rk3399: Sync linux v5.7-rc1 dts(i)
Subsystems (4)
v2 cover rk3399: Sync linux v5.7-rc1 dts(i)
This would help to add new boards along with new drivers like DWC3, PCIe on rk3399 platform.
So, add v5.7-rc1 linux-next dts(i) files on rk3399 platform.
Changes for v2:
- keep roc-rk3399-pc dc_12v changes to -u-boot.dtsi
Any inputs?
Jagan.
Jagan Teki (5):
arm64: dts: rk3399-puma: Move u-boot properties into -u-boot.dtsi
arm64: dts: rk3399-evb: Move u-boot properties into -u-boot.dtsi
clk: rk3399: Set empty for HCLK_SD assigned-clocks
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
arm: dts: rk3399: Sync roc-pc-mezzanine from v5.7-rc1
Suniel Mahesh (1):
rk3399: Add ROC-RK3399-PC Mezzanine board
arch/arm/dts/Makefile | 1 + arch/arm/dts/cros-ec-keyboard.dtsi | 10 +- arch/arm/dts/cros-ec-sbs.dtsi | 39 +- arch/arm/dts/rk3399-evb-u-boot.dtsi | 8 + arch/arm/dts/rk3399-evb.dts | 522 ++++++++---- arch/arm/dts/rk3399-ficus.dts | 6 + arch/arm/dts/rk3399-firefly.dts | 251 ++++-- arch/arm/dts/rk3399-gru-bob.dts | 16 +- arch/arm/dts/rk3399-gru-chromebook.dtsi | 40 +- arch/arm/dts/rk3399-gru-kevin.dts | 34 +- arch/arm/dts/rk3399-gru.dtsi | 90 +- arch/arm/dts/rk3399-khadas-edge.dtsi | 3 + arch/arm/dts/rk3399-leez-p710.dts | 36 +- arch/arm/dts/rk3399-nanopc-t4.dts | 47 +- arch/arm/dts/rk3399-nanopi4.dtsi | 66 +- arch/arm/dts/rk3399-orangepi.dts | 79 +- arch/arm/dts/rk3399-puma-u-boot.dtsi | 31 +- arch/arm/dts/rk3399-puma.dtsi | 578 +++++-------- .../dts/rk3399-roc-pc-mezzanine-u-boot.dtsi | 6 + arch/arm/dts/rk3399-roc-pc-mezzanine.dts | 93 ++ arch/arm/dts/rk3399-roc-pc-u-boot.dtsi | 36 + arch/arm/dts/rk3399-roc-pc.dts | 3 +- arch/arm/dts/rk3399-roc-pc.dtsi | 35 +- arch/arm/dts/rk3399-rock-pi-4.dts | 129 +++ arch/arm/dts/rk3399-rock960.dts | 49 ++ arch/arm/dts/rk3399-rock960.dtsi | 13 +- arch/arm/dts/rk3399-rockpro64.dts | 751 +---------------- arch/arm/dts/rk3399-rockpro64.dtsi | 797 ++++++++++++++++++ arch/arm/dts/rk3399-u-boot.dtsi | 1 + arch/arm/dts/rk3399.dtsi | 583 ++++++++----- board/firefly/roc-pc-rk3399/MAINTAINERS | 2 + configs/roc-pc-mezzanine-rk3399_defconfig | 67 ++ drivers/clk/rockchip/clk_rk3399.c | 1 + 33 files changed, 2763 insertions(+), 1660 deletions(-) create mode 100644 arch/arm/dts/rk3399-roc-pc-mezzanine-u-boot.dtsi create mode 100644 arch/arm/dts/rk3399-roc-pc-mezzanine.dts create mode 100644 arch/arm/dts/rk3399-rockpro64.dtsi create mode 100644 configs/roc-pc-mezzanine-rk3399_defconfig
Signature · 1 line
2.17.1
A message that is not in the archive (sent off-list or not yet received): 20200428100019.19155-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org
PATCH v2 1/6 arm64: dts: rk3399-puma: Move u-boot properties into -u-boot.dtsi
Move U-Boot specific properties into rk3399-puma u-boot specific dtsi file.
This would help to sync the devicetrees from Linux whenever required instead of adding specific nodes.
---
Changes for v2:
- none
arch/arm/dts/rk3399-puma-u-boot.dtsi | 16 ++++++++++++++++ arch/arm/dts/rk3399-puma.dtsi | 11 ----------- 2 files changed, 16 insertions(+), 11 deletions(-)
arch/arm/dts/rk3399-puma-u-boot.dtsi +16 -0
@@ -22,3 +22,19 @@ }; }; + +&bios_enable { + u-boot,dm-pre-reloc; +}; + +&gpio1 { + u-boot,dm-pre-reloc; +}; + +&gpio3 { + u-boot,dm-pre-reloc; +}; + +&spiflash { + u-boot,dm-pre-reloc; +};
arch/arm/dts/rk3399-puma.dtsi +0 -11
@@ -91,7 +91,6 @@ */ bios_enable: bios_enable { compatible = "regulator-fixed"; - u-boot,dm-pre-reloc; regulator-name = "bios_enable"; enable-active-high; gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
@@ -520,14 +519,6 @@ status = "okay"; }; -&gpio1 { - u-boot,dm-pre-reloc; -}; - -&gpio3 { - u-boot,dm-pre-reloc; -}; - &pinctrl { /* Pins that are not explicitely used by any devices */ pinctrl-names = "default";
@@ -633,8 +624,6 @@ #size-cells = <0>; spiflash: w25q32dw@0 { - u-boot,dm-pre-reloc; - compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <49500000>;
Signature · 1 line
2.17.1
Re: [PATCH v2 1/6] arm64: dts: rk3399-puma: Move u-boot properties into -u-boot.dtsi
Quoted 8 lines · Jagan Teki
Move U-Boot specific properties into rk3399-puma u-boot specific dtsi file.
This would help to sync the devicetrees from Linux whenever required instead of adding specific nodes.
Cc Peter Robinson <[email protected]>Signed-off-by Jagan Teki <[email protected]>
Thanks,
- Kever
Quoted 68 lines
---
Changes for v2:
- nonearch/arm/dts/rk3399-puma-u-boot.dtsi | 16 ++++++++++++++++ arch/arm/dts/rk3399-puma.dtsi | 11 ----------- 2 files changed, 16 insertions(+), 11 deletions(-)arch/arm/dts/rk3399-puma-u-boot.dtsi +16
-0@@ -22,3 +22,19 @@ }; }; + +&bios_enable { + u-boot,dm-pre-reloc; +}; + +&gpio1 { + u-boot,dm-pre-reloc; +}; + +&gpio3 { + u-boot,dm-pre-reloc; +}; + +&spiflash { + u-boot,dm-pre-reloc; +};arch/arm/dts/rk3399-puma.dtsi +0
-11@@ -91,7 +91,6 @@ */ bios_enable: bios_enable { compatible = "regulator-fixed"; - u-boot,dm-pre-reloc; regulator-name = "bios_enable"; enable-active-high; gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;@@ -520,14 +519,6 @@ status = "okay"; }; -&gpio1 { - u-boot,dm-pre-reloc; -}; - -&gpio3 { - u-boot,dm-pre-reloc; -}; - &pinctrl { /* Pins that are not explicitely used by any devices */ pinctrl-names = "default";@@ -633,8 +624,6 @@ #size-cells = <0>; spiflash: w25q32dw@0 { - u-boot,dm-pre-reloc; - compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <49500000>;
Re: [PATCH v2 1/6] arm64: dts: rk3399-puma: Move u-boot properties into -u-boot.dtsi【请注意,邮件由linux-rockchip-bounces+kever.yang=rock-chips.com@lists.infradead.org代发】
In reply to Jagan TekiQuoted 8 lines · Jagan Teki
Move U-Boot specific properties into rk3399-puma u-boot specific dtsi file.
This would help to sync the devicetrees from Linux whenever required instead of adding specific nodes.
Cc Peter Robinson <[email protected]>Signed-off-by Jagan Teki <[email protected]>
Thanks,
- Kever
Quoted 68 lines
---
Changes for v2:
- nonearch/arm/dts/rk3399-puma-u-boot.dtsi | 16 ++++++++++++++++ arch/arm/dts/rk3399-puma.dtsi | 11 ----------- 2 files changed, 16 insertions(+), 11 deletions(-)arch/arm/dts/rk3399-puma-u-boot.dtsi +16
-0@@ -22,3 +22,19 @@ }; }; + +&bios_enable { + u-boot,dm-pre-reloc; +}; + +&gpio1 { + u-boot,dm-pre-reloc; +}; + +&gpio3 { + u-boot,dm-pre-reloc; +}; + +&spiflash { + u-boot,dm-pre-reloc; +};arch/arm/dts/rk3399-puma.dtsi +0
-11@@ -91,7 +91,6 @@ */ bios_enable: bios_enable { compatible = "regulator-fixed"; - u-boot,dm-pre-reloc; regulator-name = "bios_enable"; enable-active-high; gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;@@ -520,14 +519,6 @@ status = "okay"; }; -&gpio1 { - u-boot,dm-pre-reloc; -}; - -&gpio3 { - u-boot,dm-pre-reloc; -}; - &pinctrl { /* Pins that are not explicitely used by any devices */ pinctrl-names = "default";@@ -633,8 +624,6 @@ #size-cells = <0>; spiflash: w25q32dw@0 { - u-boot,dm-pre-reloc; - compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <49500000>;
PATCH v2 2/6 arm64: dts: rk3399-evb: Move u-boot properties into -u-boot.dtsi
In reply to a message not in the archiveMove U-Boot specific properties into rk3399-evb u-boot specific dtsi file.
This would help to sync the devicetrees from Linux whenever required instead of adding specific nodes.
---
Changes for v2:
- none
arch/arm/dts/rk3399-evb-u-boot.dtsi | 8 ++++++++ arch/arm/dts/rk3399-evb.dts | 2 -- 2 files changed, 8 insertions(+), 2 deletions(-)
arch/arm/dts/rk3399-evb-u-boot.dtsi +8 -0
@@ -11,3 +11,11 @@ u-boot,spl-boot-order = &sdhci, &sdmmc; }; }; + +&i2c0 { + u-boot,dm-pre-reloc; +}; + +&rk808 { + u-boot,dm-pre-reloc; +};
arch/arm/dts/rk3399-evb.dts +0 -2
@@ -199,7 +199,6 @@ clock-frequency = <400000>; i2c-scl-falling-time-ns = <50>; i2c-scl-rising-time-ns = <100>; - u-boot,dm-pre-reloc; rk808: pmic@1b { compatible = "rockchip,rk808";
@@ -211,7 +210,6 @@ reg = <0x1b>; rockchip,system-power-controller; #clock-cells = <1>; - u-boot,dm-pre-reloc; status = "okay"; vcc12-supply = <&vcc3v3_sys>;
Signature · 1 line
2.17.1
A message that is not in the archive (sent off-list or not yet received): 20200428100019.19155-3-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org
Kever Yang
Reviewed-byRe: [PATCH v2 2/6] arm64: dts: rk3399-evb: Move u-boot properties into -u-boot.dtsi
Quoted 7 lines · Jagan Teki
Move U-Boot specific properties into rk3399-evb u-boot specific dtsi file.
