Quake III Arena conntracker
Subsystems (3)
Hi,
This patch (against netfilter CVS and against 2.4.20-pre8) adds a conntrack/NAT helper for Quake3 Arena Master server connections.
Brad Chapman showed some interest and has been running a version with NAT support for at least a month now (see mail below).
Feel free to include it in p-o-m.
Brad, thanks for sparking my interest in this again, and for volunteering to test it out on your network.
Regards,
Filip
From: Brad Chapman <[email protected]>
To: Filip Sneppe (Cronos) <[email protected]>
Subject: RE: [PATCH] Quake III Arena conntracker
Date: 29 Sep 2002 16:42:18 -0700
Mr. Filip,
Quoted 5 lines · --- "Filip Sneppe (Cronos)
Quoted 2 lines · Brad Chapman
It does. ATM the only thing tested is the Quake3 helper, and not with a fully
closed
Quoted 1 line
rulset (I'm allowing 27950 and 27960 in TCP/UDP already). However, so far
Quoted 8 lines
nothing
Quoted 1 line
seems to be crashing or Oopsing.
Hi Brad,
Have you had any issues with the quake3 conntrack/nat patch I sent you ? If not, I guess it wouldn't harm to have it in patch-o-matic so more people can test it.
No. I've had no issues whatsoever. The patch works great and even appears to work for Quake2 traffic as well. It belongs in p-o-m; maybe once it's put there I'll try it to see if it acts any differently.
Quoted 5 lines
Thanks for your testing,
Filip
Brad
=====
Brad Chapman
Permanent e-mail: [email protected]
__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com
Documentation/Configure.help +10 -0
@@ -2499,6 +2499,16 @@ If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. If unsure, say `Y'. +Quake III Arena protocol support +CONFIG_IP_NF_QUAKE3 + Quake III Arena connection tracking helper. This module allows for a + stricter firewall rulebase if one only allows traffic to a master + server. Connections to Quake III server IP addresses and ports returned + by the master server will be tracked automatically. + + If you want to compile it as a module, say M here and read + Documentation/modules.txt. If unsure, say `Y'. + User space queueing via NETLINK CONFIG_IP_NF_QUEUE Netfilter has the ability to queue packets to user space: the
include/linux/netfilter_ipv4/ip_conntrack_quake3.h +21 -0
@@ -0,0 +1,21 @@ +#ifndef _IP_CT_QUAKE3 +#define _IP_CT_QUAKE3 + +/* Don't confuse with 27960, often used as the Server Port */ +#define QUAKE3_MASTER_PORT 27950 + +struct quake3_search { +const char marker[4 ];/* always 0xff 0xff 0xff 0xff ? */ +const char *pattern; +size_t plen; +}; + +/* This structure is per expected connection */ +struct ip_ct_quake3_expect { +}; + +/* This structure exists only once per master */ +struct ip_ct_quake3_master { +}; + +#endif /* _IP_CT_QUAKE3 */
net/ipv4/netfilter/Config.in +8 -0
@@ -8,6 +8,7 @@ if [ "$CONFIG_IP_NF_CONNTRACK" != "n" ]; then dep_tristate ' FTP protocol support' CONFIG_IP_NF_FTP $CONFIG_IP_NF_CONNTRACK dep_tristate ' IRC protocol support' CONFIG_IP_NF_IRC $CONFIG_IP_NF_CONNTRACK + dep_tristate ' Quake III protocol support' CONFIG_IP_NF_QUAKE3 $CONFIG_IP_NF_CONNTRACK fi if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
