Skip to contentSkip to conversation

RedHat 7.3 kernel fix

DISCUSSION Matt Simonsen 2 participants 3 messages Aug 15, 2002

lore
Share & tools
lore
#0 lore raw

I am hoping there are some out there using RedHat 7.3 on a DL380. We are trying to do so, I have got 3 kernel panics in a week.

The setup is basically completely stock, I did do the 2.4.18-5 kernel upgrade, basically running the RPM, then changing the lilo.conf to point to the new kernel files and running /sbin/lilo.

I did not install 2.4.18-4 which mentions the SMP kernel panic explicitly - should I have installed this before the -5 kernel? From the errata it seems the -4 is superseded by -5 implying I didn't need it. Also, should I be using the drivers on Compaq's site? My previous setup was/is RedHat 6.2 with a 2.4.17 kernel and that worked beautifully.

At this point the machine known good hardware, although I moved some RAM into it along with the OS move and I'm just not sure where to go. It's in a data center so getting the on screen dump isn't easy, while there is nothing in the logs.

I'm sorry I haven't provided much info - it's all I have, though. Perhaps I'm just looking for somebody who has used the same OS and hardware combo to let me know for sure it works.

Thanks
Matt

#1 lore raw
Quoted 3 lines · Matt Simonsen

I did not install 2.4.18-4 which mentions the SMP kernel panic explicitly - should I have installed this before the -5 kernel? From the errata it seems the -4 is superseded by -5 implying I didn't need it.

Correct

Quoted 1 line

Also, should I be using the drivers on Compaq's site? My previous setup

Shouldnt need to for standard PC hardware

Quoted 2 lines

At this point the machine known good hardware, although I moved some RAM into it along with the OS move and I'm just not sure where to go. It's

So you moved some RAM and it started crashing randomly. Does it pass memtest 86 (3.0 or higher for ECC RAM)

Alan

#2 lore raw
Quoted 6 lines · Alan Cox
Quoted 2 lines · Matt Simonsen

At this point the machine known good hardware, although I moved some RAM into it along with the OS move and I'm just not sure where to go. It's

So you moved some RAM and it started crashing randomly. Does it pass memtest 86 (3.0 or higher for ECC RAM)

I wouldn't say I moved RAM and it just started crashing - I also did an upgrade from RedHat 6.2 w/ 2.4.17 kernel to a stock (and patched) RedHat 7.3 setup. I was suspecting maybe the kernel fix didn't work or something - but it does register as 2.4.18-5.... I suppose that is just wishful thinking so we don't have to swap out the machine.

At this point it seems clear I need to swap out the hardware, if not for any other reason because it is a production machine so I can't run memtest 86 just yet.

On the new machine I suppose I will run the stock RedHat kernel. If the replacement crashes, perhaps I will switch kernels and see if it persists.

Thanks for your reply-
Matt

Quoted 3 lines

Alan