Unable to use Actiontec 56K Internal PCI Call Waiting modem with linux 2.4.19-rc2 kernel
[1.] One line summary of the problem:
Unable to use "Actiontec 56K Internal PCI Call Waiting modem" with linux 2.4.19-rc2 kernel
[2.] Full description of the problem/report:
When I issue the following command to setup my serial port I get the error:
root@delta:~# setserial /dev/ttyS2 uart 16550A port 0x9000 irq 5 Cannot set serial info: Address already in use
However I think that this error is spurious as I have ensured that the card is not sharing an IRQ with any other devices.
Additionally I have built older kernels with the same config file and my modem works with the 2.4.6 kernel and does not work with the 2.4.7 kernel.
When setserial fails, if I try to use minicom I get no response from the modem when I type in AT commands. If I use a working kernel the AT commands act normally.
As a test I copied the following files from the 2.4.6 source tree into my 2.4.19-rc2 tree:
/usr/src/linux/drivers/char/serial.c/usr/src/linux/include/linux/serial.h/usr/src/linux/include/linux/serialP.h
With this "patch" applied I can use my modem with no issues.
[3.] Keywords (i.e., modules, networking, kernel):serial.c, actiontec, Modem
[4.] Kernel version (from /proc/version):
Linux version 2.4.19-rc2 (root@delta) (gcc version 2.95.3 20010315 (release)) #1 Wed Jul 17 21:37:46 PDT 2002
[5.] Output of Oops.. message (if applicable) with symbolic information resolved N/A
[6.] A small shell script or example program which triggers the
problem (if possible)
See description
[7.] Environment
The follow is a non working environment from the vanilla rc2
[7.1.] Software (add the output of the ver_linux script here)
Linux delta 2.4.19-rc2 #1 Wed Jul 17 21:37:46 PDT 2002 i686 unknown
Gnu C 2.95.3 Gnu make 3.79.1 binutils 2.11.90.0.19 util-linux 2.11f mount 2.11b modutils 2.4.6 e2fsprogs 1.27 reiserfsprogs 3.x.0j pcmcia-cs 3.1.26 PPP 2.4.1 Linux C Library 2.2.3 Dynamic linker (ldd) 2.2.3 Procps 2.0.7 Net-tools 1.60 Kbd 1.06 Sh-utils 2.0 Modules Loaded iptable_filter ip_nat_ftp iptable_nat ip_conntrack_ftp ip_conntrack ip_tables apm ppp_deflate ppp_async ppp_generic slhc rtc nls_iso8859-1 nls_cp437 vfat fat
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0vendor_id : AuthenticAMD
cpu family : 6
model : 2
model name : AMD Athlon(tm) Processor
stepping : 1
cpu MHz : 800.047
cache size : 512 KBfdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 1595.80
[7.3.] Module information (from /proc/modules):
iptable_filter 1760 0 (autoclean) (unused) ip_nat_ftp 2944 0 (unused) iptable_nat 12880 1 [ip_nat_ftp] ip_conntrack_ftp 3184 0 (unused) ip_conntrack 13392 2 [ip_nat_ftp iptable_nat ip_conntrack_ftp] ip_tables 10560 4 [iptable_filter iptable_nat] apm 9440 1 ppp_deflate 40160 0 (unused) ppp_async 6544 0 (unused) ppp_generic 15744 0 [ppp_deflate ppp_async] slhc 4624 0 [ppp_generic] rtc 6016 0 (autoclean) nls_iso8859-1 2880 1 (autoclean) nls_cp437 4384 1 (autoclean) vfat 9456 1 (autoclean) fat 29504 0 (autoclean) [vfat]
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
7800-7807 : Creative Labs SB Live! MIDI/Game Port 8000-801f : Creative Labs SB Live! EMU10k1
8400-8407 : Lucent Microelectronics Venus Modem (V90, 56KFlex) 8800-88ff : Lucent Microelectronics Venus Modem (V90, 56KFlex) 9000-90ff : Lucent Microelectronics Venus Modem (V90, 56KFlex)
9000-9007 : serial(auto)
9400-947f : 3Com Corporation 3c905B 100BaseTX [Cyclone]
9400-947f : 00:09.0
b000-b01f : VIA Technologies, Inc. UHCI USB (#2)
b000-b01f : usb-uhci
b400-b41f : VIA Technologies, Inc. UHCI USB
b400-b41f : usb-uhci
b800-b80f : VIA Technologies, Inc. Bus Master IDE
b800-b807 : ide0
b808-b80f : ide1
d000-dfff : PCI Bus #01
d800-d8ff : 3Dfx Interactive, Inc. Voodoo 3
e400-e4ff : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] e800-e80f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0fffbfff : System RAM
00100000-00260f95 : Kernel code
00260f96-002ccaf7 : Kernel data
0fffc000-0fffefff : ACPI Tables
0ffff000-0fffffff : ACPI Non-volatile Storage
dc800000-dc8000ff : Lucent Microelectronics Venus Modem (V90, 56KFlex) dd000000-dd0fffff : Sigma Designs, Inc. REALmagic Hollywood Plus DVD Decoder dd800000-dd80007f : 3Com Corporation 3c905B 100BaseTX [Cyclone] de000000-e1dfffff : PCI Bus #01
de000000-dfffffff : 3Dfx Interactive, Inc. Voodoo 3
e1f00000-e3ffffff : PCI Bus #01
e2000000-e3ffffff : 3Dfx Interactive, Inc. Voodoo 3
e4000000-e7ffffff : VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] ffff0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: VIA Technologies, Inc. VT82C691 [Apollo PRO] (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 8023
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: de000000-e1dfffff
Prefetchable memory behind bridge: e1f00000-e3ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 22)
Subsystem: Asustek Computer, Inc.: Unknown device 8023
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:04.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 10) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at b800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10) (prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 7
Region 4: I/O ports at b400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10) (prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 7
Region 4: I/O ports at b000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at 9400 [size=128]
Region 1: Memory at dd800000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Multimedia controller: Sigma Designs, Inc. REALmagic Hollywood Plus DVD Decoder (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 10
Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Communication controller: Lucent Microelectronics Venus Modem (V90, 56KFlex)
Subsystem: Action Tec Electronics Inc: Unknown device 0500 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (63000ns min, 3500ns max) Interrupt: pin A routed to IRQ 5 Region 0: Memory at dc800000 (32-bit, non-prefetchable) [size=256] Region 1: I/O ports at 9000 [size=256] Region 2: I/O ports at 8800 [size=256] Region 3: I/O ports at 8400 [size=8] Capabilities: [f8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 05)
Subsystem: Creative Labs CT4620 SBLive!
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at 8000 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.1 Input device controller: Creative Labs SB Live! (rev 05)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at 7800 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 01) (prog-if 00 [VGA])
Subsystem: 3Dfx Interactive, Inc. Voodoo3 AGP Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Interrupt: pin A routed to IRQ 11 Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at e2000000 (32-bit, prefetchable) [size=32M] Region 2: I/O ports at d800 [size=256] Expansion ROM at e1ff0000 [disabled] [size=64K] Capabilities: [54] AGP version 1.0 Status: RQ=7 SBA+ 64bit+ FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices: none
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you think to be relevant):
/proc/tty/driver/serial
serinfo:1.0 driver:5.05c revision:2001-07-08
0: uart:16550A port:3F8 irq:4 baud:9600 tx:0 rx:0 1: uart:16550A port:2F8 irq:3 baud:9600 tx:0 rx:0 4: uart:16550A port:9000 irq:5 baud:9600 tx:0 rx:0 CTS|DSR
/proc/tty/drivers
serial /dev/cua 5 64-127 serial:callout serial /dev/ttyS 4 64-127 serial pty_slave /dev/pts 136 0-255 pty:slave pty_master /dev/ptm 128 0-255 pty:master pty_slave /dev/ttyp 3 0-255 pty:slave pty_master /dev/pty 2 0-255 pty:master /dev/vc/0 /dev/vc/0 4 0 system:vtmaster /dev/ptmx /dev/ptmx 5 2 system /dev/console /dev/console 5 1 system:console /dev/tty /dev/tty 5 0 system:/dev/tty unknown /dev/vc/%d 4 1-63 console
[X.] Other notes, patches, fixes, workarounds:
See description
-------------------------------------------------------------
-------------------------------------------------------------
---------- PATCHED KERNEL -----------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
The following is the output from the patched 2.4.19-rc2 kernel per my patch in the description
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
Linux delta 2.4.19-patch #6 Wed Jul 17 22:49:11 PDT 2002 i686 unknown
Gnu C 2.95.3 Gnu make 3.79.1 binutils 2.11.90.0.19 util-linux 2.11f mount 2.11b modutils 2.4.6 e2fsprogs 1.27 reiserfsprogs 3.x.0j pcmcia-cs 3.1.26 PPP 2.4.1 Linux C Library 2.2.3 Dynamic linker (ldd) 2.2.3 Procps 2.0.7 Net-tools 1.60 Kbd 1.06 Sh-utils 2.0 Modules Loaded iptable_filter ip_nat_ftp iptable_nat
ip_conntrack_ftp ip_conntrack ip_tables apm ppp_deflate ppp_async ppp_generic slhc rtc nls_iso8859-1 nls_cp437 vfat fat
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0vendor_id : AuthenticAMD
cpu family : 6
model : 2
model name : AMD Athlon(tm) Processor
stepping : 1
cpu MHz : 800.057
cache size : 512 KBfdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 1595.80
[7.3.] Module information (from /proc/modules):
iptable_filter 1760 0 (autoclean) (unused) ip_nat_ftp 2944 0 (unused) iptable_nat 12880 1 [ip_nat_ftp] ip_conntrack_ftp 3184 0 (unused) ip_conntrack 13392 2 [ip_nat_ftp iptable_nat ip_conntrack_ftp] ip_tables 10560 4 [iptable_filter iptable_nat] apm 9440 1 ppp_deflate 40160 0 (unused) ppp_async 6576 0 (unused) ppp_generic 15744 0 [ppp_deflate ppp_async] slhc 4624 0 [ppp_generic] rtc 6032 0 (autoclean) nls_iso8859-1 2880 1 (autoclean) nls_cp437 4400 1 (autoclean) vfat 9456 1 (autoclean) fat 29504 0 (autoclean) [vfat]
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
7800-7807 : Creative Labs SB Live! MIDI/Game Port 8000-801f : Creative Labs SB Live! EMU10k1
8400-8407 : Lucent Microelectronics Venus Modem (V90, 56KFlex) 8800-88ff : Lucent Microelectronics Venus Modem (V90, 56KFlex) 9000-90ff : Lucent Microelectronics Venus Modem (V90, 56KFlex)
9000-9007 : serial(set)
9400-947f : 3Com Corporation 3c905B 100BaseTX [Cyclone]
9400-947f : 00:09.0
b000-b01f : VIA Technologies, Inc. UHCI USB (#2)
b000-b01f : usb-uhci
b400-b41f : VIA Technologies, Inc. UHCI USB
b400-b41f : usb-uhci
b800-b80f : VIA Technologies, Inc. Bus Master IDE
b800-b807 : ide0
b808-b80f : ide1
d000-dfff : PCI Bus #01
d800-d8ff : 3Dfx Interactive, Inc. Voodoo 3
e400-e4ff : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] e800-e80f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0fffbfff : System RAM
00100000-00260e25 : Kernel code
00260e26-002cc797 : Kernel data
0fffc000-0fffefff : ACPI Tables
0ffff000-0fffffff : ACPI Non-volatile Storage
dc800000-dc8000ff : Lucent Microelectronics Venus Modem (V90, 56KFlex) dd000000-dd0fffff : Sigma Designs, Inc. REALmagic Hollywood Plus DVD Decoder dd800000-dd80007f : 3Com Corporation 3c905B 100BaseTX [Cyclone] de000000-e1dfffff : PCI Bus #01