This would help to sync the devicetrees from Linux whenever required instead of adding specific nodes.
Signed-off-by Jagan Teki <[email protected]>
Thanks,
- Kever
Quoted 37 lines
---
Changes for v2:
- nonearch/arm/dts/rk3399-evb-u-boot.dtsi | 8 ++++++++ arch/arm/dts/rk3399-evb.dts | 2 -- 2 files changed, 8 insertions(+), 2 deletions(-)arch/arm/dts/rk3399-evb-u-boot.dtsi +8
-0@@ -11,3 +11,11 @@ u-boot,spl-boot-order = &sdhci, &sdmmc; }; }; + +&i2c0 { + u-boot,dm-pre-reloc; +}; + +&rk808 { + u-boot,dm-pre-reloc; +};arch/arm/dts/rk3399-evb.dts +0
-1@@ -199,7 +199,6 @@ clock-frequency = <400000>; i2c-scl-falling-time-ns = <50>; i2c-scl-rising-time-ns = <100>; - u-boot,dm-pre-reloc; rk808: pmic@1b { compatible = "rockchip,rk808";
arch/arm/dts/rk3399-evb.dts line 215
Quoted 7 lines
arch/arm/dts/rk3399-evb.dts +0
-1@@ -211,7 +210,6 @@ reg = <0x1b>; rockchip,system-power-controller; #clock-cells = <1>; - u-boot,dm-pre-reloc; status = "okay"; vcc12-supply = <&vcc3v3_sys>;
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
PATCH v2 3/6 clk: rk3399: Set empty for HCLK_SD assigned-clocks
In reply to a message not in the archiveDue to v5.7-rc1 sync the SD controller nodes in rk3399.dtsi have HCLK_SD assigned-clocks which are usually required for Linux and don't require to handle them in U-Boot.
assigned-clocks = <&cru HCLK_SD>;
So, mark them as empty in clock otherwise device probe on those SD controllers would fail.
---
Changes for v2:
- none
drivers/clk/rockchip/clk_rk3399.c | 1 + 1 file changed, 1 insertion(+)
drivers/clk/rockchip/clk_rk3399.c +1 -0
@@ -996,6 +996,7 @@ static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate)break ;case ACLK_VOP1 :case HCLK_VOP1 : +case HCLK_SD :/** * assigned-clocks handling won't require for vopl, so * return 0 to satisfy clk_set_defaults during device probe.
Signature · 1 line
2.17.1
A message that is not in the archive (sent off-list or not yet received): 20200428100019.19155-4-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org
Kever Yang
Reviewed-byRe: [PATCH v2 3/6] clk: rk3399: Set empty for HCLK_SD assigned-clocks
Quoted 10 lines · Jagan Teki
Due to v5.7-rc1 sync the SD controller nodes in
rk3399.dtsihaveHCLK_SDassigned-clocks which are usually required for Linux and don't require to handle them in U-Boot.assigned-clocks = <&cru HCLK_SD>;So, mark them as empty in clock otherwise device probe on those SD controllers would fail.
Signed-off-by Jagan Teki <[email protected]>
Thanks,
- Kever
Quoted 12 lines
---
Changes for v2:
- nonedrivers/clk/rockchip/clk_rk3399.c | 1 + 1 file changed, 1 insertion(+)drivers/clk/rockchip/clk_rk3399.c +0
-0
drivers/clk/rockchip/clk_rk3399.c static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate) · line 1002
Quoted 7 lines
drivers/clk/rockchip/clk_rk3399.c +1
-0@@ -996,6 +996,7 @@ static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate)break ;case ACLK_VOP1 :case HCLK_VOP1 : +case HCLK_SD :/** * assigned-clocks handling won't require for vopl, so * return 0 to satisfy clk_set_defaults during device probe.
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
PATCH v2 4/6 arm64: dts: rk3399: Sync v5.7-rc1 from Linux
In reply to a message not in the archiveSync rk3399 dts(i) files from v5.7-rc1 linux-next.
Reason:
To get updated PCIe nodes and properties on respective dts(i) files.
Summary:
- sync won't include new board dts(i)
- sync will add required files used on respective dts(i)
- rk3399-puma-u-boot.dtsi spiflash label changed to norflash
- move puma.dtsi bios_enable into rk3399-puma-u-boot.dtsi
- move legacy max-frequency of sdhci into rk3399-u-boot.dtsi
- update cross-ec-[keyboard|sbs].dtsi path as per U-Boot
- keep roc-rk3399-pc dc_12v changes to -u-boot.dtsi
---
Changes for v2:
- keep roc-rk3399-pc dc_12v changes to -u-boot.dtsi
arch/arm/dts/cros-ec-keyboard.dtsi | 10 +- arch/arm/dts/cros-ec-sbs.dtsi | 39 +- arch/arm/dts/rk3399-evb.dts | 520 +++++++++++----- arch/arm/dts/rk3399-ficus.dts | 6 + arch/arm/dts/rk3399-firefly.dts | 251 ++++++-- arch/arm/dts/rk3399-gru-bob.dts | 16 +- arch/arm/dts/rk3399-gru-chromebook.dtsi | 40 +- arch/arm/dts/rk3399-gru-kevin.dts | 34 +- arch/arm/dts/rk3399-gru.dtsi | 90 ++- arch/arm/dts/rk3399-khadas-edge.dtsi | 3 + arch/arm/dts/rk3399-leez-p710.dts | 36 +- arch/arm/dts/rk3399-nanopc-t4.dts | 47 +- arch/arm/dts/rk3399-nanopi4.dtsi | 66 +- arch/arm/dts/rk3399-orangepi.dts | 79 ++- arch/arm/dts/rk3399-puma-u-boot.dtsi | 25 +- arch/arm/dts/rk3399-puma.dtsi | 567 +++++++---------- arch/arm/dts/rk3399-roc-pc-u-boot.dtsi | 36 ++ arch/arm/dts/rk3399-roc-pc.dts | 3 +- arch/arm/dts/rk3399-roc-pc.dtsi | 35 +- arch/arm/dts/rk3399-rock-pi-4.dts | 129 ++++ arch/arm/dts/rk3399-rock960.dts | 49 ++ arch/arm/dts/rk3399-rock960.dtsi | 13 +- arch/arm/dts/rk3399-rockpro64.dts | 751 +--------------------- arch/arm/dts/rk3399-rockpro64.dtsi | 797 ++++++++++++++++++++++++ arch/arm/dts/rk3399-u-boot.dtsi | 1 + arch/arm/dts/rk3399.dtsi | 583 ++++++++++------- 26 files changed, 2574 insertions(+), 1652 deletions(-) create mode 100644 arch/arm/dts/rk3399-rockpro64.dtsi
arch/arm/dts/cros-ec-keyboard.dtsi +6 -4
@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Keyboard dts fragment for devices that use cros-ec-keyboard * * Copyright (c) 2014 Google, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/input/input.h>
@@ -22,6 +19,7 @@ MATRIX_KEY(0x00, 0x02, KEY_F1) MATRIX_KEY(0x00, 0x03, KEY_B) MATRIX_KEY(0x00, 0x04, KEY_F10) + MATRIX_KEY(0x00, 0x05, KEY_RO) MATRIX_KEY(0x00, 0x06, KEY_N) MATRIX_KEY(0x00, 0x08, KEY_EQUAL) MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
@@ -34,6 +32,7 @@ MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE) MATRIX_KEY(0x01, 0x09, KEY_F9) MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE) + MATRIX_KEY(0x01, 0x0c, KEY_HENKAN) MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL) MATRIX_KEY(0x02, 0x01, KEY_TAB)
@@ -45,6 +44,7 @@ MATRIX_KEY(0x02, 0x07, KEY_102ND) MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE) MATRIX_KEY(0x02, 0x09, KEY_F8) + MATRIX_KEY(0x02, 0x0a, KEY_YEN) MATRIX_KEY(0x03, 0x01, KEY_GRAVE) MATRIX_KEY(0x03, 0x02, KEY_F2)
@@ -52,7 +52,9 @@ MATRIX_KEY(0x03, 0x04, KEY_F5) MATRIX_KEY(0x03, 0x06, KEY_6) MATRIX_KEY(0x03, 0x08, KEY_MINUS) + MATRIX_KEY(0x03, 0x09, KEY_F13) MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH) + MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN) MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL) MATRIX_KEY(0x04, 0x01, KEY_A)
arch/arm/dts/cros-ec-sbs.dtsi +38 -1
@@ -1,8 +1,45 @@ -// SPDX-License-Identifier: GPL-2.0 /* * Smart battery dts fragment for devices that use cros-ec-sbs * * Copyright (c) 2015 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ &i2c_tunnel {
arch/arm/dts/rk3399-evb.dts +361 -159
604 lines not on this page · raw message
arch/arm/dts/rk3399-ficus.dts +6 -0
@@ -146,6 +146,12 @@ }; }; +&spi1 { + /* On both Low speed and High speed expansion */ + cs-gpios = <0>, <&gpio4 RK_PA6 0>, <&gpio4 RK_PA7 0>; + status = "okay"; +}; + &usbdrd_dwc3_0 { dr_mode = "host"; };
arch/arm/dts/rk3399-firefly.dts +197 -54
434 lines not on this page · raw message
arch/arm/dts/rk3399-gru-bob.dts +13 -3
@@ -18,11 +18,11 @@ "google,bob", "google,gru", "rockchip,rk3399"; edp_panel: edp-panel { - compatible = "boe,nv101wxmn51", "simple-panel"; + compatible = "boe,nv101wxmn51"; backlight = <&backlight>; power-supply = <&pp3300_disp>; - ports { + port { panel_in_edp: endpoint { remote-endpoint = <&edp_out_panel>; };
@@ -68,12 +68,22 @@ &spi0 { status = "okay"; + + cr50@0 { + compatible = "google,cr50"; + reg = <0>; + interrupt-parent = <&gpio0>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_int_od_l>; + spi-max-frequency = <800000>; + }; }; &pinctrl { tpm { h1_int_od_l: h1-int-od-l { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; };
arch/arm/dts/rk3399-gru-chromebook.dtsi +21 -19
@@ -194,20 +194,25 @@ backlight: backlight { compatible = "pwm-backlight"; - brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - 17 18 19 20 21 22 23 24 25 26 27 28 29 30 - 31 32 33 34 35 36 37 38 39 40 41 42 43 44 - 45 46 47 48 49 50 51 52 53 54 55 56 57 58 - 59 60 61 62 63 64 65 66 67 68 69 70 71 72 - 73 74 75 76 77 78 79 80 81 82 83 84 85 86 - 87 88 89 90 91 92 93 94 95 96 97 98 99 100>; - default-brightness-level = <51>; enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; power-supply = <&pp3300_disp>; pinctrl-names = "default"; pinctrl-0 = <&bl_en>; pwm-delay-us = <10000>; }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>; + + wake_on_bt: wake-on-bt { + label = "Wake-on-Bluetooth"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; }; &ppvar_bigcpu {
