Various patches to improve Secure Boot support
v5 cover Various patches to improve Secure Boot support
These patches improve support for Secure boot.
UEFI CA memory mitigation requires memory pages to be not executable and writable at the same time. So changing permissions and splitting some section is required.
Remove multiboot pieces from EFI executable.
Changes since v1:
- improved some comments;
- merged 2 pacthes removing multiboot support in x86 PE;
- removed a patch dealing with SBAT;
- other minor changes (see single patches).
Changes since v2:
- improved some comments.
Changes since v3:
- Added Acked-by;
- Improve commit message.
Changes since v4:
- Messages updates;
- Clean some dependencies cause by code removal;
- Add small commit to remove a possibly unused string.
Frediano Ziglio (3):
Align relevant sections to 4KB
x86: Split .init section to satisfy UEFI CA memory mitigation x86/boot: Exclude not used string
Roger Pau Monné (2):
x86/efi: discard multiboot and PVH support for PE binary x86/efi: avoid a relocation in efi_arch_post_exit_boot()
docs/hypervisor-guide/x86/how-xen-boots.rst | 6 ----- xen/arch/x86/boot/head.S | 10 +++++--- xen/arch/x86/efi/efi-boot.h | 7 ++++-- xen/arch/x86/xen.lds.S | 27 +++++++++++++-------- 4 files changed, 28 insertions(+), 22 deletions(-)
Signature · 1 line
2.43.0
PATCH v5 1/5 Align relevant sections to 4KB
From: Frediano Ziglio <[email protected]>
Required by UEFI CA memory mitigation.
It is a requirement for NX_COMPAT so the PE can be loaded with W^X perms in the pagetables.
NX_COMPAT is a requirement from shim-review,
https://github.com/rhboot/shim-review#do-you-have-the-nx-bit-set-in-your-shim-if-so-is-your-entire-boot-stack-nx-compatible-and-what-testing-have-you-done-to-ensure-such-compatibility
Sections with different permissions must be in separate pages. In the case of debug sections they are contiguous and have the same permissions, including the immediately preceding .reloc section, so it's not an issue if they are not aligned to the page.
Before the .debug sections you could have the .reloc or the SBAT section, either are permission-compatible.
--
Changes since v1:
- Change subject.
Changes since v2:
- Improved commit message and subject.
Changes since v3:
- Added Acked-by;
- Improved commit message.
Changes since v4:
- Added missing comment;
- Added Acked-by.
--- xen/arch/x86/xen.lds.S | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
xen/arch/x86/xen.lds.S +4 -2
@@ -162,8 +162,8 @@ SECTIONS __note_gnu_build_id_end = .; } PHDR(note) PHDR(text) #elif defined(BUILD_ID_EFI) - /* Workaround bug in binutils < 2.36 */ - . = ALIGN(32); + /* Align to satisfy UEFI CA memory mitigation. */ + . = ALIGN(PAGE_SIZE); DECL_SECTION(.buildid) { __note_gnu_build_id_start = .; *(.buildid)
@@ -330,6 +330,8 @@ SECTIONS __2M_rwdata_end = ALIGN(SECTION_ALIGN); #ifdef EFI + /* Align to satisfy UEFI CA memory mitigation. */ + . = ALIGN(PAGE_SIZE); .reloc ALIGN(4) : { __base_relocs_start = .; *(.reloc)
Signature · 1 line
2.43.0
PATCH v5 2/5 x86/efi: discard multiboot and PVH support for PE binary
In reply to Frediano ZiglioFrom: Roger Pau Monné <[email protected]>
Multiboot and PVH booting are not supported for PE, hence discards them in the linker script when doing a PE build.
That removes some relocations that otherwise appear due to the usage of the start and __efi64_mb2_start symbols in the multiboot2 header.
Section discarding is not done updating DISCARD_SECTIONS definition as the change is specific for x86.
No functional change intended.
