i810_audio, i845 updates

PATCH New Juergen Sawinski 1 participant 1 message Aug 28, 2002

Share & tools

Juergen Sawinski

author

2002-08-28 00:16 UTC #0 lore raw

PATCH 1/1 i810_audio, i845 updates

-implement a codec ID <-> IO register offset mapping -in i810_ioctl, case SNDCTL_DSP_CHANNELS: only touch bits 20:21
off GLOB_CNT (multichannel capabilities)
-AMD 8111 has 6 hw channels so I must have mmio (but I don't have
any docs to verify this)
-minor fixes

Signature · 13 lines

Juergen "George" Sawinski
Max-Planck Institute for Medical Research
Dept. of Biomedical Optics
Jahnstr. 29
D-69120 Heidelberg
Germany

Phone:  +49-6221-486-308
Fax:    +49-6221-486-325

priv.
Phone:  +49-6221-418 858
Mobile: +49-171-532 5302

drivers/sound/i810_audio.c +32 ~~-29~~

@@ -69,12 +69,12 @@
  *
  *  ICH 4 caveats
  *
- *      The ICH4 has the feature, that the codec ID may not be congruent 
- *      with the AC-link channel.
+ *      The ICH4 has the feature, that the codec ID doesn't have to be 
+ *      congruent with the IO connection.
  * 
- *      Right now, the codec ID is not the real codec ID but the AC-link
- *      channel. A ID <-> AC-link mapping has still to be implemented.
- *      
+ *      Therefore, from driver version 0.23 on, there is a "codec ID" <->
+ *      "IO register base offset" mapping (card->ac97_id_map) field.
+ *   
  *      Juergen "George" Sawinski (jsaw) 
  */

@@ -207,7 +207,7 @@
 	CAS	 = 	0x34			/* Codec Write Semaphore Register */
 };
 
-ENUM_ENGINE(MC2,4);     /* Mic. 2 */
+ENUM_ENGINE(MC2,4);     /* Mic In 2 */
 ENUM_ENGINE(PI2,5);     /* PCM In 2 */
 ENUM_ENGINE(SP,6);      /* S/PDIF */

@@ -234,8 +234,7 @@
 #define INT_GPI		(1<<0)
 #define INT_MASK (INT_SEC|INT_PRI|INT_MC|INT_PO|INT_PI|INT_MO|INT_NI|INT_GPI)
 
-
-#define DRIVER_VERSION "0.22"
+#define DRIVER_VERSION "0.23"
 
 /* magic numbers to protect our data structures */
 #define I810_CARD_MAGIC		0x5072696E /* "Prin" */

@@ -295,7 +294,7 @@
 	/*@FIXME to be verified*/	{  2, 0x0000 }, /* SI7012 */
 	/*@FIXME to be verified*/	{  2, 0x0000 }, /* NVIDIA_NFORCE */
 	/*@FIXME to be verified*/	{  2, 0x0000 }, /* AMD768 */
-	/*@FIXME to be verified*/	{  2, 0x0000 }, /* AMD8111 */
+	/*@FIXME to be verified*/	{  3, 0x0001 }, /* AMD8111 */
 };
 
 static struct pci_device_id i810_pci_tbl [] __initdata = {

@@ -417,6 +416,7 @@
 	int dev_audio;
 
 	/* structures for abstraction of hardware facilities, codecs, banks and channels*/
+	u16    ac97_id_map[NR_AC97];
 	struct ac97_codec *ac97_codec[NR_AC97];
 	struct i810_state *states[NR_HW_CH];
 	struct i810_channel *channel;	/* 1:1 to states[] but diff. lifetime */

@@ -449,6 +449,9 @@
 	int initializing;
 };
 
+/* extract register offset from codec struct */
+#define IO_REG_OFF(codec) (((struct i810_card *) codec->private_data)->ac97_id_map[codec->id])
+
 static struct i810_card *devs = NULL;
 
 static int i810_open_mixdev(struct inode *inode, struct file *file);

@@ -1948,13 +1955,13 @@
 
 		switch ( val ) {
 			case 2: /* 2 channels is always supported */
-				outl(i_glob_cnt & 0xcfffff,
+				outl(i_glob_cnt & 0xffcfffff,
 				     state->card->iobase + GLOB_CNT);
 				/* Do we need to change mixer settings????  */
 				break;
 			case 4: /* Supported on some chipsets, better check first */
 				if ( state->card->channels >= 4 ) {
-					outl((i_glob_cnt & 0xcfffff) | 0x100000,
+					outl((i_glob_cnt & 0xffcfffff) | 0x100000,
 					      state->card->iobase + GLOB_CNT);
 					/* Do we need to change mixer settings??? */
 				} else {

@@ -1963,7 +1970,7 @@
 				break;
 			case 6: /* Supported on some chipsets, better check first */
 				if ( state->card->channels >= 6 ) {
-					outl((i_glob_cnt & 0xcfffff) | 0x200000,
+					outl((i_glob_cnt & 0xffcfffff) | 0x200000,
 					      state->card->iobase + GLOB_CNT);
 					/* Do we need to change mixer settings??? */
 				} else {

@@ -2553,8 +2560,7 @@
 {
 	struct i810_card *card = dev->private_data;
 	int count = 100;
-	u16 reg_set = ((u16) reg) & 0x7f;
-	reg_set |= ((u16) dev->id) << 7;
+	u16 reg_set = IO_REG_OFF(dev) | (reg&0x7f);
 	
 	while(count-- && (readb(card->iobase_mmio + CAS) & 1)) 
 		udelay(1);

