio number

v2:
Use SPDX license tag

Thanks.

All of this above belongs below the '---' so it is not in the commit msg.

Otherwise,

Quoted 15 lines

The roc-rk3328-cc is a credit card size single board computer using the Rockchip RK3328 Quad-Core ARM Cortex A53 64-Bit Processor and supporting up to 2GB 2133MHz LPDDR4 memory. It provides eMMC module socket, MicroSD Card slot, USB 2.0/3.0, Gigabit Ethernet, HDMI/CVBS, Infrared Receiver, SPDIF/I2S, and SPI/I2C/UART/PWM interfaces.

The devicetree currently supports basic peripherals.

---
 Documentation/devicetree/bindings/arm/rockchip.txt |   4 +
 arch/arm64/boot/dts/rockchip/Makefile              |   1 +
 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts     | 276 +++++++++++++++++++++
 3 files changed, 281 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
maintainer
#10 lore raw

PATCH v3 1/1 arm64: dts: rockchip: add roc-rk3328-cc board

In reply to djw at t-chip.com.cn

Hi Levin,

Am Dienstag, 23. Januar 2018, 03:10:17 CET schrieb djw at t-chip.com.cn:

Quoted 19 lines

From: Levin Du <[email protected]>

Hi all,

v3:
Use pmic at 18 instead of rk805 at 18
Use macro definition RK_Pxx in gpio number

v2:
Use SPDX license tag

Thanks.

The roc-rk3328-cc is a credit card size single board computer using the Rockchip RK3328 Quad-Core ARM Cortex A53 64-Bit Processor and supporting up to 2GB 2133MHz LPDDR4 memory. It provides eMMC module socket, MicroSD Card slot, USB 2.0/3.0, Gigabit Ethernet, HDMI/CVBS, Infrared Receiver, SPDIF/I2S, and SPI/I2C/UART/PWM interfaces.

Quoted 3 lines

The devicetree currently supports basic peripherals.

I've applied the patch for 4.17 with some changes:
- dropped the version prose in the commit message as noted by Rob
- dropped the usbdrd3 elements for the time being.
Definitly not your fault and I did pick up the core usb3 enablement for the rk3328, but it looks like this needs a bit more time as the phy has this issue of not recognizing device unpluggs, making the controller not taking any plug events after that at all.
So I want to make that actually work, before I bind myself to the binding using the dwc3-of-simple stuff.
We can readd the dwc3 nodes to the roc-3328-cc once that works correctly.

Heiko