de000000-dfffffff : 3Dfx Interactive, Inc. Voodoo 3
e1f00000-e3ffffff : PCI Bus #01
e2000000-e3ffffff : 3Dfx Interactive, Inc. Voodoo 3
e4000000-e7ffffff : VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] ffff0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: VIA Technologies, Inc. VT82C691 [Apollo PRO] (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 8023
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: de000000-e1dfffff
Prefetchable memory behind bridge: e1f00000-e3ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 22)
Subsystem: Asustek Computer, Inc.: Unknown device 8023
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:04.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 10) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at b800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10) (prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 7
Region 4: I/O ports at b400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10) (prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 7
Region 4: I/O ports at b000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at 9400 [size=128]
Region 1: Memory at dd800000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Multimedia controller: Sigma Designs, Inc. REALmagic Hollywood Plus DVD Decoder (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 10
Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Communication controller: Lucent Microelectronics Venus Modem (V90, 56KFlex)
Subsystem: Action Tec Electronics Inc: Unknown device 0500 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (63000ns min, 3500ns max) Interrupt: pin A routed to IRQ 5 Region 0: Memory at dc800000 (32-bit, non-prefetchable) [size=256] Region 1: I/O ports at 9000 [size=256] Region 2: I/O ports at 8800 [size=256] Region 3: I/O ports at 8400 [size=8] Capabilities: [f8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 05)
Subsystem: Creative Labs CT4620 SBLive!
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at 8000 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.1 Input device controller: Creative Labs SB Live! (rev 05)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at 7800 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 01) (prog-if 00 [VGA])
Subsystem: 3Dfx Interactive, Inc. Voodoo3 AGP Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Interrupt: pin A routed to IRQ 11 Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at e2000000 (32-bit, prefetchable) [size=32M] Region 2: I/O ports at d800 [size=256] Expansion ROM at e1ff0000 [disabled] [size=64K] Capabilities: [54] AGP version 1.0 Status: RQ=7 SBA+ 64bit+ FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices: none
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you think to be relevant):
/proc/tty/driver/serial
serinfo:1.0 driver:5.05a revision:2001-03-20
0: uart:16550A port:3F8 irq:4 baud:9600 tx:0 rx:0 1: uart:16550A port:2F8 irq:3 baud:9600 tx:0 rx:0 2: uart:16550A port:9000 irq:5 baud:9600 tx:0 rx:0 CTS|DSR 3: uart:unknown port:2E8 irq:3
4: uart:unknown port:FFFFFFFF irq:0
5: uart:unknown port:1A0 irq:9
6: uart:unknown port:1A8 irq:9
7: uart:unknown port:1B0 irq:9
8: uart:unknown port:1B8 irq:9
9: uart:unknown port:2A0 irq:5
10: uart:unknown port:2A8 irq:5
11: uart:unknown port:2B0 irq:5
12: uart:unknown port:2B8 irq:5
13: uart:unknown port:330 irq:4
14: uart:unknown port:338 irq:4
15: uart:unknown port:0 irq:0
16: uart:unknown port:0 irq:0
17: uart:unknown port:100 irq:12
18: uart:unknown port:108 irq:12
19: uart:unknown port:110 irq:12
20: uart:unknown port:118 irq:12
21: uart:unknown port:120 irq:12
22: uart:unknown port:128 irq:12
23: uart:unknown port:130 irq:12
24: uart:unknown port:138 irq:12
25: uart:unknown port:140 irq:12
26: uart:unknown port:148 irq:12
27: uart:unknown port:150 irq:12
28: uart:unknown port:158 irq:12
29: uart:unknown port:160 irq:12
30: uart:unknown port:168 irq:12
31: uart:unknown port:170 irq:12
32: uart:unknown port:178 irq:12
33: uart:unknown port:0 irq:0
34: uart:unknown port:0 irq:0
35: uart:unknown port:0 irq:0
36: uart:unknown port:0 irq:0
37: uart:unknown port:0 irq:0
38: uart:unknown port:0 irq:0
39: uart:unknown port:0 irq:0
40: uart:unknown port:0 irq:0
41: uart:unknown port:0 irq:0
42: uart:unknown port:0 irq:0
43: uart:unknown port:0 irq:0
44: uart:unknown port:0 irq:0
45: uart:unknown port:0 irq:0
46: uart:unknown port:0 irq:0
47: uart:unknown port:0 irq:0
48: uart:unknown port:0 irq:0
49: uart:unknown port:0 irq:0
50: uart:unknown port:0 irq:0
51: uart:unknown port:0 irq:0
52: uart:unknown port:0 irq:0
53: uart:unknown port:0 irq:0
54: uart:unknown port:0 irq:0
55: uart:unknown port:0 irq:0
56: uart:unknown port:0 irq:0
57: uart:unknown port:0 irq:0
58: uart:unknown port:0 irq:0
59: uart:unknown port:0 irq:0
60: uart:unknown port:0 irq:0
61: uart:unknown port:0 irq:0
62: uart:unknown port:0 irq:0
63: uart:unknown port:0 irq:0
/proc/tty/drivers
serial /dev/cua 5 64-127 serial:callout serial /dev/ttyS 4 64-127 serial pty_slave /dev/pts 136 0-255 pty:slave pty_master /dev/ptm 128 0-255 pty:master pty_slave /dev/ttyp 3 0-255 pty:slave pty_master /dev/pty 2 0-255 pty:master /dev/vc/0 /dev/vc/0 4 0 system:vtmaster /dev/ptmx /dev/ptmx 5 2 system /dev/console /dev/console 5 1 system:console /dev/tty /dev/tty 5 0 system:/dev/tty unknown /dev/vc/%d 4 1-63 console
#
# Automatically generated by make menuconfig: don't edit #CONFIG_X86=yCONFIG_ISA=y
# CONFIG_SBUS is not setCONFIG_UID16=y
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
#
# Loadable module support
#CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not setCONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not setCONFIG_MK7=y
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not setCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_CMPXCHG=yCONFIG_X86_XADD=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not setCONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_TSC=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_USE_3DNOW=yCONFIG_X86_PGE=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_MCE=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not setCONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not setCONFIG_MTRR=y
# CONFIG_SMP is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_UP_IOAPIC is not set
#
# General setup
#CONFIG_NET=yCONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not setCONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#CONFIG_PCMCIA=yCONFIG_CARDBUS=y
# CONFIG_TCIC is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not setCONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not setCONFIG_SYSCTL=yCONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not setCONFIG_BINFMT_AOUT=yCONFIG_BINFMT_ELF=yCONFIG_BINFMT_MISC=yCONFIG_PM=yCONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not setCONFIG_APM_DISPLAY_BLANK=y
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play configuration
#CONFIG_PNP=yCONFIG_ISAPNP=y
#
# Block devices
#CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not setCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_NBD=mCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_SIZE=4096CONFIG_BLK_DEV_INITRD=y
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
#
# Networking options
#CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not setCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_FILTER is not setCONFIG_UNIX=yCONFIG_INET=yCONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
#
# IP: Netfilter Configuration
#CONFIG_IP_NF_CONNTRACK=mCONFIG_IP_NF_FTP=m
# CONFIG_IP_NF_IRC is not setCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_LIMIT=m
# CONFIG_IP_NF_MATCH_MAC is not set
# CONFIG_IP_NF_MATCH_MARK is not setCONFIG_IP_NF_MATCH_MULTIPORT=mCONFIG_IP_NF_MATCH_TOS=m
# CONFIG_IP_NF_MATCH_AH_ESP is not set
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not setCONFIG_IP_NF_MATCH_STATE=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_NAT=mCONFIG_IP_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_NAT_LOCAL is not setCONFIG_IP_NF_NAT_FTP=m
# CONFIG_IP_NF_MANGLE is not setCONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
#
# Appletalk devices
#
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set
# CONFIG_PHONE_IXJ_PCMCIA is not set
#
# ATA/IDE/MFM/RLL support
#CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not setCONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
# CONFIG_BLK_DEV_IDEDISK_IBM is not set
# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
# CONFIG_BLK_DEV_IDEDISK_WD is not set
# CONFIG_BLK_DEV_COMMERIAL is not set
# CONFIG_BLK_DEV_TIVO is not set
# CONFIG_BLK_DEV_IDECS is not setCONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not setCONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not setCONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not setCONFIG_BLK_DEV_RZ1000=yCONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_SHARE_IRQ=yCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not setCONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not setCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not setCONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC62XX_TUNING is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_AMD74XX_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CMD680 is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not setCONFIG_BLK_DEV_PIIX=yCONFIG_PIIX_TUNING=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not setCONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_CHIPSETS is not setCONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not setCONFIG_BLK_DEV_IDE_MODES=y
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
#
# SCSI support
#CONFIG_SCSI=y
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not setCONFIG_BLK_DEV_SR=yCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_SR_EXTRA_DEVS=2CONFIG_CHR_DEV_SG=yCONFIG_SCSI_DEBUG_QUEUES=yCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not setCONFIG_SCSI_SYM53C8XX=mCONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_SCSI_PCMCIA is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Network device support
#CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not setCONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not setCONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
# CONFIG_ELMC is not set
# CONFIG_ELMC_II is not setCONFIG_VORTEX=y
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not setCONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_TULIP is not set
# CONFIG_TC35815 is not set
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not setCONFIG_EEPRO100=y
