Skip to contentSkip to conversation

RME HDSP9652

DISCUSSION Justin Cormack 4 participants 6 messages Nov 28, 2002 – Nov 29, 2002 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 9 lines · Paul Davis
Quoted 8 lines

I have just got a couple of the new RME Hammerfall HDSP9652 cards, and find that they are not supported by the snd-hdsp driver yet. The card is basically the same hardware as the other hdsp cards but with the io integrated on the card.

I would guess that it will need a different firmware and another type in HDSP_Type, plus the channel info. Does anyone know how to get the formware from RME (who to contact)?

Quoted 6 lines

all i need is the PCI ID from you. i've already spoken to RME about the card, and the claim is that it will with the existing h-dsp driver. the only thing that won't work are the RMS meters. the existing driver, however, doesn't recognize the PCI ID and so it doesn't work.

Its the same PCI ID, but insmod segfaults...

[root@marlin root]# lspci -v -s 04:02.0 -n
04:02.0 Class 0401: 10ee:3fc5 (rev 64)
Flags: bus master, medium devsel, latency 64, IRQ 19 Memory at e8300000 (32-bit, non-prefetchable) [size=64K]

[root@marlin root]# lspci -v -s 04:02.0
04:02.0 Multimedia audio controller: Xilinx, Inc. RME Hammerfall DSP (rev 64)
Flags: bus master, medium devsel, latency 64, IRQ 19 Memory at e8300000 (32-bit, non-prefetchable) [size=64K]

ksymoops output:

ksymoops 2.4.5 on i686 2.4.20-rc4. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.20-rc4/ (default)
-m /boot/System.map-2.4.20-rc4 (default)

Warning: You did not tell me where to find symbol information. I will assume that the log matches the kernel and modules that are running right now and I'll use the default options above for symbol resolution. If the current kernel and/or modules do not match the log, you can get more accurate output by telling me the kernel version and where to find map, modules, ksyms etc. ksymoops -h explains the options.

Unable to handle kernel NULL pointer dereference at virtual address
00000040
f8a0643d
*pde = 00000000
Oops: 0002
CPU:    2
EIP:    0010:[<f8a0643d>]    Not tainted

Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010246
eax: 00000000 ebx: f48781a8 ecx: c19ad080 edx: 00000000
esi: ffffffed edi: c19ce400 ebp: f48781a8 esp: f4a33e94
ds: 0018 es: 0018 ss: 0018
Process modprobe (pid: 782, stackpage=f4a33000)

Stack: ffffffed c19ce400 f4878000 f8975c7a f48781a8 00000002 c19ce400
f4878000
       f8a065fe f4878000 f48781a8 00000000 000010e8 400676b0 f8a38620
f8a38b20
       c19ce400 00000000 c01efc05 c19ce400 f8a38620 c19ce400 f8a38b20
00000000
Call Trace:    [<f8975c7a>] [<f8a065fe>] [<f8a38620>] [<f8a38b20>]

[<c01efc05>]
[<f8a38620>] [<f8a38b20>] [<c01efcac>] [<f8a38b20>] [<f8a06653>]
[<f8a38b20>]
[<c011e004>] [<f8a02060>] [<f8a07604>] [<f8a02060>] [<c010774f>]

Code: 89 50 40 8b 83 c4 00 00 00 85 c0 78 0c 89 04 24 89 5c 24 04
Quoted 8 lines
Quoted 8 lines

EIP; f8a0643d <[snd-hdsp]snd_hdsp_free+1d/90> <=====

ebx; f48781a8 <_end+34516cf0/384aaba8>
ecx; c19ad080 <_end+164bbc8/384aaba8>
esi; ffffffed <END_OF_CODE+75c74a2/????>
edi; c19ce400 <_end+166cf48/384aaba8>
ebp; f48781a8 <_end+34516cf0/384aaba8>
esp; f4a33e94 <_end+346d29dc/384aaba8>

Trace; f8975c7a <[snd]snd_card_free+12a/1d0> Trace; f8a065fe <[snd-hdsp]snd_hdsp_probe+12e/140> Trace; f8a38620 <[snd-hdsp]snd_hdsp_ids+0/38> Trace; f8a38b20 <[snd-hdsp]driver+0/27> Trace; c01efc05 <pci_announce_device+35/80> Trace; f8a38620 <[snd-hdsp]snd_hdsp_ids+0/38> Trace; f8a38b20 <[snd-hdsp]driver+0/27> Trace; c01efcac <pci_register_driver+5c/60> Trace; f8a38b20 <[snd-hdsp]driver+0/27> Trace; f8a06653 <[snd-hdsp]alsa_card_hdsp_init+13/60> Trace; f8a38b20 <[snd-hdsp]driver+0/27> Trace; c011e004 <sys_init_module+4f4/660> Trace; f8a02060 <[snd-hdsp]hdsp_hw_pointer+0/40> Trace; f8a07604 <[snd-hdsp]__module_license+9d1/1dcd> Trace; f8a02060 <[snd-hdsp]hdsp_hw_pointer+0/40> Trace; c010774f <system_call+33/38>