--
Changes since v1:
- improve commit message;
- change section orders to avoid changing code order in final executable;
- merge 2 commits;
- removed deprecated documentation section.
Changes since v2:
- Update commit message, join 2 sentences together.
Changes since v3:
- Added Acked-by.
Changes since v4:
- more clear subject;
- removed more code/data from EFI output;
- removed Acked-by.
--- docs/hypervisor-guide/x86/how-xen-boots.rst | 6 ------ xen/arch/x86/boot/head.S | 8 ++++---- xen/arch/x86/xen.lds.S | 9 +++++++++ 3 files changed, 13 insertions(+), 10 deletions(-)
docs/hypervisor-guide/x86/how-xen-boots.rst +0 -6
@@ -82,12 +82,6 @@ When a PEI-capable toolchain is found, the objects are linked together and a PE32+ binary is created. It can be run directly from the EFI shell, and has ``efi_start`` as its entry symbol. -.. note:: - - xen.efi does contain all MB1/MB2/PVH tags included in the rest of the - build. However, entry via anything other than the EFI64 protocol is - unsupported, and won't work. - Boot ----
xen/arch/x86/boot/head.S +4 -4
@@ -126,7 +126,7 @@ multiboot2_header: .size multiboot2_header, . - multiboot2_header .type multiboot2_header, @object - .section .init.rodata, "a", @progbits + .section .init.rodata.multiboot, "a", @progbits .Lbad_cpu_msg: .asciz "ERR: Not a 64-bit CPU!" .Lbad_ldr_msg: .asciz "ERR: Not a Multiboot bootloader!"
@@ -135,8 +135,7 @@ multiboot2_header: .Lbag_alg_msg: .asciz "ERR: Xen must be loaded at a 2Mb boundary!" .Lno_nx_msg: .asciz "ERR: Not an NX-capable CPU!" - .section .init.data, "aw", @progbits - .subsection 1 /* Put data here after the page tables (in x86_64.S). */ + .section .init.data.multiboot, "aw", @progbits .align 4 .word 0
@@ -152,7 +151,7 @@ vga_text_buffer: efi_platform: .byte 0 - .section .init.text, "ax", @progbits + .section .init.multiboot, "ax", @progbits early_error: /* Here to improve the disassembly. */
@@ -710,6 +709,7 @@ trampoline_setup: /* Jump into the relocated trampoline. */ lret + .section .init.text, "ax", @progbits ENTRY(trampoline_start) #include "trampoline.S" ENTRY(trampoline_end)
xen/arch/x86/xen.lds.S +9 -0
@@ -57,6 +57,12 @@ SECTIONS __image_base__ = .; #else . = __image_base__; + /DISCARD/ : { + *(.text.header) + *(.init.multiboot) + *(.init.data.multiboot) + *(.init.rodata.multiboot) + } #endif #if 0
@@ -195,6 +201,7 @@ SECTIONS DECL_SECTION(.init.text) { #endif _sinittext = .; + *(.init.multiboot) *(.init.text) *(.text.startup) _einittext = .;
@@ -220,6 +227,7 @@ SECTIONS *(.init.rodata.cf_clobber) __initdata_cf_clobber_end = .; + *(.init.rodata.multiboot) *(.init.rodata) *(.init.rodata.*)
@@ -234,6 +242,7 @@ SECTIONS *(.initcall1.init) __initcall_end = .; + *(.init.data.multiboot) *(.init.data) *(.init.data.rel) *(.init.data.rel.*)
Signature · 1 line
2.43.0
Re: [PATCH v5 2/5] x86/efi: discard multiboot and PVH support for PE binary
Quoted 3 lines · Frediano Ziglio
Changes since v4:
- more clear subject;
- removed more code/data from EFI output;
I can see that you excluded a few data items in the assembly file. But is there actually any more code excluded? In particular the functions I mentioned in the v4 comments are still going to remain unreachable in the image. And addressing that doesn't look difficult at all:tools/combine_two_binaries.py would need to have .init.text replaced just like you do it in the assembly source.