@@ -2574,7 +2580,7 @@
 {
 	struct i810_card *card = dev->private_data;
 	int count = 100;
-	u8 reg_set = ((dev->id)?((reg&0x7f)|0x80):(reg&0x7f));
+	u16 reg_set = IO_REG_OFF(dev) | (reg&0x7f);
 	
 	while(count-- && (inb(card->iobase + CAS) & 1)) 
 		udelay(1);

@@ -2586,8 +2592,7 @@
 {
 	struct i810_card *card = dev->private_data;
 	int count = 100;
-	u16 reg_set = ((u16) reg) & 0x7f;
-	reg_set |= ((u16) dev->id) << 7;
+	u16 reg_set = IO_REG_OFF(dev) | (reg&0x7f);
 	
 	while(count-- && (readb(card->iobase_mmio + CAS) & 1)) 
 		udelay(1);

@@ -2603,7 +2608,7 @@
 {
 	struct i810_card *card = dev->private_data;
 	int count = 100;
-	u8 reg_set = ((dev->id)?((reg&0x7f)|0x80):(reg&0x7f));
+	u16 reg_set = IO_REG_OFF(dev) | (reg&0x7f);
 	
 	while(count-- && (inb(card->iobase + CAS) & 1)) 
 		udelay(1);

@@ -2779,7 +2784,7 @@
 	if ((card->pci_id == PCI_DEVICE_ID_INTEL_ICH4)
 	    && (card->use_mmio)) {
 		primary_codec_id = (int) readl(card->iobase_mmio + SDM) & 0x3;
-		printk(KERN_INFO "i810_audio: primary codec id %d\n",
+		printk(KERN_INFO "i810_audio: Primary codec has ID %d\n",
 		       primary_codec_id);
 	}

@@ -2803,6 +2808,7 @@
 	int num_ac97 = 0;
 	int ac97_id;
 	int total_channels = 0;
+	int nr_ac97_max = card_cap[card->pci_id_internal].nr_ac97;
 	struct ac97_codec *codec;
 	u16 eid;
 	u32 reg;

@@ -2828,13 +2834,15 @@
 	reg = inl(card->iobase + GLOB_CNT);
 	outl(reg & 0xffcfffff, card->iobase + GLOB_CNT);
 		
-	for (num_ac97 = 0; num_ac97 < card_cap[card->pci_id_internal].nr_ac97; num_ac97++) {
+	for (num_ac97 = 0; num_ac97 < NR_AC97; num_ac97++) 
 		card->ac97_codec[num_ac97] = NULL;
-	}
 
-	for (num_ac97 = 0; num_ac97 < card_cap[card->pci_id_internal].nr_ac97; num_ac97++) {
+	/*@FIXME I don't know, if I'm playing to safe here... (jsaw) */
+	if ((nr_ac97_max > 2) && !card->use_mmio) nr_ac97_max = 2;
+
+	for (num_ac97 = 0; num_ac97 < nr_ac97_max; num_ac97++) {
 		/* codec reset */
-		printk(KERN_INFO "i810_audio: resetting hw channel %d\n", num_ac97);
+		printk(KERN_INFO "i810_audio: Resetting connection %d\n", num_ac97);
 		if (card->use_mmio) readw(card->ac97base_mmio + 0x80*num_ac97);
 		else inw(card->ac97base + 0x80*num_ac97);

@@ -2846,7 +2854,7 @@
 		if ((card->pci_id == PCI_DEVICE_ID_INTEL_ICH4)
 		    && (card->use_mmio)) {
 			ac97_id = (int) readl(card->iobase_mmio + SDM) & 0x3;
-			printk(KERN_INFO "i810_audio: hw channel %d, codec id %d\n",
+			printk(KERN_INFO "i810_audio: Connection %d with codec id %d\n",
 			       num_ac97, ac97_id);
 		}
 		else {

@@ -2869,9 +2877,8 @@
 		/* initialize some basic codec information, other fields will be filled
 		   in ac97_probe_codec */
 		codec->private_data = card;
-
-		/*@FIXME this will lead to problems!!! id=2 <-> io offset=0*/
-		codec->id = num_ac97;
+		codec->id = ac97_id;
+		card->ac97_id_map[ac97_id] = num_ac97 * 0x80;
 
 		if (card->use_mmio) {	
 			codec->codec_read = i810_ac97_get_mmio;

@@ -2883,7 +2890,7 @@
 		}
 	
 		if(!i810_ac97_probe_and_powerup(card,codec)) {
-			printk(KERN_ERR "i810_audio: timed out waiting for codec %d analog ready.\n", num_ac97);
+			printk(KERN_ERR "i810_audio: timed out waiting for codec %d analog ready.\n", ac97_id);
 			kfree(codec);
 			break;	/* it didn't work */
 		}

@@ -2903,7 +2910,7 @@
 		codec->codec_write(codec, AC97_EXTENDED_MODEM_ID, 0L);
 		if(codec->codec_read(codec, AC97_EXTENDED_MODEM_ID))
 		{
-			printk(KERN_WARNING "i810_audio: codec %d is a softmodem - skipping.\n", num_ac97);
+			printk(KERN_WARNING "i810_audio: codec %d is a softmodem - skipping.\n", ac97_id);
 			kfree(codec);
 			continue;
 		}