LaCie USB HD not working...
Hi,
I'm getting another stab at this. I've had this drive for about a year, never got it to work on my PPC boxes.
Here's the lowdown:
LaCie USB 20G hard-drive, 0x59f/0xa601 ID (it's in the unusual_devs.h) Some people got it to work it seems:
http://www.qbik.ch/usb/devices/showdev.php?id=68
Here's the log when I plug the device in:
Jun 18 21:04:26 dozo kernel: hub.c: USB new device connect on bus1/1, assigned device number 2 Jun 18 21:04:26 dozo kernel: usb.c: USB device 2 (vend/prod 0x59f/0xa601) is not claimed by any active driver. Jun 18 21:04:27 dozo kernel: Initializing USB Mass Storage driver... Jun 18 21:04:27 dozo kernel: usb.c: registered new driver usb-storage Jun 18 21:04:30 dozo kernel: usb_control/bulk_msg: timeout Jun 18 21:04:33 dozo kernel: usb_control/bulk_msg: timeout Jun 18 21:04:33 dozo kernel: scsi0 : SCSI emulation for USB Mass Storage
devicesJun 18 21:04:44 dozo kernel: usb_control/bulk_msg: timeout
Did anybody got this drive to work on an OHCI controller or even better, on a PPC ?
Cheers
--
/Bastien Nocera
http://hadess.net
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Re: LaCie USB HD not working... (more info)
Bad, replying to myself,
Here's more debug though:
Initializing USB Mass Storage driver...usb.c: registered new driver usb-storage
USB Mass Storage support registered.hub.c: USB new device connect on bus1/1, assigned device number 3
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 32
usb-storage: Array length appears to be: 86
usb-storage: Vendor: LaCie
usb-storage: Product: USB Hard Disk
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xc8cc34a0 Out: 0xc8cc34b4 Int: 0xc8cc34c8 (Period 100)
usb_control/bulk_msg: timeoutusb.c: error getting string descriptor 0 (error=-110) usb_control/bulk_msg: timeoutusb.c: error getting string descriptor 0 (error=-110)
usb-storage: New GUID 059fa6010000000000000000
usb-storage: Transport: Control/Bulk
usb-storage: Protocol: Reduced Block Commands (RBC)
usb-storage: *** thread sleeping.
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 ff 00 00 00 00 00 00 01
usb-storage: command_abort() called
usb-storage: Call to usb_stor_control_msg() returned -104
usb-storage: -- transport indicates error, resetting
usb-storage: CB_reset() called
usb_control/bulk_msg: timeout
usb-storage: CB[I] soft reset failed -110
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb-storage: usb_stor_exit() called
usb-storage: -- calling usb_deregister()usb.c: deregistering driver usb-storage
That's what happens when I plug in/unplug my HD.
Quoted 19 lines · Bastien Nocera
I'm getting another stab at this. I've had this drive for about a year, never got it to work on my PPC boxes.
Here's the lowdown:
LaCie USB 20G hard-drive, 0x59f/0xa601 ID (it's in theunusual_devs.h) Some people got it to work it seems:
http://www.qbik.ch/usb/devices/showdev.php?id=68Here's the log when I plug the device in:
Jun 18 21:04:26 dozo kernel: hub.c: USB new device connect on bus1/1, assigned device number 2 Jun 18 21:04:26 dozo kernel: usb.c: USB device 2 (vend/prod 0x59f/0xa601) is not claimed by any active driver. Jun 18 21:04:27 dozo kernel: Initializing USB Mass Storage driver... Jun 18 21:04:27 dozo kernel: usb.c: registered new driver usb-storage Jun 18 21:04:30 dozo kernel: usb_control/bulk_msg: timeout Jun 18 21:04:33 dozo kernel: usb_control/bulk_msg: timeout Jun 18 21:04:33 dozo kernel: scsi0 : SCSI emulation for USB Mass Storage
Quoted 4 lines
devicesJun 18 21:04:44 dozo kernel: usb_control/bulk_msg: timeout
Did anybody got this drive to work on an OHCI controller or even better, on a PPC ?
--
/Bastien Nocera
http://hadess.net
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/