Another thing is that with it now being crystal clear that the PVH entry point goes away, code reachable only when it's present (first and foremost guest/xen/pvh-boot.c) is then also unreachable. Perhaps the objcopy involved in the .o -> .init.o conversion could be customized to rename sections in our favor.
xen/arch/x86/boot/head.S multiboot2_header: · line 139
Quoted 8 lines
xen/arch/x86/boot/head.S +1
-2@@ -135,8 +135,7 @@ multiboot2_header: .Lbag_alg_msg: .asciz "ERR: Xen must be loaded at a 2Mb boundary!" .Lno_nx_msg: .asciz "ERR: Not an NX-capable CPU!" - .section .init.data, "aw", @progbits - .subsection 1 /* Put data here after the page tables (in x86_64.S). */ + .section .init.data.multiboot, "aw", @progbits .align 4
Turns out the comment must have been stale for a while.
xen/arch/x86/xen.lds.S SECTIONS · line 64
Quoted 11 lines
xen/arch/x86/xen.lds.S +5
-0@@ -57,6 +57,12 @@ SECTIONS __image_base__ = .; #else . = __image_base__; + /DISCARD/ : { + *(.text.header) + *(.init.multiboot) + *(.init.data.multiboot) + *(.init.rodata.multiboot)
Simply *(.init.*multiboot)?
Jan
PATCH v5 3/5 x86/efi: avoid a relocation in efi_arch_post_exit_boot()
In reply to Frediano ZiglioFrom: Roger Pau Monné <[email protected]>
Instead of using the absolute __start_xen address, calculate it as an offset from the current instruction pointer. The relocation would be problematic if the generated PE binary had .init.text as a standalone section with just read and execute permissions."
Removing this relocation is necessary to make it safe to split .init.
No functional change intended.
--
Changes since v1:
- Improve commit message.
Changes since v3:
- Added Acked-by.
--- xen/arch/x86/efi/efi-boot.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
xen/arch/x86/efi/efi-boot.h +5 -2
@@ -270,7 +270,9 @@ static void __init noreturn efi_arch_post_exit_boot(void)/* Jump to higher mappings. */ "mov stack_start(%%rip), %%rsp\n\t" -"movabs $__start_xen, %[rip]\n\t" +"lea __start_xen(%%rip), %[rip]\n\t" +"add %[offset], %[rip]\n\t" +"push %[cs]\n\t" "push %[rip]\n\t" "lretq"
@@ -278,7 +280,8 @@ static void __init noreturn efi_arch_post_exit_boot(void) [cr4] "+&r" (cr4) : [cr3] "r" (idle_pg_table), [cs] "i" (__HYPERVISOR_CS), - [ds] "r" (__HYPERVISOR_DS) + [ds] "r" (__HYPERVISOR_DS), + [offset] "r" (__XEN_VIRT_START - xen_phys_start) : "memory" ); unreachable(); }
Signature · 1 line
2.43.0
Re: [PATCH v5 3/5] x86/efi: avoid a relocation in efi_arch_post_exit_boot()
Quoted 6 lines · Frediano Ziglio
From: Roger Pau Monné <[email protected]>
Instead of using the absolute
__start_xenaddress, calculate it as an offset from the current instruction pointer. The relocation would be problematic if the generated PE binary had .init.text as a standalone section with just read and execute permissions."
There's a stray " at the end of the line I think.
Thanks, Roger.
PATCH v5 4/5 x86: Split .init section to satisfy UEFI CA memory mitigation
In reply to Frediano ZiglioFrom: Frediano Ziglio <[email protected]>
Currently .init section is both writeable and executable, split data and code to have 2 sections satisfying W^X rule.
It is a requirement for NX_COMPAT so the PE can be loaded with W^X perms in the pagetables.