Code; f8a0643d <[snd-hdsp]snd_hdsp_free+1d/90>
00000000 <_EIP>:
Code; f8a0643d <[snd-hdsp]snd_hdsp_free+1d/90> <=====
0: 89 50 40 mov %edx,0x40(%eax) <=====
Code; f8a06440 <[snd-hdsp]snd_hdsp_free+20/90>
3: 8b 83 c4 00 00 00 mov 0xc4(%ebx),%eax
Code; f8a06446 <[snd-hdsp]snd_hdsp_free+26/90>
9: 85 c0 test %eax,%eax
Code; f8a06448 <[snd-hdsp]snd_hdsp_free+28/90>
b: 78 0c js 19 <_EIP+0x19>
Code; f8a0644a <[snd-hdsp]snd_hdsp_free+2a/90>
d: 89 04 24 mov %eax,(%esp,1)
Code; f8a0644d <[snd-hdsp]snd_hdsp_free+2d/90>
10: 89 5c 24 04 mov %ebx,0x4(%esp,1)

1 warning issued. Results may not be reliable.

-------------------------------------------------------
This SF.net email is sponsored by: Get the new Palm Tungsten T handheld. Power & Color in a compact size!
http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en

#2 lore raw
Quoted 10 lines · Justin Cormack
Quoted 9 lines · Paul Davis
Quoted 8 lines

I have just got a couple of the new RME Hammerfall HDSP9652 cards, and find that they are not supported by the snd-hdsp driver yet. The card is basically the same hardware as the other hdsp cards but with the io integrated on the card.

I would guess that it will need a different firmware and another type in HDSP_Type, plus the channel info. Does anyone know how to get the formware from RME (who to contact)?

Quoted 9 lines
Quoted 6 lines

all i need is the PCI ID from you. i've already spoken to RME about the card, and the claim is that it will with the existing h-dsp driver. the only thing that won't work are the RMS meters. the existing driver, however, doesn't recognize the PCI ID and so it doesn't work.

Its the same PCI ID, but insmod segfaults...

Maybe there is a difference in the revision number. RME had used this way to separate between Digi 96/8 PAD and Digi 96/8 PST in the past.

martin

-------------------------------------------------------
This SF.net email is sponsored by: Get the new Palm Tungsten T handheld. Power & Color in a compact size!
http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en

#3 lore raw
In reply to Justin Cormack

At 28 Nov 2002 14:39:41 +0000,

Quoted 11 lines · Justin Cormack
Quoted 9 lines · Paul Davis
Quoted 8 lines

I have just got a couple of the new RME Hammerfall HDSP9652 cards, and find that they are not supported by the snd-hdsp driver yet. The card is basically the same hardware as the other hdsp cards but with the io integrated on the card.

I would guess that it will need a different firmware and another type in HDSP_Type, plus the channel info. Does anyone know how to get the formware from RME (who to contact)?

Quoted 8 lines
Quoted 6 lines

all i need is the PCI ID from you. i've already spoken to RME about the card, and the claim is that it will with the existing h-dsp driver. the only thing that won't work are the RMS meters. the existing driver, however, doesn't recognize the PCI ID and so it doesn't work.

Its the same PCI ID, but insmod segfaults...

does the attched patch cure the segfault?
but it doesn't mean that your card will be supported by it :)

Takashi

#4 lore raw
Quoted 11 lines · Takashi Iwai
Quoted 8 lines
Quoted 6 lines

all i need is the PCI ID from you. i've already spoken to RME about the card, and the claim is that it will with the existing h-dsp driver. the only thing that won't work are the RMS meters. the existing driver, however, doesn't recognize the PCI ID and so it doesn't work.

Its the same PCI ID, but insmod segfaults...

does the attched patch cure the segfault?
but it doesn't mean that your card will be supported by it :)

Thanks, this fixes the segfault, and adding the rev 0x64 in snd_hdsp_create makes it work... It recognises the IO box as a digiface which I think is ok (3x adat + midi + 2 * spdif). Playback works, and the mixer is recognised - will test it further.

thanks for everyones help.

Justin

-------------------------------------------------------
This SF.net email is sponsored by: Get the new Palm Tungsten T handheld. Power & Color in a compact size!
http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en

#5 lore raw
Quoted 4 lines · Justin Cormack

Thanks, this fixes the segfault, and adding the rev 0x64 in snd_hdsp_create makes it work... It recognises the IO box as a digiface which I think is ok (3x adat + midi + 2 * spdif). Playback works, and the mixer is recognised - will test it further.

ok, the mixer doesnt actually appear to do anything (as hinted in Paul's email a while back). What needs to be done to support it?

Justin

-------------------------------------------------------
This SF.net email is sponsored by: Get the new Palm Tungsten T handheld. Power & Color in a compact size!
http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en

#6 lore raw
In reply to Takashi Iwai
Quoted 4 lines
Quoted 1 line

Its the same PCI ID, but insmod segfaults...

does the attched patch cure the segfault?
but it doesn't mean that your card will be supported by it :)

takashi - thanks for this patch. i didn't understand that snd_hdsp_free() could be called when no hardware was detected. now i do :)

--p

-------------------------------------------------------
This SF.net email is sponsored by: Get the new Palm Tungsten T handheld. Power & Color in a compact size!
http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en