virtual ethernet adapter?
Is there any open code that is similiar to what vmware provides that enables one to create virtual ethernet adapters? I've seen the tap device, but that's not what I need.
thanks,
shaya potter
Quoted 3 lines · Shaya Potter
Is there any open code that is similiar to what vmware provides that enables one to create virtual ethernet adapters? I've seen the tap device, but that's not what I need.
In what way is it not what you need? What do you need?
Peter
--
Peter Svensson ! Pgp key available by finger, fingerprint:
<[email protected]> ! 8A E9 20 98 C1 FF 43 E3 07 FD B9 0A 80 72 70 AF
------------------------------------------------------------------------
Remember, Luke, your source will be with you... always...
from what I can tell, tap just lets a programs use it, but one needs a user space app behind it (reading and writing to it). It doesn't seem to have the ability to live on the network like vmware's vmnet stuff does, perhaps I'm wrong and was confused by the web page.
Quoted 15 lines · Peter Svensson
Quoted 3 lines · Shaya Potter
Is there any open code that is similiar to what vmware provides that enables one to create virtual ethernet adapters? I've seen the tap device, but that's not what I need.
In what way is it not what you need? What do you need?
Peter
--
Peter Svensson ! Pgp key available by finger, fingerprint:
<[email protected]> ! 8A E9 20 98 C1 FF 43 E3 07 FD B9 0A 80 72 70 AF
------------------------------------------------------------------------
Remember, Luke, your source will be with you... always...
Quoted 4 lines · Shaya Potter
from what I can tell, tap just lets a programs use it, but one needs a user space app behind it (reading and writing to it). It doesn't seem to have the ability to live on the network like vmware's vmnet stuff does, perhaps I'm wrong and was confused by the web page.
Well, you want at program to read and write ethernet frames, don't you? To What happens is that the operating system sees the data written by the program as coming in over a ethernet interface, a virtual one.
To connect that interface to a real one you use the bridging code. I think it is standard in the newer kernels. Otherwise you can download it from
http://bridge.sourceforge.net/. Create a bridge and attach both the real ethernet card and the virtual one to it and use the resulting interface br0 (or whatever you choose to call it) instead of the normal ethernet interface. Your program that is attached to the "tap" will now appear as another computer on the same ethernet segment to both your computer and all others attachet the the segment.
Peter
--
Peter Svensson ! Pgp key available by finger, fingerprint:
<[email protected]> ! 8A E9 20 98 C1 FF 43 E3 07 FD B9 0A 80 72 70 AF
------------------------------------------------------------------------
Remember, Luke, your source will be with you... always...
Quoted 3 lines · Peter Svensson
Quoted 1 line · Shaya Potter
from what I can tell, tap just lets a programs use it, but one needs
a
Quoted 1 line
Quoted 1 line
user space app behind it (reading and writing to it). It doesn't
seem
Quoted 4 lines
Quoted 2 lines
to have the ability to live on the network like vmware's vmnet stuff does, perhaps I'm wrong and was confused by the web page.
Well, you want at program to read and write ethernet frames, don't
you? To
Quoted 4 lines
What happens is that the operating system sees the data written by the program as coming in over a ethernet interface, a virtual one.
To connect that interface to a real one you use the bridging code. I
think
Quoted 1 line
it is standard in the newer kernels. Otherwise you can download it
from
Quoted 1 line
http://bridge.sourceforge.net/. Create a bridge and attach both the
real
Quoted 1 line
ethernet card and the virtual one to it and use the resulting
interface
Quoted 2 lines
br0 (or whatever you choose to call it) instead of the normal ethernet interface. Your program that is attached to the "tap" will now appear
as
Quoted 1 line
another computer on the same ethernet segment to both your computer
and
Quoted 1 line
all others attachet the the segment.
that actually sounds more promising, but does it still involves the program attached to the tap outputting ethernet frames. i.e. I can't make a virtual ethernet driver with my own rules, have netfilter bind a process to just use that adapter, and then just run the process as normal. or am I still understating the capabilities?
thanks,
shaya potter