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_NEW_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_PLIP is not setCONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not setCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOATM is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not setCONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_DIGI is not set
# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not setCONFIG_N_HDLC=m
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not setCONFIG_UNIX98_PTYS=yCONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not setCONFIG_MOUSE=yCONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set
# CONFIG_MK712_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_AMD_RNG is not setCONFIG_INTEL_RNG=m
# CONFIG_NVRAM is not setCONFIG_RTC=m
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not setCONFIG_AGP=yCONFIG_AGP_INTEL=yCONFIG_AGP_I810=yCONFIG_AGP_VIA=yCONFIG_AGP_AMD=yCONFIG_AGP_SIS=yCONFIG_AGP_ALI=y
# CONFIG_AGP_SWORKS is not setCONFIG_DRM=y
# CONFIG_DRM_OLD is not setCONFIG_DRM_NEW=yCONFIG_DRM_TDFX=y
# CONFIG_DRM_R128 is not setCONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
#
# PCMCIA character devices
#
# CONFIG_PCMCIA_SERIAL_CS is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not setCONFIG_AUTOFS4_FS=y
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not setCONFIG_EXT3_FS=yCONFIG_JBD=yCONFIG_JBD_DEBUG=yCONFIG_FAT_FS=mCONFIG_MSDOS_FS=m
# CONFIG_UMSDOS_FS is not setCONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not setCONFIG_TMPFS=yCONFIG_RAMFS=yCONFIG_ISO9660_FS=yCONFIG_JOLIET=y
# CONFIG_ZISOFS is not setCONFIG_MINIX_FS=m
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not setCONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not setCONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not setCONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not setCONFIG_NFS_FS=yCONFIG_NFS_V3=y
# CONFIG_ROOT_NFS is not setCONFIG_NFSD=yCONFIG_NFSD_V3=yCONFIG_SUNRPC=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set
# CONFIG_ZLIB_FS_INFLATE is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not setCONFIG_MSDOS_PARTITION=yCONFIG_SMB_NLS=yCONFIG_NLS=y
#
# Native Language Support
#CONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not setCONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not setCONFIG_NLS_CODEPAGE_932=m
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_UTF8=m
#
# Console drivers
#CONFIG_VGA_CONSOLE=y
# CONFIG_VIDEO_SELECT is not set
#
# Sound
#CONFIG_SOUND=y
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not setCONFIG_SOUND_EMU10K1=m
# CONFIG_MIDI_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_MIDI_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_TVMIXER is not set
#
# USB support
#CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_LONG_TIMEOUT is not set
# CONFIG_USB_EHCI_HCD is not setCONFIG_USB_UHCI_ALT=y
# CONFIG_USB_OHCI is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not setCONFIG_USB_PRINTER=m
# CONFIG_USB_HID is not set
# CONFIG_USB_HIDINPUT is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not setCONFIG_USB_SCANNER=m
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_BRLVGER is not set
#
# Bluetooth support
#
# CONFIG_BLUEZ is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
I'm using the same modem under Linux 2.4.19-rc1 without problems. Additionally, I have had no problems with it under any version of the kernel. Did 2.4.19-rc1 work for you?
I'm curious about your configuration; on my system, I don't have to run setserial at all, as the serial driver detects the modem automatically on boot. Perhaps this is the problem--your attempt at manual configuration is breaking what the kernel has already done?
Does your kernel detect any serial ports on boot? try "dmesg | grep ttyS" or "grep ttyS /var/log/dmesg" Tell me how that goes.
Quoted 1,628 lines · On Thu, Jul 18, 2002 at 09:26:27AM -0700, [email protected] wrote:
[1.] One line summary of the problem:
Unable to use "Actiontec 56K Internal PCI Call Waiting modem" with linux 2.4.19-rc2 kernel[2.] Full description of the problem/report:
When I issue the following command to setup my serial port I get the error:
root@delta:~# setserial /dev/ttyS2 uart 16550A port 0x9000 irq 5 Cannot set serial info: Address already in useHowever I think that this error is spurious as I have ensured that the card is not sharing an IRQ with any other devices.
Additionally I have built older kernels with the same config file and my modem works with the 2.4.6 kernel and does not work with the 2.4.7 kernel.
When setserial fails, if I try to use minicom I get no response from the modem when I type in AT commands. If I use a working kernel the AT commands act normally.
As a test I copied the following files from the 2.4.6 source tree into my 2.4.19-rc2 tree:
/usr/src/linux/drivers/char/serial.c/usr/src/linux/include/linux/serial.h/usr/src/linux/include/linux/serialP.hWith this "patch" applied I can use my modem with no issues.
[3.] Keywords (i.e., modules, networking, kernel):
serial.c, actiontec, Modem[4.] Kernel version (from
/proc/version):
Linux version 2.4.19-rc2 (root@delta) (gcc version 2.95.3 20010315 (release)) #1 Wed Jul 17 21:37:46 PDT 2002[5.] Output of Oops.. message (if applicable) with symbolic information resolved N/A
[6.] A small shell script or example program which triggers the
problem (if possible)
See description[7.] Environment
The follow is a non working environment from the vanilla rc2[7.1.] Software (add the output of the
ver_linuxscript here)Linux delta 2.4.19-rc2 #1 Wed Jul 17 21:37:46 PDT 2002 i686 unknown
Gnu C 2.95.3 Gnu make 3.79.1 binutils 2.11.90.0.19 util-linux 2.11f mount 2.11b modutils 2.4.6 e2fsprogs 1.27 reiserfsprogs 3.x.0j pcmcia-cs 3.1.26 PPP 2.4.1 Linux C Library 2.2.3 Dynamic linker (ldd) 2.2.3 Procps 2.0.7 Net-tools 1.60 Kbd 1.06 Sh-utils 2.0 Modules Loaded iptable_filter ip_nat_ftp iptable_nat ip_conntrack_ftp ip_conntrack ip_tables apm ppp_deflate ppp_async ppp_generic slhc rtc nls_iso8859-1 nls_cp437 vfat fat[7.2.] Processor information (from
/proc/cpuinfo):processor : 0
vendor_id: AuthenticAMD
cpu family : 6
model : 2
model name : AMD Athlon(tm) Processor
stepping : 1
cpu MHz : 800.047
cache size : 512 KBfdiv_bug: nohlt_bug: nof00f_bug: nocoma_bug: no
fpu : yesfpu_exception: yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 1595.80[7.3.] Module information (from
/proc/modules):iptable_filter 1760 0 (autoclean) (unused) ip_nat_ftp 2944 0 (unused) iptable_nat 12880 1 [ip_nat_ftp] ip_conntrack_ftp 3184 0 (unused) ip_conntrack 13392 2 [ip_nat_ftp iptable_nat ip_conntrack_ftp] ip_tables 10560 4 [iptable_filter iptable_nat] apm 9440 1 ppp_deflate 40160 0 (unused) ppp_async 6544 0 (unused) ppp_generic 15744 0 [ppp_deflate ppp_async] slhc 4624 0 [ppp_generic] rtc 6016 0 (autoclean) nls_iso8859-1 2880 1 (autoclean) nls_cp437 4384 1 (autoclean) vfat 9456 1 (autoclean) fat 29504 0 (autoclean) [vfat][7.4.] Loaded driver and hardware information (
/proc/ioports,/proc/iomem)0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
7800-7807 : Creative Labs SB Live! MIDI/Game Port 8000-801f : Creative Labs SB Live! EMU10k1
8400-8407 : Lucent Microelectronics Venus Modem (V90, 56KFlex) 8800-88ff : Lucent Microelectronics Venus Modem (V90, 56KFlex) 9000-90ff : Lucent Microelectronics Venus Modem (V90, 56KFlex)
9000-9007 : serial(auto)
9400-947f : 3Com Corporation 3c905B 100BaseTX [Cyclone]
9400-947f : 00:09.0
b000-b01f : VIA Technologies, Inc. UHCI USB (#2)
b000-b01f : usb-uhci
b400-b41f : VIA Technologies, Inc. UHCI USB
b400-b41f : usb-uhci
b800-b80f : VIA Technologies, Inc. Bus Master IDE
b800-b807 : ide0
b808-b80f : ide1
d000-dfff : PCI Bus #01
d800-d8ff : 3Dfx Interactive, Inc. Voodoo 3
e400-e4ff : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] e800-e80f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0fffbfff : System RAM
00100000-00260f95 : Kernel code
00260f96-002ccaf7 : Kernel data
0fffc000-0fffefff : ACPI Tables
0ffff000-0fffffff : ACPI Non-volatile Storage
dc800000-dc8000ff : Lucent Microelectronics Venus Modem (V90, 56KFlex) dd000000-dd0fffff : Sigma Designs, Inc. REALmagic Hollywood Plus DVD Decoder dd800000-dd80007f : 3Com Corporation 3c905B 100BaseTX [Cyclone] de000000-e1dfffff : PCI Bus #01
de000000-dfffffff : 3Dfx Interactive, Inc. Voodoo 3
e1f00000-e3ffffff : PCI Bus #01
e2000000-e3ffffff : 3Dfx Interactive, Inc. Voodoo 3
e4000000-e7ffffff : VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] ffff0000-ffffffff : reserved[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: VIA Technologies, Inc. VT82C691 [Apollo PRO] (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 8023
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory ate4000000(32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: de000000-e1dfffff
Prefetchable memory behind bridge: e1f00000-e3ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 22)
Subsystem: Asustek Computer, Inc.: Unknown device 8023
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 000:04.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 10) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at b800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-00:04.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10) (prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 7
Region 4: I/O ports at b400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-00:04.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10) (prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 7
Region 4: I/O ports at b000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at 9400 [size=128]
Region 1: Memory atdd800000(32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mAPME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-00:0a.0 Multimedia controller: Sigma Designs, Inc. REALmagic Hollywood Plus DVD Decoder (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 10
Region 0: Memory atdd000000(32-bit, non-prefetchable) [size=1M]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-00:0b.0 Communication controller: Lucent Microelectronics Venus Modem (V90, 56KFlex)
Subsystem: Action Tec Electronics Inc: Unknown device 0500 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (63000ns min, 3500ns max) Interrupt: pin A routed to IRQ 5 Region 0: Memory at dc800000 (32-bit, non-prefetchable) [size=256] Region 1: I/O ports at 9000 [size=256] Region 2: I/O ports at 8800 [size=256] Region 3: I/O ports at 8400 [size=8] Capabilities: [f8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 05)
Subsystem: Creative Labs CT4620 SBLive!