@@ -232,7 +237,6 @@ &edp { status = "okay"; - rockchip,panel = <&edp_panel>; ports { edp_out: port@1 { reg = <1>;
@@ -287,11 +291,9 @@ ap_i2c_tp: &i2c5 { #pwm-cells = <1>; }; - usbc_extcon1: extcon@1 { + usbc_extcon1: extcon1 { compatible = "google,extcon-usbc-cros-ec"; google,usb-port-id = <1>; - - #extcon-cells = <0>; }; };
@@ -361,27 +363,27 @@ ap_i2c_tp: &i2c5 { &pinctrl { discrete-regulators { pp1500_en: pp1500-en { - rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; pp1800_audio_en: pp1800-audio-en { - rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>; }; pp3000_en: pp3000-en { - rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; pp3300_disp_en: pp3300-disp-en { - rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO + rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; wlan_module_pd_l: wlan-module-pd-l { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; }; };
@@ -389,10 +391,10 @@ ap_i2c_tp: &i2c5 { &wifi { wifi_perst_l: wifi-perst-l { - rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; wlan_host_wake_l: wlan-host-wake-l { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; };
arch/arm/dts/rk3399-gru-kevin.dts +26 -8
@@ -39,11 +39,25 @@ }; edp_panel: edp-panel { - compatible = "sharp,lq123p1jx31", "simple-panel"; + compatible = "sharp,lq123p1jx31"; backlight = <&backlight>; power-supply = <&pp3300_disp>; - ports { + panel-timing { + clock-frequency = <266666667>; + hactive = <2400>; + hfront-porch = <48>; + hback-porch = <84>; + hsync-len = <32>; + hsync-active = <0>; + vactive = <1600>; + vfront-porch = <3>; + vback-porch = <120>; + vsync-len = <10>; + vsync-active = <0>; + }; + + port { panel_in_edp: endpoint { remote-endpoint = <&edp_out_panel>; };
@@ -118,13 +132,17 @@ map0 { trip = <&ppvar_bigcpu_alert>; cooling-device = - <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; contribution = <4096>; }; map1 { trip = <&ppvar_bigcpu_alert>; cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; contribution = <1024>; }; };
@@ -286,24 +304,24 @@ ap_i2c_dig: &i2c2 { digitizer { /* Has external pullup */ cpu1_dig_irq_l: cpu1-dig-irq-l { - rockchip,pins = <2 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; /* Has external pullup */ cpu1_dig_pdct_l: cpu1-dig-pdct-l { - rockchip,pins = <2 5 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; discrete-regulators { cpu3_pen_pwr_en: cpu3-pen-pwr-en { - rockchip,pins = <4 30 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pen { cpu1_pen_eject: cpu1-pen-eject { - rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; };
arch/arm/dts/rk3399-gru.dtsi +36 -54
239 lines not on this page · raw message
arch/arm/dts/rk3399-khadas-edge.dtsi +3 -0
@@ -654,9 +654,12 @@ sd-uhs-sdr104; vqmmc-supply = <&vcc1v8_s3>; vmmc-supply = <&vccio_sd>; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; brcmf: wifi@1 { + reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
arch/arm/dts/rk3399-leez-p710.dts +18 -18
@@ -42,14 +42,14 @@ regulator-max-microvolt = <5000000>; }; - vcc5v0_sys: vcc5v0-sys { + vcc3v3_lan: vcc3v3-lan { compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; + regulator-name = "vcc3v3_lan"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc5v_adp>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vim-supply = <&vcc3v3_sys>; }; vcc3v3_sys: vcc3v3-sys {
@@ -83,14 +83,14 @@ vin-supply = <&vcc5v0_sys>; }; - vcc3v3_lan: vcc3v3-lan { + vcc5v0_sys: vcc5v0-sys { compatible = "regulator-fixed"; - regulator-name = "vcc3v3_lan"; + regulator-name = "vcc5v0_sys"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vim-supply = <&vcc3v3_sys>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc5v_adp>; }; vdd_log: vdd-log {
@@ -510,6 +510,14 @@ }; }; +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed;
@@ -522,14 +530,6 @@ status = "okay"; }; -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - non-removable; - status = "okay"; -}; - &tcphy0 { status = "okay"; };
arch/arm/dts/rk3399-nanopc-t4.dts +46 -1
59 lines not on this page · raw message
arch/arm/dts/rk3399-nanopi4.dtsi +60 -6
113 lines not on this page · raw message
arch/arm/dts/rk3399-orangepi.dts +68 -11
174 lines not on this page · raw message
arch/arm/dts/rk3399-puma-u-boot.dtsi +19 -6
@@ -13,7 +13,7 @@ chosen { stdout-path = "serial0:115200n8"; u-boot,spl-boot-order = \ - "same-as-spl", &spiflash, &sdhci, &sdmmc; + "same-as-spl", &norflash, &sdhci, &sdmmc; }; aliases {
@@ -21,10 +21,23 @@ spi1 = &spi5; }; -}; - -&bios_enable { - u-boot,dm-pre-reloc; + /* + * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module + * eMMC and SPI flash powered-down initially (in fact it keeps the + * reset signal asserted). Even though it is an enable signal, we + * model this as a regulator. + */ + bios_enable: bios_enable { + compatible = "regulator-fixed"; + u-boot,dm-pre-reloc; + regulator-name = "bios_enable"; + enable-active-high; + gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; }; &gpio1 {
@@ -35,6 +48,6 @@ u-boot,dm-pre-reloc; }; -&spiflash { +&norflash { u-boot,dm-pre-reloc; };
arch/arm/dts/rk3399-puma.dtsi +232 -335
840 lines not on this page · raw message
arch/arm/dts/rk3399-roc-pc-u-boot.dtsi +36 -0
@@ -14,9 +14,45 @@ chosen { u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc; }; + + vcc_hub_en: vcc_hub_en-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_rst>; + regulator-name = "vcc_hub_en"; + regulator-always-on; + }; +}; + +/* + * should be placed inside mp8859, but not until mp8859 has + * its own dt-binding. + */ +&dc_12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <&vcc_vbus_typec0>; }; &vdd_log { regulator-min-microvolt = <430000>; regulator-init-microvolt = <950000>; }; + +&vcc5v0_host { + regulator-always-on; +}; + +&vcc_sys { + regulator-always-on; +}; + +&vcc_sdio { + regulator-always-on; +};
arch/arm/dts/rk3399-roc-pc.dts +1 -2
@@ -8,6 +8,5 @@ / { model = "Firefly ROC-RK3399-PC Board"; - compatible = "libretech,roc-rk3399-pc", "firefly,roc-rk3399-pc", - "rockchip,rk3399"; + compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; };
arch/arm/dts/rk3399-roc-pc.dtsi +18 -17
@@ -110,20 +110,6 @@ regulator-max-microvolt = <5000000>; }; - /* - * should be placed inside mp8859, but not until mp8859 has - * its own dt-binding. - */ - dc_12v: mp8859-dcdc1 { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <&vcc_vbus_typec0>; - }; - /* switched by pmic_sleep */ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed";
@@ -176,7 +162,6 @@ pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en &hub_rst>; regulator-name = "vcc5v0_host"; - regulator-always-on; vin-supply = <&vcc_sys>; };
@@ -198,7 +183,6 @@ pinctrl-names = "default"; pinctrl-0 = <&vcc_sys_en>; regulator-name = "vcc_sys"; - regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>;
@@ -392,7 +376,6 @@ vcc_sdio: LDO_REG4 { regulator-name = "vcc_sdio"; - regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>;
@@ -549,6 +532,24 @@ vbus-supply = <&vcc_vbus_typec0>; status = "okay"; }; + + mp8859: regulator@66 { + compatible = "mps,mp8859"; + reg = <0x66>; + dc_12v: mp8859_dcdc { + regulator-name = "dc_12v"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_vbus_typec0>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <12000000>;
Lines of this file are not shown. View the raw message.
arch/arm/dts/rk3399-rock-pi-4.dts +129 -0
129 lines not on this page · raw message
arch/arm/dts/rk3399-rock960.dts +49 -0
49 lines not on this page · raw message
arch/arm/dts/rk3399-rockpro64.dts +14 -737
751 lines not on this page · raw message
arch/arm/dts/rk3399-rockpro64.dtsi new file +797 -0
797 lines not on this page · raw message
arch/arm/dts/rk3399.dtsi +367 -216
583 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.17.1
Part of the diff is not shown here. View the raw message.
A message that is not in the archive (sent off-list or not yet received): 20200428100019.19155-5-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org
Kever Yang
Reviewed-byRe: [PATCH v2 4/6] arm64: dts: rk3399: Sync v5.7-rc1 from Linux
Quoted 15 lines · Jagan Teki
Sync rk3399 dts(i) files from v5.7-rc1 linux-next.