@@ -60,6 +61,13 @@ if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then dep_tristate ' Basic SNMP-ALG support (EXPERIMENTAL)' CONFIG_IP_NF_NAT_SNMP_BASIC $CONFIG_IP_NF_NAT fi + if [ "$CONFIG_IP_NF_QUAKE3" = "m" ]; then + define_tristate CONFIG_IP_NF_NAT_QUAKE3 m + else + if [ "$CONFIG_IP_NF_QUAKE3" = "y" ]; then + define_tristate CONFIG_IP_NF_NAT_QUAKE3 $CONFIG_IP_NF_NAT + fi + fi if [ "$CONFIG_IP_NF_IRC" = "m" ]; then define_tristate CONFIG_IP_NF_NAT_IRC m else
net/ipv4/netfilter/Makefile +6 -0
@@ -42,9 +42,15 @@ export-objs += ip_conntrack_irc.o endif +obj-$(CONFIG_IP_NF_QUAKE3) += ip_conntrack_quake3.o +ifdef CONFIG_IP_NF_NAT_QUAKE3 + export-objs += ip_conntrack_quake3.o +endif + # NAT helpers obj-$(CONFIG_IP_NF_NAT_FTP) += ip_nat_ftp.o obj-$(CONFIG_IP_NF_NAT_IRC) += ip_nat_irc.o +obj-$(CONFIG_IP_NF_NAT_QUAKE3) += ip_nat_quake3.o # generic IP tables obj-$(CONFIG_IP_NF_IPTABLES) += ip_tables.o
net/ipv4/netfilter/ip_conntrack_quake3.c +156 -0
156 lines not on this page · raw message
net/ipv4/netfilter/ip_nat_quake3.c +249 -0
249 lines not on this page · raw message
patch-o-matic/extra/quake3-conntrack.patch +438 -0
438 lines not on this page · raw message
patch-o-matic/extra/quake3-conntrack.patch.config.in +2 -0
@@ -0,0 +1,2 @@ + dep_tristate ' IRC protocol support' CONFIG_IP_NF_IRC $CONFIG_IP_NF_CONNTRACK + dep_tristate ' Quake III protocol support' CONFIG_IP_NF_QUAKE3 $CONFIG_IP_NF_CONNTRACK
patch-o-matic/extra/quake3-conntrack.patch.config.in-2 +8 -0
@@ -0,0 +1,8 @@ + define_tristate CONFIG_IP_NF_NAT_IRC $CONFIG_IP_NF_NAT + fi + fi + if [ "$CONFIG_IP_NF_QUAKE3" = "m" ]; then + define_tristate CONFIG_IP_NF_NAT_QUAKE3 m + else + if [ "$CONFIG_IP_NF_QUAKE3" = "y" ]; then + define_tristate CONFIG_IP_NF_NAT_QUAKE3 $CONFIG_IP_NF_NAT
patch-o-matic/extra/quake3-conntrack.patch.configure.help +10 -0
@@ -0,0 +1,10 @@ +CONFIG_IP_NF_IRC +Quake III Arena protocol support +CONFIG_IP_NF_QUAKE3 + Quake III Arena connection tracking helper. This module allows for a + stricter firewall rulebase if one only allows traffic to a master + server. Connections to Quake III server IP addresses and ports returned + by the master server will be tracked automatically. + + If you want to compile it as a module, say M here and read + <file:Documentation/modules.txt>. If unsure, say `Y'.
patch-o-matic/extra/quake3-conntrack.patch.help +17 -0
@@ -0,0 +1,17 @@ +Author: Filip Sneppe <[email protected]> +Status: WorksForMe (tm) + +This adds CONFIG_IP_NF_QUAKE3: a Quake III Arena support module for +netfilter connection tracking/NAT. + +Quake III Arena Internet multiplayer works by querying an Internet +master server on UDP port 27950 for specific Quake III servers. The +master server responds with the IP addresses and UDP ports of +registered game servers. Those UDP ports can be randomly chosen +(although 27960 is often used). + +This connection tracking module will listen for UDP replies +from a master server, and will add the necessary expectations +for connections from client to game servers. + +Note: Requires newnat !
patch-o-matic/extra/quake3-conntrack.patch.makefile +5 -0
@@ -0,0 +1,5 @@ +# connection tracking helpers +obj-$(CONFIG_IP_NF_QUAKE3) += ip_conntrack_quake3.o +ifdef CONFIG_IP_NF_NAT_QUAKE3 + export-objs += ip_conntrack_quake3.o +endif
patch-o-matic/extra/quake3-conntrack.patch.makefile-2 +2 -0
@@ -0,0 +1,2 @@ +obj-$(CONFIG_IP_NF_NAT_IRC) += ip_nat_irc.o +obj-$(CONFIG_IP_NF_NAT_QUAKE3) += ip_nat_quake3.o