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at 8000 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-00:0d.1 Input device controller: Creative Labs SB Live! (rev 05)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at 7800 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 01) (prog-if 00 [VGA])
Subsystem: 3Dfx Interactive, Inc. Voodoo3 AGP Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Interrupt: pin A routed to IRQ 11 Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at e2000000 (32-bit, prefetchable) [size=32M] Region 2: I/O ports at d800 [size=256] Expansion ROM at e1ff0000 [disabled] [size=64K] Capabilities: [54] AGP version 1.0 Status: RQ=7 SBA+ 64bit+ FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-[7.6.] SCSI information (from
/proc/scsi/scsi)Attached devices: none
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you think to be relevant):
/proc/tty/driver/serial
serinfo:1.0 driver:5.05c revision:2001-07-08
0: uart:16550A port:3F8 irq:4 baud:9600 tx:0 rx:0 1: uart:16550A port:2F8 irq:3 baud:9600 tx:0 rx:0 4: uart:16550A port:9000 irq:5 baud:9600 tx:0 rx:0 CTS|DSR
/proc/tty/driversserial /dev/cua 5 64-127 serial:callout serial /dev/ttyS 4 64-127 serial pty_slave /dev/pts 136 0-255 pty:slave pty_master /dev/ptm 128 0-255 pty:master pty_slave /dev/ttyp 3 0-255 pty:slave pty_master /dev/pty 2 0-255 pty:master /dev/vc/0 /dev/vc/0 4 0 system:vtmaster /dev/ptmx /dev/ptmx 5 2 system /dev/console /dev/console 5 1 system:console /dev/tty /dev/tty 5 0 system:/dev/tty unknown /dev/vc/%d 4 1-63 console[X.] Other notes, patches, fixes, workarounds:
See description-------------------------------------------------------------
-------------------------------------------------------------
---------- PATCHED KERNEL -----------------------------------
-------------------------------------------------------------
-------------------------------------------------------------The following is the output from the patched 2.4.19-rc2 kernel per my patch in the description
[7.] Environment
[7.1.] Software (add the output of thever_linuxscript here)Linux delta 2.4.19-patch #6 Wed Jul 17 22:49:11 PDT 2002 i686 unknown
Gnu C 2.95.3 Gnu make 3.79.1 binutils 2.11.90.0.19 util-linux 2.11f mount 2.11b modutils 2.4.6 e2fsprogs 1.27 reiserfsprogs 3.x.0j pcmcia-cs 3.1.26 PPP 2.4.1 Linux C Library 2.2.3 Dynamic linker (ldd) 2.2.3 Procps 2.0.7 Net-tools 1.60 Kbd 1.06 Sh-utils 2.0 Modules Loaded iptable_filter ip_nat_ftp iptable_nat
ip_conntrack_ftpip_conntrackip_tablesapmppp_deflateppp_asyncppp_genericslhc rtc nls_iso8859-1nls_cp437vfat fat[7.2.] Processor information (from
/proc/cpuinfo):processor : 0
vendor_id: AuthenticAMD
cpu family : 6
model : 2
model name : AMD Athlon(tm) Processor
stepping : 1
cpu MHz : 800.057
cache size : 512 KBfdiv_bug: nohlt_bug: nof00f_bug: nocoma_bug: no
fpu : yesfpu_exception: yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 1595.80[7.3.] Module information (from
/proc/modules):iptable_filter 1760 0 (autoclean) (unused) ip_nat_ftp 2944 0 (unused) iptable_nat 12880 1 [ip_nat_ftp] ip_conntrack_ftp 3184 0 (unused) ip_conntrack 13392 2 [ip_nat_ftp iptable_nat ip_conntrack_ftp] ip_tables 10560 4 [iptable_filter iptable_nat] apm 9440 1 ppp_deflate 40160 0 (unused) ppp_async 6576 0 (unused) ppp_generic 15744 0 [ppp_deflate ppp_async] slhc 4624 0 [ppp_generic] rtc 6032 0 (autoclean) nls_iso8859-1 2880 1 (autoclean) nls_cp437 4400 1 (autoclean) vfat 9456 1 (autoclean) fat 29504 0 (autoclean) [vfat][7.4.] Loaded driver and hardware information (
/proc/ioports,/proc/iomem)0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
7800-7807 : Creative Labs SB Live! MIDI/Game Port 8000-801f : Creative Labs SB Live! EMU10k1
8400-8407 : Lucent Microelectronics Venus Modem (V90, 56KFlex) 8800-88ff : Lucent Microelectronics Venus Modem (V90, 56KFlex) 9000-90ff : Lucent Microelectronics Venus Modem (V90, 56KFlex)
9000-9007 : serial(set)
9400-947f : 3Com Corporation 3c905B 100BaseTX [Cyclone]
9400-947f : 00:09.0
b000-b01f : VIA Technologies, Inc. UHCI USB (#2)
b000-b01f : usb-uhci
b400-b41f : VIA Technologies, Inc. UHCI USB
b400-b41f : usb-uhci
b800-b80f : VIA Technologies, Inc. Bus Master IDE
b800-b807 : ide0
b808-b80f : ide1
d000-dfff : PCI Bus #01
d800-d8ff : 3Dfx Interactive, Inc. Voodoo 3
e400-e4ff : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] e800-e80f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0fffbfff : System RAM
00100000-00260e25 : Kernel code
00260e26-002cc797 : Kernel data
0fffc000-0fffefff : ACPI Tables
0ffff000-0fffffff : ACPI Non-volatile Storage
dc800000-dc8000ff : Lucent Microelectronics Venus Modem (V90, 56KFlex) dd000000-dd0fffff : Sigma Designs, Inc. REALmagic Hollywood Plus DVD Decoder dd800000-dd80007f : 3Com Corporation 3c905B 100BaseTX [Cyclone] de000000-e1dfffff : PCI Bus #01
de000000-dfffffff : 3Dfx Interactive, Inc. Voodoo 3
e1f00000-e3ffffff : PCI Bus #01
e2000000-e3ffffff : 3Dfx Interactive, Inc. Voodoo 3
e4000000-e7ffffff : VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] ffff0000-ffffffff : reserved[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: VIA Technologies, Inc. VT82C691 [Apollo PRO] (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 8023
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory ate4000000(32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: de000000-e1dfffff
Prefetchable memory behind bridge: e1f00000-e3ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 22)
Subsystem: Asustek Computer, Inc.: Unknown device 8023
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 000:04.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 10) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at b800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-00:04.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10) (prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 7
Region 4: I/O ports at b400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-00:04.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10) (prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 7
Region 4: I/O ports at b000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at 9400 [size=128]
Region 1: Memory atdd800000(32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mAPME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-00:0a.0 Multimedia controller: Sigma Designs, Inc. REALmagic Hollywood Plus DVD Decoder (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 10
Region 0: Memory atdd000000(32-bit, non-prefetchable) [size=1M]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-00:0b.0 Communication controller: Lucent Microelectronics Venus Modem (V90, 56KFlex)
Subsystem: Action Tec Electronics Inc: Unknown device 0500 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (63000ns min, 3500ns max) Interrupt: pin A routed to IRQ 5 Region 0: Memory at dc800000 (32-bit, non-prefetchable) [size=256] Region 1: I/O ports at 9000 [size=256] Region 2: I/O ports at 8800 [size=256] Region 3: I/O ports at 8400 [size=8] Capabilities: [f8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 05)
Subsystem: Creative Labs CT4620 SBLive!