Reason:
To get updated PCIe nodes and properties on respective dts(i) files.Summary:
- sync won't include new board dts(i)
- sync will add required files used on respective dts(i)
-rk3399-puma-u-boot.dtsispiflash label changed to norflash
- movepuma.dtsibios_enableintork3399-puma-u-boot.dtsi
- move legacy max-frequency of sdhci intork3399-u-boot.dtsi
- update cross-ec-[keyboard|sbs].dtsi path as per U-Boot
- keep roc-rk3399-pcdc_12vchanges to-u-boot.dtsi
Quoted 1 line
Signed-off-by Jagan Teki <[email protected]>
Thanks,
- Kever
arch/arm/dts/rk3399.dtsi
Quoted 6,419 lines
---
Changes for v2:
- keep roc-rk3399-pcdc_12vchanges to-u-boot.dtsiarch/arm/dts/cros-ec-keyboard.dtsi | 10 +- arch/arm/dts/cros-ec-sbs.dtsi | 39 +- arch/arm/dts/rk3399-evb.dts | 520 +++++++++++----- arch/arm/dts/rk3399-ficus.dts | 6 + arch/arm/dts/rk3399-firefly.dts | 251 ++++++-- arch/arm/dts/rk3399-gru-bob.dts | 16 +- arch/arm/dts/rk3399-gru-chromebook.dtsi | 40 +- arch/arm/dts/rk3399-gru-kevin.dts | 34 +- arch/arm/dts/rk3399-gru.dtsi | 90 ++- arch/arm/dts/rk3399-khadas-edge.dtsi | 3 + arch/arm/dts/rk3399-leez-p710.dts | 36 +- arch/arm/dts/rk3399-nanopc-t4.dts | 47 +- arch/arm/dts/rk3399-nanopi4.dtsi | 66 +- arch/arm/dts/rk3399-orangepi.dts | 79 ++- arch/arm/dts/rk3399-puma-u-boot.dtsi | 25 +- arch/arm/dts/rk3399-puma.dtsi | 567 +++++++---------- arch/arm/dts/rk3399-roc-pc-u-boot.dtsi | 36 ++ arch/arm/dts/rk3399-roc-pc.dts | 3 +- arch/arm/dts/rk3399-roc-pc.dtsi | 35 +- arch/arm/dts/rk3399-rock-pi-4.dts | 129 ++++ arch/arm/dts/rk3399-rock960.dts | 49 ++ arch/arm/dts/rk3399-rock960.dtsi | 13 +- arch/arm/dts/rk3399-rockpro64.dts | 751 +--------------------- arch/arm/dts/rk3399-rockpro64.dtsi | 797 ++++++++++++++++++++++++ arch/arm/dts/rk3399-u-boot.dtsi | 1 + arch/arm/dts/rk3399.dtsi | 583 ++++++++++------- 26 files changed, 2574 insertions(+), 1652 deletions(-)create mode 100644
arch/arm/dts/rk3399-rockpro64.dtsiarch/arm/dts/cros-ec-keyboard.dtsi +6
-4@@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Keyboard dts fragment for devices that use cros-ec-keyboard * * Copyright (c) 2014 Google, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/input/input.h>@@ -22,6 +19,7 @@ MATRIX_KEY(0x00, 0x02, KEY_F1) MATRIX_KEY(0x00, 0x03, KEY_B) MATRIX_KEY(0x00, 0x04, KEY_F10) + MATRIX_KEY(0x00, 0x05, KEY_RO) MATRIX_KEY(0x00, 0x06, KEY_N) MATRIX_KEY(0x00, 0x08, KEY_EQUAL) MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)@@ -34,6 +32,7 @@ MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE) MATRIX_KEY(0x01, 0x09, KEY_F9) MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE) + MATRIX_KEY(0x01, 0x0c, KEY_HENKAN) MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL) MATRIX_KEY(0x02, 0x01, KEY_TAB)@@ -45,6 +44,7 @@ MATRIX_KEY(0x02, 0x07, KEY_102ND) MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE) MATRIX_KEY(0x02, 0x09, KEY_F8) + MATRIX_KEY(0x02, 0x0a, KEY_YEN) MATRIX_KEY(0x03, 0x01, KEY_GRAVE) MATRIX_KEY(0x03, 0x02, KEY_F2)@@ -52,7 +52,9 @@ MATRIX_KEY(0x03, 0x04, KEY_F5) MATRIX_KEY(0x03, 0x06, KEY_6) MATRIX_KEY(0x03, 0x08, KEY_MINUS) + MATRIX_KEY(0x03, 0x09, KEY_F13) MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH) + MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN) MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL) MATRIX_KEY(0x04, 0x01, KEY_A)arch/arm/dts/cros-ec-sbs.dtsi +38
-1@@ -1,8 +1,45 @@ -// SPDX-License-Identifier: GPL-2.0 /* * Smart battery dts fragment for devices that use cros-ec-sbs * * Copyright (c) 2015 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ &i2c_tunnel {arch/arm/dts/rk3399-evb.dts +361
-159@@ -1,86 +1,18 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * (C) Copyright 2016 Rockchip Electronics Co., Ltd + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd */ /dts-v1/; #include <dt-bindings/pwm/pwm.h> -#include <dt-bindings/pinctrl/rockchip.h> #include "rk3399.dtsi" / { model = "Rockchip RK3399 Evaluation Board"; - compatible = "rockchip,rk3399-evb", "rockchip,rk3399", - "google,rk3399evb-rev2"; - - chosen { - stdout-path = &uart2; - }; - - vdd_center: vdd-center { - compatible = "pwm-regulator"; - pwms = <&pwm3 0 25000 1>; - regulator-name = "vdd_center"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-init-microvolt = <950000>; - regulator-always-on; - regulator-boot-on; - status = "okay"; - }; - - vccsys: vccsys { - compatible = "regulator-fixed"; - regulator-name = "vccsys"; - regulator-boot-on; - regulator-always-on; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vcc_phy: vcc-phy-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_phy"; - regulator-always-on; - regulator-boot-on; - }; - - vcc5v0_host: vcc5v0-host-en { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_host"; - gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; - }; - - vcc5v0_typec0: vcc5v0-typec0-en { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_typec0"; - gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; - }; - - vcc5v0_typec1: vcc5v0-typec1-en { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_typec1"; - gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; + compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; backlight: backlight { compatible = "pwm-backlight"; - power-supply = <&vccsys>; - enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; brightness-levels = < 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15@@ -116,18 +48,98 @@ 248 249 250 251 252 253 254 255>; default-brightness-level = <200>; pwms = <&pwm0 0 25000 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pin>; - pwm-delay-us = <10000>; - status = "disabled"; }; - panel:panel { - compatible = "simple-panel"; - power-supply = <&vcc33_lcd>; + edp_panel: edp-panel { + compatible ="lg,lp079qx1-sp0v"; backlight = <&backlight>; - /*enable-gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;*/ - status = "disabled"; + enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; + power-supply = <&vcc3v3_s0>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + vdd_center: vdd-center { + compatible = "pwm-regulator"; + pwms = <&pwm3 0 25000 0>; + regulator-name = "vdd_center"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + status = "okay"; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + +}; + +&edp { + status = "okay"; + force-hpd; + + ports { + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + edp_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; }; };@@ -135,24 +147,253 @@ status = "okay"; }; -&pwm0 { +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; status = "okay"; }; -&pwm2 { +&i2c0 { status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + vcc10-supply = <&vcc3v3_sys>; + vcc11-supply = <&vcc3v3_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc1v8_pmu>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v0_tp: LDO_REG2 { + regulator-name = "vcc3v0_tp"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmu: LDO_REG3 { + regulator-name = "vcc1v8_pmu"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sd: LDO_REG4 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; }; -&pwm3 { +&pwm0 { status = "okay"; }; -&saradc { +&pwm2 { status = "okay"; }; -&sdmmc { - bus-width = <4>; +&pwm3 { status = "okay"; };@@ -164,115 +405,76 @@ status = "okay"; }; -&uart2 { - status = "okay"; +&pcie_phy { + status = "disabled"; }; -&usb_host0_ehci { - status = "okay"; +&pcie0 { + ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn_cpm>; + status = "disabled"; }; -&usb_host0_ohci { +&u2phy0 { status = "okay"; }; -&usbdrd3_0 { - vbus-supply = <&vcc5v0_typec0>; +&u2phy0_host { + phy-supply = <&vcc5v0_host>; status = "okay"; }; -&usb_host1_ehci { +&u2phy1 { status = "okay"; }; -&usb_host1_ohci { +&u2phy1_host { + phy-supply = <&vcc5v0_host>; status = "okay"; }; -&usbdrd3_1 { - vbus-supply = <&vcc5v0_typec1>; +&uart2 { status = "okay"; }; -&i2c0 { +&usb_host0_ehci { status = "okay"; - clock-frequency = <400000>; - i2c-scl-falling-time-ns = <50>; - i2c-scl-rising-time-ns = <100>; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - clock-output-names = "xin32k", "wifibt_32kin"; - interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - reg = <0x1b>; - rockchip,system-power-controller; - #clock-cells = <1>; - status = "okay"; +}; - vcc12-supply = <&vcc3v3_sys>; +&usb_host0_ohci { + status = "okay"; +}; - regulators { - vcc33_lcd: SWITCH_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc33_lcd"; - }; - }; - }; +&usb_host1_ehci { + status = "okay"; }; -&mipi_dsi { - status = "disabled"; - rockchip,panel = <&panel>; - display-timings { - timing0 { - bits-per-pixel = <24>; - clock-frequency = <160000000>; - hfront-porch = <120>; - hsync-len = <20>; - hback-porch = <21>; - hactive = <1200>; - vfront-porch = <21>; - vsync-len = <3>; - vback-porch = <18>; - vactive = <1920>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; +&usb_host1_ohci { + status = "okay"; }; &pinctrl { pmic { pmic_int_l: pmic-int-l { rockchip,pins = - <1 21 RK_FUNC_GPIO &pcfg_pull_up>; + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; + }; - pmic_dvs2: pmic-dvs2 { + usb2 { + vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = - <1 18 RK_FUNC_GPIO &pcfg_pull_down>; + <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; -&gmac { - phy-supply = <&vcc_phy>; - phy-mode = "rgmii"; - clock_in_out = "input"; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - tx_delay = <0x28>; - rx_delay = <0x11>; +&vopb { + status = "okay"; +}; + +&vopb_mmu { status = "okay"; };arch/arm/dts/rk3399-ficus.dts +6
-0@@ -146,6 +146,12 @@ }; }; +&spi1 { + /* On both Low speed and High speed expansion */ + cs-gpios = <0>, <&gpio4 RK_PA6 0>, <&gpio4 RK_PA7 0>; + status = "okay"; +}; + &usbdrd_dwc3_0 { dr_mode = "host"; };arch/arm/dts/rk3399-firefly.dts +197
-54@@ -1,19 +1,20 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. */ /dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/pwm/pwm.h> -#include <dt-bindings/pinctrl/rockchip.h> #include "rk3399.dtsi" +#include "rk3399-opp.dtsi" / { model = "Firefly-RK3399 Board"; compatible = "firefly,firefly-rk3399", "rockchip,rk3399"; chosen { - stdout-path = &uart2; + stdout-path = "serial2:1500000n8"; }; backlight: backlight {@@ -63,6 +64,48 @@ #clock-cells = <0>; }; + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; + + work-led { + label = "work"; + default-state = "on"; + gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + }; + + diy-led { + label = "diy"; + default-state = "off"; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + }; + }; + rt5640-sound { compatible = "simple-audio-card"; simple-audio-card,name = "rockchip,rt5640-codec";@@ -102,15 +145,27 @@ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + vcc3v3_pcie: vcc3v3-pcie-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&pcie_drv>; + pinctrl-0 = <&pcie_pwr_en>; regulator-name = "vcc3v3_pcie"; regulator-always-on; regulator-boot-on; + vin-supply = <&dc_12v>; }; vcc3v3_sys: vcc3v3-sys {@@ -120,32 +175,29 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; }; + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&host_vbus_drv>; + pinctrl-0 = <&vcc5v0_host_en>; regulator-name = "vcc5v0_host"; regulator-always-on; + vin-supply = <&vcc_sys>; }; - vcc5v0_sys: vcc5v0-sys { + vcc_sys: vcc-sys { compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; + regulator-name = "vcc_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - }; - - vcc_phy: vcc-phy-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_phy"; - regulator-always-on; - regulator-boot-on; + vin-supply = <&dc_12v>; }; vdd_log: vdd-log {@@ -156,16 +208,7 @@ regulator-boot-on; regulator-min-microvolt = <430000>; regulator-max-microvolt = <1400000>; - regulator-init-microvolt = <950000>; - }; - - vccadc_ref: vccadc-ref { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_sys>; }; };@@ -201,15 +244,22 @@ assigned-clocks = <&cru SCLK_RMII_SRC>; assigned-clock-parents = <&clkin_gmac>; clock_in_out = "input"; - phy-supply = <&vcc_phy>; + phy-supply = <&vcc_lan>; phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x33>; - rx_delay = <0x45>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; status = "okay"; };@@ -231,16 +281,16 @@ rockchip,system-power-controller; wakeup-source; - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - vcc10-supply = <&vcc3v3_sys>; - vcc11-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; vcc12-supply = <&vcc3v3_sys>; vddio-supply = <&vcc1v8_pmu>;@@ -301,12 +351,12 @@ }; }; - vcc3v0_tp: LDO_REG2 { - regulator-name = "vcc3v0_tp"; + vcc2v8_dvp: LDO_REG2 { + regulator-name = "vcc2v8_dvp"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; regulator-state-mem { regulator-off-in-suspend; };@@ -324,8 +374,8 @@ }; }; - vcc_sd: LDO_REG4 { - regulator-name = "vcc_sd"; + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>;@@ -382,7 +432,7 @@ }; }; - vcc3v3_s3: SWITCH_REG1 { + vcc3v3_s3: vcc_lan: SWITCH_REG1 { regulator-name = "vcc3v3_s3"; regulator-always-on; regulator-boot-on;@@ -412,7 +462,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc5v0_sys>; + vin-supply = <&vcc_sys>; regulator-state-mem { regulator-off-in-suspend;@@ -429,7 +479,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc5v0_sys>; + vin-supply = <&vcc_sys>; regulator-state-mem { regulator-off-in-suspend;@@ -476,19 +526,16 @@ &i2s0 { rockchip,playback-channels = <8>; rockchip,capture-channels = <8>; - #sound-dai-cells = <0>; status = "okay"; }; &i2s1 { rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; - #sound-dai-cells = <0>; status = "okay"; }; &i2s2 { - #sound-dai-cells = <0>; status = "okay"; };@@ -497,7 +544,7 @@ bt656-supply = <&vcc1v8_dvp>; audio-supply = <&vcca1v8_codec>; - sdmmc-supply = <&vcc_sd>; + sdmmc-supply = <&vcc_sdio>; gpio1830-supply = <&vcc_3v0>; };@@ -509,7 +556,7 @@ ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; num-lanes = <4>; pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqn>; + pinctrl-0 = <&pcie_clkreqn_cpm>; status = "okay"; };@@ -532,7 +579,7 @@ }; pcie { - pcie_drv: pcie-drv { + pcie_pwr_en: pcie-pwr-en { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; };@@ -570,10 +617,26 @@ }; usb2 { - host_vbus_drv: host-vbus-drv { + vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + work_led_gpio: work_led-gpio { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + diy_led_gpio: diy_led-gpio { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pwm0 {@@ -585,24 +648,70 @@ }; &saradc { - vref-supply = <&vccadc_ref>; + vref-supply = <&vcca1v8_s3>; status = "okay"; }; +&sdio0 { + /* WiFi & BT combo module Ampak AP6356S */ + bus-width = <4>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + + /* Power supply */ + vqmmc-supply = &vcc1v8_s3; /* IO line */ + vmmc-supply = &vcc_sdio; /* card's power */ + + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + brcm,drive-strength = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + &sdmmc { bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; status = "okay"; }; &sdhci { bus-width = <8>; - keep-power-in-suspend; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; non-removable; status = "okay"; }; +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + &tsadc { /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-mode = <1>;@@ -662,3 +771,37 @@ &usb_host1_ohci { status = "okay"; }; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +};arch/arm/dts/rk3399-gru-bob.dts +13
-3@@ -18,11 +18,11 @@ "google,bob", "google,gru", "rockchip,rk3399"; edp_panel: edp-panel { - compatible = "boe,nv101wxmn51", "simple-panel"; + compatible = "boe,nv101wxmn51"; backlight = <&backlight>; power-supply = <&pp3300_disp>; - ports { + port { panel_in_edp: endpoint { remote-endpoint = <&edp_out_panel>; };@@ -68,12 +68,22 @@ &spi0 { status = "okay"; + + cr50@0 { + compatible = "google,cr50"; + reg = <0>; + interrupt-parent = <&gpio0>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_int_od_l>; + spi-max-frequency = <800000>; + }; }; &pinctrl { tpm { h1_int_od_l: h1-int-od-l { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; };arch/arm/dts/rk3399-gru-chromebook.dtsi +21
-19@@ -194,20 +194,25 @@ backlight: backlight { compatible = "pwm-backlight"; - brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - 17 18 19 20 21 22 23 24 25 26 27 28 29 30 - 31 32 33 34 35 36 37 38 39 40 41 42 43 44 - 45 46 47 48 49 50 51 52 53 54 55 56 57 58 - 59 60 61 62 63 64 65 66 67 68 69 70 71 72 - 73 74 75 76 77 78 79 80 81 82 83 84 85 86 - 87 88 89 90 91 92 93 94 95 96 97 98 99 100>; - default-brightness-level = <51>; enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; power-supply = <&pp3300_disp>; pinctrl-names = "default"; pinctrl-0 = <&bl_en>; pwm-delay-us = <10000>; }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>; + + wake_on_bt: wake-on-bt { + label = "Wake-on-Bluetooth"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; }; &ppvar_bigcpu {@@ -232,7 +237,6 @@ &edp { status = "okay"; - rockchip,panel = <&edp_panel>; ports { edp_out: port@1 { reg = <1>;@@ -287,11 +291,9 @@ ap_i2c_tp: &i2c5 { #pwm-cells = <1>; }; - usbc_extcon1: extcon@1 { + usbc_extcon1: extcon1 { compatible = "google,extcon-usbc-cros-ec"; google,usb-port-id = <1>; - - #extcon-cells = <0>; }; };@@ -361,27 +363,27 @@ ap_i2c_tp: &i2c5 { &pinctrl { discrete-regulators { pp1500_en: pp1500-en { - rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; pp1800_audio_en: pp1800-audio-en { - rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>; }; pp3000_en: pp3000-en { - rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; pp3300_disp_en: pp3300-disp-en { - rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO + rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; wlan_module_pd_l: wlan-module-pd-l { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; }; };@@ -389,10 +391,10 @@ ap_i2c_tp: &i2c5 { &wifi { wifi_perst_l: wifi-perst-l { - rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; wlan_host_wake_l: wlan-host-wake-l { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; };arch/arm/dts/rk3399-gru-kevin.dts +26
-8@@ -39,11 +39,25 @@ }; edp_panel: edp-panel { - compatible = "sharp,lq123p1jx31", "simple-panel"; + compatible = "sharp,lq123p1jx31"; backlight = <&backlight>; power-supply = <&pp3300_disp>; - ports { + panel-timing { + clock-frequency = <266666667>; + hactive = <2400>; + hfront-porch = <48>; + hback-porch = <84>; + hsync-len = <32>; + hsync-active = <0>; + vactive = <1600>; + vfront-porch = <3>; + vback-porch = <120>; + vsync-len = <10>; + vsync-active = <0>; + }; + + port { panel_in_edp: endpoint { remote-endpoint = <&edp_out_panel>; };@@ -118,13 +132,17 @@ map0 { trip = <&ppvar_bigcpu_alert>; cooling-device = - <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; contribution = <4096>; }; map1 { trip = <&ppvar_bigcpu_alert>; cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; contribution = <1024>; }; };@@ -286,24 +304,24 @@ ap_i2c_dig: &i2c2 { digitizer { /* Has external pullup */ cpu1_dig_irq_l: cpu1-dig-irq-l { - rockchip,pins = <2 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; /* Has external pullup */ cpu1_dig_pdct_l: cpu1-dig-pdct-l { - rockchip,pins = <2 5 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; discrete-regulators { cpu3_pen_pwr_en: cpu3-pen-pwr-en { - rockchip,pins = <4 30 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pen { cpu1_pen_eject: cpu1-pen-eject { - rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; };arch/arm/dts/rk3399-gru.dtsi +36
-54@@ -11,13 +11,7 @@ / { chosen { - u-boot,dm-pre-reloc; stdout-path = "serial2:115200n8"; - u-boot,spl-boot-order = &spi_flash; - }; - - config { - u-boot,spl-payload-offset = <0x40000>; }; /*@@ -268,17 +262,11 @@ pp5000_usb_a_vbus: pp5000 { }; - gpio_keys: gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l>; - - wake_on_bt: wake-on-bt { - label = "Wake-on-Bluetooth"; - gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WAKEUP>; - wakeup-source; - }; + ap_rtc_clk: ap-rtc-clk { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + #clock-cells = <0>; }; max98357a: max98357a {@@ -354,6 +342,7 @@ cpu-supply = <&ppvar_bigcpu>; }; + &cru { assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>,@@ -549,8 +538,7 @@ ap_i2c_audio: &i2c8 { pinctrl-names = "default", "sleep"; pinctrl-1 = <&spi1_sleep>; - spi_flash: spiflash@0 { - u-boot,dm-pre-reloc; + spiflash@0 { compatible = "jedec,spi-nor"; reg = <0>;@@ -565,16 +553,12 @@ ap_i2c_audio: &i2c8 { &spi5 { status = "okay"; - spi-activate-delay = <100>; - spi-max-frequency = <3000000>; - spi-deactivate-delay = <200>; cros_ec: ec@0 { compatible = "google,cros-ec-spi"; reg = <0>; interrupt-parent = <&gpio0>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - ec-interrupt = <&gpio0 1 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ec_ap_int_l>; spi-max-frequency = <3000000>;@@ -586,11 +570,9 @@ ap_i2c_audio: &i2c8 { #size-cells = <0>; }; - usbc_extcon0: extcon@0 { + usbc_extcon0: extcon0 { compatible = "google,extcon-usbc-cros-ec"; google,usb-port-id = <0>; - - #extcon-cells = <0>; }; }; };@@ -692,29 +674,29 @@ ap_i2c_audio: &i2c8 { backlight-enable { bl_en: bl-en { - rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; cros-ec { ec_ap_int_l: ec-ap-int-l { - rockchip,pins = <RK_GPIO0 1 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; discrete-regulators { sd_io_pwr_en: sd-io-pwr-en { - rockchip,pins = <RK_GPIO2 2 RK_FUNC_GPIO + rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; sd_pwr_1800_sel: sd-pwr-1800-sel { - rockchip,pins = <RK_GPIO2 28 RK_FUNC_GPIO + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; sd_slot_pwr_en: sd-slot-pwr-en { - rockchip,pins = <RK_GPIO4 29 RK_FUNC_GPIO + rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; };@@ -722,17 +704,17 @@ ap_i2c_audio: &i2c8 { codec { /* Has external pullup */ headset_int_l: headset-int-l { - rockchip,pins = <1 23 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; }; mic_int: mic-int { - rockchip,pins = <1 13 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; }; }; max98357a { sdmode_en: sdmode-en { - rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>; }; };@@ -743,7 +725,7 @@ ap_i2c_audio: &i2c8 { * to hack this as gpio, so the EP could be able to * de-assert it along and make ClockPM(CPM) work. */ - rockchip,pins = <2 26 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; };@@ -754,20 +736,20 @@ ap_i2c_audio: &i2c8 { */ sdmmc_bus4: sdmmc-bus4 { rockchip,pins = - <4 8 RK_FUNC_1 &pcfg_pull_none_8ma>, - <4 9 RK_FUNC_1 &pcfg_pull_none_8ma>, - <4 10 RK_FUNC_1 &pcfg_pull_none_8ma>, - <4 11 RK_FUNC_1 &pcfg_pull_none_8ma>; + <4 RK_PB0 1 &pcfg_pull_none_8ma>, + <4 RK_PB1 1 &pcfg_pull_none_8ma>, + <4 RK_PB2 1 &pcfg_pull_none_8ma>, + <4 RK_PB3 1 &pcfg_pull_none_8ma>; }; sdmmc_clk: sdmmc-clk { rockchip,pins = - <4 12 RK_FUNC_1 &pcfg_pull_none_8ma>; + <4 RK_PB4 1 &pcfg_pull_none_8ma>; }; sdmmc_cmd: sdmmc-cmd { rockchip,pins = - <4 13 RK_FUNC_1 &pcfg_pull_none_8ma>; + <4 RK_PB5 1 &pcfg_pull_none_8ma>; }; /*@@ -781,12 +763,12 @@ ap_i2c_audio: &i2c8 { */ sdmmc_cd: sdmmc-cd { rockchip,pins = - <0 7 RK_FUNC_1 &pcfg_pull_none>; + <0 RK_PA7 1 &pcfg_pull_none>; }; /* This is where we actually hook up CD; has external pull */ sdmmc_cd_gpio: sdmmc-cd-gpio { - rockchip,pins = <4 24 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; };@@ -796,47 +778,47 @@ ap_i2c_audio: &i2c8 { * Pull down SPI1 CLK/CS/RX/TX during suspend, to * prevent leakage. */ - rockchip,pins = <1 9 RK_FUNC_GPIO &pcfg_pull_down>, - <1 10 RK_FUNC_GPIO &pcfg_pull_down>, - <1 7 RK_FUNC_GPIO &pcfg_pull_down>, - <1 8 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>, + <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>, + <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>, + <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; }; }; touchscreen { touch_int_l: touch-int-l { - rockchip,pins = <3 13 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; }; touch_reset_l: touch-reset-l { - rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; trackpad { ap_i2c_tp_pu_en: ap-i2c-tp-pu-en { - rockchip,pins = <3 12 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>; }; trackpad_int_l: trackpad-int-l { - rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; wifi: wifi { wlan_module_reset_l: wlan-module-reset-l { - rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_host_wake_l: bt-host-wake-l { /* Kevin has an external pull up, but Gru does not */ - rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; write-protect { ap_fw_wp: ap-fw-wp { - rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; };arch/arm/dts/rk3399-khadas-edge.dtsi +3
