2.5.39 with contest 0.41
HP Omnibook 6000 (laptop), 256 MiB of RAM, PIII@800. Test against 2.4.19, 2.5.38-mm2, 2.5.39
What I did:
$ rebootin "kernel" apm=off single $ contest -n 3
Results:
Administrator@OIVT444P /cygdrive/log
$ cat results.log
noload:
Kernel Time CPU Ratio 2.4.19 133.07 98% 1.00 2.4.19 133.16 98% 1.00 2.4.19 135.43 97% 1.02 2.5.38-mm2 138.19 97% 1.04 2.5.38-mm2 138.47 96% 1.04 2.5.38-mm2 139.54 96% 1.05 2.5.39 138.30 96% 1.04 2.5.39 138.63 96% 1.04 2.5.39 139.99 96% 1.05
process_load:
Kernel Time CPU Ratio 2.4.19 200.43 60% 1.51 2.4.19 203.11 60% 1.53 2.4.19 203.97 59% 1.53 2.5.38-mm2 194.42 69% 1.46 2.5.38-mm2 195.19 69% 1.47 2.5.38-mm2 207.36 64% 1.56 2.5.39 190.44 70% 1.43 2.5.39 191.37 70% 1.44 2.5.39 193.60 69% 1.45
io_load:
Kernel Time CPU Ratio 2.4.19 486.58 27% 3.66 2.4.19 593.72 22% 4.46 2.4.19 637.61 21% 4.79 2.5.38-mm2 232.35 61% 1.75 2.5.38-mm2 237.83 57% 1.79 2.5.38-mm2 274.39 50% 2.06 2.5.39 242.98 57% 1.83 2.5.39 294.52 50% 2.21 2.5.39 328.01 42% 2.46
mem_load:
Kernel Time CPU Ratio 2.4.19 172.24 78% 1.29 2.4.19 174.74 77% 1.31 2.4.19 174.87 77% 1.31 2.5.38-mm2 165.53 82% 1.24 2.5.38-mm2 170.00 80% 1.28 2.5.38-mm2 171.96 79% 1.29 2.5.39 167.92 81% 1.26 2.5.39 170.80 80% 1.28 2.5.39 172.68 79% 1.30
Ciao,
Paolo
Signature · 4 lines
Get your free email from www.linuxmail.org Powered by Outblaze
Quoting Paolo Ciarrocchi <[email protected]>:
Quoted 37 lines
noload:
Kernel Time CPU Ratio 2.4.19 133.07 98% 1.00 2.4.19 133.16 98% 1.00 2.4.19 135.43 97% 1.02 2.5.38-mm2 138.19 97% 1.04 2.5.38-mm2 138.47 96% 1.04 2.5.38-mm2 139.54 96% 1.05 2.5.39 138.30 96% 1.04 2.5.39 138.63 96% 1.04 2.5.39 139.99 96% 1.05
process_load:Kernel Time CPU Ratio 2.4.19 200.43 60% 1.51 2.4.19 203.11 60% 1.53 2.4.19 203.97 59% 1.53 2.5.38-mm2 194.42 69% 1.46 2.5.38-mm2 195.19 69% 1.47 2.5.38-mm2 207.36 64% 1.56 2.5.39 190.44 70% 1.43 2.5.39 191.37 70% 1.44 2.5.39 193.60 69% 1.45
io_load:Kernel Time CPU Ratio 2.4.19 486.58 27% 3.66 2.4.19 593.72 22% 4.46 2.4.19 637.61 21% 4.79 2.5.38-mm2 232.35 61% 1.75 2.5.38-mm2 237.83 57% 1.79 2.5.38-mm2 274.39 50% 2.06 2.5.39 242.98 57% 1.83 2.5.39 294.52 50% 2.21 2.5.39 328.01 42% 2.46
mem_load:
Quoted 10 lines
Kernel Time CPU Ratio 2.4.19 172.24 78% 1.29 2.4.19 174.74 77% 1.31 2.4.19 174.87 77% 1.31 2.5.38-mm2 165.53 82% 1.24 2.5.38-mm2 170.00 80% 1.28 2.5.38-mm2 171.96 79% 1.29 2.5.39 167.92 81% 1.26 2.5.39 170.80 80% 1.28 2.5.39 172.68 79% 1.30
Quick statistical analysis:
Noload, 2.5.39 is slower than 2.4.19 and same as 2.5.38-mm2
ProcessLoad, 2.5.39 is slower than 2.4.19 and same as 2.5.38-mm2
IO Load, 2.5.39 is faster than 2.4.19 and _appears_ slower than 2.5.38-mm2 but has no statistically significant difference; This is probably a type 2 error (meaning more samples are required). Paolo if you could perform three more runs on these two kernels it would help discriminate for those in the crowd who need firm proof.
Mem Load, 2.5.39 is faster than 2.4.19 and same as 2.5.38-mm2
Note that for the results to be useful, they need to be run back to back on the same system as you seem to have done. If you use your machine between runs for something else, it can and probably will affect any further results.
Con