Pktgen for 2.5.44

diff -Naur -X /root/dontdiff linux-2.5.44-ori/Documentation/networking/pktgen.txt linux-2.5.44/Documentation/networking/pktgen.txt
@@ -0,0 +1,77 @@
+How to use the Linux packet generator module.
+
+1. Enable CONFIG_NET_PKTGEN to compile and build pktgen.o, install it
+   in the place where insmod may find it.
+2. Cut script "ipg" (see below).
+3. Edit script to set preferred device and destination IP address.
+3a.  Create more scripts for different interfaces.  Up to thirty-two
+     pktgen processes can be configured and run at once by using the
+     32 /proc/net/pktgen/pg* files.
+4. Run in shell: ". ipg"
+5. After this two commands are defined:
+   A. "pg" to start generator and to get results.
+   B. "pgset" to change generator parameters. F.e.
+      pgset "clone_skb 100"   sets the number of coppies of the same packet 
+                              will be sent before a new packet is allocated
+      pgset "clone_skb 0"     use multiple SKBs for packet generation
+      pgset "pkt_size 9014"   sets packet size to 9014
+      pgset "frags 5"         packet will consist of 5 fragments
+      pgset "count 200000"    sets number of packets to send, set to zero
+                              for continious sends untill explicitly
+                              stopped.
+      pgset "ipg 5000"        sets artificial gap inserted between packets
+                              to 5000 nanoseconds
+      pgset "dst 10.0.0.1"    sets IP destination address
+                              (BEWARE! This generator is very aggressive!)
+      pgset "dst_min 10.0.0.1"            Same as dst
+      pgset "dst_max 10.0.0.254"          Set the maximum destination IP.
+      pgset "src_min 10.0.0.1"            Set the minimum (or only) source IP.
+      pgset "src_max 10.0.0.254"          Set the maximum source IP.
+      pgset "dstmac 00:00:00:00:00:00"    sets MAC destination address
+      pgset "srcmac 00:00:00:00:00:00"    sets MAC source address
+      pgset "src_mac_count 1" Sets the number of MACs we'll range through.  The
+                              'minimum' MAC is what you set with srcmac.
+      pgset "dst_mac_count 1" Sets the number of MACs we'll range through.  The
+                              'minimum' MAC is what you set with dstmac.
+      pgset "flag [name]"     Set a flag to determine behaviour.  Current flags
+                              are: IPSRC_RND #IP Source is random (between min/max),
+                                   IPDST_RND, UDPSRC_RND,
+                                   UDPDST_RND, MACSRC_RND, MACDST_RND 
+      pgset "udp_src_min 9"   set UDP source port min, If < udp_src_max, then
+                              cycle through the port range.
+      pgset "udp_src_max 9"   set UDP source port max.
+      pgset "udp_dst_min 9"   set UDP destination port min, If < udp_dst_max, then
+                              cycle through the port range.
+      pgset "udp_dst_max 9"   set UDP destination port max.
+      pgset stop    	      aborts injection
+      
+  Also, ^C aborts generator.
+
+---- cut here
+
+#! /bin/sh
+
+modprobe pktgen
+
+PGDEV=/proc/net/pktgen/pg0
+
+function pgset() {
+    local result
+
+    echo $1 > $PGDEV
+
+    result=`cat $PGDEV | fgrep "Result: OK:"`
+    if [ "$result" = "" ]; then
+         cat $PGDEV | fgrep Result:
+    fi
+}
+
+function pg() {
+    echo inject > $PGDEV
+    cat $PGDEV
+}
+
+pgset "odev eth0"
+pgset "dst 0.0.0.0"
+
+---- cut here

diff -Naur -X /root/dontdiff linux-2.5.44-ori/arch/i386/defconfig linux-2.5.44/arch/i386/defconfig
@@ -443,6 +443,11 @@
 # CONFIG_NET_SCHED is not set
 
 #
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+
+#
 # Network device support
 #
 CONFIG_NETDEVICES=y

diff -Naur -X /root/dontdiff linux-2.5.44-ori/net/Config.help linux-2.5.44/net/Config.help
@@ -512,3 +512,18 @@
   performance will be written to /proc/net/profile. If you don't know
   what it is about, you don't need it: say N.
 
+CONFIG_NET_PKTGEN
+  This module will inject preconfigured packets, at a configurable
+  rate, out of a given interface.  It is used for network interface
+  stress testing and performance analysis.  If you don't understand
+  what was just said, you don't need it: say N.
+
+  Documentation on how to use the packet generator can be found
+  at <file:Documentation/networking/pktgen.txt>.
+
+  This code is also available as a module called pktgen.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want).  If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+

diff -Naur -X /root/dontdiff linux-2.5.44-ori/net/Config.in linux-2.5.44/net/Config.in
@@ -93,4 +93,10 @@
 #bool 'Network code profiler' CONFIG_NET_PROFILE
 endmenu
 
+mainmenu_option next_comment
+comment 'Network testing'
+tristate 'Packet Generator (USE WITH CAUTION)' CONFIG_NET_PKTGEN
+endmenu
+
+
 endmenu

diff -Naur -X /root/dontdiff linux-2.5.44-ori/net/core/Makefile linux-2.5.44/net/core/Makefile
@@ -17,6 +17,7 @@
 obj-$(CONFIG_NETFILTER) += netfilter.o
 obj-$(CONFIG_NET_DIVERT) += dv.o
 obj-$(CONFIG_NET_PROFILE) += profile.o
+obj-$(CONFIG_NET_PKTGEN) += pktgen.o
 obj-$(CONFIG_NET_RADIO) += wireless.o
 # Ugly. I wish all wireless drivers were moved in drivers/net/wireless
 obj-$(CONFIG_NET_PCMCIA_RADIO) += wireless.o