Panic on startup with e1000, PPC64

DISCUSSION David C. Hansen 1 participant 1 message Nov 5, 2002

Share & tools

David C. Hansen

author

2002-11-05 23:07 UTC #0 lore raw

I just put a pair of e1000's in my 4-way PPC64 box and booted a known-good kernel. It oopsed on boot. I'm going to try 2.5 next.

Linux version 2.4.20-pre4 (anton@superego) (gcc version 3.2.1 20021007 (prerelease)) #48 SMP Tue Oct 29 18:14:24 EST 2002
...
Intel(R) PRO/1000 Network Driver - version 4.3.2-k1 Copyright (c) 1999-2002 Intel Corporation.

PCI: Enabling device 40:0b.0 (0140 -> 0143)
eth0: Intel(R) PRO/1000 Network Connection
NIP:  C0000000001D5358 
MSR:  a000000000009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c00000003ff38000[1] swapper Last syscall: 120 
last math 0000000000000000 
GPR00: 0000000000000000 C00000003FF3B8F0 
       C00000000053A000 C00000003FEC3C58 
GPR04: 0000000002205800 0000000000000000 
       0000000000000000 0000000000000000 
GPR08: 0000000000000003 E000000000103000 
       E000000002248000 E000000002308800 
GPR12: C0000000005C5728 C00000003FF38000
       0000000000000000 0000000000000000 
GPR16: 0000000000000000 0000000000000000
       0000000000000000 0000000000000000 
GPR20: 0000000000000000 0000000000220000
       0000000000000001 C0000000004DC5E0 
GPR24: 0000000000000001 C00000003FF22000
       C00000003FEC3A60 0000000006EC0269 
GPR28: C00000003FEC3C58 0000000002205804
       C000000000423698 C00000003FEC3C58 
cpu 1: Vector: 300 (Data Access) at  [c00000003ff3b670]
    pc: c0000000001d5358 (e1000_io_write+0x50)

msr: a000000000009032
Warning (Oops_read): Code line not seen, dumping what data is available

Quoted 9 lines

Quoted 9 lines
GPR1; c00000003ff3b8f0 <END_OF_CODE+3f9128f0/????> GPR4; 02205800 Before first symbol
GPR9; e000000000103000 <END_OF_CODE+1fffffffffada000/????> GPR12; c0000000005c5728 <running_timer+0/8> GPR13; c00000003ff38000 <END_OF_CODE+3f90f000/????> GPR21; 00220000 Before first symbol
GPR25; c00000003ff22000 <END_OF_CODE+3f8f9000/????> GPR28; c00000003fec3c58 <END_OF_CODE+3f89ac58/????> GPR29; 02205804 Before first symbol

Call backtrace:
C00000003FE7D110 Unknown
C0000000001D6890 e1000_reset_hw+0x544
C0000000001D0600 e1000_reset+0x60
C0000000004C1E34 Unknown
C00000000025BC28 pci_announce_device+0x68
C00000000025BD58 pci_register_driver+0xb0
C0000000004C1974 Unknown
C0000000004AFA44 Unknown
C00000000000C420 init+0x6c
C000000000019514 Unknown

Kernel panic: kernel access of bad area pc c0000000001d5358 lr

c0000000001df4f0 address E000000002308800 tsk swapper/1 Using defaults from ksymoops -t elf32-powerpc -a powerpc:common Warning (Oops_read): Code line not seen, dumping what data is available

Trace; c00000003fe7d110 <END_OF_CODE+3f854110/????> Trace; c0000000001d6890 <.e1000_reset_hw+544/5b8> Trace; 000e1000 Before first symbol
Trace; c0000000001d0600 <.e1000_reset+60/11c> Trace; 000e1000 Before first symbol
Trace; c0000000004c1e34 <.e1000_probe+438/530> Trace; c00000000025bc28 <.pci_announce_device+68/e8> Trace; c00000000025bd58 <.pci_register_driver+b0/e8> Trace; c0000000004c1974 <.e1000_init_module+54/dc> Trace; c0000000004afa44 <.do_initcalls+3c/8c> Trace; c00000000000c420 <.init+6c/238> Trace; c000000000019514 <.kernel_thread+3c/48>

Quoted 1 line

Quoted 1 line
NIP; c0000000001d5358 <.e1000_io_write+50/80> <=====

Signature · 2 lines

Dave Hansen
[email protected]