-0@@ -654,9 +654,12 @@ sd-uhs-sdr104; vqmmc-supply = <&vcc1v8_s3>; vmmc-supply = <&vccio_sd>; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; brcmf: wifi@1 { + reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;arch/arm/dts/rk3399-leez-p710.dts +18
-18@@ -42,14 +42,14 @@ regulator-max-microvolt = <5000000>; }; - vcc5v0_sys: vcc5v0-sys { + vcc3v3_lan: vcc3v3-lan { compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; + regulator-name = "vcc3v3_lan"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc5v_adp>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vim-supply = <&vcc3v3_sys>; }; vcc3v3_sys: vcc3v3-sys {@@ -83,14 +83,14 @@ vin-supply = <&vcc5v0_sys>; }; - vcc3v3_lan: vcc3v3-lan { + vcc5v0_sys: vcc5v0-sys { compatible = "regulator-fixed"; - regulator-name = "vcc3v3_lan"; + regulator-name = "vcc5v0_sys"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vim-supply = <&vcc3v3_sys>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc5v_adp>; }; vdd_log: vdd-log {@@ -510,6 +510,14 @@ }; }; +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed;@@ -522,14 +530,6 @@ status = "okay"; }; -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - non-removable; - status = "okay"; -}; - &tcphy0 { status = "okay"; };arch/arm/dts/rk3399-nanopc-t4.dts +46
-1@@ -52,13 +52,58 @@ pinctrl-names = "default"; pinctrl-0 = <&ir_rx>; }; + + fan: pwm-fan { + compatible = "pwm-fan"; + /* + * With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels + * work out to 0, ~1200, ~3000, and 5000RPM respectively. + */ + cooling-levels = <0 12 18 255>; + #cooling-cells = <2>; + fan-supply = <&vcc12v0_sys>; + pwms = <&pwm1 0 50000 0>; + }; +}; + +&cpu_thermal { + trips { + cpu_warm: cpu_warm { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_hot: cpu_hot { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map2 { + trip = <&cpu_warm>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map3 { + trip = <&cpu_hot>; + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + +&pcie0 { + num-lanes = <4>; + vpcie3v3-supply = <&vcc3v3_sys>; }; &pinctrl { ir { ir_rx: ir-rx { /* external pullup to VCC3V3_SYS, despite being 1.8V :/ */ - rockchip,pins = <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>; }; }; };arch/arm/dts/rk3399-nanopi4.dtsi +60
-6@@ -48,7 +48,7 @@ }; /* switched by pmic_sleep */ - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + vcc1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed"; regulator-always-on; regulator-boot-on;@@ -71,6 +71,27 @@ vin-supply = <&vcc3v3_sys>; }; + /* + * Really, this is supplied by vcc_1v8, and vcc1v8_s3 only + * drives the enable pin, but we can't quite model that. + */ + vcca0v9_s3: vcca0v9-s3 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vcca0v9_s3"; + vin-supply = <&vcc1v8_s3>; + }; + + /* As above, actually supplied by vcc3v3_sys */ + vcca1v8_s3: vcca1v8-s3 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_s3"; + vin-supply = <&vcc1v8_s3>; + }; + vbus_typec: vbus-typec { compatible = "regulator-fixed"; regulator-min-microvolt = <5000000>;@@ -148,15 +169,28 @@ assigned-clocks = <&cru SCLK_RMII_SRC>; clock_in_out = "input"; pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; + pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>; + phy-handle = <&rtl8211e>; phy-mode = "rgmii"; phy-supply = <&vcc3v3_s3>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; tx_delay = <0x28>; rx_delay = <0x11>; status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8211e: phy@1 { + reg = <1>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + }; + }; }; &gpu {@@ -171,6 +205,10 @@ status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <160>;@@ -446,6 +484,10 @@ status = "okay"; }; +&i2s2 { + status = "okay"; +}; + &io_domains { bt656-supply = <&vcc_1v8>; audio-supply = <&vcca1v8_codec>;@@ -464,7 +506,9 @@ &pcie0 { ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; max-link-speed = <2>; - num-lanes = <4>; + num-lanes = <2>; + vpcie0v9-supply = <&vcca0v9_s3>; + vpcie1v8-supply = <&vcca1v8_s3>; status = "okay"; };@@ -481,6 +525,16 @@ }; }; + phy { + phy_intb: phy-intb { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_rstb: phy-rstb { + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { cpu_b_sleep: cpu-b-sleep { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;arch/arm/dts/rk3399-orangepi.dts +68
-11@@ -136,13 +136,13 @@ vin-supply = <&vcc_sys>; }; - vcc5v0_typec0: vcc5v0-typec0-regulator { + vbus_typec: vbus-typec-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_typec0_en>; - regulator-name = "vcc5v0_typec0"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vbus_typec"; vin-supply = <&vcc_sys>; };@@ -202,14 +202,27 @@ clock_in_out = "input"; phy-supply = <&vcc3v3_s3>; phy-mode = "rgmii"; + phy-handle = <&rtl8211e>; pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; + pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>; tx_delay = <0x28>; rx_delay = <0x11>; status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8211e: phy@1 { + reg = <1>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + }; + }; }; &gpu {@@ -419,6 +432,8 @@ compatible = "silergy,syr827"; reg = <0x40>; fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&cpu_b_sleep>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>;@@ -436,6 +451,8 @@ compatible = "silergy,syr828"; reg = <0x41>; fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpu_sleep>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>;@@ -472,6 +489,7 @@ compatible = "asahi-kasei,ak09911"; reg = <0x0c>; vdd-supply = <&vcc3v3_s3>; + vid-supply = <&vcc3v3_s3>; }; mpu6500@68 {@@ -504,6 +522,16 @@ pinctrl-0 = <&light_int_l>; vdd-supply = <&vcc3v3_s3>; }; + + fusb302@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&chg_cc_int_l>; + vbus-supply = <&vbus_typec>; + }; }; &io_domains {@@ -526,7 +554,25 @@ }; }; + phy { + phy_intb: phy-intb { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_rstb: phy-rstb { + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { + cpu_b_sleep: cpu-b-sleep { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + gpu_sleep: gpu-sleep { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + pmic_int_l: pmic-int-l { rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;@@ -536,7 +582,7 @@ sd { sdmmc0_pwr_h: sdmmc0-pwr-h { rockchip,pins = - <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; };@@ -546,7 +592,7 @@ <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; - vcc5v0_typec0_en: vcc5v0-typec0-en { + vcc5v0_typec_en: vcc5v0-typec-en { rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; };@@ -595,6 +641,12 @@ rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + fusb302 { + chg_cc_int_l: chg-cc-int-l { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; }; &pwm0 {@@ -631,9 +683,12 @@ pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; sd-uhs-sdr104; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; brcmf: wifi@1 { + reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;@@ -676,7 +731,7 @@ status = "okay"; u2phy0_otg: otg-port { - phy-supply = <&vcc5v0_typec0>; + phy-supply = <&vbus_typec>; status = "okay"; };@@ -707,12 +762,14 @@ bluetooth { compatible = "brcm,bcm43438-bt"; clocks = <&rk808 1>; - clock-names = "ext_clock"; + clock-names = "lpo"; device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; }; };arch/arm/dts/rk3399-puma-u-boot.dtsi +19
-6@@ -13,7 +13,7 @@ chosen { stdout-path = "serial0:115200n8"; u-boot,spl-boot-order = \ - "same-as-spl", &spiflash, &sdhci, &sdmmc; + "same-as-spl", &norflash, &sdhci, &sdmmc; }; aliases {@@ -21,10 +21,23 @@ spi1 = &spi5; }; -}; - -&bios_enable { - u-boot,dm-pre-reloc; + /* + * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module + * eMMC and SPI flash powered-down initially (in fact it keeps the + * reset signal asserted). Even though it is an enable signal, we + * model this as a regulator. + */ + bios_enable: bios_enable { + compatible = "regulator-fixed"; + u-boot,dm-pre-reloc; + regulator-name = "bios_enable"; + enable-active-high; + gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; }; &gpio1 {@@ -35,6 +48,6 @@ u-boot,dm-pre-reloc; }; -&spiflash { +&norflash { u-boot,dm-pre-reloc; };arch/arm/dts/rk3399-puma.dtsi +232
-335@@ -1,30 +1,74 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH */ #include <dt-bindings/pwm/pwm.h> #include "rk3399.dtsi" +#include "rk3399-opp.dtsi" / { - model = "Theobroma Systems RK3399-Q7 SoM"; - compatible = "tsd,rk3399-q7", "tsd,puma", "rockchip,rk3399"; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&leds_pins_puma>; + pinctrl-0 = <&led_pin_module>; - module_led { + module-led { label = "module_led"; gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; + panic-indicator; }; + }; - sd_card_led { - label = "sd_card_led"; - gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; + /* + * Overwrite the opp-table for CPUB as this board uses a different + * regulator (FAN53555) that only allows 10mV steps and therefore + * can't reach the operation point target voltages from rk3399-opp.dtsi + */ + /delete-node/ opp-table1; + cluster1_opp: opp-table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <800000>; + clock-latency-ns = <40000>; + }; + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <800000>; + }; + opp02 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <830000>; + opp-suspend; + }; + opp03 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <880000>; + }; + opp04 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <950000>; + }; + opp05 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1030000>; + }; + opp06 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <1100000>; + }; + opp07 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1200000>; + }; + opp08 { + opp-hz = /bits/ 64 <1992000000>; + opp-microvolt = <1230000>; + turbo-mode; }; };@@ -35,78 +79,14 @@ #clock-cells = <0>; }; - dw_hdmi_audio: dw-hdmi-audio { - status = "enabled"; - compatible = "rockchip,dw-hdmi-audio"; - #sound-dai-cells = <0>; - }; - - hdmi_codec: hdmi-codec { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,name = "HDMI-CODEC"; - - simple-audio-card,cpu { - sound-dai = <&i2s2>; - }; - - simple-audio-card,codec { - sound-dai = <&hdmi>; - }; - }; - - hdmi_sound: hdmi-sound { - status = "disabled"; - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,name = "rockchip,hdmi"; - - simple-audio-card,cpu { - sound-dai = <&i2s2>; - }; - simple-audio-card,codec { - sound-dai = <&hdmi>; - }; - }; - - usbhub_enable: usbhub_enable { + vcc1v2_phy: vcc1v2-phy { compatible = "regulator-fixed"; - regulator-name = "usbhub_enable"; - enable-active-low; - gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&host_vbus_drv>; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - /* - * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module - * eMMC and SPI flash powered-down initially (in fact it keeps the - * reset signal asserted). Even though it is an enable signal, we - * model this as a regulator. - */ - bios_enable: bios_enable { - compatible = "regulator-fixed"; - regulator-name = "bios_enable"; - enable-active-high; - gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; + regulator-name = "vcc1v2_phy"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vccadc_ref: vccadc-ref { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vcc5v0_sys>; }; vcc3v3_sys: vcc3v3-sys {@@ -116,16 +96,18 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; }; - vcc5v0_otg: vcc5v0-otg-regulator { + vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; + enable-active-low; pinctrl-names = "default"; - pinctrl-0 = <&otg_vbus_drv>; - regulator-name = "vcc5v0_otg"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; regulator-always-on; + vin-supply = <&vcc5v0_sys>; }; vcc5v0_sys: vcc5v0-sys {@@ -136,48 +118,55 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; +}; - vcc_phy: vcc-phy-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_phy"; - regulator-always-on; - regulator-boot-on; - }; +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 1>; - regulator-name = "vdd_log"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - regulator-init-microvolt = <950000>; - }; +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; }; &emmc_phy { status = "okay"; + drive-impedance-ohm = <33>; }; &gmac { - phy-supply = <&vcc_phy>; - phy-mode = "rgmii"; - clock_in_out = "input"; - snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <2 10000 50000>; assigned-clocks = <&cru SCLK_RMII_SRC>; assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc1v2_phy>; + phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; tx_delay = <0x10>; rx_delay = <0x10>; status = "okay"; }; -&hdmi { - #sound-dai-cells = <0>; +&gpu { + mali-supply = <&vdd_gpu>; status = "okay"; };@@ -187,37 +176,17 @@ i2c-scl-falling-time-ns = <4>; clock-frequency = <400000>; - vdd_gpu: vdd_gpu { - status = "okay"; - compatible = "fcs,fan53555"; - reg = <0x60>; - vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; - vin-supply = <&vcc5v0_sys>; - regulator-compatible = "fan53555-reg"; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1230000>; - regulator-ramp-delay = <1000>; - fcs,suspend-voltage-selector = <1>; - regulator-always-on; - regulator-boot-on; - regulator-initial-state = <3>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - rk808: pmic@1b { compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio1>; - interrupts = <22 IRQ_TYPE_LEVEL_LOW>; // TODO check interrupt? + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; rockchip,system-power-controller; wakeup-source; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; vcc1-supply = <&vcc5v0_sys>; vcc2-supply = <&vcc5v0_sys>;@@ -234,44 +203,44 @@ regulators { vdd_center: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vdd_center"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; - regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_cpu_l: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vdd_cpu_l"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; - regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; regulator-always-on; regulator-boot-on; - regulator-name = "vcc_ddr"; regulator-state-mem { regulator-on-in-suspend; }; }; vcc_1v8: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>;@@ -279,32 +248,32 @@ }; vcc_ldo1: LDO_REG1 { - regulator-boot-on; + regulator-name = "vcc_ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc_ldo1"; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc1v8_hdmi: LDO_REG2 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc1v8_hdmi"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc1v8_hdmi"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc1v8_pmu: LDO_REG3 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc1v8_pmu"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc1v8_pmu"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>;@@ -312,11 +281,11 @@ }; vcc_sd: LDO_REG4 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc_sd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; - regulator-name = "vcc_sd"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3000000>;@@ -324,79 +293,105 @@ }; vcc_ldo5: LDO_REG5 { - regulator-boot-on; + regulator-name = "vcc_ldo5"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - regulator-name = "vcc_ldo5"; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_ldo6: LDO_REG6 { - regulator-boot-on; + regulator-name = "vcc_ldo6"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; - regulator-name = "vcc_ldo6"; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc0v9_hdmi: LDO_REG7 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc0v9_hdmi"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; - regulator-name = "vcc0v9_hdmi"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_efuse: LDO_REG8 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc_efuse"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc_efuse"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; regulator-always-on; regulator-boot-on; - regulator-name = "vcc3v3_s3"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; regulator-always-on; regulator-boot-on; - regulator-name = "vcc3v3_s0"; regulator-state-mem { regulator-off-in-suspend; }; }; }; }; + + vdd_gpu: regulator@60 { + compatible = "fcs,fan53555"; + reg = <0x60>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1230000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&i2c7 { + status = "okay"; + clock-frequency = <400000>; + + fan: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + #cooling-cells = <2>; + }; + + rtc_twi: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; }; &i2c8 { status = "okay"; clock-frequency = <400000>; - vdd_cpu_b: vdd_cpu_b { - status = "okay"; + vdd_cpu_b: regulator@60 { compatible = "fcs,fan53555"; reg = <0x60>; - vsel-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; vin-supply = <&vcc5v0_sys>; - regulator-compatible = "fan53555-reg"; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <1230000>;@@ -404,48 +399,36 @@ fcs,suspend-voltage-selector = <1>; regulator-always-on; regulator-boot-on; - regulator-initial-state = <3>; - regulator-state-mem { - regulator-off-in-suspend; - }; }; }; &i2s0 { + pinctrl-0 = <&i2s0_2ch_bus>; + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; status = "okay"; - rockchip,i2s-broken-burst-len; - rockchip,playback-channels = <8>; - rockchip,capture-channels = <8>; - #sound-dai-cells = <0>; }; -&i2s2 { - #sound-dai-cells = <0>; - status = "okay"; +/* + * As Q7 does not specify neither a global nor a RX clock for I2S these + * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO. + * Therefore we have to redefine the i2s0_2ch_bus definition to prevent + * conflicts. + */ +&i2s0_2ch_bus { + rockchip,pins = + <3 RK_PD0 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>; }; &io_domains { status = "okay"; - - bt656-supply = <&vcc_1v8>; /* bt656_gpio2ab_ms */ - audio-supply = <&vcc_1v8>; /* audio_gpio3d4a_ms */ - sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */ - gpio1830-supply = <&vcc_1v8>; /* gpio1833_gpio4cd_ms */ -}; - -&pcie0 { - assigned-clocks = <&cru SCLK_PCIEPHY_REF>; - assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>; - assigned-clock-rates = <100000000>; - ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqn>; - status = "okay"; -}; - -&pcie_phy { - status = "okay"; + bt656-supply = <&vcc_1v8>; + audio-supply = <&vcc_1v8>; + sdmmc-supply = <&vcc_sd>; + gpio1830-supply = <&vcc_1v8>; }; &pmu_io_domains {@@ -453,185 +436,99 @@ pmu1830-supply = <&vcc_1v8>; }; -&pwm0 { - status = "okay"; -}; - &pwm2 { status = "okay"; }; -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - supports-emmc; - non-removable; - keep-power-in-suspend; - mmc-hs400-enhanced-strobe; - status = "okay"; -}; - -&sdmmc { - clock-frequency = <150000000>; - max-frequency = <40000000>; - supports-sd; - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - disable-wp; - num-slots = <1>; - vqmmc-supply = <&vcc_sd>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "disabled"; -}; - -&usb_host0_ohci { - status = "disabled"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usb_host1_ehci { - status = "disabled"; -}; - -&usb_host1_ohci { - status = "disabled"; -}; - -&usbdrd3_1 { - status = "okay"; - tsd,usb-port-power = "usbhub_enable"; -}; - -&vopb { - status = "okay"; -}; - &pinctrl { - /* Pins that are not explicitely used by any devices */ - pinctrl-names = "default"; - pinctrl-0 = <&puma_pin_hog>; - - hog { - puma_pin_hog: puma_pin_hog { + i2c8 { + i2c8_xfer_a: i2c8-xfer { rockchip,pins = - /* We need pull-ups on Q7 buttons */ - <RK_GPIO0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, /* LID_BTN# */ - <RK_GPIO0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, /* BATLOW# */ - <RK_GPIO0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, /* SLP_BTN# */ - <RK_GPIO0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; /* BIOS_DISABLE# */ + <1 RK_PC4 1 &pcfg_pull_up>, + <1 RK_PC5 1 &pcfg_pull_up>; }; }; - pmic { - pmic_int_l: pmic-int-l { + leds { + led_pin_module: led-module-gpio { rockchip,pins = - <RK_GPIO1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; + <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; - leds_pins_puma: led_pins@0 { - rockchip,pins = - <RK_GPIO2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>, - <RK_GPIO1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - usb2 { - otg_vbus_drv: otg-vbus-drv { - rockchip,pins = - <RK_GPIO0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - host_vbus_drv: host-vbus-drv { + pmic { + pmic_int_l: pmic-int-l { rockchip,pins = - <RK_GPIO4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; - i2c8 { - i2c8_xfer_a: i2c8-xfer { + usb2 { + vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = - <RK_GPIO1 RK_PC5 RK_FUNC_1 &pcfg_pull_up>, - <RK_GPIO1 RK_PC4 RK_FUNC_1 &pcfg_pull_up>; + <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; -&i2c1 { +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; status = "okay"; - clock-frequency = <400000>; }; -&i2c2 { - status = "okay"; - clock-frequency = <400000>; + +&sdmmc { + vqmmc-supply = <&vcc_sd>; }; -&i2c4 { + +&spi1 { status = "okay"; - clock-frequency = <400000>; + + norflash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; }; -&i2c6 { + +&tcphy1 { status = "okay"; - clock-frequency = <400000>; }; -&i2c6_xfer { - /* Enable pull-ups, the pins would float otherwise. */ - rockchip,pins = - <RK_GPIO2 RK_PB2 RK_FUNC_2 &pcfg_pull_up>, - <RK_GPIO2 RK_PB1 RK_FUNC_2 &pcfg_pull_up>; +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + status = "okay"; }; -&i2c7 { +&u2phy1 { status = "okay"; - clock-frequency = <400000>; - rtc_twi: rtc@6f { - compatible = "isil,isl1208"; - reg = <0x6f>; + u2phy1_otg: otg-port { + status = "okay"; }; - fan: fan@18 { - compatible = "ti,amc6821"; - reg = <0x18>; - cooling-min-state = <0>; - cooling-max-state = <9>; - #cooling-cells = <2>; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; }; }; -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts>; +&usbdrd3_1 { status = "okay"; }; - -&spi1 { +&usbdrd_dwc3_1 { status = "okay"; + dr_mode = "host"; +}; - #address-cells = <1>; - #size-cells = <0>; - - spiflash: w25q32dw@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <49500000>; - spi-cpol; - spi-cpha; - }; +&usb_host1_ehci { + status = "okay"; }; -&spi5 { +&usb_host1_ohci { status = "okay"; };arch/arm/dts/rk3399-roc-pc-u-boot.dtsi +36
-0@@ -14,9 +14,45 @@ chosen { u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc; }; + + vcc_hub_en: vcc_hub_en-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_rst>; + regulator-name = "vcc_hub_en"; + regulator-always-on; + }; +}; + +/* + * should be placed inside mp8859, but not until mp8859 has + * its own dt-binding. + */ +&dc_12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <&vcc_vbus_typec0>; }; &vdd_log { regulator-min-microvolt = <430000>; regulator-init-microvolt = <950000>; }; + +&vcc5v0_host { + regulator-always-on; +}; + +&vcc_sys { + regulator-always-on; +}; + +&vcc_sdio { + regulator-always-on; +};arch/arm/dts/rk3399-roc-pc.dts +1
-2@@ -8,6 +8,5 @@ / { model = "Firefly ROC-RK3399-PC Board"; - compatible = "libretech,roc-rk3399-pc", "firefly,roc-rk3399-pc", - "rockchip,rk3399"; + compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; };arch/arm/dts/rk3399-roc-pc.dtsi +18
-17@@ -110,20 +110,6 @@ regulator-max-microvolt = <5000000>; }; - /* - * should be placed inside mp8859, but not until mp8859 has - * its own dt-binding. - */ - dc_12v: mp8859-dcdc1 { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <&vcc_vbus_typec0>; - }; - /* switched by pmic_sleep */ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed";@@ -176,7 +162,6 @@ pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en &hub_rst>; regulator-name = "vcc5v0_host"; - regulator-always-on; vin-supply = <&vcc_sys>; };@@ -198,7 +183,6 @@ pinctrl-names = "default"; pinctrl-0 = <&vcc_sys_en>; regulator-name = "vcc_sys"; - regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>;@@ -392,7 +376,6 @@ vcc_sdio: LDO_REG4 { regulator-name = "vcc_sdio"; - regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>;@@ -549,6 +532,24 @@ vbus-supply = <&vcc_vbus_typec0>; status = "okay"; }; + + mp8859: regulator@66 { + compatible = "mps,mp8859"; + reg = <0x66>; + dc_12v: mp8859_dcdc { + regulator-name = "dc_12v"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_vbus_typec0>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <12000000>;Lines of this file are not shown. View the raw message.