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at 8000 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-00:0d.1 Input device controller: Creative Labs SB Live! (rev 05)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at 7800 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 01) (prog-if 00 [VGA])
Subsystem: 3Dfx Interactive, Inc. Voodoo3 AGP Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Interrupt: pin A routed to IRQ 11 Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at e2000000 (32-bit, prefetchable) [size=32M] Region 2: I/O ports at d800 [size=256] Expansion ROM at e1ff0000 [disabled] [size=64K] Capabilities: [54] AGP version 1.0 Status: RQ=7 SBA+ 64bit+ FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-[7.6.] SCSI information (from
/proc/scsi/scsi)Attached devices: none
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you think to be relevant):
/proc/tty/driver/serialserinfo:1.0 driver:5.05a revision:2001-03-20
0: uart:16550A port:3F8 irq:4 baud:9600 tx:0 rx:0 1: uart:16550A port:2F8 irq:3 baud:9600 tx:0 rx:0 2: uart:16550A port:9000 irq:5 baud:9600 tx:0 rx:0 CTS|DSR 3: uart:unknown port:2E8 irq:3
4: uart:unknown port:FFFFFFFF irq:0
5: uart:unknown port:1A0 irq:9
6: uart:unknown port:1A8 irq:9
7: uart:unknown port:1B0 irq:9
8: uart:unknown port:1B8 irq:9
9: uart:unknown port:2A0 irq:5
10: uart:unknown port:2A8 irq:5
11: uart:unknown port:2B0 irq:5
12: uart:unknown port:2B8 irq:5
13: uart:unknown port:330 irq:4
14: uart:unknown port:338 irq:4
15: uart:unknown port:0 irq:0
16: uart:unknown port:0 irq:0
17: uart:unknown port:100 irq:12
18: uart:unknown port:108 irq:12
19: uart:unknown port:110 irq:12
20: uart:unknown port:118 irq:12
21: uart:unknown port:120 irq:12
22: uart:unknown port:128 irq:12
23: uart:unknown port:130 irq:12
24: uart:unknown port:138 irq:12
25: uart:unknown port:140 irq:12
26: uart:unknown port:148 irq:12
27: uart:unknown port:150 irq:12
28: uart:unknown port:158 irq:12
29: uart:unknown port:160 irq:12
30: uart:unknown port:168 irq:12
31: uart:unknown port:170 irq:12
32: uart:unknown port:178 irq:12
33: uart:unknown port:0 irq:0
34: uart:unknown port:0 irq:0
35: uart:unknown port:0 irq:0
36: uart:unknown port:0 irq:0
37: uart:unknown port:0 irq:0
38: uart:unknown port:0 irq:0
39: uart:unknown port:0 irq:0
40: uart:unknown port:0 irq:0
41: uart:unknown port:0 irq:0
42: uart:unknown port:0 irq:0
43: uart:unknown port:0 irq:0
44: uart:unknown port:0 irq:0
45: uart:unknown port:0 irq:0
46: uart:unknown port:0 irq:0
47: uart:unknown port:0 irq:0
48: uart:unknown port:0 irq:0
49: uart:unknown port:0 irq:0
50: uart:unknown port:0 irq:0
51: uart:unknown port:0 irq:0
52: uart:unknown port:0 irq:0
53: uart:unknown port:0 irq:0
54: uart:unknown port:0 irq:0
55: uart:unknown port:0 irq:0
56: uart:unknown port:0 irq:0
57: uart:unknown port:0 irq:0
58: uart:unknown port:0 irq:0
59: uart:unknown port:0 irq:0
60: uart:unknown port:0 irq:0
61: uart:unknown port:0 irq:0
62: uart:unknown port:0 irq:0
63: uart:unknown port:0 irq:0
/proc/tty/driversserial /dev/cua 5 64-127 serial:callout serial /dev/ttyS 4 64-127 serial pty_slave /dev/pts 136 0-255 pty:slave pty_master /dev/ptm 128 0-255 pty:master pty_slave /dev/ttyp 3 0-255 pty:slave pty_master /dev/pty 2 0-255 pty:master /dev/vc/0 /dev/vc/0 4 0 system:vtmaster /dev/ptmx /dev/ptmx 5 2 system /dev/console /dev/console 5 1 system:console /dev/tty /dev/tty 5 0 system:/dev/tty unknown /dev/vc/%d 4 1-63 console#
# Automatically generated by make menuconfig: don't edit #CONFIG_X86=yCONFIG_ISA=y
#CONFIG_SBUSis not setCONFIG_UID16=y#
# Code maturity level options
#
#CONFIG_EXPERIMENTALis not set#
# Loadable module support
#CONFIG_MODULES=y
#CONFIG_MODVERSIONSis not setCONFIG_KMOD=y#
# Processor type and features
#
#CONFIG_M386is not set
#CONFIG_M486is not set
#CONFIG_M586is not set
#CONFIG_M586TSCis not set
#CONFIG_M586MMXis not set
#CONFIG_M686is not set
#CONFIG_MPENTIUMIIIis not set
#CONFIG_MPENTIUM4is not set
#CONFIG_MK6is not setCONFIG_MK7=y
#CONFIG_MELANis not set
#CONFIG_MCRUSOEis not set
#CONFIG_MWINCHIPC6is not set
#CONFIG_MWINCHIP2is not set
#CONFIG_MWINCHIP3Dis not set
#CONFIG_MCYRIXIIIis not setCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_CMPXCHG=yCONFIG_X86_XADD=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=y
#CONFIG_RWSEM_GENERIC_SPINLOCKis not setCONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_TSC=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_USE_3DNOW=yCONFIG_X86_PGE=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_MCE=y
#CONFIG_TOSHIBAis not set
#CONFIG_I8Kis not set
#CONFIG_MICROCODEis not set
#CONFIG_X86_MSRis not set
#CONFIG_X86_CPUIDis not setCONFIG_NOHIGHMEM=y
#CONFIG_HIGHMEM4Gis not set
#CONFIG_HIGHMEM64Gis not set
#CONFIG_MATH_EMULATIONis not setCONFIG_MTRR=y
#CONFIG_SMPis not set
#CONFIG_X86_UP_APICis not set
#CONFIG_X86_UP_IOAPICis not set#
# General setup
#CONFIG_NET=yCONFIG_PCI=y
#CONFIG_PCI_GOBIOSis not set
#CONFIG_PCI_GODIRECTis not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_NAMES=y
#CONFIG_EISAis not set
#CONFIG_MCAis not setCONFIG_HOTPLUG=y#
# PCMCIA/CardBus support
#CONFIG_PCMCIA=yCONFIG_CARDBUS=y
#CONFIG_TCICis not set
#CONFIG_I82092is not set
#CONFIG_I82365is not set#
# PCI Hotplug Support
#
#CONFIG_HOTPLUG_PCIis not set
#CONFIG_HOTPLUG_PCI_COMPAQis not set
#CONFIG_HOTPLUG_PCI_COMPAQ_NVRAMis not set
#CONFIG_HOTPLUG_PCI_ACPIis not setCONFIG_SYSVIPC=y
#CONFIG_BSD_PROCESS_ACCTis not setCONFIG_SYSCTL=yCONFIG_KCORE_ELF=y
#CONFIG_KCORE_AOUTis not setCONFIG_BINFMT_AOUT=yCONFIG_BINFMT_ELF=yCONFIG_BINFMT_MISC=yCONFIG_PM=yCONFIG_APM=m
#CONFIG_APM_IGNORE_USER_SUSPENDis not set
#CONFIG_APM_DO_ENABLEis not set
#CONFIG_APM_CPU_IDLEis not setCONFIG_APM_DISPLAY_BLANK=y
#CONFIG_APM_RTC_IS_GMTis not set
#CONFIG_APM_ALLOW_INTSis not set
#CONFIG_APM_REAL_MODE_POWER_OFFis not set#
# Memory Technology Devices (MTD)
#
#CONFIG_MTDis not set#
# Parallel port support
#
#CONFIG_PARPORTis not set#
# Plug and Play configuration
#CONFIG_PNP=yCONFIG_ISAPNP=y#
# Block devices
#CONFIG_BLK_DEV_FD=y
#CONFIG_BLK_DEV_XDis not set
#CONFIG_PARIDEis not set
#CONFIG_BLK_CPQ_DAis not set
#CONFIG_BLK_CPQ_CISS_DAis not set
#CONFIG_CISS_SCSI_TAPEis not set
#CONFIG_BLK_DEV_DAC960is not set
#CONFIG_BLK_DEV_UMEMis not setCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_NBD=mCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_SIZE=4096CONFIG_BLK_DEV_INITRD=y#
# Multi-device support (RAID and LVM)
#
#CONFIG_MDis not set
#CONFIG_BLK_DEV_MDis not set
#CONFIG_MD_LINEARis not set
#CONFIG_MD_RAID0is not set
#CONFIG_MD_RAID1is not set
#CONFIG_MD_RAID5is not set
#CONFIG_MD_MULTIPATHis not set
#CONFIG_BLK_DEV_LVMis not set#
# Networking options
#CONFIG_PACKET=y
#CONFIG_PACKET_MMAPis not set
#CONFIG_NETLINK_DEVis not setCONFIG_NETFILTER=y
#CONFIG_NETFILTER_DEBUGis not set
#CONFIG_FILTERis not setCONFIG_UNIX=yCONFIG_INET=yCONFIG_IP_MULTICAST=y
#CONFIG_IP_ADVANCED_ROUTERis not set
#CONFIG_IP_PNPis not set
#CONFIG_NET_IPIPis not set
#CONFIG_NET_IPGREis not set
#CONFIG_IP_MROUTEis not set
#CONFIG_INET_ECNis not set
#CONFIG_SYN_COOKIESis not set#
# IP: Netfilter Configuration
#CONFIG_IP_NF_CONNTRACK=mCONFIG_IP_NF_FTP=m
#CONFIG_IP_NF_IRCis not setCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_LIMIT=m
#CONFIG_IP_NF_MATCH_MACis not set
#CONFIG_IP_NF_MATCH_MARKis not setCONFIG_IP_NF_MATCH_MULTIPORT=mCONFIG_IP_NF_MATCH_TOS=m
#CONFIG_IP_NF_MATCH_AH_ESPis not set
#CONFIG_IP_NF_MATCH_LENGTHis not set
#CONFIG_IP_NF_MATCH_TTLis not set
#CONFIG_IP_NF_MATCH_TCPMSSis not setCONFIG_IP_NF_MATCH_STATE=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_NAT=mCONFIG_IP_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_REDIRECT=m
#CONFIG_IP_NF_NAT_LOCALis not setCONFIG_IP_NF_NAT_FTP=m
#CONFIG_IP_NF_MANGLEis not setCONFIG_IP_NF_TARGET_LOG=m
#CONFIG_IP_NF_TARGET_ULOGis not set
#CONFIG_IP_NF_TARGET_TCPMSSis not set
#CONFIG_IP_NF_ARPTABLESis not set
#CONFIG_IP_NF_COMPAT_IPCHAINSis not set
#CONFIG_IP_NF_COMPAT_IPFWADMis not set
#CONFIG_VLAN_8021Qis not set
#CONFIG_IPXis not set
#CONFIG_ATALKis not set#
# Appletalk devices
#
#CONFIG_DEV_APPLETALKis not set
#CONFIG_DECNETis not set
#CONFIG_BRIDGEis not set#
# QoS and/or fair queueing
#
#CONFIG_NET_SCHEDis not set#
# Network testing
#
#CONFIG_NET_PKTGENis not set#
# Telephony Support
#
#CONFIG_PHONEis not set
#CONFIG_PHONE_IXJis not set
#CONFIG_PHONE_IXJ_PCMCIAis not set#
# ATA/IDE/MFM/RLL support
#CONFIG_IDE=y#
# IDE, ATA and ATAPI Block devices
#CONFIG_BLK_DEV_IDE=y
#CONFIG_BLK_DEV_HD_IDEis not set
#CONFIG_BLK_DEV_HDis not setCONFIG_BLK_DEV_IDEDISK=y
#CONFIG_IDEDISK_MULTI_MODEis not set
#CONFIG_IDEDISK_STROKEis not set
#CONFIG_BLK_DEV_IDEDISK_VENDORis not set
#CONFIG_BLK_DEV_IDEDISK_FUJITSUis not set
#CONFIG_BLK_DEV_IDEDISK_IBMis not set
#CONFIG_BLK_DEV_IDEDISK_MAXTORis not set
#CONFIG_BLK_DEV_IDEDISK_QUANTUMis not set
#CONFIG_BLK_DEV_IDEDISK_SEAGATEis not set
#CONFIG_BLK_DEV_IDEDISK_WDis not set
#CONFIG_BLK_DEV_COMMERIALis not set
#CONFIG_BLK_DEV_TIVOis not set
#CONFIG_BLK_DEV_IDECSis not setCONFIG_BLK_DEV_IDECD=m
#CONFIG_BLK_DEV_IDETAPEis not set
#CONFIG_BLK_DEV_IDEFLOPPYis not setCONFIG_BLK_DEV_IDESCSI=m
#CONFIG_IDE_TASK_IOCTLis not setCONFIG_BLK_DEV_CMD640=y
#CONFIG_BLK_DEV_CMD640_ENHANCEDis not set
#CONFIG_BLK_DEV_ISAPNPis not setCONFIG_BLK_DEV_RZ1000=yCONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_SHARE_IRQ=yCONFIG_BLK_DEV_IDEDMA_PCI=y
#CONFIG_BLK_DEV_OFFBOARDis not set
#CONFIG_BLK_DEV_IDEDMA_FORCEDis not setCONFIG_IDEDMA_PCI_AUTO=y
#CONFIG_IDEDMA_ONLYDISKis not setCONFIG_BLK_DEV_IDEDMA=y
#CONFIG_IDEDMA_PCI_WIPis not set
#CONFIG_BLK_DEV_IDEDMA_TIMEOUTis not set
#CONFIG_IDEDMA_NEW_DRIVE_LISTINGSis not setCONFIG_BLK_DEV_ADMA=y
#CONFIG_BLK_DEV_AEC62XXis not set
#CONFIG_AEC62XX_TUNINGis not set
#CONFIG_BLK_DEV_ALI15X3is not set
#CONFIG_WDC_ALI15X3is not set
#CONFIG_BLK_DEV_AMD74XXis not set
#CONFIG_AMD74XX_OVERRIDEis not set
#CONFIG_BLK_DEV_CMD64Xis not set
#CONFIG_BLK_DEV_CMD680is not set
#CONFIG_BLK_DEV_CY82C693is not set
#CONFIG_BLK_DEV_CS5530is not set
#CONFIG_BLK_DEV_HPT34Xis not set
#CONFIG_HPT34X_AUTODMAis not set
#CONFIG_BLK_DEV_HPT366is not setCONFIG_BLK_DEV_PIIX=yCONFIG_PIIX_TUNING=y
#CONFIG_BLK_DEV_NS87415is not set
#CONFIG_BLK_DEV_OPTI621is not set
#CONFIG_BLK_DEV_PDC202XXis not set
#CONFIG_PDC202XX_BURSTis not set
#CONFIG_PDC202XX_FORCEis not set
#CONFIG_BLK_DEV_SVWKSis not set
#CONFIG_BLK_DEV_SIS5513is not set
#CONFIG_BLK_DEV_SLC90E66is not set
#CONFIG_BLK_DEV_TRM290is not setCONFIG_BLK_DEV_VIA82CXXX=y
#CONFIG_IDE_CHIPSETSis not setCONFIG_IDEDMA_AUTO=y
#CONFIG_IDEDMA_IVBis not set
#CONFIG_DMA_NONPCIis not setCONFIG_BLK_DEV_IDE_MODES=y
#CONFIG_BLK_DEV_ATARAIDis not set
#CONFIG_BLK_DEV_ATARAID_PDCis not set
#CONFIG_BLK_DEV_ATARAID_HPTis not set#
# SCSI support
#CONFIG_SCSI=y
#CONFIG_BLK_DEV_SDis not set
#CONFIG_CHR_DEV_STis not set
#CONFIG_CHR_DEV_OSSTis not setCONFIG_BLK_DEV_SR=yCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_SR_EXTRA_DEVS=2CONFIG_CHR_DEV_SG=yCONFIG_SCSI_DEBUG_QUEUES=yCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=y
#CONFIG_SCSI_LOGGINGis not set#
# SCSI low-level drivers
#
#CONFIG_BLK_DEV_3W_XXXX_RAIDis not set
#CONFIG_SCSI_7000FASSTis not set
#CONFIG_SCSI_ACARDis not set
#CONFIG_SCSI_AHA152Xis not set
#CONFIG_SCSI_AHA1542is not set
#CONFIG_SCSI_AHA1740is not set
#CONFIG_SCSI_AIC7XXXis not set
#CONFIG_SCSI_AIC7XXX_OLDis not set
#CONFIG_SCSI_DPT_I2Ois not set
#CONFIG_SCSI_ADVANSYSis not set
#CONFIG_SCSI_IN2000is not set
#CONFIG_SCSI_AM53C974is not set
#CONFIG_SCSI_MEGARAIDis not set
#CONFIG_SCSI_BUSLOGICis not set
#CONFIG_SCSI_CPQFCTSis not set
#CONFIG_SCSI_DMX3191Dis not set
#CONFIG_SCSI_DTC3280is not set
#CONFIG_SCSI_EATAis not set
#CONFIG_SCSI_EATA_DMAis not set
#CONFIG_SCSI_EATA_PIOis not set
#CONFIG_SCSI_FUTURE_DOMAINis not set
#CONFIG_SCSI_GDTHis not set
#CONFIG_SCSI_GENERIC_NCR5380is not set
#CONFIG_SCSI_IPSis not set
#CONFIG_SCSI_INITIOis not set
#CONFIG_SCSI_INIA100is not set
#CONFIG_SCSI_NCR53C406Ais not set
#CONFIG_SCSI_NCR53C7xxis not set
#CONFIG_SCSI_SYM53C8XX_2is not set
#CONFIG_SCSI_NCR53C8XXis not setCONFIG_SCSI_SYM53C8XX=mCONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32CONFIG_SCSI_NCR53C8XX_SYNC=20
#CONFIG_SCSI_NCR53C8XX_PROFILEis not set
#CONFIG_SCSI_NCR53C8XX_IOMAPPEDis not set
#CONFIG_SCSI_NCR53C8XX_PQS_PDSis not set
#CONFIG_SCSI_PAS16is not set
#CONFIG_SCSI_PCI2000is not set
#CONFIG_SCSI_PCI2220Iis not set
#CONFIG_SCSI_PSI240Iis not set
#CONFIG_SCSI_QLOGIC_FASis not set
#CONFIG_SCSI_QLOGIC_ISPis not set
#CONFIG_SCSI_QLOGIC_FCis not set
#CONFIG_SCSI_QLOGIC_1280is not set
#CONFIG_SCSI_SEAGATEis not set
#CONFIG_SCSI_SIM710is not set
#CONFIG_SCSI_SYM53C416is not set
#CONFIG_SCSI_DC390Tis not set
#CONFIG_SCSI_T128is not set
#CONFIG_SCSI_U14_34Fis not set
#CONFIG_SCSI_ULTRASTORis not set#
# PCMCIA SCSI adapter support
#
#CONFIG_SCSI_PCMCIAis not set#
# Fusion MPT device support
#
#CONFIG_FUSIONis not set
#CONFIG_FUSION_BOOTis not set
#CONFIG_FUSION_ISENSEis not set
#CONFIG_FUSION_CTLis not set
#CONFIG_FUSION_LANis not set#
# I2O device support
#
#CONFIG_I2Ois not set
#CONFIG_I2O_PCIis not set
#CONFIG_I2O_BLOCKis not set
#CONFIG_I2O_LANis not set
#CONFIG_I2O_SCSIis not set
#CONFIG_I2O_PROCis not set#
# Network device support
#CONFIG_NETDEVICES=y#
# ARCnet devices
#
#CONFIG_ARCNETis not setCONFIG_DUMMY=m
#CONFIG_BONDINGis not set
#CONFIG_EQUALIZERis not set
#CONFIG_TUNis not set
#CONFIG_NET_SB1000is not set#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=y
#CONFIG_SUNLANCEis not set
#CONFIG_HAPPYMEALis not set
#CONFIG_SUNBMACis not set
#CONFIG_SUNQEis not set
#CONFIG_SUNGEMis not setCONFIG_NET_VENDOR_3COM=y
#CONFIG_EL1is not set
#CONFIG_EL2is not set
#CONFIG_ELPLUSis not set
#CONFIG_EL16is not set
#CONFIG_EL3is not set
#CONFIG_3C515is not set
#CONFIG_ELMCis not set
#CONFIG_ELMC_IIis not setCONFIG_VORTEX=y
#CONFIG_LANCEis not set
#CONFIG_NET_VENDOR_SMCis not set
#CONFIG_NET_VENDOR_RACALis not set
#CONFIG_AT1700is not set
#CONFIG_DEPCAis not set
#CONFIG_HP100is not set
#CONFIG_NET_ISAis not setCONFIG_NET_PCI=y
#CONFIG_PCNET32is not set
#CONFIG_ADAPTEC_STARFIREis not set
#CONFIG_AC3200is not set
#CONFIG_APRICOTis not set
#CONFIG_CS89x0is not set
#CONFIG_TULIPis not set
#CONFIG_TC35815is not set
#CONFIG_DE4X5is not set
#CONFIG_DGRSis not set
#CONFIG_DM9102is not setCONFIG_EEPRO100=y
#CONFIG_LNE390is not set
#CONFIG_FEALNXis not set
#CONFIG_NATSEMIis not set
#CONFIG_NE2K_PCIis not set
#CONFIG_NE3210is not set
#CONFIG_ES3210is not set
#CONFIG_8139CPis not set
#CONFIG_8139TOOis not set
#CONFIG_8139TOO_PIOis not set
#CONFIG_8139TOO_TUNE_TWISTERis not set
#CONFIG_8139TOO_8129is not set
#CONFIG_8139_NEW_RX_RESETis not set
#CONFIG_SIS900is not set
#CONFIG_EPIC100is not set
#CONFIG_SUNDANCEis not set
#CONFIG_TLANis not set
#CONFIG_VIA_RHINEis not set
#CONFIG_VIA_RHINE_MMIOis not set
#CONFIG_WINBOND_840is not set
#CONFIG_NET_POCKETis not set#
# Ethernet (1000 Mbit)
#
#CONFIG_ACENICis not set
#CONFIG_DL2Kis not set
#CONFIG_MYRI_SBUSis not set
#CONFIG_NS83820is not set
#CONFIG_HAMACHIis not set
#CONFIG_YELLOWFINis not set
#CONFIG_SK98LINis not set
#CONFIG_TIGON3is not set
#CONFIG_FDDIis not set
#CONFIG_PLIPis not setCONFIG_PPP=m
#CONFIG_PPP_MULTILINKis not set
#CONFIG_PPP_FILTERis not setCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_BSDCOMP=m
#CONFIG_PPPOATMis not set
#CONFIG_SLIPis not set#
# Wireless LAN (non-hamradio)
#
#CONFIG_NET_RADIOis not set#
# Token Ring devices
#
#CONFIG_TRis not set
#CONFIG_NET_FCis not set#
# Wan interfaces
#
#CONFIG_WANis not set#
# PCMCIA network device support
#
#CONFIG_NET_PCMCIAis not set#
# Amateur Radio support
#
#CONFIG_HAMRADIOis not set#
# IrDA (infrared) support
#
#CONFIG_IRDAis not set#
# ISDN subsystem
#
#CONFIG_ISDNis not set#
# Old CD-ROM drivers (not SCSI, not IDE)
#
#CONFIG_CD_NO_IDESCSIis not set#
# Input core support
#
#CONFIG_INPUTis not set
#CONFIG_INPUT_KEYBDEVis not set
#CONFIG_INPUT_MOUSEDEVis not set
#CONFIG_INPUT_JOYDEVis not set
#CONFIG_INPUT_EVDEVis not set#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_SERIAL=y
#CONFIG_SERIAL_CONSOLEis not set
#CONFIG_SERIAL_EXTENDEDis not setCONFIG_SERIAL_NONSTANDARD=y
#CONFIG_COMPUTONEis not set
#CONFIG_ROCKETPORTis not set
#CONFIG_CYCLADESis not set
#CONFIG_DIGIEPCAis not set
#CONFIG_DIGIis not set
#CONFIG_ESPSERIALis not set
#CONFIG_MOXA_INTELLIOis not set
#CONFIG_MOXA_SMARTIOis not set
#CONFIG_SYNCLINKis not setCONFIG_N_HDLC=m
#CONFIG_RISCOM8is not set
#CONFIG_SPECIALIXis not set
#CONFIG_SXis not set
#CONFIG_RIOis not set
#CONFIG_STALDRVis not setCONFIG_UNIX98_PTYS=yCONFIG_UNIX98_PTY_COUNT=256#
# I2C support
#
#CONFIG_I2Cis not set#
# Mice
#
#CONFIG_BUSMOUSEis not setCONFIG_MOUSE=yCONFIG_PSMOUSE=y
#CONFIG_82C710_MOUSEis not set
#CONFIG_PC110_PADis not set
#CONFIG_MK712_MOUSEis not set#
# Joysticks
#
#CONFIG_INPUT_GAMEPORTis not set
#CONFIG_QIC02_TAPEis not set#
# Watchdog Cards
#
#CONFIG_WATCHDOGis not set
#CONFIG_AMD_RNGis not setCONFIG_INTEL_RNG=m
#CONFIG_NVRAMis not setCONFIG_RTC=m
#CONFIG_DTLKis not set
#CONFIG_R3964is not set
#CONFIG_APPLICOMis not set#
# Ftape, the floppy tape device driver
#
#CONFIG_FTAPEis not setCONFIG_AGP=yCONFIG_AGP_INTEL=yCONFIG_AGP_I810=yCONFIG_AGP_VIA=yCONFIG_AGP_AMD=yCONFIG_AGP_SIS=yCONFIG_AGP_ALI=y
#CONFIG_AGP_SWORKSis not setCONFIG_DRM=y
#CONFIG_DRM_OLDis not setCONFIG_DRM_NEW=yCONFIG_DRM_TDFX=y
#CONFIG_DRM_R128is not setCONFIG_DRM_RADEON=y
#CONFIG_DRM_I810is not set
#CONFIG_DRM_MGAis not set
#CONFIG_DRM_SISis not set#
# PCMCIA character devices
#
#CONFIG_PCMCIA_SERIAL_CSis not set
#CONFIG_MWAVEis not set#
# Multimedia devices
#
#CONFIG_VIDEO_DEVis not set#
# File systems
#
#CONFIG_QUOTAis not set
#CONFIG_AUTOFS_FSis not setCONFIG_AUTOFS4_FS=y
#CONFIG_REISERFS_FSis not set
#CONFIG_REISERFS_CHECKis not set
#CONFIG_REISERFS_PROC_INFOis not set
#CONFIG_ADFS_FSis not set
#CONFIG_ADFS_FS_RWis not set
#CONFIG_AFFS_FSis not set
#CONFIG_HFS_FSis not set
#CONFIG_BFS_FSis not setCONFIG_EXT3_FS=yCONFIG_JBD=yCONFIG_JBD_DEBUG=yCONFIG_FAT_FS=mCONFIG_MSDOS_FS=m
#CONFIG_UMSDOS_FSis not setCONFIG_VFAT_FS=m
#CONFIG_EFS_FSis not set
#CONFIG_JFFS_FSis not set