NX_COMPAT is a requirement from shim-review,
https://github.com/rhboot/shim-review#do-you-have-the-nx-bit-set-in-your-shim-if-so-is-your-entire-boot-stack-nx-compatible-and-what-testing-have-you-done-to-ensure-such-compatibility
--
Change since v1:
- update comment style.
Changes since v3:
- Added Acked-by.
Changes since v4:
- Added Acked-by.
--- xen/arch/x86/xen.lds.S | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-)
xen/arch/x86/xen.lds.S +4 -8
@@ -195,11 +195,7 @@ SECTIONS __2M_init_start = .; /* Start of 2M superpages, mapped RWX (boot only). */ . = ALIGN(PAGE_SIZE); /* Init code and data */ __init_begin = .; -#ifdef EFI /* EFI wants to merge all of .init.* ELF doesn't. */ - DECL_SECTION(.init) { -#else DECL_SECTION(.init.text) { -#endif _sinittext = .; *(.init.multiboot) *(.init.text)
@@ -212,12 +208,12 @@ SECTIONS */ *(.altinstr_replacement) -#ifdef EFI /* EFI wants to merge all of .init.* ELF doesn't. */ - . = ALIGN(SMP_CACHE_BYTES); -#else } PHDR(text) - DECL_SECTION(.init.data) { +#ifdef EFI + /* Align to satisfy UEFI CA memory mitigation. */ + . = ALIGN(SECTION_ALIGN); #endif + DECL_SECTION(.init.data) { *(.init.bss.stack_aligned) *(.init.data.page_aligned)
Signature · 1 line
2.43.0
PATCH v5 5/5 x86/boot: Exclude not used string
In reply to Frediano ZiglioIf CONFIG_REQUIRE_NX is not enabled the string is not used.
--- xen/arch/x86/boot/head.S | 2 ++ 1 file changed, 2 insertions(+)
xen/arch/x86/boot/head.S +2 -0
@@ -133,7 +133,9 @@ multiboot2_header: .Lbad_ldr_nbs: .asciz "ERR: Bootloader shutdown EFI x64 boot services!" .Lbad_efi_msg: .asciz "ERR: EFI IA-32 platforms are not supported!" .Lbag_alg_msg: .asciz "ERR: Xen must be loaded at a 2Mb boundary!" +#ifdef CONFIG_REQUIRE_NX .Lno_nx_msg: .asciz "ERR: Not an NX-capable CPU!" +#endif .section .init.data.multiboot, "aw", @progbits .align 4
Signature · 1 line
2.43.0
Re: [PATCH v5 5/5] x86/boot: Exclude not used string
Quoted 3 lines · Frediano Ziglio
If
CONFIG_REQUIRE_NXis not enabled the string is not used.Signed-off-by Frediano Ziglio <[email protected]>
Re: [PATCH v5 5/5] x86/boot: Exclude not used string
Quoted 6 lines · Jan Beulich
Quoted 3 lines · Frediano Ziglio
If
CONFIG_REQUIRE_NXis not enabled the string is not used.Signed-off-by Frediano Ziglio <[email protected]>Reviewed-by Jan Beulich <[email protected]>
I know you're both trying to be helpful, but this patch really isn't.
You are both aware that I have a full series about NX handling in progress, which deletes more than just this, and also needs backporting.
~Andrew
Re: [PATCH v5 5/5] x86/boot: Exclude not used string
Quoted 8 lines · Andrew Cooper
Quoted 5 lines · Jan Beulich
Quoted 3 lines · Frediano Ziglio
If
CONFIG_REQUIRE_NXis not enabled the string is not used.Signed-off-by Frediano Ziglio <[email protected]>Reviewed-by Jan Beulich <[email protected]>I know you're both trying to be helpful, but this patch really isn't.
You should have said so earlier, now it's in.
Quoted 2 lines
You are both aware that I have a full series about NX handling in progress, which deletes more than just this, and also needs backporting.
That'll be impacted only marginally, afaict.
Jan