Skip to contentSkip to conversation

Multiple firewalls

DISCUSSION darkstar 3 participants 4 messages Sep 11, 2002 1 message not in the archive

lore
Share & tools
lore

darkstar

author
#0 lore raw

I have two seperate iptables firewalls for two lines for our company.Both machines have two network cards.
Would it be advisable to combine the two into one machine with three cards..???

Thanks

#1 lore raw
Quoted 4 lines · darkstar

I have two seperate iptables firewalls for two lines for our company.Both machines have two network cards.
Would it be advisable to combine the two into one machine with three cards..???

I beleive I'd do that to simplify routing & al.

one nic for WAN 1
one for WAN 2
one for company LAN
and one for the DMZ

:-)

roy

Signature · 6 lines
Roy Sigurd Karlsbakk, Datavaktmester
ProntoTV AS - http://www.pronto.tv/
Tel: +47 9801 3356

Computers are like air conditioners.
They stop working when you open Windows.
#2 lore raw
In reply to darkstar
Quoted 4 lines · darkstar

I have two seperate iptables firewalls for two lines for our company.Both machines have two network cards.
Would it be advisable to combine the two into one machine with three cards..???

What are you trying to do with the two external links ?

How have you got your internal network set up ?

Is there any sort of redundancy / load balancing / failover going on here ?

Antony.

Signature · 3 lines
There are only 10 types of people in the world:
those who understand binary notation,
and those who don't.

A message that is not in the archive (sent off-list or not yet received): 1031757171.345.31.camel@bigblue

#4 lore raw
Quoted 7 lines · darkstar
Quoted 6 lines · Antony Stone
Quoted 4 lines · darkstar

I have two seperate iptables firewalls for two lines for our company.Both machines have two network cards.
Would it be advisable to combine the two into one machine with three cards..???

Quoted 8 lines
Quoted 6 lines

What are you trying to do with the two external links ?

How have you got your internal network set up ?

Is there any sort of redundancy / load balancing / failover going on here ?

No just two simple firewalls going into a internal network, no fail over and no load balancing

In that case I agree with Roy.

1 interface for ext1
1 interface for ext2
1 interface for int LAN
1 interface for DMZ

It'll give a good opportunity to play with iproute2 as well :-)

How are your internal clients set up to route to the Internet at present ? What determines whether they go via ext1 or ext2 ?

Antony.

Signature · 6 lines
There are two possible outcomes.

If the result confirms the hypothesis, then you've made a measurement.
If the result is contrary to the hypothesis, then you've made a discovery.

 - Enrico Fermi