#CONFIG_JFFS2_FSis not set
#CONFIG_CRAMFSis not setCONFIG_TMPFS=yCONFIG_RAMFS=yCONFIG_ISO9660_FS=yCONFIG_JOLIET=y
#CONFIG_ZISOFSis not setCONFIG_MINIX_FS=m
#CONFIG_VXFS_FSis not set
#CONFIG_NTFS_FSis not set
#CONFIG_NTFS_RWis not set
#CONFIG_HPFS_FSis not setCONFIG_PROC_FS=y
#CONFIG_DEVFS_FSis not set
#CONFIG_DEVFS_MOUNTis not set
#CONFIG_DEVFS_DEBUGis not setCONFIG_DEVPTS_FS=y
#CONFIG_QNX4FS_FSis not set
#CONFIG_QNX4FS_RWis not set
#CONFIG_ROMFS_FSis not setCONFIG_EXT2_FS=y
#CONFIG_SYSV_FSis not set
#CONFIG_UDF_FSis not set
#CONFIG_UDF_RWis not set
#CONFIG_UFS_FSis not set
#CONFIG_UFS_FS_WRITEis not set#
# Network File Systems
#
#CONFIG_CODA_FSis not set
#CONFIG_INTERMEZZO_FSis not setCONFIG_NFS_FS=yCONFIG_NFS_V3=y
#CONFIG_ROOT_NFSis not setCONFIG_NFSD=yCONFIG_NFSD_V3=yCONFIG_SUNRPC=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_SMB_FS=m
#CONFIG_SMB_NLS_DEFAULTis not set
#CONFIG_NCP_FSis not set
#CONFIG_NCPFS_PACKET_SIGNINGis not set
#CONFIG_NCPFS_IOCTL_LOCKINGis not set
#CONFIG_NCPFS_STRONGis not set
#CONFIG_NCPFS_NFS_NSis not set
#CONFIG_NCPFS_OS2_NSis not set
#CONFIG_NCPFS_SMALLDOSis not set
#CONFIG_NCPFS_NLSis not set
#CONFIG_NCPFS_EXTRASis not set
#CONFIG_ZISOFS_FSis not set
#CONFIG_ZLIB_FS_INFLATEis not set#
# Partition Types
#
#CONFIG_PARTITION_ADVANCEDis not setCONFIG_MSDOS_PARTITION=yCONFIG_SMB_NLS=yCONFIG_NLS=y#
# Native Language Support
#CONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=m
#CONFIG_NLS_CODEPAGE_737is not set
#CONFIG_NLS_CODEPAGE_775is not set
#CONFIG_NLS_CODEPAGE_850is not setCONFIG_NLS_CODEPAGE_852=m
#CONFIG_NLS_CODEPAGE_855is not set
#CONFIG_NLS_CODEPAGE_857is not set
#CONFIG_NLS_CODEPAGE_860is not set
#CONFIG_NLS_CODEPAGE_861is not set
#CONFIG_NLS_CODEPAGE_862is not set
#CONFIG_NLS_CODEPAGE_863is not set
#CONFIG_NLS_CODEPAGE_864is not set
#CONFIG_NLS_CODEPAGE_865is not set
#CONFIG_NLS_CODEPAGE_866is not set
#CONFIG_NLS_CODEPAGE_869is not set
#CONFIG_NLS_CODEPAGE_936is not set
#CONFIG_NLS_CODEPAGE_950is not setCONFIG_NLS_CODEPAGE_932=m
#CONFIG_NLS_CODEPAGE_949is not set
#CONFIG_NLS_CODEPAGE_874is not set
#CONFIG_NLS_ISO8859_8is not set
#CONFIG_NLS_CODEPAGE_1250is not set
#CONFIG_NLS_CODEPAGE_1251is not setCONFIG_NLS_ISO8859_1=m
#CONFIG_NLS_ISO8859_2is not set
#CONFIG_NLS_ISO8859_3is not set
#CONFIG_NLS_ISO8859_4is not set
#CONFIG_NLS_ISO8859_5is not set
#CONFIG_NLS_ISO8859_6is not set
#CONFIG_NLS_ISO8859_7is not set
#CONFIG_NLS_ISO8859_9is not set
#CONFIG_NLS_ISO8859_13is not set
#CONFIG_NLS_ISO8859_14is not set
#CONFIG_NLS_ISO8859_15is not set
#CONFIG_NLS_KOI8_Ris not set
#CONFIG_NLS_KOI8_Uis not setCONFIG_NLS_UTF8=m#
# Console drivers
#CONFIG_VGA_CONSOLE=y
#CONFIG_VIDEO_SELECTis not set#
# Sound
#CONFIG_SOUND=y
#CONFIG_SOUND_BT878is not set
#CONFIG_SOUND_CMPCIis not setCONFIG_SOUND_EMU10K1=m
#CONFIG_MIDI_EMU10K1is not set
#CONFIG_SOUND_FUSIONis not set
#CONFIG_SOUND_CS4281is not set
#CONFIG_SOUND_ES1370is not set
#CONFIG_SOUND_ES1371is not set
#CONFIG_SOUND_ESSSOLO1is not set
#CONFIG_SOUND_MAESTROis not set
#CONFIG_SOUND_MAESTRO3is not set
#CONFIG_SOUND_ICHis not set
#CONFIG_SOUND_RME96XXis not set
#CONFIG_SOUND_SONICVIBESis not set
#CONFIG_SOUND_TRIDENTis not set
#CONFIG_SOUND_MSNDCLASis not set
#CONFIG_SOUND_MSNDPINis not set
#CONFIG_SOUND_VIA82CXXXis not set
#CONFIG_MIDI_VIA82CXXXis not set
#CONFIG_SOUND_OSSis not set
#CONFIG_SOUND_TVMIXERis not set#
# USB support
#CONFIG_USB=y
#CONFIG_USB_DEBUGis not set
#CONFIG_USB_DEVICEFSis not set
#CONFIG_USB_BANDWIDTHis not set
#CONFIG_USB_LONG_TIMEOUTis not set
#CONFIG_USB_EHCI_HCDis not setCONFIG_USB_UHCI_ALT=y
#CONFIG_USB_OHCIis not set
#CONFIG_USB_AUDIOis not set
#CONFIG_USB_EMI26is not set
#CONFIG_USB_BLUETOOTHis not set
#CONFIG_USB_STORAGEis not set
#CONFIG_USB_STORAGE_DEBUGis not set
#CONFIG_USB_STORAGE_DATAFABis not set
#CONFIG_USB_STORAGE_FREECOMis not set
#CONFIG_USB_STORAGE_ISD200is not set
#CONFIG_USB_STORAGE_DPCMis not set
#CONFIG_USB_STORAGE_HP8200eis not set
#CONFIG_USB_STORAGE_SDDR09is not set
#CONFIG_USB_STORAGE_JUMPSHOTis not set
#CONFIG_USB_ACMis not setCONFIG_USB_PRINTER=m
#CONFIG_USB_HIDis not set
#CONFIG_USB_HIDINPUTis not set
#CONFIG_USB_HIDDEVis not set
#CONFIG_USB_KBDis not set
#CONFIG_USB_MOUSEis not set
#CONFIG_USB_WACOMis not set
#CONFIG_USB_DC2XXis not set
#CONFIG_USB_MDC800is not setCONFIG_USB_SCANNER=m
#CONFIG_USB_MICROTEKis not set
#CONFIG_USB_HPUSBSCSIis not set
#CONFIG_USB_PEGASUSis not set
#CONFIG_USB_RTL8150is not set
#CONFIG_USB_KAWETHis not set
#CONFIG_USB_CATCis not set
#CONFIG_USB_CDCETHERis not set
#CONFIG_USB_USBNETis not set
#CONFIG_USB_USS720is not set#
# USB Serial Converter support
#
#CONFIG_USB_SERIALis not set
#CONFIG_USB_SERIAL_GENERICis not set
#CONFIG_USB_SERIAL_BELKINis not set
#CONFIG_USB_SERIAL_WHITEHEATis not set
#CONFIG_USB_SERIAL_DIGI_ACCELEPORTis not set
#CONFIG_USB_SERIAL_EMPEGis not set
#CONFIG_USB_SERIAL_FTDI_SIOis not set
#CONFIG_USB_SERIAL_VISORis not set
#CONFIG_USB_SERIAL_IPAQis not set
#CONFIG_USB_SERIAL_IRis not set
#CONFIG_USB_SERIAL_EDGEPORTis not set
#CONFIG_USB_SERIAL_KEYSPAN_PDAis not set
#CONFIG_USB_SERIAL_KEYSPANis not set
#CONFIG_USB_SERIAL_KEYSPAN_USA28is not set
#CONFIG_USB_SERIAL_KEYSPAN_USA28Xis not set
#CONFIG_USB_SERIAL_KEYSPAN_USA28XAis not set
#CONFIG_USB_SERIAL_KEYSPAN_USA28XBis not set
#CONFIG_USB_SERIAL_KEYSPAN_USA19is not set
#CONFIG_USB_SERIAL_KEYSPAN_USA18Xis not set
#CONFIG_USB_SERIAL_KEYSPAN_USA19Wis not set
#CONFIG_USB_SERIAL_KEYSPAN_USA49Wis not set
#CONFIG_USB_SERIAL_MCT_U232is not set
#CONFIG_USB_SERIAL_KLSIis not set
#CONFIG_USB_SERIAL_PL2303is not set
#CONFIG_USB_SERIAL_CYBERJACKis not set
#CONFIG_USB_SERIAL_XIRCOMis not set
#CONFIG_USB_SERIAL_OMNINETis not set
#CONFIG_USB_RIO500is not set
#CONFIG_USB_AUERSWALDis not set
#CONFIG_USB_BRLVGERis not set#
# Bluetooth support
#
#CONFIG_BLUEZis not set#
# Kernel hacking
#
#CONFIG_DEBUG_KERNELis not set
Signature · 5 lines
-Steven In a time of universal deceit, telling the truth is a revolutionary act. -- George Orwell This concept of "wuv" confuses and infuriates us! -- Lur of Omicron Persei VIII