arch/arm/dts/rk3399-rockpro64.dtsi new file +797
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
Part of the diff is not shown here. View the raw message.
PATCH v2 5/6 arm: dts: rk3399: Sync roc-pc-mezzanine from v5.7-rc1
In reply to a message not in the archiveSync Firefly ROC-RK3399-PC Mezzanine Board dts file from Linux v5.7-rc1.
---
Changes for v2:
- none
arch/arm/dts/Makefile | 1 + arch/arm/dts/rk3399-roc-pc-mezzanine.dts | 93 ++++++++++++++++++++++++ 2 files changed, 94 insertions(+) create mode 100644 arch/arm/dts/rk3399-roc-pc-mezzanine.dts
arch/arm/dts/Makefile +1 -0
@@ -131,6 +131,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \ rk3399-puma-ddr1600.dtb \ rk3399-puma-ddr1866.dtb \ rk3399-roc-pc.dtb \ + rk3399-roc-pc-mezzanine.dtb \ rk3399-rock-pi-4.dtb \ rk3399-rock960.dtb \ rk3399-rockpro64.dtb
arch/arm/dts/rk3399-roc-pc-mezzanine.dts new file +93 -0
93 lines not on this page · raw message
Signature · 1 line
2.17.1
A message that is not in the archive (sent off-list or not yet received): 20200428100019.19155-6-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org
Kever Yang
Reviewed-byRe: [PATCH v2 5/6] arm: dts: rk3399: Sync roc-pc-mezzanine from v5.7-rc1
Quoted 5 lines · Jagan Teki
Sync Firefly ROC-RK3399-PC Mezzanine Board dts file from Linux v5.7-rc1.
Signed-off-by Suniel Mahesh <[email protected]>Signed-off-by Jagan Teki <[email protected]>
Thanks,
- Kever
Quoted 110 lines
---
Changes for v2:
- nonearch/arm/dts/Makefile | 1 + arch/arm/dts/rk3399-roc-pc-mezzanine.dts | 93 ++++++++++++++++++++++++ 2 files changed, 94 insertions(+)create mode 100644
arch/arm/dts/rk3399-roc-pc-mezzanine.dtsarch/arm/dts/Makefile +1
-0@@ -131,6 +131,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \ rk3399-puma-ddr1600.dtb \ rk3399-puma-ddr1866.dtb \ rk3399-roc-pc.dtb \ + rk3399-roc-pc-mezzanine.dtb \ rk3399-rock-pi-4.dtb \ rk3399-rock960.dtb \ rk3399-rockpro64.dtbarch/arm/dts/rk3399-roc-pc-mezzanine.dts new file +83
-0@@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd + * Copyright (c) 2019 Markus Reichl <[email protected]> + */ + +/dts-v1/; +#include "rk3399-roc-pc.dtsi" + +/ { + model = "Firefly ROC-RK3399-PC Mezzanine Board"; + compatible = "firefly,roc-rk3399-pc-mezzanine", "rockchip,rk3399"; + + vcc3v3_ngff: vcc3v3-ngff { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_ngff"; + enable-active-high; + gpio = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_ngff_en>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc3v3_pcie: vcc3v3-pcie { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + enable-active-high; + gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_pcie_en>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_perst>; + vpcie3v3-supply = <&vcc3v3_pcie>; + vpcie1v8-supply = <&vcc1v8_pmu>; + vpcie0v9-supply = <&vcca_0v9>; + status = "okay"; +}; + +&pinctrl { + ngff { + vcc3v3_ngff_en: vcc3v3-ngff-en { + rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + vcc3v3_pcie_en: vcc3v3-pcie-en { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_perst: pcie-perst { + rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104;
arch/arm/dts/rk3399-roc-pc-mezzanine.dts line 93
Quoted 10 lines
arch/arm/dts/rk3399-roc-pc-mezzanine.dts new file +10
-0+ vmmc-supply = <&vcc3v3_ngff>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; +};
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
PATCH v2 6/6 rk3399: Add ROC-RK3399-PC Mezzanine board
In reply to a message not in the archiveFrom: Suniel Mahesh <sunil-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Add Firefly ROC-RK3399-PC Mezzanine board which is an extension board on top of roc-rk3399-pc.
Will drop the separate defconfig file, once we support the board detection at runtime.
---
Changes for v2:
- include rk3399-roc-pc-u-boot.dtsi
.../dts/rk3399-roc-pc-mezzanine-u-boot.dtsi | 6 ++ board/firefly/roc-pc-rk3399/MAINTAINERS | 2 + configs/roc-pc-mezzanine-rk3399_defconfig | 67 +++++++++++++++++++ 3 files changed, 75 insertions(+) create mode 100644 arch/arm/dts/rk3399-roc-pc-mezzanine-u-boot.dtsi create mode 100644 configs/roc-pc-mezzanine-rk3399_defconfig
arch/arm/dts/rk3399-roc-pc-mezzanine-u-boot.dtsi new file +6 -0
@@ -0,0 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2020 Amarula Solutions(India) + */ + +#include "rk3399-roc-pc-u-boot.dtsi"
board/firefly/roc-pc-rk3399/MAINTAINERS +2 -0
@@ -1,6 +1,8 @@ ROC-RK3399-PC M: Levin Du <[email protected]> +M: Suniel Mahesh <sunil-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> S: Maintained F: board/firefly/roc-pc-rk3399 F: include/configs/roc-pc-rk3399.h F: configs/roc-pc-rk3399_defconfig +F: configs/roc-pc-mezzanine-rk3399_defconfig
configs/roc-pc-mezzanine-rk3399_defconfig new file +67 -0
67 lines not on this page · raw message
Signature · 1 line
2.17.1
A message that is not in the archive (sent off-list or not yet received): 20200428100019.19155-7-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org
Kever Yang
Reviewed-byRe: [PATCH v2 6/6] rk3399: Add ROC-RK3399-PC Mezzanine board
Quoted 10 lines · Jagan Teki
From: Suniel Mahesh <[email protected]>
Add Firefly ROC-RK3399-PC Mezzanine board which is an extension board on top of roc-rk3399-pc.
Will drop the separate defconfig file, once we support the board detection at runtime.
Signed-off-by Suniel Mahesh <[email protected]>Signed-off-by Jagan Teki <[email protected]>
Thanks,
- Kever
Quoted 99 lines
---
Changes for v2:
- includerk3399-roc-pc-u-boot.dtsi.../dts/rk3399-roc-pc-mezzanine-u-boot.dtsi | 6 ++ board/firefly/roc-pc-rk3399/MAINTAINERS | 2 + configs/roc-pc-mezzanine-rk3399_defconfig | 67 +++++++++++++++++++ 3 files changed, 75 insertions(+)create mode 100644
arch/arm/dts/rk3399-roc-pc-mezzanine-u-boot.dtsicreate mode 100644 configs/roc-pc-mezzanine-rk3399_defconfigarch/arm/dts/rk3399-roc-pc-mezzanine-u-boot.dtsi new file +6
-0@@ -0,0 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2020 Amarula Solutions(India) + */ + +#include "rk3399-roc-pc-u-boot.dtsi"board/firefly/roc-pc-rk3399/MAINTAINERS +2
-0@@ -1,6 +1,8 @@ ROC-RK3399-PC M: Levin Du <[email protected]> +M: Suniel Mahesh <[email protected]> S: Maintained F: board/firefly/roc-pc-rk3399 F: include/configs/roc-pc-rk3399.h F: configs/roc-pc-rk3399_defconfig +F: configs/roc-pc-mezzanine-rk3399_defconfigconfigs/roc-pc-mezzanine-rk3399_defconfig new file +57
-0@@ -0,0 +1,67 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_TEXT_BASE=0x00200000 +CONFIG_ENV_OFFSET=0x3F8000 +CONFIG_ROCKCHIP_RK3399=y +CONFIG_TARGET_ROC_PC_RK3399=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEBUG_UART_BASE=0xFF1A0000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc-mezzanine.dtb" +CONFIG_DISPLAY_BOARDINFO_LATE=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 +CONFIG_TPL=y +CONFIG_TPL_GPIO_SUPPORT=y +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TIME=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="rk3399-roc-pc-mezzanine" +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_PMIC_RK8XX=y +CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_RAM_RK3399_LPDDR4=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_ROCKCHIP_SPI=y +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y
configs/roc-pc-mezzanine-rk3399_defconfig line 67
Quoted 10 lines
configs/roc-pc-mezzanine-rk3399_defconfig new file +10
-0+CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_USB_KEYBOARD=y +CONFIG_SPL_TINY_MEMSET=y +CONFIG_ERRNO_STR=y +CONFIG_DM_VIDEO=y +CONFIG_VIDEO_BPP16=y +CONFIG_VIDEO_BPP32=y +CONFIG_DISPLAY=y +CONFIG_VIDEO_ROCKCHIP=y +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip